733469
11
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Page 9 of 20
NOTE: For optimal performance, Specialized suggests that the rear brake and rear derailleur housings enter the hood scoop on the non-drive-side of the
frame, while the front derailleur and Command Post IR enter the hood scoop on the drive-side of the frame. However, these are only recommendations.
The setup should be done based on the particular needs of the chosen components and rider preferences.
Fig.2: Choose the entry and exit port hood scoops that match the desired component selection (fig.1). Each frame has its own predetermined
selection of hood scoops installed at the factory, with the additional hood scoop options supplied in the parts bag.
ENTRY PORT HOOD SCOOPS
5/4mm: Rear brake (5mm), derailleur (4mm)
4/4mm: Derailleurs and/or Command Post IR
4mm: Derailleur or Command Post IR
0mm: Blank
EXIT PORT HOOD SCOOPS
4/4/5mm: Derailleurs (4mm) and rear brake (5mm)
4/5mm: Rear derailleur (4mm) and rear brake (5mm)
5/4
mm
4/4
mm
4
mm
0
mm
4/4/5
mm
4/5
mm
2
ENTRY PORT HOOD SCOOPS EXIT PORT HOOD SCOOPS
Measure out the cable housing lengths for the chosen components (derailleur, Command Post) by running the housings from the handlebar
controls, along the underside of the down tube and to the receiving component. Cut each length of cable housing with an additional few inches to
accommodate changes during the final installation.
TECH TIP: To keep track of the intended component for each cable, mark each cable with a piece of tape for the correct component.
NOTE: Mechanical cable actuated rear brakes can be installed in the same way as derailleur and Command Post cables. Hydraulic brakes are installed
in the opposite direction. Refer to pages page 10 and page 11 for additional information.
NOTE: If running a Command Post IR, it is recommended to refer to the Command Post IR Adjustable-Height Seatpost Instruction Guide, and complete
the installation of the Command Post IR cable housing before installing any other cable housing.
3
Rear
derailleur
Rear
brake
Front
derailleur
4
Fig.3: To help simplify the installation of the cable housings, designate a derailleur cable housing for each component (derailleur, brake, Command
Post) and mark each cable with tape. Run each derailleur cable through the proper entry port hole with the cable head entering first.
Fig.4: Guide each cable out through the exit port hole. If necessary, use a hooked dental pick.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Specialized FSR - 2015 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Specialized FSR - 2015 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info