419871
60
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
60
GB
If you resume playback of a disc when
volume is maximum, there may be no sound.
In this case, turn down the volume, turn off
the system and turn on again.
Sound is interrupted or there is noise.
Check the output audio formats supported
by this system on page 62.
There is no picture or an unclear picture
appears on the TV screen.
Check that the TV is selected correctly.
Set the TV to the appropriate input mode.
Move your audio components away from the
TV.
If a video signal other than those supported
by the system is input, the image may be
distorted.
The source image input to the HDMI jack on the
subwoofer is not output from the TV.
Check the HDMI connection.
Depending on the playback component, you
may need to set up the component. Refer to
the operating instructions of each
component.
Use a High Speed HDMI cable. If you use a
Standard HDMI cable, 1080p images may
not be displayed properly.
Control for HDMI
The Control for HDMI function does not work.
Check the HDMI connection (page 12).
Make sure “CTRL: HDMI” is set to “ON” in
AMP menu.
Make sure the connected component is
compatible with the Control for HDMI
function.
Check the Control for HDMI settings on the
connected component. Refer to the
operating instructions supplied with the
connected component.
If you change the HDMI connection, or
connect/disconnect the AC power cord
(mains lead), or if there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 29).
The system may not work correctly if you
select a component that is not compatible
with the Control for HDMI function on the
TV side.
No sound is output from the system and the
TV’s speaker.
Check the volume of the system and the TV.
Select the input of the system correctly.
The sound is output from both the system and
the TV.
If the Control for HDMI function is set to off,
or the selected component is not compatible
with the Control for HDMI function, turn off
the sound of the system or the TV.
The System Power Off function does not work.
Change the setting of the TV to turn
connected components off automatically
when you turn off the TV. For details, refer
to the operating instructions of the TV.
An image does not appear on the TV.
Check whether HDMI IN and HDMI OUT
are connected correctly.
A message stating that the output method has
changed from the system speaker to the TV
speaker appears on the TV screen.
When the DMPORT function is selected, the
System Audio Control function does not
work (page 32).
When the system is in standby mode, there is
no image or sound on the TV.
When the system is in standby mode, image
and sound are output from the HDMI
component selected the last time you turned
off the system. If you are enjoying other
component, play the component and
perform the One-Touch Play operation, or
turn on the system to select the HDMI
component you want to enjoy.
Make sure “POWER SAVE” is set to “OFF”
in the AMP menu if you connect
components not compatible with the
“BRAVIA” Sync to the system (page 34).
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony ht fs3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony ht fs3 in de taal/talen: Engels als bijlage per email.

De handleiding is 3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sony ht fs3

Sony ht fs3 Gebruiksaanwijzing - Nederlands, Deutsch, Italiano - 220 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info