TURNING OFF THE ALARM
When the preset alarm time is reached, the AL1 (or AL2) INDICATOR will flash
on the LED DISPLAY and the beeper alarm or radio will sound for 30 minutes
unless interrupted by pressing SNOOZE. To stop the alarm immediately, tap the
corresponding AL1 (or AL2) button or POWER ON/OFF button. The alarm will
ring again at the same alarm time on the following day, or when set to go off
based on your Alarm settings.
SNOOZE FUNCTION
When the alarm source is sounding, press the SNOOZE button to suspend the
alarm and activate the snooze function. The Alarm will temporarily stop and
sound again 9 minutes later but the AL1 (or AL2) indicator will keep flashing.
Notes:
- This manual snooze operation can be repeated again and again.
- To turn off the snooze function before it ends, tap the corresponding AL1 (or
AL2) button or the ON –OFF / ALARM OFF button. The AL1 (or AL2)
INDICATOR will stop flashing.
SLEEP OPERATION
The sleep timer allows you to turn the unit off after a designated time has
elapsed.
1. While listening to the radio, tap the SLEEP button and sleep time ‘90’
(minutes) appears in the LED DISPLAY.
2. Repeatedly tap the SLEEP button to select a sleep timer of 90, 60, 30 or 15
minutes. Wait for about 10 seconds after your selection for the unit to confirm
the selection, the unit will play for the selected length of time then turn itself
‘Off’ automatically.
3. To cancel the sleep timer, repeatedly tap the SLEEP button until you see the
current time in the LED DISPLAY after last sleep timer option (15 minutes).
- This function can be cancelled with the button (1).
4. To turn the unit ‘Off’ before the selected sleep time, press and the on /off
button at any time.
Note:
There is no sleep indicator in this unit. To check the remaining sleep time, tap the
SLEEP button once.
NAP ALARM
The nap alarm can be used for e.g. a short “nap”. The function only operates in
standby.
Press the unit button (3) to select the time after which the device will beep.
Select from 90 to 10 minutes or OFF (off) in steps of 10 minutes.
After the selected time has elapsed, an increasingly fast beep will sound.
Use the unit button (1) to turn off the beep.
