611453
203
Verklein
Vergroot
Pagina terug
1/221
Pagina verder
Soundcraft Vi1™ User Guide Issue 0810 Page 20 - 13
Shape & Spread
In the Hall reverbs, Shape and Spread work together to control the overall ambience of the reverberation.
Shape determines the contour of the reverberation envelope. With Shape all the way down, reverberation
builds explosively, and decays quickly. As Shape is advanced, reverberation builds up more slowly
and sustains for the time set by Spread. With Shape in the middle, the build-up and sustain of the
reverberation envelope emulates a large concert hall (assuming that Spread is at least halfway up, and
that Size is 30 meters or larger). Low Spread settings result in a rapid onset of reverberation at the
beginning of the envelope, with little or no sustain. Higher settings spread out both the buildup and
sustain.
RT High Cut
Rt HC sets the frequency above which a 6dB/octave low-pass lter attenuates the reverberated signal. It
does not attenuate the reections. High frequencies are often rolled off with this parameter, resulting in
more natural-sounding reverberation. Setting a low frequency for this parameter can actually shorten the
reverb time, as it damps the audio as it recirculates.
Hi Cut
Adjusts the amount of high frequency content in the reverberation tails. Higher frequency settings increase
high frequency response, creating brighter reverbs; lower frequency settings create darker reverbs with
more bass frequency emphasis.
Bass Boost Frequency
Sets the frequency at which the transition from Mid Rt to Low Rt takes place. This control should be set at
least two octaves higher than the low frequency you want to boost.
For example, to boost a signal at 100Hz, set Bass Boost Frequency to 400Hz. (This setting works well for
classical music.) Crossover works best around 400Hz for boosting low frequencies, and around 1.5 kHz for
cutting low frequencies.
Bass Boost Ratio
Bass Boost boosts or cuts frequencies below Bass Boost Frequency. The amount of boost or cut required
is highly dependent on the material being processed.
ER Time
Adjusts the amount of time before reverb early reections occur.
ER Level
Adjusts the level of early reections within the reverb.
Feedback Delay
Changing this parameter changes the resonant frequencies of Plate reverb.
Feedback Level
Adjusts the Plate reverb’s presence and prominence.
Boing
This is a unique parameter to the Spring reverb, designed to increase or decrease the amount of spring
rattle that is a physical characteristic of spring tank reverbs.
203

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundcraft Vi 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundcraft Vi 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info