611458
24
Verklein
Vergroot
Pagina terug
1/202
Pagina verder
4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
4.2 4.2: Hardware > DANTE / MADI Switching
4.2: Hardware > DANTE / MADI Sources
The Dante/MADI interface gives the Vi3000 a lot of exibility for recording shows, Virtual Soundchecking or interfacing
with third party MADI or Dante-enabled equipment such as signal routers or system processors.
The interface comprises an input (64ch) in each format and an output (64ch) in each format. The outputs are fed by a
common signal source which is available to any channel or bus via the Dante/MADI buttons within the Local tab of the
console’s output patching matrix. The patched signal is fed to both Dante and MADI outputs simultaneously.
The inputs are selectable using a global switch in the Menu-Settings page of the console to choose either the Dante or
the MADI port as the active input. Whichever of these is selected will appear in the Local tab of the input patch matrix
in the console and will be labelled Dante or MADI as appropriate. Only one input can be used at a time.
Recording
64ch recording/replay is possible via the MADI interface using a third-party MADI interface such as RME MADIface,
in most cases the recording software can be set to take its clock source from the console’s MADI stream. Alternatively
the console’s Wordclock Out can be used to drive the recording software or router, or the console can be slaved to the
other equipment’s clock via Wordclock In.
Alternatively, 64ch recording/replay can be achieved via the Dante port, by simply installing a copy of the Dante Vir-
tual Soundcard driver (DVS), available from the Audinate website. A free one-off license token is included with every
Vi3000 console -see the documentation packaged with the console. The license token number is used on the Audi-
nate website to enable the issuing of a license key code which is then entered into the DVS boot screen to unlock the
software. Dante Virtual Soundcard is available in PC and Mac formats and allows the the standard ethernet port on the
computer to become visible as a 64ch input/output low-latency audio interface from any audio recording or processing
software.
Interfacing to another Dante-enabled device or network
The Dante interface allows connection to any other Dante-enabled device, either directly or via a network switch,
and using either normal or redundant connections depending on how the primary and secondary Dante ports of each
device have been congured. Although the patching of signals to/from channels or busses in the console is done via
the console’s patch matrix, the routing of those 64 in and out signals within the Dante network has to be set up using
a free software application called Dante Controller, available from the Audinate website and running on either a PC or
Mac external computer. Using this software it’s possible to make connections on an individual channel basis between
the Vi3000’s 64ch Dante interface and all other Dante equipment on the network.
DANTE / MADI Interface and switching notes
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundcraft Vi 3000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundcraft Vi 3000 in de taal/talen: Engels als bijlage per email.

De handleiding is 17,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info