779126
21
Verklein
Vergroot
Pagina terug
1/254
Pagina verder
English – 2
Technical data
On-board computer Kiox
Product code BUI330
Max. charging current of USB
portA) mA 1000
USB port charging voltage V 5
USB charging cableB) 1 270 016 360
Operating temperature °C −5to +40
Charging temperature °C 0to +40
Storage temperature °C +10to +40
Internal lithium-ion battery V
mAh 3.7
230
Protection ratingC) IPx7
Weight, approx. g 60
Bluetooth®Low Energy
– Frequency MHz 2400–2480
– Transmission power mW <10
A) At an ambient temperature of <25 °C
B) Not included as part of standard delivery
C) When the USB cover is closed
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the Kiox radio communication unit complies with Dir-
ective 2014/53/EU. The full text of the EU Declaration of
Conformity can be accessed at the following Internet ad-
dress: https://www.ebike-connect.com/conformity
Fitting
Fitting and removing the on-board computer
(see figureA)
Fit the lower part of the Kiox into the holder(5) first and tilt
it forward gently until you can feel that the on-board com-
puter is firmly fixed in the magnetic holder.
To remove the on-board computer, hold it by the top end
and pull it towards you until it disengages from the magnetic
holder.
uRemove the on-board computer when you park the
eBike.
The on-board computer can be secured in place to prevent it
from being removed from the holder. To do this, loosen the
headset screw(16) until the Kiox holder can be swivelled
sideways. Put the on-board computer in the holder. Screw
the locking screw (M3 thread, 6mm long) from below into
the thread provided in the on-board computer (using a
longer screw may damage the on-board computer). Swivel
the holder back into place and tighten the headset screw in
accordance with the manufacturer's specifications.
Operation
Before initial commissioning
The Kiox is supplied with a partially charged battery. Before
using it for the first time, this battery must be charged for at
least one hour via the USB port (see "Power supply of the on-
board computer", pageEnglish – 3) or via the eBike sys-
tem.
The control unit should be attached such that the buttons
are almost perpendicular to the handlebars.
When using the on-board computer for the first time, the lan-
guage selection page is displayed initially. You can then
choose to have essential functions and indications explained
via the <Intro to Kiox> menu item. The menu item can also
be called up at a later time via <Settings> <Informa-
tion>.
Selecting system settings
Fit the on-board computer in the holder and proceed as fol-
lows with the bicycle stationary:
Go to the status page (use the <button(10) on the control
unit to get to the first display) and call up the <Settings>
with the select button.
You can use the (11) and +(12) buttons to select the set-
ting you want. You can open the settings, as well as any addi-
tional submenus, using the select button(9). You can use
the <button(10) to go back to the previous menu from any
settings menu.
The following settings can be changed in the <Sys set-
tings>:
<Brightness>
<Time>
<Date [DD.Mon.YYYY]>
<Time zone>
<24h form (24h time format)>
<Brgh backg. (Bright background)>
<Imp. units (Imperial units)>
<Language>
<Factory reset>
Starting up the eBike system
Requirements
The eBike system can only be activated when the following
requirements are met:
A sufficiently charged eBike battery is inserted (see oper-
ating instructions for the battery).
The on-board computer is properly fitted to the holder.
Switching the eBike system on/off
The following options are available for switching on the
eBike system:
Once the on-board computer and the eBike battery are
fitted, briefly press the on/off button(4) on the on-board
computer.
1 270 020 XBK | (17.03.2020) Bosch eBike Systems
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sparta D-burst METb Smart Speedpedelec - 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sparta D-burst METb Smart Speedpedelec - 2021 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens, Zweeds als bijlage per email.

De handleiding is 15.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info