680613
18
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
4. Maintenance Instructions
The pressure tank unit is entirely maintenance-free.
If the pump gets blocked it will first have to be rinsed out.
Connect the pump after removing delivery pipe to the
water pipe and let water flow into the suction pipe.
While water is flowing into the pump, engage it several
times for about 2 seconds.
In this way it is possible to eliminate most blockages.
J5C74A48B0A8B:>55A>BCC74?D<?70BC>144<?C843
completely.
J-74=C74?D<?8B=>C6>8=6C>14DB435>A0;>=6C8<4
for instance in the winter period, it is recommended to
rinse out the pump thoroughly with water, empty it
completely and store it in a dry place.
J 742: F74C74AC74 ?D<? F>A:B 5A44;H1H 1A845;H
connecting and disconnecting it.
J*74=58;;C74?D<?0608=F8C7C7434;8E4AH;8@D830=3B4C
it up for use.
Adjusting connection and cut-off pressure.
The pressure tanks unit are factory set with an operating
pressure of 1,482,8 or 1,683,2 bar (see table of
specifications). The connection and cut-off pressure can
be adjusted and may be set the desired pressure onto
according to your need by means of the switch (see
figure).
1 = Connection pressure
2 = Cut-off pressure
Take the protective cover off the pressure
switch. With a screwdriver, turn onto - or +
according to need. Check the pressure with
the pressure gauge.
CAUTION!
In order to work, the pump must always be filled
with the delivery liquid until it overflows!
Caution: The pump must never run dry. The
manufacturer’s warranty is null and void in the
event of damage to the pump caused by its running
dry.
Check that the pump is airtight; piping that is not
airtight draws in air preventing the pump from
working properly.
If it is not possibile to eliminate the trouble, please call our service department.
To avoid damage during transport, please ship in the ORIGINAL PACKING.
5. Troubleshooting Table
Trouble Cause Remedy
Motor will not start
Pump will not suck
Insufficient rate of flow
The thermal cut-out switch cuts
off the pump
J $><08=BE>;C064
J &D<?8<?4;;4A90<<43
Thermostat detached.
J742:E>;C064
J8B<0=C;4C74?D<?0=32;40=8C
J )D2C8>=E0;E4=>C8=F0C4A
J &D<?270<14AF8C7=>F0C4A
J 8A8=BD2C8>=?8?4
J )D2C8>=E0;E4=>C08AC867C
J )D2C8>=A>B4BD2C8>=E0;E42;>6643
J #0GBD2C8>=74867C4G244343
J &DCC74BD2C8>=E0;E48=C>F0C4A
(min. 30 cm.)
J &>DAF0C4A8=C>C74BD2C8>=D=8>=
J 742:C74B40;>5C74BD2C?8?4
J ;40=C74BD2C8>=E0;E4
J ;40=C74BD2C8>=A>B4
J 742:C74BD2C8>=74867C
J )D2C8>=74867CC>>7867
J 8ACHBD2C8>=A>B4
J -0C4A;4E4;50;;B@D82:;H
J &D<?5;>FA0C4A43D2431H5>A486=
bodies.
J742:BD2C8>=74867C
J;40=C74BD2C8>=A>B4
J)4CC74BD2CE0;E4;>F4A3>F=
J;40=C74?D<?0=3A4?;024C74F>A=
parts.
J #>C>A>E4A;>0343
Friction too great due to foreign bodies.
J;8<8=0C4C745>A486=1>384B
Wait for the thermal cut-out switch to
CA8664A0608=0??A>G<8=B
Pump connects with very low
water intake
J &A4BBDA4>508A2DB78>=8=C7434;8E4AH
tank too low.
JIncrease the pressure of the air cushion
in the filling valve (1.5 bar)
15
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Speroni CAM 66-25 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Speroni CAM 66-25 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info