571898

Sony ZS-RS70BTB Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
ZS-RS70BTB_CED [GB] 4-470-543-13(1)
4-470-543-13(1)
Personal Audio System
Operating Instructions
©2013 Sony Corporation Printed in China
ZS-RS70BTB
*
and VOLUME +
have a tactile dot.
Illumination
The illumination
has the following two
features.
Indication of function change
When switching to one of five functions, the
center of the illumination (white) increases in
intensity to notify the user of a function
change. When switching to the Bluetooth
function, both sides of the illumination are also
lit in blue.
Lighting effects for audio output
Lighting effects (both sides of the illumination
are lit in red) are created that synchronize with
the music source. You can turn this function on
or off as desired (See “To turn off the light sync
function”).
Europe Only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead. By ensuring
these batteries are disposed of correctly, you will
help prevent potentially negative consequences
for the environment and human health which
could otherwise be caused by inappropriate
waste handling of the battery. The recycling of
the materials will help to conserve natural
resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only. To ensure that the battery will be
treated properly, hand over the product at
end-of-life to the applicable collection point for
the recycling of electrical and electronic
equipment.
For all other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
Licence and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product contains technology subject to
certain intellectual property rights of Microsoft.
Use or distribution of this technology outside
of this product is prohibited without the
appropriate license(s) from Microsoft.
The Bluetooth word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Android is a trademark of Google Inc.
Other trademarks and trade names are those
of their respective owners. In this manual, ™
and
®
marks are not specified.
Basic Operations
Before using the unit
To turn the power on or off
Press OPERATE
. You can also turn on the
power of this unit using the direct power-on
function (below).
In this manual, operations are mainly explained
using the direct power-on function.
To use the direct power-on function
Press CD
, USB
, BLUETOOTH
, RADIO
DAB/FM
or AUDIO IN
while the unit is
turned off. The power turns on with the relevant
function selected.
To adjust the volume
Press VOLUME + or
.
The volume level of this unit is adjustable in
steps from 0 to 31. For the 31st step, “VOL MAX” is
displayed.
To listen through headphones
Connect headphones to the (headphones) jack
.
To reinforce the bass
Press MEGA BASS
.
“MEGA BASS” lights up on the display.
To return to normal sound, press the button
again.
To turn off the light sync function
The light sync function creates lighting effects
that synchronize with the music source. By
default, this function is on, but you can turn it off
as desired.
Hold down LIGHT SYNC
until “LIGHT SYNC
OFF” appears on the display.
To turn on the function, hold down the button
again until “LIGHT SYNC ON” appears.
Playing a music disc
You can play the following types of discs with
this unit.
Audio CDs on which CD-DA tracks are recorded
in CD-DA disc format
CD-R/CD-RW discs on which MP3 or WMA
audio files are recorded in ISO9660 Level 1/
Level 2 or Joliet
1 Press CD
to turn on the CD function.
2 Press PUSH OPEN/CLOSE
, and place
a disc in the CD compartment with the
label side up.
Label side up
3 Press PUSH OPEN/CLOSE
to close
the CD compartment.
(Example: when an audio CD is loaded)
Total number of tracks
Total playing time
(Example: when an MP3/WMA disc is loaded)
Total number of folders*
* If MP3/WMA files are present only on the root
directory (“ROOT” folder), “1FLDR” appears on
the display.
4 Press
to start playback.
Track or MP3/WMA file number
Playing time
When you play an MP3/WMA disc, the folder
name*
1
and song title are displayed before the
playing time*
2
appears.
*
1
If there is no folder, “ROOT” appears on the
display.
*
2
If the playing time is longer than 100 minutes,
“--:--” appears on the display.
Other operations
To Do this
Pause playback Press
. To return to
playback, press the button
again.
Stop playback Press
. When you press
after playback is
stopped, playback starts from
the beginning of the track/
file you were last playing
(Resume Play).
Cancel Resume
Play
Press
twice. When you
press
after you cancel
Resume Play, playback starts
from the beginning of the
first track/file.
Select a folder
on an MP3/
WMA disc
Press
(Folder) + or
.
Select a track/
file
Press
or
. You can
skip tracks/files one by one.
Find a point in a
track/file
Hold down
or
during playback, and release
the button at the desired
point. When locating a point
while paused, press
to
start playback after the
desired point is found.
Tip
Resume Play is cancelled if you press
, open
the CD compartment or turn off the unit.
Other operations
To Do this
Pause playback Press
. To return to
playback, press the button
again*.
Stop playback Press
. When you press
after playback is
stopped, playback starts from
the point where you stopped
playback (Resume Play).
Cancel Resume
Play
Press
twice. When you
press
after you cancel
Resume Play, playback starts
from the beginning of the
first file.
Select a folder
Press
(Folder) + or
.
Select a file Press
or
. You can
skip files one by one.
To skip files continuously,
hold down
or
and
release the button at the
desired track/file.
Find a point in
a file
Hold down
or
during playback, and release
the button at the desired
point. When locating a point
while paused, press
to
start playback after the
desired point is found.
Remove a USB
device
Hold down
until “NO
DEV” appears on the display,
and then disconnect the USB
device.
* When playing a VBR MP3/WMA file, playback may
restart from a different point.
Note
When removing a USB device, always hold down
until “NO DEV” appears on the display. Removing
the USB device without performing this step may
corrupt the data on the USB device or damage the
device itself.
To change play modes
Press MODE
repeatedly while the USB device
is stopped.
For details, see “Selecting play mode” on the
back page.
Notes on the USB device
It may take a long time before playback starts
when:
the folder structure is complex.
the USB device is close to capacity.
Do not save non-MP3/WMA files or unnecessary
folders to a USB device that contains MP3/WMA
files.
During playback, folders that contain no MP3/
WMA files are skipped.
The audio formats supported by this unit are as
follows:
MP3: file extension “.mp3”
WMA: file extension “.wma”
Note that even if the file name has the correct file
extension but the actual file was created in a
different audio format, this unit may produce
noise or may malfunction.
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless
and WMA PRO formats cannot be played back.
This unit cannot play audio files on a USB device in
the following cases;
when the total number of audio files in a single
folder exceeds 999.
when the total number of audio files on a single
USB device exceeds 5,000.
when the total number of folders on a single
USB device exceeds 255 (including the “ROOT”
folder).
when the directory level (folder depths) exceeds
8 (including the “ROOT” folder).
These numbers may vary depending on the file
and folder structure.
Compatibility with all encoding/writing software is
not guaranteed. If audio files on the USB device
were originally encoded with incompatible
software, those files may produce noise or
interrupted sound, or may not be played back at
all.
Folder names and file names can be displayed
using up to 32 characters, including quotation
marks.
Characters and symbols that cannot be displayed
by the unit will appear as “_”.
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and
2.4 of the ID3 tag format for MP3 files and the
WMA tag format (defined by ASF (Advanced
Systems Format) specification) for WMA files.
When a file has the ID3 or WMA tag information,
song title, artist name, and album name will be
displayed. If a file does not have the tag
information, the unit displays as follows:
File name instead of the song title.
“NO ARTIST” message instead of the artist
name.
“NO ALBUM” message instead of the album
name.
ID3 and WMA tag information can be displayed up
to 32 characters.
Recording music from a disc
to a USB device
You can record a whole disc (Synchro Recording)
or a currently playing track or file (single track
recording) to a USB device (digital music player
or USB storage media, etc.).
When recording from a CD, the tracks are
recorded as MP3 files at 128 kbps. When
recording from an MP3/WMA disc, MP3/WMA
files are recorded with the same bit rate as the
original MP3/WMA files.
For compatible USB devices, see “Compatible
USB devices” on the back page.
1 Connect the USB device to the
(USB)
port
.
2 Place a disc you want to record in the CD
compartment.
To record a whole disc
Proceed to step 3.
To record MP3/WMA files in a specific
folder
Press (Folder) + or
repeatedly to select
the folder you want.
To record only your favorite tracks/files
Perform steps 1 to 5 of “Creating your own
program (Program Play)” on the back page.
To record a single track/file
Select and start playback of the track/file you
want to record.
3 Press REC CD USB
.
“REC” flashes and the unit starts calculating
the amount of free space on the USB device.
When the calculation is finished,
“FREE***G”/“FREE***M” (remaining storage
space on the device, in gigabytes/megabytes),
and then “PUSH ENT” appears on the display.
If “LOW ***M” appears on the display, there is
insufficient space on the device. To cancel
recording, press
. To continue recording
anyway, proceed to step 4.
4 Press ENTER
.
Recording starts. Do not remove the USB
device while recording.
Playback stops automatically when Synchro
Recording is completed.
Playback continues when recording of a single
track/file is completed.
Other operations
To Do this
Stop recording Press
. An MP3/WMA file
is created up to the point the
recording was stopped.
Remove a USB
device
Press USB
, then hold down
until “NO DEV” appears
on the display, and then
disconnect the USB device.
Example of folder structure and
playing order
The playing order of the folders and files is as
follows:
Folder
MP3/WMA file
Notes on MP3/WMA discs
When a disc is loaded, the unit reads all the files
on that disc. During this time, “READING” is
displayed. If there are many folders or non-MP3/
WMA files on the disc, it may take a long time for
play to begin or for the next MP3/WMA file to
start to play.
We recommend that non-MP3/WMA files or
unnecessary folders are excluded when creating
MP3/WMA discs.
During playback, folders that contain no MP3/
WMA files are skipped.
The audio formats supported by this unit are as
follows:
MP3: File extension “.mp3”
WMA: File extension “.wma”
Note that even if the file name has the correct file
extension but the actual file was created in a
different audio format, this unit may produce
noise or may malfunction.
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless
and WMA PRO formats cannot be played back.
This unit cannot play audio files on a disc in the
following cases:
When the total number of audio files exceeds
511.
When the total number of folders on a single
disc exceeds 511.
When the directory level (folder depths) exceeds
9 (including the “ROOT” folder).
Folder names and file names can be displayed
with up to 32 characters, including quotation
marks.
Characters and symbols that cannot be displayed
by the unit will appear as “_”.
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and
2.4 of the ID3 tag format for MP3 files and the
WMA tag format (defined by ASF (Advanced
Systems Format) specification) for WMA files.
When a file has the ID3 or WMA tag information,
song title, artist name, and album name will be
displayed. If a file does not have the tag
information, the unit displays as follows:
File name instead of the song title.
“NO ARTIST” message instead of the artist
name.
“NO ALBUM” message instead of the album
name.
ID3 and WMA tag information can be displayed up
to 32 characters.
To change play modes
Press MODE
repeatedly while the disc is
stopped.
For details, see “Selecting play mode” on the
back page.
Listening to music on a USB
device
You can listen to audio files stored on a USB
device (a digital music player or USB storage
media).
Audio files in MP3 and WMA formats* can be
played on this unit.
For compatible USB devices, see “Compatible
USB devices” on the back page.
* Files with DRM (Digital Rights Management)
copyright protection or files downloaded from an
online music store cannot be played on this unit. If
you try to play one of these files, the unit plays
the next unprotected audio file.
1 Connect the USB device to the
(USB)
port
.
Note
This unit cannot be used to charge USB devices.
2 Press USB
to turn on the USB function.
The volume label* scrolls once, then the total
folder number appears on the display.
Total folder number
* If the USB device does not have a volume label,
“STORAGE DRIVE” scrolls.
A volume label is a name that you can assign to
data storage media or devices.
3 Press
to start playback.
The folder name and song title are displayed,
and then the file number and playing time
appear.
File number
Playing time*
* If the playing time is longer than 100 minutes,
“--:--” appears on the display.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
The nameplate is located on the bottom exterior.
Notice for customers: the
following information is only
applicable to equipment sold
in countries applying EU
directives
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan. Inquiries
related to product compliance based on
European Union legislation shall be addressed to
the authorized representative, Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters,
please refer to the addresses provided in the
separate service or guarantee documents.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. The
recycling of materials will help to conserve
natural resources. For more detailed information
about recycling of this product, please contact
your local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Power Sources
To erase audio files or folders from the
USB device
1 Select the audio file or folder you want to
erase.
Press
or
to select an audio file.
Press
(Folder) + or
to select a folder.
2 Press ERASE
.
“ERASE?” appears on the display.
3 Press ENTER
.
“TRACK ERASE?” or “FOLDER ERASE?” appears
on the display.
4 Press ENTER
.
The selected audio file or folder is erased, and
“COMPLETE” appears on the display.
Folder and file generation rules
When first recording to a USB device, a “MUSIC”
folder is created directly below the “ROOT.”
Folders and files are generated within any of the
transfer mode-oriented folders as follows.
Synchro Recording*
1
Recording
source
Folder name File name
MP3/WMA Same as the recording source*
2
CD-DA “FLDR001”*
3
“TRACK001”*
4
Single track recording
Recording
source
Folder name File name
MP3/WMA
“REC1”*
5
Same as the
recording
source*
2
CD-DA “TRACK001”*
4
*
1
Recording a whole disc, MP3/WMA files in a
specific folder and only your favorite tracks/files
(Program play)
*
2
A folder name of up to 32 characters can be
assigned.
*
3
Folder names are assigned in sequential order up
to a maximum of 255 (including the “ROOT” and
“MUSIC” folders).
*
4
File names are assigned in sequential order.
*
5
A new file is recorded to the “REC1” folder each
time single track recording is performed.
Notes
If you start recording in shuffle play or repeat play
mode, the selected play mode is automatically
changed to normal play.
Do not remove the USB device during recording or
erase operations. Doing so may corrupt the data
on the device or damage the device itself.
While recording from an MP3/WMA disc, no sound
is output and “HI-SPEED” appears on the display.
CD-TEXT information is not transferred in the
created MP3 files.
Recording stops automatically if:
the USB device runs out of space during
recording.
the number of audio files and folders on the
USB device reaches the limit that the unit can
recognize.
the function is changed.
If a folder or file that you are trying to record has
the same name as folder or file already existing on
the USB device, a sequential number is added
after the name without overwriting the original
folder or file.
You cannot erase MP3/WMA folders during
playback or pause.
Non-MP3/WMA format files or sub folders in the
folder to be erased are not erased.
Radio sound cannot be recorded to a USB device.
Note on copyright-protected content
The recorded music is limited to private use only.
Use of the music beyond this limit requires
permission from the copyright holders.
Making a wireless connection
with Bluetooth devices
You can enjoy music wirelessly via the Bluetooth
function built in to your devices.
Choose one of the following three connection
methods best suited for the Bluetooth device.
For details on how to operate your device, refer
to the operating instructions supplied with the
device.
Pairing with a Bluetooth device:
see
Pattern A
Bluetooth devices need to be “paired” with each
other beforehand.
Connecting with a paired device:
see
Pattern B
To listen to music with a Bluetooth device that
has been paired, see this pattern.
One touch connection with a smartphone
(NFC):
see
Pattern C
Using an NFC-compatible smartphone, you can
establish a Bluetooth connection by just
touching the unit with it.
Check the following before operating the unit.
Both the unit and the device are placed within
1 m of each other.
The unit is connected to the AC power cord, or
the OPR/BATT indicator is lit.
The operating instructions supplied with the
device are at hand.
Pattern A
Pairing and connecting with a
Bluetooth device
1
Press BLUETOOTH
to turn on the
Bluetooth function.
2 Turn on the Bluetooth function of the
Bluetooth device.
For details, refer to the operating instructions
supplied with the device.
If no devices have been paired, such as when
you press BLUETOOTH
for the first time
after you purchase the unit, the unit
automatically enters pairing mode, and the
Bluetooth indicator (
) and “PAIRING” on the
display flash. In this case, proceed to step 4.
3 Hold down BLUETOOTH-PAIRING
until
two beeps are heard.
The unit enters pairing mode, and the
Bluetooth indicator
( ) and “PAIRING” on the
display flash.
4 Perform the pairing procedure on the
Bluetooth device to detect the unit.
5 Select “SONY:ZS-RS70BT/BTB” shown on
the display of the Bluetooth device.
If “SONY:ZS-RS70BT/BTB” does not appear on
the device’s display, repeat from step 2.
Note
Some devices cannot display a list of detected
devices.
6 If Passcode* input is required on the
display of the Bluetooth device, input
“0000.”
The Bluetooth connection is established.
“BTAUDIO” appears on the display.
* “Passcode” may be referred to as “Passkey,”
“PIN code,” “PIN number,” or “Password.”
Tip
To pair with other Bluetooth devices, repeat steps 2
to 6 for each device.
Notes
Pairing mode of the unit is cancelled after about
5minutes, and the Bluetooth indicator ( ) flashes.
If pairing mode is cancelled while performing this
procedure, start over from step 3.
The passcode of the unit is fixed as “0000.” The
unit cannot be paired with a Bluetooth device
whose Passcode is not “0000.”
Once Bluetooth devices are paired, there is no
need to pair those devices again. However, in the
following case, you will need to perform the
pairing procedure again.
The unit is paired with 10 or more devices.
The unit can be paired with up to 9 Bluetooth
devices. If a new device is paired after 9 devices
have been paired, the device whose latest
connection time is the oldest among the 9
paired devices is replaced with the new one.
More than one device can be paired with the unit,
but sound will be heard from just one of those
devices.
Connect the AC power cord
, or insert six R14 (size C) batteries (not supplied) into the battery
compartment
.
To AC IN
To a wall outlet
AC power cord
(supplied)
Notes
Replace the batteries when the OPR/BATT indicator
dims, or when the unit becomes inoperable. Replace all
of the batteries with new ones. Before you replace the batteries, be sure to remove any CD and disconnect any
USB devices or optional components from the unit.
To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
To use the power-management function
This unit is equipped with an automatic standby function. With this function, the unit enters standby
mode automatically after about 15 minutes if there is no operation or audio signal output.
To turn standby mode on or off, press DISPLAY
while holding down
. Each time you press the
buttons, “AUTO STANDBY ON” or “AUTO STANDBY OFF” appears on the display.
Notes
The displayed content starts flashing on the display about 2 minutes before entering standby mode.
In standby mode with the AC power cord connected, “STANDBY” appears on the display.
The automatic standby function is not available with the FM function.
Pattern B
Connecting with a paired Bluetooth
device
1
Press BLUETOOTH
to turn on the
Bluetooth function.
2 Turn on the Bluetooth function of the
Bluetooth device.
Tip
In the case of the last-connected Bluetooth
device, the unit tries to re-establish a Bluetooth
connection with it if the device’s Bluetooth
function is on. When a Bluetooth connection is
established, the Bluetooth indicator (
) on the
display stays on.
3 Select “SONY:ZS-RS70BT/BTB” shown in
the display of the Bluetooth device.
If necessary, select Bluetooth profile “A2DP,”
which the unit supports. For details on the
profile, see “What is Bluetooth Wireless
Technology?”
The Bluetooth connection is established and
“BTAUDIO” appears on the display.
Notes
This step may not be necessary for some
devices.
If the unit cannot connect to the Bluetooth
device, delete “SONY:ZS-RS70BT/BTB” from the
Bluetooth device, then perform pairing again.
Bluetooth standby mode
Bluetooth standby mode makes the unit turn on
and switch to the Bluetooth function
automatically when you try to make a Bluetooth
connection with a Bluetooth device (only when
the AC power cord is connected).
Hold down OPERATE
until “BT STANDBY ON”
appears on the display. The unit is turned off and
enters Bluetooth standby mode.
To cancel the mode, repeat the procedure until
“BT STANDBY OFF” appears. The unit is turned off
and enters standby mode.
Pattern C
Connecting with a smartphone by
One touch (NFC)
By just touching the unit with an NFC-compatible
smartphone, the unit is turned on and switched
to the Bluetooth function automatically and then
paired and connected to the smartphone.
Compatible smartphones
Smartphones with the NFC function built-in
(OS: Android 2.3.3 or later, excluding Android 3.x)
About NFC
NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones
and IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated
location on NFC compatible devices.
1 Turn on the NFC function of the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
If your smartphone OS is Android 2.3.3
or later, but earlier than Android 4.1
Proceed to step 2.
If your smartphone OS is Android 4.1
or later
Proceed to step 4.
2 Download and install the app “NFC Easy
Connect” on the smartphone.
“NFC Easy Connect” is an original app by Sony
for Android phones, and is available at the
Google Play Store.
Search for “NFC Easy Connect” or scan the
following two-dimensional code to download
and install the free app. Communication fees
are required to download the app.
The App may not be available in some
countries and/or regions.
Tip
For some smartphones, One-touch connection
may be available without downloading the app
“NFC Easy Connect.” In that case, the operation
and specifications may be different from the
description here. For details, refer to the
operating instructions supplied with the
smartphone.
For the two-dimensional code:
Use a two-dimensional code reader app.
3 Start the app “NFC Easy Connect” on the
smartphone.
Make sure that the application screen is
displayed.
4 Touch the unit with the smartphone.
Keep touching the smartphone to the N mark
on the unit until the smartphone responds.
Note
If your smartphone screen is locked, the
smartphone will not function. Release the lock,
then touch the smartphone to the N mark
again.
Smartphone responds
(unit recognized)
Follow the on-screen instructions to establish
the connection.
When the Bluetooth connection is established,
“BTAUDIO” appears on the display.
Tips
If it is difficult to establish the connection, try
the following.
Activate the app “NFC Easy Connect” and
move the smartphone slightly across the N
mark on the unit.
If the smartphone is in a case, remove it.
Touch the unit with the smartphone again to
disconnect.
If you have multiple NFC-compatible devices,
just touch the smartphone to a different device
to switch the connection to that device. For
example, when your smartphone is connected
with NFC-compatible headphones, just touch
the smartphone to the unit to change the
Bluetooth connection to the unit (One-touch
connection switching).
Listening to music on a
Bluetooth device wirelessly
Operations may vary depending on the
Bluetooth device. Refer also to the operating
instructions supplied with your Bluetooth device.
1 Make the Bluetooth connection between
the unit and the device.
For details on the Bluetooth connection
procedure, see “Making a wireless connection
with Bluetooth devices.” When the Bluetooth
connection is established, the Bluetooth
indicator (
) on the display stays on.
2 Start playback on the Bluetooth device,
then adjust the volume.
Set the volume of the Bluetooth device to a
moderate level, and press VOLUME or +
on the unit.
After use
Do any of the following.
Turn off the Bluetooth function of the
Bluetooth device. For details, refer to the
operating instructions supplied with the
device.
Turn off the Bluetooth device.
Change the function of the unit.
Turn off the unit.
Touch the unit with the smartphone again to
disconnect (NFC-compatible smartphones
only).
To clear the paired device information
stored in the unit
1 Press BLUETOOTH
to turn on the
Bluetooth function.
2 Hold down ERASE
until “BT RESET”
appears on the display.
3 Press ENTER
to reset and clear the
paired device information.
When the paired device information is cleared,
“COMPLETE” appears on the display.
To cancel the reset operation, press
before pressing ENTER
.
Listening to the radio
1 Press RADIO DAB/FM
repeatedly to
select the band “DAB” or “FM.”
Reception of DAB/DAB+ radio
station
When you press RADIO DAB/FM
for the
first time after you purchase the unit, DAB
auto tune starts automatically and creates
a list of available services. During DAB auto
tune, the progress indicator flashes on the
display. Do not press any buttons during
DAB auto tune. Scanning will be
interrupted and the service list may not be
created properly.
2 Perform tuning.
For tuning to a DAB/DAB+ station
Press TUNE + or
repeatedly to tune to the
desired station.
“SC” flashes on the display when the selected
primary station has a secondary service. Press
TUNE + or
to tune to the secondary
service. “SC” lights up when a secondary
service is received.
For tuning to an FM station
Hold down TUNE + or
until the frequency
digits begin to change on the display.
The unit automatically scans the radio
frequencies and stops when it finds a clear
station.
If you cannot tune to a station using
automatic tuning mode, press TUNE + or
repeatedly to change the frequency step by
step.
When an FM stereo broadcast is received, “ST”
lights up on the display.
Notes on DAB/DAB+ stations
When tuning to a DAB/DAB+ station, it may take a
few seconds before you hear any sound.
Primary service is automatically received when
secondary service ends.
This tuner does not support data services.
If the stereo FM reception is noisy
Press MODE
repeatedly until “MONO” appears
on the display.
You will lose the stereo effect, but the broadcast
will improve.
To make low sounds clear for DAB/DAB+
reception
The DRC (Dynamic range control) function makes
low sounds clear even when you turn the volume
down.
Check that the DAB/DAB+ station you are
listening to conforms to DRC.
1 Hold down MODE
until “DRC” appears
on the display.
2 Press TUNE + or
to select “2,” “1”
(default setting) or “0.5.”
To turn the DRC function off, select “0.”
3 Press ENTER
.
To run the DAB auto tune manually
If you have moved to another area, perform the
DAB auto tune manually and re-register the
contents of broadcasts.
Hold down RADIO DAB/FM-SCAN until
“INITIAL” and “SCAN?” appears alternately on the
display.
Scanning begins. Depending on the DAB/DAB+
services available in your area, scanning may
take a few minutes.
Progress indicator
When scanning is complete, a list of available
services is created.
Notes
If your country or region does not support DAB/
DAB+ broadcasts, “NOSIGNAL” appears on the
display.
The currently stored list of available services will
be cleared once the DAB auto tune process has
started.
To improve radio reception
Reorient the antenna to improve reception.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sony-ZS-RS70BTB

Zoeken resetten

  • Ik kan de scan niet vinden (veel zenders inmiddels off air Gesteld op 23-11-2022 om 16:55

    Reageer op deze vraag Misbruik melden

  • Als ik het apparaat aan zet of de spanning er op doe, gaat hij gelijk in de stand by. Ik krijg hem hier niet meer van af. Is dit nog te verhelpen of kan ik hem weg doen?
    Mijn e-mail adres is f.eisink@upcmail.nl Gesteld op 1-11-2021 om 15:19

    Reageer op deze vraag Misbruik melden

  • Kan je gratis helpen aan een vertaald Nederlands exemplaar, stuur je mail naar: johnnyhyves@gmail.com Gesteld op 30-3-2016 om 13:11

    Reageer op deze vraag Misbruik melden

    • Als je de handleiding naar info@gebruikershandleiding.com komt de handleiding hier als download erbij. Alvast dank! Geantwoord op 30-3-2016 om 14:01

      Waardeer dit antwoord Misbruik melden

  • Graag een fatsoenlijke handleiding in het Nederlands!!
    Gesteld op 23-11-2015 om 14:19

    Reageer op deze vraag Misbruik melden

    • Beste , ga naar Van den Borre ,en vraag of ze een uitdruk willen maken van de nederlandse handleiding ,zeg dat je een toestel gekocht heeft bij hun ,en geen nederlandse handleiding bij is .en ze drukken er een uit vooru
      dat is de oplossing Geantwoord op 23-11-2015 om 19:21

      Waardeer dit antwoord (1) Misbruik melden

  • Even een mail naar mij en ik zend de gebruiksaanwijzing van (van den Borre)

    Sony ZS-RS70BTB

    eppie46@home.nl Geantwoord op 24-11-2015 om 12:42

    Waardeer dit antwoord (4) Misbruik melden

  • Inderdaad geen ned handleiding en als je dan belt zeggen ze ja dat klopt. We mailen wel wat gegevens door Geantwoord op 27-1-2016 om 17:01

    Waardeer dit antwoord Misbruik melden

  • Beste , ga naar Van den Borre ,en vraag of ze een uitdruk willen maken van de nederlandse handleiding ,zeg dat je een toestel gekocht heeft bij hun ,en geen nederlandse handleiding bij is .en ze drukken er een uit vooru
    dat is de oplossing Geantwoord op 27-1-2016 om 17:05

    Waardeer dit antwoord Misbruik melden

  • deze handleiding is NIET beschikbaar in het Nederlands, ook niet bij Sony Geantwoord op 31-1-2016 om 13:59

    Waardeer dit antwoord Misbruik melden

  • Graag de Nederlandse handleiding van de Sony ZS-RS70BTB. lozwen@kpnmail.nl Gesteld op 2-10-2015 om 20:59

    Reageer op deze vraag Misbruik melden

    • Beste , ga naar Vanden Borre , en zeg dat je het toestel bij hun gekocht heeft , ze drukken u een Nederlandstalige versie uit voor u
      groetjes Geantwoord op 2-10-2015 om 23:00

      Waardeer dit antwoord (1) Misbruik melden

  • waarom wordt deze er niet bij geleverd? Expert kan het ook niet vinden.. slechte zaak voor Sony
    Geantwoord op 23-11-2015 om 14:34

    Waardeer dit antwoord (1) Misbruik melden

  • Ik zou graag de handleiding van de Sony ZS-RS70BTB in het Nederlands hebben. Kan iemand mij daaraan helpen? Gesteld op 2-10-2015 om 20:42

    Reageer op deze vraag Misbruik melden
6

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony ZS-RS70BTB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony ZS-RS70BTB in de taal/talen: Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sony ZS-RS70BTB

Sony ZS-RS70BTB Gebruiksaanwijzing - Nederlands - 2 pagina's

Sony ZS-RS70BTB Gebruiksaanwijzing - Deutsch - 2 pagina's

Sony ZS-RS70BTB Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info