807161
7
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
If you would like to increase the speed by another level, press again. The
setting chosen is indicated by the number of LEDs illuminated under-
neath the button (5).
4. Activate swing mode by pressing the vertical swing mode button (6).
The appliance now swings at an angle of approx. -5°85° to ensure
optimum distribution of cooling air throughout the room. Press the swing
mode button (6) again if the appliance is to remain at a certain angle.
When the vertical swing function is activated, the LED underneath the
button (6) will light up.
5. For optimum distribution of cooling air from left to right, activate the
horizontal swing function (7). Together with the vertical swing function,
this will create 3D air circulation throughout the whole room. There are
3 angle settings to choose from for the horizontal swing function: 60°,
90° or 180°. To select a setting, press the button for the horizontal swing
function (7) until the LED underneath your chosen angle setting lights
up. If the LED underneath the button (7) is not illuminated, the horizontal
swing function is deactivated.
6. Press the button for the selection of “Natural Breeze” mode (8) for natu-
ral wind conditions. The blue LED beneath the button (8) will now light
up. This mode provides an even more pleasant cooling effect, simulat-
ing a natural breeze. The fan speed of this breeze automatically varies
depending on the selected speed level.
7. By pressing the button for the timer (9) you can set the operating time
for between 1 and 7 hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h =
1 h, 2 h and 4 h LEDs lit). The selected time is displayed below the timer
button (9) with blue LEDs. Press once to set the operating time to 1 h,
press the button again for 2 h, and so on. The remaining time is indicated
by the illuminated LEDs below the timer button (9). The unit switches
off automatically after the set operating time has elapsed. If no LEDs
are lit below the timer button (9), the unit is set to continuous operation.
8. Switch off the appliance by pressing the on/off button (4).
9. The remote control (10) is magnetically attached to the right-hand side
of the device. It operates via infrared – for this purpose, point the remote
control at the infrared receiver (11) on the front of the unit. The battery
compartment (12) is on the back of the remote control (10). Press the
safety slider first of all and then pull down to open the battery com-
partment.
Cleaning
Prior to any maintenance, cleaning and after each use, switch off the appli-
ance and unplug the mains cable (3) from the socket.
Attention: Never submerge the appliance in water (danger of short-circuit).
For external cleaning, rub with a damp cloth and then dry thoroughly.
Make sure that the air inlet (13) and air outlet (14) are cleaned regularly to
prevent the build-up of dust. The air inlet (13) can be cleaned with a dry
brush or a vacuum cleaner.
The air outlet grille (14) can be removed, making the fan blade (15) easy
to clean. Before doing so, make sure that the device is disconnected from
the mains. Gently turn the housing to a vertical position (see photo on
page 6). First of all, remove the screw (16) underneath on the housing.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stadler Form Leo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stadler Form Leo in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info