136405
98
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
98 Appendix
Appendix
About i.LINK
The HDV/DV jack provided on the unit is an
i.LINK-compliant jack. This section describes the
i.LINK standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for sending and
receiving digital video, digital audio, and other data
between the unit and other equipment equipped with
an i.LINK terminal. You can also control other
equipment using i.LINK.
i.LINK-compatible equipment can be connected using
an i.LINK cable. Possible applications are operations
and data exchange with various digital AV equipment.
When two or more i.LINK-compatible equipment are
connected to the unit, operations and data exchange are
possible with equipment directly connected to the unit
and also with equipment connected to the unit via
other equipment.
Note, however, that the method of operation may vary
depending on the characteristics and specifications of
the equipment to be connected. Also, there are cases
where operations and data exchange may not be
possible even if the connection is made.
Notes
•Normally, only one device can be connected to the
unit using i.LINK cable. When you connect the unit
to HDV/DVCAM (DV)-compliant equipment that
allows multiple connections, refer to the operating
instructions of the equipment to be connected.
i.LINK is an easy-to-remember term for the IEEE
1394 proposed by Sony, and is a trademark approved
by many corporations in Japan and overseas.
IEEE 1394 is an international standard standardized
by the Institute of Electrical and Electronics
Engineers.
About the i.LINK baud rate
The maximum baud rate of i.LINK varies depending
on the equipment. There are three types.
S100 (Approximately 100 Mbps*)
S200 (Approximately 200 Mbps)
S400 (Approximately 400 Mbps)
The baud rate is listed under “Specifications” in the
operating instructions of individual equipment. It may
be indicated near the i.LINK interface on some
equipment.
The baud rate may vary from the indicated value when
the unit is connected to equipment with a different
maximum baud rate.
*What is Mbps?
Mbps stands for “megabits per second,” or the volume of
data that can be sent or received in 1 second. For
example, a baud rate of 100 Mbps means that 100
megabits of data can be sent in 1 second.
To use i.LINK functions of the unit
For details on how to perform dubbing when the unit is
connected to other video equipment that has an i.LINK
jack, see page 44, 54.
The unit can also be connected to other i.LINK-
compatible equipment made by Sony (i.e., a VAIO
series computer) as well as video equipment.
The unit may not be able operate with some i.LINK
video equipment such as digital televisions, DVD
recorders/players, and MICROMV recorders/players
even if they are equipped with i.LINK jack. Before
connecting to another equipment, confirm whether this
equipment is HDV/DVCAM (DV) compatible.
For details on precautions on connections and whether
or not software applications compatible with the unit
are available, refer to the operating instructions of the
equipment to be connected.
Notes
•When you connect with the i.LINK cable to a
computer and the unit, check the direction of the jack.
If you forcibly insert the jack, the terminal may be
damaged or cause the unit to malfunction.Align v
mark of the i.LINK cable with V mark on the unit
and insert the i.LINK cable.
•Be sure to connect the i.LINK cable to a computer
first and then connect it to the unit. If you connect the
i.LINK cable to the unit first, it may cause the unit to
malfunction because of static electricity.
•When you connect the unit to equipment equipped
with a 6-pin type i.LINK jack, connect the cable to
the 6-pin type i.LINK jack first.
•When you connect the unit to equipment equipped
with a 6-pin type i.LINK jack using the i.LINK cable,
power off the equipment and remove the power cord
from the AC outlet before connecting (or
disconnecting) the i.LINK cable. If the i.LINK cable
is connected (or disconnected) while the equipment
power cord is connected to the AC outlet, a high-
voltage current (8 to 40 V) output from the i.LINK
jack of the equipment flows into the unit and damage
it.
About required i.LINK cable
Use a Sony i.LINK cable.
i.LINK and are trademarks of Sony Corporation.
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony hvr m25p bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony hvr m25p in de taal/talen: Engels als bijlage per email.

De handleiding is 0,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info