674114
2
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
UR1001 / English Instruction Manual
2
AC-DC adaptor connection:
The clock radio unit can be powered by an external AC-DC adaptor, required the output DC 5V
500mA (included).
POWER CONNECTION
Plug the AC/DC Adaptor to a household outlet AC source, connect the adaptor’s DC output plug
to the DC-in jack of the clock unit. This unit is equipped with a battery back up system, it
requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -) battery terminals are
attached to the corresponding terminals on the plate in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power supply, the clock and timer
memory continue running. When the AC power resumes, the clock switches back to AC again.
GETTING STARTED
Press the reset button locates on the back of unit after AC plug in.
- The unit will display full segment for 2 seconds, then it will enter the normal mode.
Time setup
1. Plug the device into the mains.
2. Press and hold MEM/TIME button (7) , time format symbols will start flashing on the display:
12 hours (12Hr) or 24 hours (24Hr).
3. Use the << / TUNE – (8) and >> / TUNE + (9) button to select the time format.
4. Press the MEM/TIME button (7). The hour digits will start flashing on the display.
5. Use the << / TUNE – (8) and >> / TUNE + (9) button to select the necessary hour.
6. Press the MEM/TIME button (7). The minute digits will start flashing on the display.
7. Use the << / TUNE – (8) and >> / TUNE + (9) button to select the necessary minutes.
8. To finish the setup procedure press the MEM/TIME button (7).
Alarm setup
1. Plug the device into the mains.
2. To view the settings of the first alarm press the ALARM 1 button (5) .
3. In the mode of viewing the alarm settings, again press and hold the ALARM 1 button (5) .
The hour digits will start flashing on the display.
4. Use the << / TUNE – (8) and >> / TUNE + (9) button to select the necessary hour.
5. Press the ALARM 1 button (5) . The minute digits will start flashing on the display.
6. Use the < / TUNE – (8) and >> / TUNE + (9) button to select the necessary minutes.
7. Press the ALARM 1 button (5) . The alarm signal symbols will start flashing on the display.
Use the << / TUNE – (8) and >> / TUNE + (9) button to select the necessary alarm signal.
sounds of nature (NATURE), sound signal (BUZZER) or radio (RADIO).
8. If you have selected «sounds of nature» (NATURE) signal type, press the ALARM 1 button
(5) and using the buttons (8) and (9) to select the sound type: brook (BROOK), bubbles
(BUBBLE) or forest sounds (FOREST).
9. If you have selected «sounds of nature» (NATURE) or radio (RADIO) signal type, press the
ALARM 1 button (5). Digital parameters of the volume level shall appear on the display.
Using the < / TUNE – (8) and >> / TUNE + (9) button to select the alarm desired volume
level.
10. To finish the setting of the first alarm, press the ALARM 1 button (5).
11. Repeat steps 2-10 for the second alarm (ALARM 2) (6) .
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundmaster UR1001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundmaster UR1001 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Soundmaster UR1001

Soundmaster UR1001 Gebruiksaanwijzing - Deutsch - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info