812334
24
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Room Controller
Room Controller
This value is used to appoint the amount of influence the room temperature has on the reference flow temperature, as a percentage. For
each degree deviation between room temperature and set point temperature, the percentage set here is added from the calculated set
flow temperature to the set flow temperature or subtracted from it until the min. or max flow values.
Example: Reference room temp.: e.g. 25 °C; room temp.: e.g. 20 °C ±5 °C. Calculated reference temp.: e.g. 40 °C: room controller: 10
%= 4 °C 5 X 4 °C= 20 °C. Accordingly, 20 °C are added to the reference flow temperature, giving 60 °C. If the value is higher than the
one set in max. flow temp, the resulting temperature is the one set in max. flow temp.
Room Reference Day
The desired room temperature for day mode.
In combination with the %-value set under "room controller", the difference between reference and actual room temperature influences
the reference flow temperature. If the room controller is set to 0 %, this function is deactivated.
For °CALEON room controller without influence.
Room Reference Night
The desired room temperature for night mode.
In combination with the %-value set under "room controller", the difference between reference and actual room temperature influences
the reference flow temperature. If the room controller is set to 0 %, this function is deactivated.
For °CALEON room controller without influence.
In the mode Set point program, the room controller has no influence.
Thermostat (X)
The room controller or sensor input is selected here.
When using a °CALEON: select the room set in the °CALEON.
When using an RC21: select RC21-local 1
When using an RC20 or other thermostats and seasonal switches: select the sensor input used here and then select the exact function
under "sensor type".
Eco Display Mode
In Eco Display Mode the backlight of the display is switched off if no buttons are pushed for 2 minutes.
If a message exists, the backlight does not switch off until the message has been scanned by the user.
Network
If necessary, the network settings of the connected data logger must be set.
Access Control
This menu lets you give up to 4 users access to the data logger. The users that are registered then have access to the controller or
respectively the data logger.
To add a user in the list, select <add user>. Leave the now visible menu open und connect to the address of the connector or respect-
ively the data logger. Your user name is going to appear in this menu and can be selected and confirmed with ‘OK’.
Note
24
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sorel MHCC 24V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sorel MHCC 24V in de taal/talen: Engels als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sorel MHCC 24V

Sorel MHCC 24V Gebruiksaanwijzing - Deutsch - 30 pagina's

Sorel MHCC 24V Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info