ICD2200 / English Instruction Manual
4
GET THE NETWORK ENVIRONMENT READY
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security
password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and ICD2200. Check if the light indicators on the network device are in
appropriate status.
SETUP WIZARD
1. Language
Select the menu language
2. Private Policy
At the beginning of the first installation or after making a factory reset, the product privacy
policy will first appear on the display. To continue the installation, please confirm with the
"OK” button.
Further information are available under www.frontiersmart.com/privacy
3. Setup Wizard
Select “YES” to start the Setup Wizard.
4. Time/Date Display format
Select 12 or 24 as the time format.
5. Auto update
The time and date can be updated manually or automatically from DAB, FM or network.
Auto update works with data sent over DAB, FM or the Internet. The clock is only updated
when it is in a corresponding mode, so it is suggested to select a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a time
signal sent from the Internet radio portal when in any network connected mode.
6. Time zone/daylight
Set your time zone. If your country uses daylight saving and it is in effect, turn on the
Daylight saving option (only available when Auto update from Internet is selected).
7. Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date
and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the “ / ” knob. Once the
value is set, press the knob to continue setting with next value.
