552581
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
Version 06/13
TV wall holder 81-160 cm
(32-63”) 60 kg
Item no. 52 75 06
Pay special attention to your safety when using electric tools (e.g. a drill). You should also heed
the safety instructions in corresponding operating instructions.
Make sure there are no persons in the area under the TV wall holder or the TV set while you carry
out the installation.
Please observe the images on the attachment sheet in these operating instructions.
Preparation of the TV set
It is usually necessary to remove the TV set’s base before mounting the device on a TV holder. For this purpose,
observe the operating instructions for your TV set.
Put the TV set at down on a soft and clean underlay, the display side facing downwards. Do not apply pressure
onto the display. Protect valuable furniture surfaces during installation by using a suitable pad or cloth.
Remove the present base of the TV set. Depending on the TV set, this base is either screwed on or clipped in.
Image 2
Choose the position and the height of the mounting frame at the mounting location.
Align the mounting frame horizontally using the integrated water level.
Draw the required boreholes on the mounting surface. In this process, use the mounting frame as a template.
Drill the required holes and put the suitable dowels in the boreholes (B or special dowels).
Screw the mounting frame tightly using suitable screws (A or screws matching the dowels) and washers (C).
Image 3
Attach the two mounting brackets to the back of your TV set using suitable screws (D-F) and washers (C or J).
When mounting the brackets, make sure the openings of the bracket hooks face towards the TV set’s underside,
and the screw heads for the inclination adjustment point outwards.
When xing the mounting brackets, make absolutely certain that you use the correct screws. Not
only must these be of the correct thread type for the TV set, but they must also not be too long;
otherwise they will damage the TV set.
The screws must not be too short, however, since otherwise the connection will not be secure.
The screws must be screwed into the screw thread on the TV set with at least 5 full 360° turns.
If you have any doubt about the correct length of the screws required, we recommend that you
contact the TV manufacturer or an appropriate specialist.
Do not apply force when screwing tight, otherwise you may damage the TV set and void your warranty.
Should your TV set have a curved back or should the wall distance have to be increased for any other reason, you
can insert distance pieces (K or L) between TV set and mounting brackets. In this case, you have to use longer
screws (G-I) for the fastening.
Fully screw open the safety screws on the bottom side of the brackets so that you can insert the brackets into the
pro le of the mounting frame without any problem.
Image 4
Lift the TV set with the mounted brackets and place it onto the mounting frame from the top. To this end, the upper
side of the TV set has to be inclined slightly towards the wall.
The upper openings of the mounting brackets must be inserted neatly into the pro le of the mounting frame.
Center the TV set on the frame and tilt it until it touches the bottom part of the mounting frame.
Screw in the safety screws on the lower openings of the brackets in order to secure the TV set on the mounting
frame.
Image 5
Slightly loosen the screws of the inclination adjustment (3) using the wrenches enclosed (M and N) and adjust the
desired inclination angle as shown in the image.
Re-tighten the screws of the inclination adjustment after this adjustment.
Maintenance and Care
The product does not have to be serviced and, except for occasional cleaning with a soft, dry cloth, requires no
maintenance whatsoever.
Never use aggressive cleaning agents or chemical solutions as these may damage the surface of the case.
Technical Data
TV size ................................... 81-160 cm (32-63”)
Load capacity ........................ max. 60 kg
VESA xture .......................... max. 600 x 400
Wall distance ......................... 42 mm
Material .................................. Steel
OPERATING INSTRUCTIONS
Intended use
The TV wall holder is used for mounting suitable TV sets to walls.
The TV set may not exceed the values for TV size and weight indicated in the section “Technical Data”.
Any use other than described above will lead to damage of this product or the TV set and it furthermore involves risks,
such as damages to furniture close to the wall holder, personal injuries etc.
No part of the product may be modi ed or altered.
The safety instructions must be observed at all times.
Package content
See image 1 on the attachment sheet of this manual.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions. We do not assume any liability for any resulting damage.
We shall not accept liability for damage to property or personal injury caused by incorrect hand-
ling or non-compliance with the safety instructions. In such cases, the warranty will be null and
void.
The exclamation mark symbol indicates that important information is included in these operating
instructions.
The arrow symbol indicates tips and notes
A TV wall holder is not a toy. Keep the device out of the reach of children.
Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
Selecting an unsuitable installation location can lead to personal or material damage.
Proceed with care when assembling and installing the product. The product may have sharp edges. There is a risk
of injury!
Carry out only the work on the TV wall holder that is necessary in order to install it (or to adjust it). Never perform
any conversion or repair work.
Before beginning the installation process, check whether there are appropriate mounting options for a TV wall holder
on the back of the TV set.
Depending on the size and design of the TV set and TV wall holder concerned, it is sensible for a second person to
help with the installation. This person can hold the TV set while you are attaching the TV set to the wall holder.
Apply your full concentration when carrying out the installation, because if the TV set and TV wall holder were to fall,
this could cause expensive damage to the equipment and there is the potential danger of personal injury!
Lay all the TV set’s cables in such a way that they do not get jammed or kinked in the monitor holder.
Check all the screw ttings from time to time. Adjusting the position of the TV set and/or the wall holder and moving
them can sometimes cause the screws to become loose over time.
Do not apply force when adjusting/moving the TV set or the TV wall holder. The TV set may get damaged from it.
When moving/adjusting the TV set or the wall holder, do not press on the TV set’s screen.
Do not overload the TV wall holder. Pay attention to the details provided by the manufacturer for the maximum TV
set weight and/or its size.
Do not use the TV wall holder to support yourself or to hold onto.
Do not x any objects to the TV wall holder other than the TV set for which it was intended.
In case of doubt, do not carry out the installation yourself. Let an expert carry out the installation.
Installation
Wall-mounting is permissible only where the wall concerned is of the correct type and condition.
Lightweight partition walls or those made from gypsum boards are normally unsuitable. However,
specialist retailers do sometimes stock special dowel ttings for such installation locations. If
you are in doubt, ask a specialist before installation.
Depending on the base wall material (e.g. concrete), suitable mounting materials must be used
(screws, dowels, etc.). The dowel screws enclosed are only suitable for solid walls. Special dow-
els and screws are not normally supplied with the TV wall holder and they have to be bought
separately, depending on the type and condition of the wall.
Due to the weight of the TV set and TV wall holder and the lever action involved, ensure that
screws are xed securely.
Plan the installation location carefully, so that the TV wall holder with the TV set xed to it will be
situated at the correct location (height and position) when you have nished.
Pay attention when drilling and tightening the screws that no cables or pipes in the wall are
damaged. Inadvertently drilling through electric cables causes the life-threatening danger of an
electric shock!
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Speaka 527506 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Speaka 527506 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info