810291
18
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
GB 18
5. SERVICE AND MAINTENANCE
CAUTION! Never clean your fireplace insert while it is hot or warm.
5.1 TYPE PLATE
The type plate can be found on your warranty certificate and on your fireplace
insert below the ash pan and/or the ash box. It includes technical data and
information. The type plate must not be removed as it confirms the testing of
the device and is required for the acceptance procedure and annual inspec-
tions by the chimney sweep.
5.2 ASH PAN AND GRATE
Clean and empty the grate and ash pan at regular intervals, adapted to
suit your use of the fireplace. CAUTION! Ash can keep embers hot for up
to 24 hrs.
The ash cone in the ash pan must not reach or block the slots in the grate.
Always have the engraved side of grate facing downwards, located in the
recess in the bottom of the fireplace insert.
5.3 WINDOW
The way to ensure that your window panel remains soot free for as long as
possible is
to use dry firewood (chapter „2.1.2 Types of wood“).
to control combustion through adjustments to the flow of combustion air
(chapter „3. Burning“).
to keep the fireplace insert at the highest possible combustion temperature
to have the correct amount of draught in the chimney
to add the right amount of wood for the operating range.
Gradual sooting up of the window is entirely normal and does not constitute
grounds for a complaint. Clean the inside of the window regularly using the
window cleaning agent provided to prevent particles of soot from burning in too
much (after approx. 8-12 operating hours)!
5.4 CLEANING AND MAINTENANCE
The fire area, the hot gas draught and the flue should be cleaned at regular
intervals. Specifically, whenever there is any extended interruption in opera-
tion of the fireplace, ensure that the chimney is not blocked.
For other conditions, refer to table:
What How often What with?
Outside of fireplace insert and
heating chamber
as required,
min. once a year
Brush, vacuum cleaner or
ash extractor
Glass pane based on fire
behaviour, for
optimum visibility, we
recommend after 8-12
hours of operation
You can easily clean the glass panel
with a commercially available cleaning
agent for fireplace glass.
Use dry cloth to wipe. No scouring.
Please do avoid that excess cleaning
agent enters between door frame and
glass panel. This might cause the
hardening of the sealing compound
between glass panel and door frame. A
hardened sealing compound might lead
to damages of door and glass.
Suitable cleaning agents for fireplace
glass are available at your specialist
dealer.
Decor finishes in
chrome or gold
as required Use dilute soapy lye and soft cloth. Do
not use abrasive agents. Do not polish!
Stainless steel surfaces as required Stainless steel cleaning product and a
soft cloth.
Painted surfaces as required Damp cloth without cleaning agent with
abrasive substances.
Hot air grille as required Duster or vacuum cleaner
Ash pan and grate as required Empty by hand or using special ash
extractor
Air space below ash pan as required Vacuum cleaner or ash extractor
Adapter between fireplace
insert and chimney
as required
min. once a year
Brush, ash extractor
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Spartherm Swing Tunnel bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Spartherm Swing Tunnel in de taal/talen: Engels als bijlage per email.

De handleiding is 1.24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Spartherm Swing Tunnel

Spartherm Swing Tunnel Gebruiksaanwijzing - Nederlands - 27 pagina's

Spartherm Swing Tunnel Gebruiksaanwijzing - Deutsch - 27 pagina's

Spartherm Swing Tunnel Gebruiksaanwijzing - Français - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info