812402
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Room Sensor Smart / Room Sensor Clima Smart
Digital room temperature / room temperature and humidity sensor with communication via WiFi in combination with °CALEON Smart (Art. 70003e) or
°CALEON Clima Smart (Art. 70004e).
Technical Data
Power Supply 230VAC
measurement range 0 °C ... 60 °C / 0% ... 100%
Accuracy: +/- 1 °C / +/- 6 %
Resolution: 0,1 °C / 0,1 %
Protection Class IP20
Dimension 80 mm x 80 mm
Housing Design white plastic housing pure white
Installation Methods flush-mounted switch box
Wall mounting and electrical connection
Mount the sensor in a suitable location.
Pay attention to suitable environmental conditions. Direct sunlight, sources of heat and cold, e.g. radi-
ators and windows must be avoided.
Mounting on Pastic Wall Socket
Using the enclosed screws (3.0 x 16) fix the mounting frame (2) to the switch box. Make the electrical connection as
described below.
Electrical connection
Connect the sensor to 230VAC power supply.
L= brown, N= blue
Insert the Element
Hold the cover frame (1) to the mounting frame (2). Align the 55 mm element (3) to fit the mounting frame and
press in the 55 mm element until it engages in the frame.
Type plate and sticker with MAC address
Each sensor has a unique MAC address. This address is required for sensor-room assignment in the
°CALEON Smart. The MAC address can be found inside the sensor on the supplied sticker.
Commissioning
The sensor is connected to the °CALEON Smart / °CALEON Clima Smart via an individual WPS (WiFi Protected Setup). The integration of a Room Sensor
Smart is part of the guided commissioning wizard. The important steps for integration are:
Confirm with "Yes" to start the
WPS integration.
"Initialise WPS..." signals that
pairing can be started.
Start pairing by placing a fin-
ger on the touch area. LED
lights up white.
Press and hold the touch area
until the LED lights up blue.
The sensor confirms suc-
cessful pairing with a green
LED.
SOREL GmbH Mikroelektronik | Reme-Str. 12 | D - 58300 Wetter (Ruhr) | +49 (0)2335 682 77 0 | +49 (0)2335 682 77 10 | info@sorel.de | www.sorel.de
1
After successful pairing, the
sensor is displayed with
sensor type, MAC address
and measured values.
Repeat the procedure for
other sensors.
In the further course of com-
missioning, the Room
Sensors Smart are assigned
to the rooms.
Select the Room Sensor
Smart as the temperature
sensor. The sensor can be
identified by the MAC address
shown on the display/ type
plate.
If a Room Sensor Clima
Smart with relative humidity
sensor is used, select the
sensor as the humidity sensor
for the room.
Beyond the commissioning wizard, the integration can be carried out via the menu:
Expert -> Settings -> Devices -> Add Devices.
Load factory setting / remove sensor from network
To unpair a Room Sensor Smart with a °CALEON Smart or to reset the sensor to factory settings:
1. Briefly place your finger on the top right of the touch area until the LED lights up white.
2. Place your finger briefly on the top right of the touch area a second time until the LED lights up white.
3. Place your finger on the top right of the touch area for a long time. After 10 seconds, the LED flashes red. Continue to hold down until the LED lights
up permanently red.
4. Then at the °CALEON in the menu:
Expert > Settings > Devices > WiFi Sensor > Remove to exclude the sensor.
1. briefly lights up white 2. briefly lights up white 3. flashes red 4. lights up red
LED states
LED lights up white Touch registered
LED flashes red quickly Warning, sensor is reset to factory settings
LED lights up red Sensor successfully excluded / reset to factory settings
LED flashes 3x red Transmission failed
LED lights up green Transmission OK
LED lights up blue Pairing active (devices are connected)
SOREL GmbH Mikroelektronik | Reme-Str. 12 | D - 58300 Wetter (Ruhr) | +49 (0)2335 682 77 0 | +49 (0)2335 682 77 10 | info@sorel.de | www.sorel.de
2
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sorel Room Sensor Smart bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sorel Room Sensor Smart in de taal/talen: Engels als bijlage per email.

De handleiding is 0.68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sorel Room Sensor Smart

Sorel Room Sensor Smart Gebruiksaanwijzing - Deutsch - 2 pagina's

Sorel Room Sensor Smart Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info