144187
49
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
Printed in Slovak Republic
4-149-085-12(1)
U
For useful information about Sony products
Instructions about “Installing Wall Mount Bracket” are included within
this TV’s instructions manual
© 2009 Sony Corporation 4-149-085-12(1)
U
LCD Digital Colour TV
Operating Instructions
KDL-22E53xx
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\02WAR.fm
masterpage:Left
2
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
NOTICE FOR
CUSTOMERS IN
THE UNITED
KINGDOM
A moulded plug complying with BS1363
is fitted to this equipment for your safety
and convenience.
Should the fuse in the plug supplied need
to be replaced, a 10 AMP fuse approved by
ASTA or BSI to BS 1362 (i.e., marked
with or ) must be used.
When an alternative type of plug is used it
should be fitted with a 10 AMP FUSE
otherwise the circuit should be protected
by a 10 AMP FUSE at the distribution
board.
If the plug supplied with this equipment
has a detachable fuse cover, be sure to
attach the fuse cover after you change the
fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover,
please contact your nearest Sony service
station.
How to replace the fuse
Open the fuse compartment with a blade
screwdriver, and replace the fuse.
Please refer to the illustration that actually
equipped with the product.
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
Notes on Digital TV
function
Any functions related to Digital TV
( ) will only work in countries or
areas where DVB-T (MPEG-2 and
H.264/MPEG-4 AVC) digital terrestrial
signals are broadcast or where you have
access to a compatible DVB-C (MPEG-
2 and H.264/MPEG-4 AVC) cable
service. Please confirm with your local
dealer if you can receive a DVB-T signal
where you live or ask your cable
provider if their DVB-C cable service is
suitable for integrated operation with this
TV.
Your cable provider may charge a fee for
their services, or require you to agree to
its terms and conditions of business.
This TV set complies with DVB-T and
DVB-C specifications, but compatibility
with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts are not
guaranteed.
Some Digital TV functions may not be
available in some countries/areas and
DVB-C cable may not operate correctly
with some providers.
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
The "x" that appear on the model name,
correspond to numeric digits related to
colour variation.
Trademark information
is a registered trademark of the DVB
Project.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
DLNA and DLNA CERTIFIED are
trademarks and/or service marks of Digital
Living Network Alliance.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“BRAVIA” and are
trademarks of Sony Corporation.
“XMB™” and “XrossMediaBar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
Germany. For any service or
guarantee matters please refer to the
addresses given in separate service
or guarantee documents.
FUSE
FUSE
3
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\010COVTOC.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Table of Contents
Start-up Guide 4
Safety Information............................................................................................................................ 7
Precautions....................................................................................................................................... 8
Remote and TV Controls/Indicators ...............................................................................................9
Watching TV
Watching TV.................................................................................................................................... 14
Using the Digital Electronic Programme Guide (EPG) ............................................................... 16
Using the Favourite List ................................................................................................................ 17
Using Optional Equipment
Connecting Optional Equipment ..................................................................................................18
Viewing Pictures from Connected Equipment............................................................................. 20
Playing back Photo/Music/Video via USB.................................................................................... 21
Using BRAVIA Sync with Control for HDMI ................................................................................. 23
Using Home Network Features
Connecting to the Network............................................................................................................ 24
Enjoying AppliCast......................................................................................................................... 25
Enjoying Photo/Music/Video Files via the Network .................................................................... 26
Checking the Network Connection ............................................................................................... 27
Adjusting the Server Display Settings ......................................................................................... 27
Using Menu Functions
Navigating through TV Home Menu on XMB™............................................................................ 28
TV Settings Menu ........................................................................................................................... 29
Additional Information
Installing the Accessories (Wall-Mount Bracket) ........................................................................ 41
Specifications ................................................................................................................................. 43
Troubleshooting ............................................................................................................................. 45
Index ................................................................................................................................................ 51
Before operating the TV, please read “Safety Information” (page 7). Retain this manual for future reference.
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\030STU.fm
masterpage:Left
4
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Start-up Guide
Before Use
To check the accessories
RM-ED016W Remote (1)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
1: Connecting an aerial/Set
Top Box/recorder (e.g. DVD
recorder)
Connecting a Set Top Box/recorder (e.g.
DVD recorder) with SCART
Connecting a Set Top Box/recorder (e.g.
DVD recorder) with HDMI
Push and lift the cover to open.
Set Top Box/recorder (e.g. DVD recorder)
Set Top Box/recorder (e.g. DVD recorder)
5
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\030STU.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Start-up Guide
2: Preventing the TV from
toppling over
For additional stability, the hole on the back of
the TV can be used to secure the TV to a wall.
1 Unplug the TV.
2 Run the suitable cable (not supplied)
through the hole on the back of the TV.
3 Anchor the Cable to a stable surface such
as a wall or pillar.
3: Bundling the cables
~
Do not bundle the mains lead/AC power cord
together with other cables.
4: Performing the initial
Set-up
Cable (not supplied)
Tighten the
cable
1 Connect the TV to your mains socket.
2 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
3
Follow the instructions on the screen.
(Continued)
Wall anchor bracket
(not supplied)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\030STU.fm
masterpage:Left
6
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Detaching the Table-Top
Stand from the TV
~
Remove the screws guided by the arrow marks
of the TV.
Do not remove the Table-Top Stand for any
reason other than to wall-mount the TV.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your
cable provider. If no channel is found
using “Quick Scan”, try “Full Scan”
(though it may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
You can also tune channels manually
(page 37).
Programme Sorting: If you want to
change the order of analogue channels,
follow the steps in “Programme Sorting”
(page 36).
Eco Preset: When you select “Yes”, the
“Eco” settings are changed into
recommended values to reduce power
consumption.
7
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\040SAF.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Safety
Information
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installation
The TV set should be installed near an
easily accessible mains socket.
Place the TV set on a stable, level
surface.
Only qualified service personnel should
carry out wall installations.
For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
Wall-mount bracket SU-WL100
Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
Transporting
Before
transporting the
TV set, disconnect
all cables.
Two or three
people are needed
to transport a large
TV set.
When
transporting the
TV set by hand,
hold it as shown
on the right. Do
not put stress on
the LCD panel.
When lifting or
moving the TV
set, hold it firmly
from the bottom.
When transporting the TV set, do not
subject it to jolts or excessive vibration.
When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
Ventilation
Never cover the ventilation holes or
insert anything in the cabinet.
Leave space around the TV set as shown
below.
It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent
the collection of dirt or dust:
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
Do not install the TV set as shown
below.
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220–240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
Keep the mains lead away from heat
sources.
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Notes
Do not use the supplied mains lead on
any other equipment.
Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains
lead.
Do not pull on the mains lead itself when
disconnecting the mains lead.
Do not connect too many appliances to
the same mains socket.
Do not use a poor fitting mains socket.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Environment:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the TV.
Situation:
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Broken pieces:
Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
If the surface of the TV set cracks, do not
touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
When not in use
If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
For children
Do not allow children to climb on the TV
set.
Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
Mounting Hook
Hook attachment on rear
of TV set
Screw (supplied with the
Wall-mount bracket)
8 mm - 12 mm
30 cm
10 cm 10 cm
10 cm
Leave at least this space around
the set.
30 cm
10 cm
10 cm
6 cm
Leave at least this space around
the set.
Air circulation is blocked.
Wall Wall
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\040SAF.fm
masterpage:Left
8
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
When:
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
Any liquid or solid object falls through
openings in the cabinet.
Precautions
Viewing the TV
View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
LCD Screen
Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
The LCD screen contains a small amount
of liquid crystal. Some fluorescent tubes
used in this TV set also contain mercury.
Follow your local ordinances and
regulations for disposal.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead connected
to the TV set from mains socket before
cleaning.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
Optional Equipment
Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
This product has been tested and found
to compliant with the limits set out in the
EMC Directive for using connection
cables not longer than 3 meters (9.8 feet).
Batteries
Observe the correct polarity when
inserting batteries.
Do not use different types of batteries
together or mix old and new batteries.
Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
Disposal of the TV set
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Disposal of
waste batteries
(applicable in the
European Union
and other
European
countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead. By
ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the
environment and human health which
could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the
applicable collection point for the
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
9
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\050OVR.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Remote and TV Controls/Indicators
Remote and TV controls
Buttons on the TV will work the same as those on the remote.
* In the TV menu, these buttons will work as F/f/G/g/.
z
•The number 5, N, PROG + and AUDIO buttons on the remote
have a tactile dot. Use the tactile dots as a reference when operating
the TV.
Button/Switch Description
1 "/1 (TV
standby)
Press to turn the TV on and off from standby
mode.
2 1 (Power) Press to turn the TV on or off.
~
• To turn the TV completely off (0 W, no
power consumption), turn off the TV, then
unplug the mains lead/AC power cord from
the mains/AC power.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\050OVR.fm
masterpage:Left
10
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
3 SCENE Press to display the “Scene Select” menu.
When you select the desired scene option, the
optimum sound quality and picture quality for
the selected scene are automatically set.
Press F/f/G/g to select the scene option, then
press .
Cinema: Delivers picture scenes just like those
in a theatre-like atmosphere with dynamic
sound.
Photo: Delivers picture scenes that
authentically reproduces the texture and colour
of a printed photo.
Sports: Delivers picture scenes that let you
experience realistic picture and sound like those
in a stadium.
Music: Delivers sound effects that let you
experience dynamic and clear sound like that at
a concert.
Game: Delivers picture scenes that let you
enjoy your game-playing experience to the
fullest with superb picture and sound quality.
Graphics: Delivers picture scenes that ease
your prolonged monitor viewing experience and
reduce fatigue by displaying clearer detailed
pictures.
General: Current user settings.
Auto: The optimum sound quality and picture
quality are automatically set according to the
input source, though there may not be any effect
depending on the connected devices.
~
In Digital mode, "Scene" options are applied
independently for HD (High-definition) and
SD (Standard-definition) pictures.
When you set Theatre Mode (page 12) to on,
the “Scene Select” setting switches to
“Cinema” automatically.
4 AUDIO In analogue mode: Press to change the dual
sound mode (page 32).
In digital mode: Press to change the language
to be used for the programme currently being
viewed (page 38).
5 / (Info/
Text reveal)
Each time you press the button, the display
changes as follows:
In digital mode: Details of the current
programme
t Details of the next programme
(only for Sony Guide)
In analogue mode: Current channel number
and screen mode
t Clock information
In Text mode: Reveals hidden information
(e.g. answers to a quiz) (page 15).
11
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\050OVR.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
6
F/f/G/g/ Press F/f/G/g to move the on-screen cursor.
Press to select/confirm the highlighted item.
When playing a photo file: Press to pause/
start a slideshow. Press F/G to select the
previous file. Press f/g to select the next file.
When playing a music/video file: Press to
pause/start the playback. Press and hold G/g to
fast forward/fast reverse, then release the
button at the point where you want to resume
playback. Press F to start playback from the
beginning of the current file. Press f to go to
the next file.
7 OPTIONS Press to display a list that contains “Device
Control” or shortcuts to some setting menus.
Use the “Device Control” menu to operate
equipment that is compatible with Control for
HDMI.
The listed options vary depending on the input
source.
8 HOME Press to display the TV Home Menu (page 28).
9 Coloured
buttons
When the coloured buttons are available, an
operation guide appears on the screen.
q; Number
buttons
In TV mode: Press to select channels. For
channel numbers 10 and above, press the next
digit quickly.
In Text mode: Press to enter a page number.
qa
(Favourite)
Press to display the Favourite List that you
have specified (page 17).
qs PROG +/–/
/
In TV mode: Press to select the next (+) or
previous (–) channel.
In Text mode: Press to select the next ( ) or
previous ( ) page.
qd (Subtitle
setting)
Press to change the subtitle language (page 38)
(in digital mode only).
qf % (Mute) Press to mute the sound. Press again to restore
the sound.
z
In standby mode, if you want to turn on the
TV without sound, press this button.
qg 2 +/–
(Volume)
Press to adjust the volume.
qh / (Text) Press to display text information (page 15).
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\050OVR.fm
masterpage:Left
12
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
qj RETURN Press to return to the previous screen of the
displayed menu.
When playing a photo/music/video file: Press
to stop the playback. (The display returns to the
file or folder list.)
qk GUIDE
(EPG)
Press to display the Digital Electronic
Programme Guide (EPG) (page 16).
ql DIGITAL Press to display the digital channel that was
last viewed.
When viewing pictures from connected
equipment: Press to return to normal TV mode.
w; ANALOG Press to display the analogue channel that was
last viewed.
When viewing pictures from connected
equipment: Press to return to normal TV mode.
wa BRAVIA
Sync
m/N/X/M/x: You can operate the
BRAVIA Sync-compatible equipment that is
connected to the TV.
SYNC MENU: Displays the menu of
connected HDMI equipment. While viewing
other input screens or TV programmes,
“HDMI Device Selection” is displayed when
the button is pressed.
THEATRE: You can set Theatre Mode to on
or off. When Theatre Mode is set to on, the
optimum sound quality (if the TV is connected
with an audio system using an HDMI cable)
and picture quality for film-based contents are
automatically set.
~
• If you turn the TV off, Theatre Mode is also
turned off.
When you change the “Scene Select” setting,
Theatre Mode turns off automatically.
“Control for HDMI” (BRAVIA Sync) is only
available with the connected Sony equipment
that has the BRAVIA Sync or BRAVIA
Theatre Sync logo or is compatible with
Control for HDMI.
ws / (Input
select/Text
hold)
In TV mode: Press to display a list of inputs.
In Text mode: Press to hold the current page.
wd (Screen
mode)
Press to change the screen format (page 15).
13
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\050OVR.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Operation Guide
Example: Press or
RETURN (see 6 (page 11) or qj (page 12)).
The operation guide provides help on how to operate the TV using the remote, and is displayed at
the bottom of the screen. Use the remote buttons shown on the operation guide.
Indicators
Indicator Description
1 Light sensor Do not put anything over the sensor, doing so may affect its function (page 29).
2 Remote control
sensor
Receives signals from the remote.
Do not put anything over the sensor. The sensor may not work properly.
3 (Picture Off /
Timer)
Lights up in green when you select “Picture Off” (page 29).
Lights up in orange when you set the timer (page 16, 29).
4 1 (Standby) Lights up in red when the TV is in standby mode.
5 " (Power) Lights up in green when the TV is on.
About the operation guide on the TV screen
,
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\060WAT.fm
masterpage:Left
14
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Watching TV
Watching TV
1 Press 1 on the TV to turn on the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV front panel
is red), press "/1 on the remote to turn on
the TV.
2 Press DIGITAL to switch to digital mode,
or press ANALOG to switch to analogue
mode.
The available channels vary depending on
the mode.
3 Press the number buttons or PROG +/– to
select a TV channel.
To select a digital programme using the
Digital Electronic Programme Guide
(EPG)
(page 16).
In digital mode
An information banner appears briefly.
The following icons may be indicated on
the banner.
: Interactive service is available
(MHEG Digital Text)
: Interactive service (MHEG Digital
Text) is currently disabled
:Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing
impaired
: Recommended minimum age for
current programme (ages from 4 to
18)
: Parental lock
To access Digital Text
Many broadcasters provide a Digital Text
service. Digital Text offers graphically rich
contents, compared to Analogue Text.
Select a digital channel which provides Digital
Text, then press /.
When a broadcaster provides a dedicated
Digital Text channel, select this channel to
access Digital Text.
To navigate through Digital Text, follow the
instructions on the screen.
To exit Digital Text, press RETURN.
To move around, press F/f/G/g.
To select items, press and the number
buttons.
To access shortcuts, press the coloured
buttons.
2
3
3
15
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\060WAT.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Watching TV
To access Analogue Text
In analogue mode, press /. Each time you
press /, the display changes cyclically as
follows:
Text and TV picture t Text t No Text (exit
the Text service)
To select a page, press the number buttons or
/.
To hold a page, press .
To reveal hidden information, press .
z
You can also jump directly to a page by selecting
the page number displayed on the screen. Press
and F/f/G/g to select the page number, then press
.
When four coloured items appear at the bottom of
the Text page, you can access pages quickly and
easily (FasText). Press the corresponding coloured
button to access the page.
To change the Screen Format manually
Press repeatedly to select the desired
Screen Format.
* Parts of the top and bottom of the picture may be cut off.
You can adjust the vertical position of the picture. Press
F/f to move the picture up or down (e.g. to read
subtitles).
~
When you select “Smart”, some characters and/or
letters at the top and the bottom of the picture may
not be visible. In such a case, adjust “Vertical
Size” in the “Screen” menu (page 33).
z
When “Auto Format” (page 33) is set to “On”, the
TV automatically selects the best mode to suit the
broadcast.
If 720p, 1080i or 1080p source pictures are
displayed with black borders on the screen edges,
select “Smart” or “Zoom” to adjust the pictures.
Smart*
Enlarges the centre
portion of the picture.
The left and right edges
of the picture are
stretched to fill the 16:9
screen.
4:3
Displays the 4:3 picture
in its original size. Side
bars are shown to fill
the 16:9 screen.
Wide
Stretches the 4:3
picture horizontally, to
fill the 16:9 screen.
Zoom*
Displays the
cinemascopic (letter
box format) picture in
the correct proportion.
14:9*
Displays the 14:9
picture in the correct
proportion. As a result,
side bars are shown on
the screen.
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\060WAT.fm
masterpage:Left
16
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using the Digital Electronic Programme Guide (EPG)
1 In digital mode, press GUIDE.
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
This function may not be available in some countries/regions.
To Do this
View a programme Press F/f/G/g to select a programme, then press .
Turn off the EPG Press GUIDE.
Sort programme information by
category
– Category list
1 Press the blue button.
2 Press F/f to select a category, then press .
Category name (e.g. “News”) contains all channels
corresponding to the selected category.
Set a programme to be displayed
automatically on the screen when it
starts
– Reminder
1 Press F/f/G/g to select a future programme you want to
display, then press .
2 Press F/f to select “Reminder”, then press .
A c symbol appears next to the programme’s information. The
indicator on the TV front panel lights up in orange.
~
• If you switch the TV to standby mode, the TV will automatically
turn on when the programme starts.
Cancel a reminder
– Cancel Timer
1 Press .
2 Press F/f to select “Timer list”, then press .
3 Press F/f to select the programme you want to cancel, then
press .
4 Press F/f to select “Cancel Timer”, then press .
A display appears to confirm that you want to cancel the
programme.
5 Press G/g to select “Yes”, then press .
17
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\060WAT.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Watching TV
Using the Favourite List
Analogue Favourites
The Favourite feature lets you select
programmes from a list of up to 16 favourite
channels that you specify.
1 In analogue mode, press .
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
Digital Favourites
You can specify up to four of your favourite
channel lists.
1 In digital mode, press .
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
Analogue Favourite List
To Do this
Watch a channel Press .
Turn off the Favourite list Press .
Add a current channel to the
Favourite list
Press F/f to select “Add to Favourites”, then press .
Remove a channel from the Favourite
list
1 Press F/f to select “Edit Favourites”, then press .
The “Favourite Set-up” screen appears.
2 Press F/f to select the channel number, then press .
3 Press F/f to select “– –”, then press .
Digital Favourite List
To Do this
Turn off the Favourite list Press RETURN.
Add or remove channels in a
Favourite list
1 Press the blue button.
Go to step 2 when you add channels for the first time or the
Favourite list is empty.
2 Press the yellow button to select the Favourite list to edit.
3 Press F/f/G/g to select the channel to add or remove, then press
.
Watch a channel
1 Press the yellow button to select a Favourite list.
2 Press F/f to select a channel, then press .
Remove all channels from a
Favourite list
1 Press the blue button.
2 Press the yellow button to select the Favourite list to edit.
3 Press the blue button.
4 Press G/g to select “Yes”, then press .
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
18
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Optional Equipment
Connecting Optional Equipment
You can connect a wide range of optional equipment to your TV.
Connecting audio-video equipment (quality order, high to low)
Connect to Connect with Description
5, 9, qa
HDMI IN 1, 2, 3,
or 4
HDMI cable Digital video and audio signals are input from the connected
equipment.
In addition, when you connect the equipment that is
compatible with Control for HDMI, communication with the
connected equipment is supported (page 35).
If the equipment has a DVI socket/jack, connect the DVI
socket/jack to the HDMI IN 1 socket/jack through a DVI -
HDMI adaptor interface (not supplied), and connect the
equipment’s audio out sockets/jacks to the audio in sockets/
jacks in the HDMI IN 1 sockets/jacks.
~
• Be sure to use only an authorized HDMI cable bearing the
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
• When connecting an audio system that is compatible with
Control for HDMI, be sure to also connect it to the
DIGITAL AUDIO OUT (OPTICAL) socket/jack.
qs
qd
0
qa
8
9
7
12 3 5
4
6
19
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Optional Equipment
3 /
COMPONENT IN
Component video
cable, audio cable
2 /AV1,
// AV2
SCART cable When you connect an analogue decoder, the TV tuner outputs
scrambled signals to the decoder, and the decoder
unscrambles the signals before outputting them.
qs AV3, and
AV3
Composite video
cable
When connecting a mono equipment, connect to the AV3
L socket.
Connecting audio/portable equipment
Connect to Connect with Description
1 Audio cable You can listen to TV sound on the connected Hi-Fi audio
equipment.
4 DIGITAL
AUDIO OUT
(OPTICAL)
Optical audio
cable
You can listen to TV sound on the connected Home theatre
system with digital input.
8 USB USB cable You can enjoy photo/music/video files stored in a Sony
digital still camera or camcorder (page 21).
Connecting other equipment
Connect to Connect with Description
6 / PC IN PC cable with
ferrites, audio
cable
It is recommended to use a PC cable with ferrites, such as the
“Connector, D-sub 15” (ref. 1-793-504-11, available in Sony
Service Centre), or an equivalent.
7 LAN LAN cable You can enjoy contents stored in DLNA-compatible devices
via a network (page 24).
0 CAM
(Conditional
Access Module)
Provides access to pay TV services. For details, refer to the
instruction manual supplied with your CAM.
To use the CAM, remove the “dummy” card from the CAM
slot, then turn off the TV and insert your CAM card into the
slot. When you are not using the CAM, we recommend that
you keep the “dummy” card in the CAM slot.
z
Do not insert the smart card directly into the TV CAM
(Conditional Access Module) slot. It must be fitted into the
Conditional Access Module provided by your authorised
dealer.
~
• CAM is not supported in some countries/areas. Check with
your authorised dealer.
qd i Headphones You can listen to TV sound through headphones.
Connect to Connect with Description
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
20
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Viewing Pictures from
Connected Equipment
Turn on the connected equipment, then
perform the following operation.
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
For an auto-tuned VCR
In analogue mode, press PROG +/– or the
number buttons, to select the video channel.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
~
This function is not available for a PC input.
1 Press OPTIONS.
2 Press F/f to select “PIP/ PAP”, then press
.
3 Press F/f to select “PAP”, then press .
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
4 Press the number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press RETURN.
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
1 Press OPTIONS.
2 Press F/f to select “PIP/ PAP”, then press
.
3 Press F/f to select “PIP”, then press .
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use F/f to change the position of
the TV programme screen.
4 Press the number buttons or PROG +/– to
select a TV channel.
To return to single picture mode
Press RETURN.
z
You can switch the audible picture by pressing G/
g.
1 Press .
2 Press F/f to select
the desired input
source, then press .
21
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Optional Equipment
Playing back Photo/Music/
Video via USB
You can enjoy photo/music/video files stored
in a Sony digital still camera or camcorder
through a USB cable or USB storage device on
your TV.
1 Connect a supported USB device to the
TV.
2 Press HOME.
3 Press G/g to select “Photo”, “Music”, or
“Video”.
4 Press F/f to select a USB device, then
press .
The file or folder list appears.
To display a thumbnail list, press the
yellow button while the list is displayed.
5 Press F/f to select a file or folder, then
press .
When you select a folder, select a file,
then press .
Playback starts.
Photo Playback Auto Start
The TV automatically starts photo playback
when the TV is turned on and a digital still
camera or other device storing photo files is
connected to the USB port then turned on
(page 34).
~
While the TV is accessing the data on the USB
device, observe the following:
– Do not turn off the TV or connected USB
device.
Do not disconnect the USB cable.
Do not remove the USB device.
The data on the USB device may be damaged.
Sony will not be held liable for any damage to, or
loss of, data on the recording media due to a
malfunction of any connected devices or the TV.
Playback does not start automatically if the TV is
turned on after connecting the digital still camera
or other device to the USB port.
You can register the background music to be
played during a slideshow using Photo by
pressing OPTIONS, then select “Add to
Slideshow” while playing back music.
USB playback is supported for the following
photo file formats:
JPEG (JPEG format files with the extension
“.jpg” and conforming to DCF 2.0 or Exif 2.21)
RAW (ARW/ARW 2.0 format files with the
extension “.arw”. For preview only.)
USB playback is supported for the following
music file format:
MP3 (files with the extension “.mp3” that have
not been copyrighted)
USB playback is supported for the following
video file format:
MPEG1 (files with the extension “.mpg”)
Photo Playback Auto Start works only for photo
files in the newest digital still camera folder
(DCF-compliant, highest-numbered “DCIM”
folder).
Playback may not start automatically when some
digital still cameras (such as cameras with internal
memory) are connected.
The file name and folder name support only
English.
When you connect a Sony digital still camera, set
the camera’s USB connection mode to Auto or
“Mass Storage”. For more information about USB
connection mode, refer to the instructions supplied
with your digital camera.
Check the website below for updated information
about compatible USB devices.
http://support.sony-europe.com/TV/compatibility/
Use a USB storage device that is compliant with
USB Mass Storage Class standards.
To display a photograph
— Picture Frame
You can display a photograph on the screen
for a selected period of time. After that period,
the TV automatically switches itself into
standby mode.
1 Select a photograph.
You can select a photograph from the
connected USB device or preset picture
folder. For details on selecting a
photograph (page 21).
2 Press OPTIONS while the selected
photograph is displayed, then press F/f to
select “Picture Frame Image” and press
.
3 Press RETURN repeatedly to return
to the Home Menu.
4 Press G/g to select “Photo”, then select
“Picture Frame” and press .
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
22
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
The TV is switched to Picture Frame
mode, and the selected photograph is
displayed on the screen.
To set the duration of displaying a
photograph
Press OPTIONS, then select “Duration”
and press . Then, select the duration,
and press .
The counter appears on the screen.
To return to the XMB™
Press RETURN.
~
If the photograph is selected from a USB device, it
must remain connected to the TV.
If “Sleep Timer” is activated, the TV
automatically will switch into standby mode.
To display a photograph with the
location on the map
When using a digital still camera with GPS
function, it is possible to display a photograph
with a map of the location where the
photograph was taken using a function of GPS
for recording longitude and latitude. Because
map information is downloaded from the
Internet online map service, the network
connection must be required and the TV has to
be connected to the network (page 24).
1 Select a photograph (page 21).
2 Press the green/red buttons to zoom in/out
on the map.
To change the display position of the map
on the TV screen, press the blue button
repeatedly.
~
Because the Internet online map service is
provided by a third party, service may be changed
or terminated without prior notification to the
user.
The position indicated on the map may differ
depending on the digital still camera.
Only a large-scale map that cannot be zoomed in
or out is displayed if the TV is not connected to
the Internet or the Internet online map service is
terminated.
z
A map can be displayed in the case of
photograph’s Exif data includes a date
information, and the associated longitude and
latitude information (“Log files”) has been
recorded using a Sony GPS unit. Follow the
procedure described below.
1 Connect the GPS unit to the USB port.
2 Press HOME.
3 Press G/g to select “Photo”.
4 Press F/f to select the GPS unit, then
press
.
5 Select the following items using F/f, then
set them using G/g.
–Time Zone
–DST
6 Select “OK”, then press .
The GPS log files are loaded.
7 Disconnect the GPS unit and connect the
device on which the photograph is stored.
8 Select a photograph (page 21).
9 Press the green/red buttons to zoom in/out
on the map.
23
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\070OPT.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Optional Equipment
Using BRAVIA Sync with
Control for HDMI
The Control for HDMI function enables the
TV to communicate with the connected
equipment that is compatible with the
function, using HDMI CEC (Consumer
Electronics Control).
For example, by connecting Sony equipment
that is compatible with Control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
You can operate the connected Sony
equipment that has the BRAVIA Sync logo
by the TV remote by pressing:
m/N/X/M/x to operate the connected
equipment directly.
SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g, , colour buttons,
and
RETURN.
OPTIONS to display “Device Control”, then select
options from “Options” and “Content List” to
operate the equipment.
Refer to the instruction manual of the equipment for
available control.
If “Control for HDMI” of the TV is set to
“On”, “Control for HDMI” of the
connected equipment is also automatically
switched to “On”.
To connect the equipment that is
compatible with Control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the
DIGITAL AUDIO OUT (OPTICAL) jack of
the TV and the audio system using an optical
audio cable (page 18).
To make the Control for HDMI settings
The Control for HDMI settings must be set on
both the TV side and connected equipment
side. See “HDMI Set-up” (page 35) for the TV
side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\080NET.fm
masterpage:Left
24
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Home Network Features
With this TV, you can enjoy contents stored in
DLNA-compatible devices on the home
network.
Devices that store and provide contents, such
as photo/music/video files, are called
“Server”. The TV receives the photo/music/
video files from the server via the network,
and you can enjoy them on the TV even in
other rooms.
To enjoy the home network, a DLNA-
compatible device (VAIO, Cyber-shot, etc.) is
necessary as a server.
In addition, when you connect your TV to the
Internet, you can enjoy displaying a
photograph that shows its location on the map
(page 22), or enjoy "AppliCast" while
watching a TV programme (page 25).
~
You will need to contract with an Internet service
provider to connect to the Internet.
Connecting to the Network
Network cable (not supplied)
Broadband router
DSL modem/
Cable modem
To network devices
Internet
TV
Network
cable
(not
supplied)
25
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\080NET.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Home Network Features
Enjoying AppliCast
While watching TV, you can display variety of
information on the edge of TV screen by using
Widgets (i.e. mini-applications).
Many Widgets retrieve information from the
Internet.
To Use Widgets
Widgets can be displayed by selecting from
the Home Menu. While the Widget is
displayed, you can add to your Widget list so
that it would be registered to be automatically
displayed next time when you launch
"AppliCast". Some Widgets allow you to save
settings to provide you with the preferred
information.
1 Press HOME.
2 Press G/g to select "Network".
3 Press F/f to select the desired Widget to
be displayed or simply select "AppliCast"
icon to display your preferred list of
Widgets.
4 Follow the instruction on the Widget.
To return to single picture mode
Press RETURN.
To Add or remove Widgets in AppliCast
You can add to or remove from the Widget
list.
From Widget:
5 While you are displaying the Widget,
press OPTIONS.
6 Select "Add to AppliCast" or "Remove
from AppliCast".
Up to 30 Widgets can be registered in
"AppliCast".
From "Network" in the Home Menu:
7 Follow STEP1-2 above.
8 Press F/f to select the desired Widget,
then press OPTIONS.
9 Follow STEP6.
z
There are three Widgets already in the set that
don't require internet connection. They are "How
to use AppliCast", "Analogue Clock", and
"Calendar".
AppliCast Widgets stored in the USB Mass
Storage Device connected to BRAVIA. The
Widget icons should appear under USB icon under
"Network" in the Home Menu.
~
MAC address and IP address are transmitted
automatically from the TV to servers while
internet connection is available.
The servers are under the control of Sony and
MAC address will never be transmitted to the
servers controlled by the other parties.
Widgets may be changed or terminated without
prior notification to the user.
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\080NET.fm
masterpage:Left
26
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Enjoying Photo/Music/
Video Files via the Network
You can enjoy photo/music/video files on the
server easily by selecting an icon on the Home
Menu of the TV.
1 Press HOME.
2 Press G/g to select “Photo”, “Music”, or
“Video”.
3 Press F/f to select a server, then press .
The file or folder list appears.
To display the thumbnail list, press the
yellow button while the list is displayed.
When the server cannot be found
See “Checking the Network Connection”
(page 27) and “Adjusting the Server
Display Settings” (page 27).
4 Press F/f to select a file or folder, then
press .
When you select a folder, select a file,
then press .
Playback starts.
z
A map can be displayed with a photograph in the
case of longitude and latitude information has
been recorded to photograph’s Exif data
(page 22).
~
Depending on the network device, it may be
necessary to register the TV with the network
device.
Picture quality may appear coarse when using
Photo because images may be enlarged depending
on the file. Also, images may not fill the entire
screen depending on the image size and aspect
ratio.
Some photo files may take some time to be
displayed when using Photo.
To play files that are received from a network
device, they need to conform to one of the
following file formats.
Still images: JPEG format
Music: MP3 format or linear PCM format
Video: The following file formats stored on the
server: AVCHD, HDV, MPEG2-PS (which in
some cases may not be able to be played)
Depending on the network device, the file format
may be converted before transfer. In such cases,
the file format resulting after conversion is used
for playback. For details, refer to the instruction
manual for the network device being used.
Even files conforming to one of the file formats
given above cannot be played in some cases.
The file name and folder name support only
English.
To enjoy photographs, music and
videos on the TV screen by operating
devices
– Renderer
Renderer is a feature for playing photo, music
and video files stored in network devices
(digital still cameras, mobile phones, etc.) on
the TV by operating the controller device in
question. To use this feature, a renderer-
compatible device such as a digital still camera
or mobile phone is required as the controller.
Refer as well to the instruction manual
supplied with the controller.
1 Set “Renderer Function”, “Renderer
Access Control” and “Renderer Set-up” in
“Network Settings” if necessary
(page 40).
2 Play the file selected using the controller
on the TV.
The file is played on the TV over the
connected network.
Use the controller or the TV’s remote to
perform operations during playback.
~
You can register the background music to be
played during a slideshow using Photo. While
playing back music, press OPTIONS, then select
“Add to Slideshow”.
27
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\080NET.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Home Network Features
Checking the Network
Connection
Enter the respective (alphanumeric) values for
your router. The items that need to be set may
differ, depending on the Internet service
provider or the router. For details, refer to the
instruction manuals that have been provided
by your Internet service provider or supplied
with the router.
1 Press HOME.
2 Press G to select “Settings”.
3 Press F/f to select “Network Settings”,
then press .
4 Select “Network”, then press .
5 Select “IP Address Settings”, then press
.
6 Select an item, and press .
When you select “DHCP (DNS
automatic)”
Go to step 7.
When you select “DHCP (DNS manual)”
Set “Primary DNS”/“Secondary DNS”
using F/f/g and the number buttons.
When you select “Manual”
Set the following items using F/f/g and
the number buttons.
IP Address
Subnet Mask
Default Gateway
Primary DNS/Secondary DNS
If your ISP has a specific proxy server
setting
Press OPTIONS, then press F/f to select
“Proxy Set-up” and press . Then enter
the settings.
7 Press .
8 Press g to select “Test”, then press .
9 Press G/g to select “Yes”, then press .
The network diagnostic starts.
When the message “Connection
successful.” appears, press
RETURN
repeatedly to exit.
z
If “Connection successful.” does not appear, see
“Troubleshooting” (page 46).
Adjusting the Server
Display Settings
You can select home network servers to be
displayed on the Home Menu.
Up to 10 servers can be displayed on the Home
Menu automatically.
1 Set the server to allow connections from
the TV.
For details on settings on the server, refer
to the Operating Instructions supplied
with the server.
2 Press HOME.
3 Press G/g to select “Settings”.
4 Press F/f to select “Network Settings”,
then press .
5 Select “Server Display Settings”, then
press .
6 Select the server you want to display on
the Home Menu, then press .
7 Select “Yes”, then press .
If you cannot connect to your home
network
The TV can check if the server is being
correctly recognised.
1 Press HOME.
2 Press G/g to select “Settings”.
3 Press F/f to select “Network Settings”,
then press .
4 Select “Server Diagnostics”, then press
.
5 Select “Yes”, then press .
The server diagnostic starts.
When the server diagnostic is complete,
the diagnostic result list appears.
6 Select the server you want to confirm,
then press .
The diagnostic results of the selected
server appear.
If the diagnostic results indicate a failure,
look up the possible causes and what to
do, and check connections and settings.
For details, see “Troubleshooting”
(page 46).
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
28
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Navigating through TV Home Menu on XMB™
The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the
TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA
TV.
1 Press HOME to display the XMB™.
2 Press G/g to select the category.
3 Press F/f to select the item, then press .
4 Follow the instructions on the screen.
5 Press HOME to exit.
~
The options you can adjust vary depending on the situation.
Unavailable options are greyed out or not displayed.
Media category icon Description
Settings You can make advanced settings and adjustments (page 29).
Photo You can enjoy photo files via USB devices or the network (page 21,
26).
Music You can enjoy music files via USB devices or the network (page 21,
26).
Video You can enjoy video files via USB devices or the network (page 21,
26).
Digital You can select a digital channel, Digital Favourite list (page 17) and
the Digital Electronic Programme Guide (EPG) (page 16).
Analogue You can select an analogue channel or Analogue Favourite list
(page 17).
To hide the list of analogue channels, set “Programme List Display”
to “Off” (page 36).
External Inputs You can select equipment connected to the TV.
To assign a label to an external input, see “AV Preset” (page 35).
Network You can enjoy “AppliCast” (page 25).
Category Object Bar
Media Category Bar
29
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
TV Settings Menu
You can update the TV system using USB memory. Obtain information from the website below.
http://support.sony-europe.com/TV/
System Update
Clock/Timers
Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of
time.
When “Sleep Timer” is activated, the (Timer) indicator on the TV front panel
lights up in orange.
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
On Timer Sets the TV to automatically turn on from standby mode.
Auto Clock Update Switches to digital mode and obtains the time.
Eco
Reset Resets all the “Eco” settings to the factory settings.
Power Saving Reduces power consumption of the TV by adjusting the backlight.
When you select “Picture Off”, the picture is switched off, and the Picture Off
indicator on the TV front panel lights up in green. The sound remains unchanged.
Idle TV Standby Turns the TV off after it has been kept idle for the preset length of time.
PC Power
Management
Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.
Light Sensor Automatically optimises the picture settings according to the ambient light in the
room.
~
Do not put anything over the sensor, doing so may affect its function. Check the
position of the sensor (page 13).
Picture
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. AV1)
Allows you to make custom settings for the input.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
30
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Picture Mode Sets a picture mode. The options that can be selected differ depending on the scene
select settings.
Vivid Enhances picture contrast and sharpness.
Standard For standard pictures. Recommended for home
entertainment.
Custom Allows you to store your preferred settings.
Cinema For viewing film-based content. Most suitable when viewing
the TV in a theatre-like environment.
Photo-Vivid For viewing photographs. Enhances picture contrast and
sharpness.
Photo-Standard For viewing photographs. Provides the optimum picture
quality for viewing in the home.
Photo-Original For viewing photographs. Represents the picture quality used
when imaging developed photographs.
Photo-Custom For viewing photographs. Allows you to store your preferred
settings.
Sports Provides the optimum picture quality for viewing sports.
Game Most suitable for when playing games on your TV.
Graphics Provides the optimum picture quality for viewing graphics.
Reset Resets all the “Picture” settings to the factory settings excluding “Target Inputs”,
“Picture Mode” and “Advanced Settings”.
Backlight Adjusts the brightness of the backlight.
Contrast Increases or decreases picture contrast.
Brightness Brightens or darkens the picture.
Colour Increases or decreases colour intensity.
Hue Increases or decreases the green tones and red tones.
~
“Hue” can be adjusted only for the NTSC colour signal (e.g. U.S.A. video tapes).
Colour Temperature Adjusts the whiteness of the picture.
Cool Gives white colours a blue tint.
Neutral Gives white colours a neutral tint.
Warm 1/Warm 2 Gives white colours a red tint. “Warm 2” gives a redder tint
than “Warm 1”.
z
“Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid”
(or “Photo-Vivid”).
Sharpness Sharpens or softens the picture.
Noise Reduction Reduces the noise level of pictures (snowy pictures).
MPEG Noise
Reduction
Reduces picture noise in MPEG-compressed videos. This is effective when
viewing a DVD or digital broadcast.
Motionflow Provides smoother picture movement and reduces picture blur.
High Provides smoother picture movement such as for film-based
contents.
Standard Provides smooth picture movement. Use this setting for
standard use.
Off Use this setting when the “High” or “Standard” settings result
in noise.
~
Depending on the video, you may not see the effect visually, even if you have
changed the setting.
31
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Film Mode Provides improved picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
Auto 1 Provides smoother picture movement than the original film-
based content. Use this setting for standard use.
Auto 2 Provides the original film-based content as is.
Off
~
• If the image contains irregular signals or too much noise, “Film Mode” is
automatically turned off even if “Auto 1” or “Auto 2” is selected.
Advanced Settings Allows you to set “Picture” settings in more detail. These settings are not available
when “Picture Mode” is set to “Vivid” (or “Photo-Vivid”).
Reset Resets all the advanced settings to the factory settings.
Black Corrector Enhances black areas of the picture for stronger contrast.
Adv. Contrast
Enhancer
Automatically adjusts “Backlight” and “Contrast” to the most
suitable settings judging from the brightness of the screen.
This setting is especially effective for dark images scenes,
and will increase the contrast distinction of the darker picture
scenes.
Gamma Adjusts the balance between bright and dark areas of the
picture.
Auto Light
Limiter
Reduces glare such as in scenes where the entire screen is
white.
Clear White Emphasises white colours.
Live Colour Makes colours more vivid.
White Balance Adjusts the temperature of each colour.
~
In Digital mode, in order to optimize each signal quality the picture settings are applied independently for
HD (High-definition) and SD (Standard-definition) pictures.
Sound
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. AV1)
Allows you to make custom settings for the input.
Sound Mode Sets a sound mode. “Sound Mode” includes options best suited for video and
photographs, respectively. The options that can be selected differ depending on the
scene select settings.
Dynamic Enhances the treble and bass sounds.
Standard For standard sounds. Recommended for home entertainment.
Clear Voice Makes voice sound clearer.
Reset Resets all the “Sound” settings to the factory settings excluding “Target Inputs”,
“Sound Mode” and “Dual Sound”.
Treble Adjusts higher-pitched sounds.
Bass Adjusts lower-pitched sounds.
Balance Emphasises the left or right speaker.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
32
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Auto Volume Keeps volume level constant across all programmes and adverts (e.g. adverts tend
to be louder than programmes).
Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target
Inputs” is set to the current input name (e.g. AV1).
Surround Allows you to select the suitable surround effects depending on the genre of TV
programme (movie, sport, music, etc.) or video game.
The options that can be selected differ depending on the “Scene Select” settings.
S-FORCE Front
Surround
Delivers surround effects that help you enjoy the virtual
multi-ch surround audio with just the two internal TV
speakers.
Cinema Delivers surround effects just like the high-grade audio
systems found in movie theatres.
Music Delivers surround effects that make you feel like you are
surrounded by sound as in a music hall.
Sports Delivers surround effects that make you feel like you are
watching a live sports contest.
Game Delivers surround effects that enhance game sound.
Off Converts and reproduces multi-ch audio to 2ch audio. In the
case of other audio formats, the original audio is reproduced.
Voice Zoom Adjusts the sound level of human voices. For example, if the voice of a news
announcer is indistinct, you can turn up this setting to make the voice louder.
Conversely, if you are watching a sports programme, you can turn down this
setting to soften the voice of the commentator.
Sound Enhancer Enhances high-frequency sounds.
Sound Booster Produces a fuller sound for more impact, by emphasizing the treble and bass
sounds.
Dual Sound Sets the sound from the speaker for a stereo or bilingual broadcast.
Stereo/Mono For stereo broadcasts.
A/B/Mono For bilingual broadcasts, select “A” for sound channel 1, “B”
for sound channel 2, or “Mono” for mono channel, if
available.
~
• For other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A”, or
“B”.
33
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Screen (for inputs other than a PC)
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common”.
Name of current
input (e.g. AV1)
Allows you to make custom settings for the input.
Screen Format See “To change the Screen Format manually” (page 15).
Auto Format Automatically changes “Screen Format” to match the broadcast signal. If you want
to use the setting that you specified in “Screen Format”, select “Off”.
4:3 Default Sets the default screen format for 4:3 broadcasts.
Smart Displays conventional 4:3 broadcasts with an imitation wide
screen effect.
4:3 Displays conventional 4:3 broadcasts in the correct
proportion.
Off Uses the setting that you specified in “Screen Format”.
Display Area Adjusts the picture display area.
Auto Automatically switches to the most appropriate display area.
+1 Displays pictures in their original size.
Normal Displays pictures in their recommended size.
-1/-2 Enlarges the picture so that the edges are outside the visible
display area.
~
• These options may change depending on the input displayed.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Smart”,
“Zoom” or “14:9”.
Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart”.
Screen (for PC input)
Auto Adjustment Automatically adjusts the display position, phase, and pitch of the picture when the
TV receives an input signal from the connected PC.
z
• “Auto Adjustment” may not work well with certain input signals. In such cases,
manually adjust “Phase”, “Pitch”, “Horizontal Shift”, and “Vertical Shift”.
Reset Resets all PC screen settings to factory settings.
Phase Adjusts the phase when the screen flickers.
Pitch Adjusts the pitch when the picture has unwanted vertical stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Vertical Shift Adjusts the vertical position of the picture.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
34
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Screen Format Sets “Screen Format” for displaying pictures from your PC.
Normal Displays the picture in its original size.
Full 1 Enlarges the picture to fill the vertical display area, while
maintaining its original proportion.
Full 2 Enlarges the picture to fill the display area.
Video Settings
Colour System Sets the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or
“NTSC4.43”) according to the input signal from the input source.
Audio Settings
Speaker TV Speaker Turns on and outputs the TV’s sound from the TV speakers.
Audio System Turns off the TV speakers and outputs the TV’s sound from
external audio equipment connected to the audio output
sockets/jacks on the TV.
Audio Out Variable When using an external audio system, volume output from
audio out can be controlled using the TV’s remote.
Fixed The audio output of the TV is fixed. Use your audio
receiver’s volume control to adjust the volume (and other
audio settings) through your audio system.
Headphone Settings i Speaker Link Switches the TV’s internal speakers on/off when you connect
headphones to the TV.
i Volume Adjusts the volume of the headphones when “i Speaker
Link” is set to “Off”.
i Dual Sound Sets the sound from the headphones for a bilingual broadcast.
Optical Out Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)
jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby
Digital. Set to “PCM”, when connecting equipment not compatible with Dolby
Digital.
Set-up
USB Auto Start
Automatically starts photo playback when the TV is turned on and a digital still camera or
other device storing photo files is connected to the USB port then turned on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
Quick Start The TV turns on faster than usual by turning on the power using the remote.
However, power consumption in standby mode is approximately 20 watts higher
than usual. Up to 3 out of 5 time zones can be set.
35
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
AV Preset Assigns an icon or name to equipment connected to the side and rear sockets/jacks.
The icon and name appear briefly on the screen when you select the equipment.
1 Press F/f to select the desired input source, then press .
Skip AV Inputs For each input, sets whether or not to display on the Home
Menu or in a list of inputs that will appear when you press
.
Auto
Displays the icon and name only when the equipment is
connected (except for AV1 or AV2 inputs).
Always Display
Always displays the icon and name regardless of whether or
not the equipment is connected.
Skip
Does not display the icon and name even if the equipment is
connected.
2 Press g to assign an icon and name.
Label AV Inputs Uses preset labels to assign a name to connected equipment.
Allows you to create your own label when you select “Edit”.
Edit
Allows you to edit the name in the edit screen and choose the
appropriate icon.
AV2 Input Sets a signal to be input through the socket labelled / / AV2 on the rear
of the TV.
Auto Switches automatically among the signals of RGB input, S
video input, Composite video input depending on the input
signal.
RGB Inputs the RGB signal.
S Video Inputs the S Video signal.
Composite Inputs the Composite video signal.
AV2 Output Sets a signal to be output to the / / AV2 socket. If you connect a VCR
or other recording equipment to the / / AV2 socket, you can record the
output signal from other equipment connected to the TV.
~
• This function may have some restrictions depending on the input displayed.
TV Outputs TV broadcasts.
AV1 Outputs signals from equipment connected to the /
AV1 socket.
AV3 Outputs signals from equipment connected to the AV3
socket.
Auto Outputs whatever is being viewed on the screen (except
signals from the / COMPONENT IN, HDMI IN1, 2, 3,
or 4, and PC IN / sockets).
HDMI Set-up Allows the TV to communicate with equipment that is compatible with the Control
for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that
communication settings must also be made on the connected equipment.
Control for HDMI Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with Control for
HDMI. When set to “On”, the following functions are
available.
If the specific Sony equipment that is compatible with
Control for HDMI is connected, this setting is applied to the
connected equipment automatically when the “Control for
HDMI” is set to “On” using the TV.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
36
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Auto Devices Off When this is set to “On”, the connected equipment that is
compatible with Control for HDMI turns off when you turn
off the TV.
Auto TV On When this is set to “On”, the TV turns on when you turn on
the connected equipment that is compatible with Control for
HDMI.
Tuner Box
Control
If set to “Advanced”, you can select a channel tuned by
connected equipment using the TV’s remote.
HDMI Device List Displays a list of connected equipment that is compatible
with Control for HDMI.
~
• You cannot use “Control for HDMI” if the TV operations are linked to the
operations of an audio system that is compatible with Control for HDMI.
Auto Start-up You can run the initial Set-up that appeared when you first connected the TV, and
select the language and country/area, or tune in all available channels again.
Even if you have made the settings when you first connected the TV, you may
need to change the settings after moving house, or to search for newly launched
channels.
Language Sets the language displayed on the menu screens.
Product Information Displays product information of the TV.
Factory Settings Resets all settings to factory settings except for the "Favourite" settings and
programme preset data. After completing this process, the initial set-up screen is
displayed. Completing auto tuning in initial set-up will reset the settings that are
not reset by "Factory Settings". To retain the settings, skip the "Auto Tuning".
Analogue Set-up
Programme List
Display
Select “Off” to hide the list of analogue channels from the XMB™
(XrossMediaBar).
1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one
preset number button (0 – 9) on the remote.
~
• When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and
above by entering two digits on the remote.
Favourite Set-up Adds channels in a Favourite list.
To reset the favourite channels, select “– – –”.
Auto Tuning Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Programme Sorting Changes the order of analogue channels stored in the TV.
1 Press F/f to select the channel you want to move to a new position, then press
.
2 Press F/f to select the new position for the channel, then press .
37
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name
appears briefly on the screen when you select the channel. (Names for channels are
usually taken automatically from Text (if available).)
1 Press F/f to select the channel you want to name, then press .
2 Press F/f to select the desired letter or number (“_” for a blank space), then
press g.
If you enter a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
3 Repeat step 2 until you finish entering the name.
4 Press to exit the labeling procedure.
Intelligent Picture On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On Automatically reduces the picture noise.
Off Turns off the “Intelligent Picture” feature.
Manual Programme
Preset
To preset a channel, press PROG +/– to select the programme number, before
selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You
cannot select a programme number that is set to “Skip” (page 38).
Programme/
System/Channel
Allows you to preset programme channels manually.
1 Press F/f to select “Programme”, then press .
2 Press F/f to select the programme number you want to
manually tune (if tuning a VCR, select channel 00), then
press .
3 Press F/f to select “System”, then press .
4 Press F/f to select one of the following TV broadcast
systems, then press .
B/G: For western European countries/areas
I: For the United Kingdom
D/K: For eastern European countries/areas
L: For France
5 Press F/f to select “Channel”, then press .
6 Press F/f to select “S” (for cable channels) or “C” (for
terrestrial channels), then press g.
7 Tune the channels as follows:
If you do not know the channel number
(Frequency)
Press F/f to search for the next available channel. The
search stops when a channel is found. To continue
searching, press F/f.
If you know the channel number (Frequency)
Press the number buttons to enter the channel number of
the broadcast you want to tune, or the channel number of
your VCR.
8 Press to jump to “Confirm”, then press .
Repeat the above procedure to preset other channels
manually.
Label Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in “Programme
Labels” (page 37).
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
38
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
AFT Allows you to fine-tune the selected channel manually if you
feel that a slight tuning adjustment may improve picture
quality.
When “On” is selected, fine tuning adjustments are made
automatically.
Audio Filter Improves the sound of individual channels when distortion
occurs in mono broadcasts (normally set to “Off”).
~
You cannot receive stereo or dual sound when “Low” or
“High” is selected.
Skip Skips unused analogue channels when you press PROG +/–
to select channels. To select channels you have programmed
to skip, use the corresponding number buttons.
LNA Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
Confirm Saves changes you have made to the “Manual Programme
Preset” settings.
Digital Set-up
Subtitle Set-up Subtitle Setting When set to “For Hard Of Hearing”, visual aids for the
hearing impaired are displayed with the subtitles (when such
visual aids are available).
Preferred
Language
Allows you to select the language of the subtitles.
Audio Set-up Audio Type Switches to broadcast for the hearing impaired when you
select “For Hard Of Hearing”.
Preferred
Language
Sets the language to be used for a programme. Some digital
channels may broadcast several audio languages for a
programme.
Audio
Description
Provides audio description (narration) of visual information,
when such information is available.
Mixing Level Adjusts the TV main audio and “Audio Description” output
levels.
Dynamic Range Compensates for differences in the audio level between
different channels (only for Dolby Digital audio).
~
The effect may not function or may vary depending on the
programme regardless of the “Dynamic Range” setting.
MPEG Audio
Level
Adjusts the MPEG audio sound level.
Digital Tuning Digital Auto
Tuning
Tunes in the available digital channels.
You can retune the TV after moving house, or to search for
newly launched channels.
39
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Using Menu Functions
Programme
Sorting
Allows you to remove or change the order of digital channels
stored in the TV.
1 Press F/f to select the channel you want to remove or
move to a new position.
2 Remove or change the order of the digital channels as
follows:
To remove a digital channel
Press . After a confirmation message appears, press G
to select “Yes”, then press .
To change the order of the digital channels
Press g, then press F/f to select the new position for the
channel and press G.
3 Press RETURN.
Digital Manual
Tuning
Tunes the digital channels manually. This feature is available
when “Digital Auto Tuning” is set to “Antenna”.
1 Press the number buttons to enter the channel number
you want to tune, or press F/f.
2 When the available channels are found, press F/f to
select the channel you want to store, then press .
3 Press F/f to select the channel number where you want
to store the new channel, then press .
Repeat the above procedure to tune other channels.
LNA Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
Radio Display Displays the screen wallpaper when you listen to a radio broadcast. You can select
the screen wallpaper colour, display a random colour or view a slideshow (page 21,
26). To cancel the screen wallpaper display temporarily, press any button.
Parental Lock Sets an age restriction to viewing. To view any programme rated for ages above
the age you specify, enter the correct PIN code.
PIN Code Enter your PIN code to activate “Parental Lock”. You can also change the PIN
code.
z
PIN code 9999 is always accepted.
Technical Setup Auto Service
Update
Enables the TV to detect and store new digital services as
they become available.
System Update Enables the TV to automatically receive free software
updates through your existing aerial/antenna/cable (when
issued). We recommend that you leave the setting to “On” at
all times.
System
Information
Displays the current software version and the signal level.
Time Zone Allows you to manually select the time zone you are in, if it is
not the same as the default time zone setting for your country/
area.
Auto DST Select “On” to automatically switch between summer time
and winter time according to the calendar.
Service
Replacement
Select “On” to automatically change the channel when
broadcaster changes transmission of the viewing programme
to a different channel.
CA Module Set-up Provides access to a pay TV service after you obtain a Conditional Access Module
(CAM) and a view card. See the location of the (PCMCIA) socket (page 18).
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
40
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Network Settings
Network IP Address
Settings
Manual
Allows you to set the network settings according to your
network environment.
DHCP (DNS manual)
Automatically acquires the network settings except for DNS
server settings. You can manually set the DNS settings.
DHCP (DNS automatic)
Automatically acquires the network settings through the
Dynamic Host Configuration Protocol server function of the
router or Internet service provider.
Test Diagnoses whether the network is correctly connected.
IP Address/
Subnet Mask/
Default Gateway/
Primary DNS/
Secondary DNS
You need to configure each item when “Manual” is selected
in “IP Address Settings”.
When “DHCP (DNS manual)” is selected, be sure to enter
“Primary DNS” and “Secondary DNS” server addresses
manually.
MAC Address Displays the “MAC address”, which is a fixed, globally
unique identifier of the network device.
Server Display
Settings
Displays the connected server list and allows you to select the server you want to
display on the Home Menu.
Server Diagnostics Diagnoses whether the TV can connect to each server on the home network.
Renderer Function Enables playback of photo/music/video files on the TV through other control
devices on the network, such as a digital still camera or mobile phone.
Renderer Access
Control
Allows you to specify the accessible controller to the TV. When this setting is set
to “On”, you can playback Photo/Music/Video files on the TV using the controller.
Renderer Set-up Automatic
Access
Permission
Allows you to select whether to permit access to the TV
automatically when a network device accesses the TV for the
first time.
Renderer Name Allows you to set the name of the TV to be shown on the
controller.
41
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL100 Wall-Mount Bracket (sold separately).
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
Refer to “Detaching the Table-Top Stand from the TV” (page 6).
Refer to “TV installation dimensions table” (page 42).
Refer to “Hook locations diagram/table” (page 42).
~
Place the TV on the Table-Top Stand, when securing the Mounting Hook.
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
Screw
(+PSW4 × 12)
Mounting Hook
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
42
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Unit: cm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
the TV. Refer to “Specifications” (page 43) for its weight.
TV installation dimensions table
Display dimensions
Screen
centre
dimension
Length for each mounting angle
Angle (0°) Angle (20°)
AB C DEFGH
58.6 37.8 13.3 32.4 14.1 23.0 36.3 32.6
Hook locations diagram/table
Hook location
b
Screen centre point
WARNING
Hook location
When installing the TV onto the Base Bracket.
b
a
43
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Colour/video system
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Sound output
5 W + 5 W
Input/Output jacks
Aerial/Antenna cable
75 ohm external terminal for VHF/UHF
/ AV1
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
// AV2
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and selectable audio/
video output.
COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B/CB: 0.7 Vp-p, 75 ohms/
P
R/CR: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN1 only)
PC Input (page 44)
AV3
Video input (phono jack)
AV3
Audio input (phono jacks)
DIGITAL AUDIO
OUT (OPTICAL)
Digital optical jack (Two channel linear PCM, Dolby Digital)
Audio output (phono jacks)
PC IN
PC Input (D-sub 15-pin) (page 44)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
USB port
i
Headphones jack
CAM (Conditional Access Module) slot
LAN
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
44
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
*Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4
~
This TV’s PC input does not support Sync on Green or Composite Sync.
This TV’s PC input does not support interlaced signals.
For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured
diagonally)
22 inches / Approx. 55 cm
Display resolution
1,366 dots (horizontal) × 768 lines (vertical)
Power
consumption
in “Home”/
“Standard”
mode
37 W
in “Shop”/
“Vivid”
mode
45 W
Standby power
consumption*
0.37 W (17 W when “Quick Start” is set to “On”)
Supplied accessories
See “To check the accessories” (page 4).
Optional
accessories
Wall-Mount
Bracket
SU-WL100
Dimensions (Approx.) (w × h × d)
with Table-Top Stand
58.6 x 39.8 x 15.6 cm
without Table-Top Stand
58.6 x 37.8 x 9.0 cm
Mass (Approx.)
with Table-Top Stand
7.0 kg
without Table-Top Stand
6.5 kg
Resolution
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Standard
Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA
640 × 480 31.5 60 VESA
640 × 480 37.5 75 VESA
720 × 400 31.5 70 VESA
SVGA
800 × 600 37.9 60 VESA
800 × 600 46.9 75 VESA
XGA
1024 × 768 48.4 60 VESA
1024 × 768 56.5 70 VESA
1024 × 768 60.0 75 VESA
WXGA
1280 × 720 45.0 60 EIA
1280 × 768 47.4 60 VESA
1280 × 768 47.8 60 VESA
1360 × 768 47.7 60 VESA
45
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the 1 (standby) indicator flashes between each two second break.
For example, the indicator may flash three times, go off for two seconds, then flash again three
times.
2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony
service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1 Check the items in the tables below.
2 If the problem persists, have your TV serviced by qualified service personnel.
Condition Explanation/Solution
Picture
There is no picture (screen is
dark) and no sound.
Check the aerial/antenna/cable connection.
Connect the TV to the mains/AC power, and press 1 on the TV.
If the 1 (standby) indicator lights up in red, press "/1.
No picture or menu
information from equipment
connected to the scart
connector appears on the
screen.
Press to display the list of inputs, then select the desired input.
Check the connection between the optional equipment and the TV.
Ghosting occurs, or double
images appear.
Check the aerial/antenna/cable connection.
Check the aerial/antenna location and direction.
Only snow and noise appear
on the screen.
Check if the aerial/antenna is broken or bent.
Check if the aerial/antenna has reached the end of its serviceable life
(three to five years for normal use, one to two years when used at the
seaside).
There is picture or sound noise
when viewing a TV channel.
Adjust “AFT” (Automatic Fine Tuning) to obtain better picture
reception (page 38).
Tiny black points and/or
bright points appear on the
screen.
The screen is composed of pixels. Tiny black points and/or bright points
(pixels) on the screen do not indicate a malfunction.
The picture contours are
distorted.
Select “Standard” or “Off” in “Motionflow” (page 30).
Change the current setting of “Film Mode” to other settings (page 31).
The picture is not displayed in
colour.
Select “Reset” (page 30).
The picture from equipment
connected to the
COMPONENT IN
sockets is not displayed in
colour, or is displayed in
irregular colours.
Check the connection of the COMPONENT IN sockets and check if
the sockets are firmly seated in their respective sockets.
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
46
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
No picture from the connected
equipment appears on the
screen.
Turn the connected equipment on.
Check the cable connection.
Press to display the list of inputs, then select the desired input.
Correctly insert the memory card or other storage device in the digital
still camera.
Use a digital still camera memory card or other storage device that has
been formatted according to the instruction manual supplied with the
digital still camera.
Operations are not guaranteed for all USB devices. Also, operations
differ depending on the features of the USB device and the video being
played.
You cannot select the
connected equipment on the
Home Menu or you cannot
switch the input.
Check the cable connection.
Set the server to be displayed on the Home Menu (page 27).
Sound
The picture is good, but there
is no sound.
Press 2 +/– or % (Mute).
Check if the “Speaker” is set to “TV Speaker” (page 34).
When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.
Channels
You cannot select your
desired channel.
Switch between digital and analogue mode, and select the desired
digital/analogue channel.
Some channels are blank. The channel is for scrambled/subscription service only. Subscribe to a
pay TV service.
The channel is used only for data (no picture or sound).
Contact the broadcaster for transmission details.
You cannot view digital
channels.
Contact a local installer to find out if digital transmissions are provided
in your area.
Upgrade to a higher gain aerial/antenna.
Home Network
Connection diagnostic results
indicate a failure.
Check Connections
Use a straight cable for the LAN cable.
• Check if the cable is connected firmly.
• Check the connection between the TV and the router.
Check Settings
• Change the IP address for the DNS server (“Checking the Network
Connection” (page 27)) while referring to the following.
–Contact your Internet service provider.
–Specify the IP address of the router if you do not know the DNS of
your Internet service provider.
The server cannot be found, a
list cannot be retrieved, and
playback fails.
Once server settings are changed, turn the TV off and on by pressing 1
on the TV.
Execute “Server Diagnostics” (page 27).
When using a PC as the server
Check if the PC is turned on. Do not turn off the PC while accessing.
If security software is installed on the PC, be sure to allow connections
from external devices. For details, refer to the manual supplied with your
security software.
The load on the PC may be too high or the server application may
become unstable. Try the following:
–Stop the server application and restart it.
–Restart the PC.
–Reduce the number of applications running on the PC.
–Reduce the amount of content.
Condition Explanation/Solution
47
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Changes on the server are not
being applied or displayed
content differs from content
on the server.
Sometimes changes are not applied to displays on the TV even though
content has been added and/or deleted on the server. If this happens, go
back up one level and try opening the folder or server again.
Photo, music and/or video
files do not appear or icons are
not displayed.
Preliminary Check
Check that the connected device supports DLNA.
• Operations are not guaranteed for all servers. Also, operations differ
depending on the features of the server and the content in question.
Turn the connected device on.
Check Connections
• Check that the LAN cable and/or mains lead/AC power cord of the
server has not become disconnected.
Check Settings
Check that the connected device is registered under “Server Display
Settings” (page 27).
• Check that the server is correctly configured.
Check that the selected device is connected to the network and can be
accessed.
• If the “IP Address Settings” in “Network” under “Network Settings” is
set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take
some time to recognise devices if there is no DHCP server. Execute
“Server Diagnostics” (page 27).
The TV cannot be found from
renderer-compatible device
(the controller).
Check Connections
• Check that the LAN cable and/or mains lead of the server has not
become disconnected.
Check Settings
• Check if the “Renderer Function” is activated (page 40).
• Check that the connected device is registered under “Renderer Access
Control” (page 40).
Only a few icons appear under
the "Network" in the Home
Menu.
This is normal when internet connection is not available.
You can use three pre-installed Widgets properly. To enjoy more
Widgets, please check that the LAN cable and/or mains lead/AC power
cord of the router/modem has not become disconnected. (*)
You have been using
registered Widgets, but now
some contents won't appear on
the Widgets.
Check that the LAN cable and/or mains lead/AC power cord of the
router/modem has not become disconnected. (*)
There's a possibility that the Widget Provider's server is out of service.
Please try using the Widget later.
(*) Your router/modem must be properly set to connect to the internet in
advance. Please contact your Internet Service Provider for the router/
modem settings.
General
Distorted picture and/or sound Keep the TV away from electrical noise sources such as cars,
motorcycles, hair-dryers or optical equipment.
When installing optional equipment, leave some space between the
optional equipment and the TV.
Check the aerial/cable connection.
Keep the aerial/cable TV cable away from other connecting cables.
The TV turns off
automatically (the TV enters
standby mode).
Check if the “Sleep Timer” is activated, or confirm the “Duration”
setting of “On Timer” (page 29).
Check if the “Idle TV Standby” is activated (page 29).
If no signal is received and no operation is performed in the TV mode
for 30 minutes, the TV automatically switches to standby mode.
The TV turns on
automatically.
Check if the “On Timer” is activated (page 29).
Some input sources cannot be
selected.
Select “AV Preset” and cancel the “Skip” setting for the input source
(page 35).
The remote does not function. Replace the batteries.
Condition Explanation/Solution
(Continued)
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
48
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
HDMI equipment does not
appear on “HDMI Device
List”.
Check that your equipment is compatible with Control for HDMI.
You cannot select “Off” in
“Control for HDMI”.
If you have connected any audio system that is compatible with Control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu (page 34).
Not all channels are tuned for
cable.
Check the support website for cable provide information.
http://support.sony-europe.com/TV/DVBC/
Condition Explanation/Solution
49
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover
in the UK. Digital UK provides impartial information on what people need to do to prepare for the
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,
or whether you'll have to wait until switchover, at www.digitaluk.co.uk).
When the TV switchover happens in your area, there are at least two occasions when you will need
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up
new ones. Digital UK, the body leading the digital TV switchover, will advise you when you need
to re-tune during the switchover.
Keep this Instruction
manual safe you’ll
need it
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\100ADD.fm
masterpage:Left
50
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
How to re-tune:
1 Press "HOME" on the remote
2 Press G/g to select "Settings"
3 Press F/f to select "Digital Set-up", then press
4 Press to select "Digital Auto Tuning"
5 Press G to select "Yes" then press to start "Digital Auto Tuning"
6 Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50
50 50 or visit www.digitaluk.co.uk
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.
Rates may vary for calls from non-BT lines.
51
GB
C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\010COVIX.fm
masterpage:Left
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
Additional Information
Index
Numerics
1 Digit Direct 36
14:9 15
4:3 15
4:3 Default 33
A-G
Add to Slideshow 26
Adv. Contrast Enhancer 31
Advanced Settings 31
AFT 38
Analogue Set-up 36
AppliCast 25
Audio Filter 38
Audio Out 34
Audio Settings 34
Audio Set-up 38
Auto Adjustment 33
Auto Clock Update 29
Auto Format 33
Auto Light Limiter 31
Auto Start-up 36
Auto Tuning
analogue channels only 36
digital channels only 38
Auto Volume 32
AV Preset 35
AV2 Input 35
AV2 Output 35
Backlight 30
Balance 31
Bass 31
Batteries, inserting into the remote 4
Black Corrector 31
BRAVIA Sync 23
Brightness 30
CA Module Set-up 39
Cancel Timer 16
Category list 16
Channels
selecting 14
Skip 38
Clear White 31
Clock/Timers 29
Colour 30
Colour System 34
Colour Temperature 30
Confirm 38
Connecting
an aerial 4
network 24
optional equipment 18
Set Top Box/recorder 4
Contrast 30
Control for HDMI 23, 35
Digital Set-up 38
Digital Tuning 38
Display a photograph with the
location on the map 22
Display Area 33
Display map 22
Dual Sound 32
Duration 22
Eco 29
EPG (Digital Electronic Programme
Guide) 16
Factory Settings 36
Fast Text 15
Favourite list 17
Favourite Set-up 36
Film Mode 31
Gamma 31
H-Q
HDMI Set-up 35
Headphones
connecting 19
Headphone Settings 34
Horizontal Shift 33
Hue 30
Idle TV Standby 29
Initial Set-up 5
Installing the accessories 41
Intelligent Picture 37
Label 37
Language 36
Light Sensor 13, 29
Live Colour 31
LNA 38, 39
Manual Programme Preset 37
Motionflow 30
MPEG Noise Reduction 30
Music 21, 26
Network 40
connecting 24
Network connection 27
Network Settings 40
Noise Reduction 30
On Timer 29
Optical Out 34
PAP 20
Parental Lock 39
PC Power Management 29
Phase 33
Photo 21, 26
GPS 22
Picture 29
Picture Frame 21
Picture Mode 30
Picture Off ( ) indicator 13
PIN Code 39
PIP 20
Pitch 33
Power (") indicator 13
Power (1) switch 9
Power Saving 29
Product Information 36
Programme Labels 37
Programme List Display 36
Programme Sorting 36
Quick Start 34
R-Z
Radio Display 39
Reminder 16
Remote control 9
inserting batteries 4
sensor 13
Renderer 26
Renderer Access Control 40
Renderer Function 40
Renderer Set-up 40
Reset
Eco 29
PC settings 33
picture 30
sound 31
SCENE 10
Screen
for inputs other than a PC 33
for PC input 33
Screen Format 15, 33, 34
Server Diagnostics 40
Server Display Settings 27, 40
Set-up 34
Sharpness 30
Skip 38
Sleep Timer 29
Smart 15
Sound 31
Sound Booster 32
Sound Enhancer 32
Sound Mode 31
Speaker 34
Specifications 43
Standby (1) indicator 13
Subtitle Set-up 38
Surround 32
System Update 29
Target Inputs
picture 29
screen 33
sound 31
Technical Setup 39
Text 14
Timer ( ) indicator 13
Treble 31
Troubleshooting 45
TV buttons/indicators 9
USB Auto Start 34
Vertical Shift 33
Vertical Size 33
Video 21, 26
Video Settings 34
Voice Zoom 32
Volume Offset 32
Wide 15
XMB™ (XrossMediaBar) 28
Zoom 15
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony kdl 22e5310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony kdl 22e5310 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sony kdl 22e5310

Sony kdl 22e5310 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanôl - 291 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info