699399

Sony SA-Z9R Handleiding

1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
SA-Z9R
Rear Speaker
Operating Instructions
4-727-591-33(1)
©2018 Sony Corporation Printed in Malaysia
Troubleshooting
If you experience any of the following difficulties
while using the rear speakers, use this
troubleshooting guide to help remedy the problem
before requesting repairs. Should any problem
persist, consult your nearest Sony dealer.
Be sure to bring all of your rear speakers and Sound
Bar (HT-Z9F/HT-ZF9) (main unit and subwoofer) (not
supplied) even if it seems as though only one has a
problem, when you request to repair.
No sound is heard from the rear speakers.
Make sure the AC power cord (mains lead) of the
rear speaker is connected properly.
If the power indicator on the rear speaker does not
light, try the following.
– Make sure the AC power cord (mains lead) of the
rear speaker is connected properly.
– Press (power) of the rear speaker to turn on
the power.
If the power indicator on the rear speaker flashes
slowly in green or lights in red, try the following.
– Move the rear speaker to a location near the
main unit of the Sound Bar (HT-Z9F/HT-ZF9) so
that the power indicator on the rear speaker
lights in green.
– Connect the rear speaker to the Sound Bar
(HT-Z9F/HT-ZF9) manually. For details, refer to
the Operating Instructions supplied with the
Sound Bar (HT-Z9F/HT-ZF9).
– Check the wireless connection status. For details,
refer to the Operating Instructions supplied with
the Sound Bar (HT-Z9F/HT-ZF9).
Press REAR + on the remote control of the
Sound Bar (HT-Z9F/HT-ZF9) to increase the volume
of the rear speakers.
If you change the [RF Channel] setting of the
Sound Bar (HT-Z9F/HT-ZF9) from [Off] to [On], it
may take 1 minute for the sound to be output. For
details, refer to the Operating Instructions supplied
with the Sound Bar (HT-Z9F/HT-ZF9).
Sound skips or has noise.
If there is a device nearby that generates
electromagnetic waves, such as a wireless LAN or
a microwave oven in use, locate the rear speakers
and the Sound Bar (HT-Z9F/HT-ZF9) apart from
that device.
If there is an obstacle between the main unit of
the Sound Bar (HT-Z9F/HT-ZF9) and the rear
speakers, move or remove the obstacle.
Locate the main unit of the Sound Bar (HT-Z9F/
HT-ZF9) and the rear speakers as close as possible.
Switch the network connection of the TV or Blu-ray
Disc player from wireless to wired.
Specifications
Amplifier section
POWER OUTPUT (rated)
30 W + 30 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
50 W (per channel at 4 ohms, 1 kHz)
Speaker system
Full range speaker system, Acoustic suspension
Speaker
46 mm cone type, Full range speaker
Power requirements
220 V - 240 V AC, 50 Hz/60 Hz
Power consumption
On: 11 W
Standby mode: 1 W or less
Turned off: 0.5 W or less
Dimensions (w/h/d) (approx.)
100 mm × 155 mm × 100 mm (projecting parts not
included)
Mass (approx.)
1.0 kg
Wireless transmitter/receiver section
Communication system
Wireless Sound Specification Version 4.0
Frequency band
5 GHz
Modulation method
OFDM
Radio Frequency Bands and Maximum Output
Power
Frequency band Maximum output power
5150 - 5250 MHz < 18 dBm
5250 - 5350 MHz < 18 dBm
5470 - 5600 MHz < 18 dBm
5650 - 5725 MHz < 18 dBm
5725 - 5850 MHz < 13.98 dBm
Included items
• Rear speaker R (1), Rear speaker L (1)
• Operating Instructions (1)
On copyrights
This product contains software that is subject to the
GNU General Public License (“GPL”) or GNU Lesser
General Public License (“LGPL”). These establish that
customers have the right to acquire, modify, and
redistribute the source code of said software in
accordance with the terms of the GPL or the LGPL.
For details of the GPL, LGPL and other software
licenses, please refer to [Software License
Information] under
[Setup] - [Advanced Settings]
- [System Settings] on the product.
The source code for the software used in this product
is subject to the GPL and LGPL, and is available on
the Web. To download, please access the following:
URL:
http://oss.sony.net/Products/Linux
Please note that Sony cannot answer or respond to
any inquiries regarding the content of this source
code.
All other trademarks are trademarks of their
respective owners.
WARNING
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the ventilation
opening of the appliance with newspapers,
tablecloths, curtains, etc.
Do not expose the appliance to naked flame sources
(for example, lighted candles).
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing, and
do not place objects filled with liquids, such as vases,
on the appliance.
The unit is not disconnected from the mains as long
as it is connected to the AC outlet, even if the unit
itself has been turned off.
As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible AC
outlet.
Should you notice an abnormality in the unit,
disconnect the main plug from the AC outlet
immediately.
Indoor use only.
For the customers in Europe
Notice for customers: the following information is
only applicable to equipment sold in countries
applying EU directives.
This product has been manufactured by or on behalf
of Sony Corporation.
EU Importer: Sony Europe Limited.
Inquiries to the EU Importer or related to product
compliance in Europe should be sent to the
manufacturer’s authorized representative, Sony
Belgium, bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium.
Hereby, Sony Corporation declares that this
equipment is in compliance with Directive 2014/53/
EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://www.compliance.sony.de/
For this radio equipment, the following restrictions
on putting into service or of requirements for
authorisation of use apply in BE, BG, CZ, DK, DE, EE,
IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL,
PT, RO, SI, SK, FI, SE, UK, IS, LI, NO, CH, AL, BA, MK, MD,
RS, ME, XK, TR:
5150 - 5350 MHz band is restricted to indoor
operations only.
This radio equipment is intended to be used with the
approved version(s) of software that are indicated in
the EU Declaration of Conformity. The software
loaded on this radio equipment is verified to comply
with the essential requirements of the Directive
2014/53/EU.
The software version can be found via: Refer to
[System Information] under [Setup] - [Advanced
Settings] - [System Settings].
Disposal of old electrical &
electronic equipment
(applicable in the European
Union and other countries
with separate collection
systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring that
this product is disposed of correctly, you will help to
prevent potential negative consequences for the
environment and human health, which could be
caused by inappropriate waste handling of this
product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased
the product.
For the customers in Australia or New
Zealand
It should be installed and operated with at least
20cm and more between the radiator and person’s
body (excluding extremities: hands, wrists, feet and
ankles).
For the customers in Australia and India
Disposal of old electrical &
electronic equipment
(applicable in the European
Union and other countries
with separate collection
systems)
What You Can Do with the Rear Speakers
The following are available when the
rear speakers are used with the Sound
Bar (HT-Z9F/HT-ZF9) (not supplied).
• You can enjoy the surround sound
that makes you feel as if you were
actually listening to a live
performance.
• You can update the software of the
rear speakers. For details, refer to the
Operating Instructions supplied with
the Sound Bar (HT-Z9F/HT-ZF9).
Note
• The rear speakers are designed
exclusively for use with the Sound Bar
(HT-Z9F/HT-ZF9) and cannot be used
with other devices.
• Install the rear speakers vertically.
Parts and Controls
Power indicator
Indicator status (color) Rear speaker status
Flashes slowly (green) The rear speaker is not connected to the
Sound Bar (HT-Z9F/HT-ZF9).
Lights up (green) The rear speaker is connected to the
Sound Bar (HT-Z9F/HT-ZF9).
Flashes twice repeatedly
(green)
The rear speaker is attempting to
connect to the Sound Bar (HT-Z9F/
HT-ZF9).
Flashes/lights up (orange) The software is updating.
Lights up (red) The rear speaker is in standby mode.
Turns off The rear speaker is turned off.
Power indicator
 (power) button
LINK button
Wall mount hole
Mounting hole for the general speaker stand
Connection
1 Connect the AC power cord (mains lead).
The rear speaker is turned on and connected to the Sound Bar
(HT-Z9F/HT-ZF9) wirelessly.
2 Make sure that the power indicator on the rear speaker lights in
green.
When the power indicator lights in green, the connection of the rear
speaker and the Sound Bar (HT-Z9F/HT-ZF9) is established.
If the connection is not established, connect the rear speaker to the
Sound Bar (HT-Z9F/HT-ZF9) manually. For details, refer to the
Operating Instructions supplied with the Sound Bar (HT-Z9F/HT-ZF9).
3 Install the rear speaker by considering the right/left of the rear speaker.
Check the label on the rear of the rear speaker. “REAR R” is for the right, “REAR L” is for the left.
Mounting the Rear Speaker on a Wall
You can mount the rear speakers on a wall.
Rear speakers
Note
• Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is
especially fragile, attach the screws securely in the wall beam. Install the speakers horizontally, hung by
screws in studs in a continuous flat section of the wall.
• Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during
the installation.
• Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall
strength, improper screw installation or natural disaster, etc.
1 Prepare a screw (not supplied) that is suitable for the wall mount
hole on the rear of the rear speaker.
4 mm
More than 30 mm
Hole on the rear of the rear speaker
5.0 mm
10 mm
2 Fasten the screw in the wall.
Approx.
9.5 mm
3 Hang the rear speaker by confirming the right/left of the rear
speaker.
Check the label on the rear of the rear speaker. “REAR R” is for the
right, “REAR L” is for the left.

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony SA-Z9R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony SA-Z9R in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sony SA-Z9R

Sony SA-Z9R Gebruiksaanwijzing - Nederlands, Deutsch - 2 pagina's

Sony SA-Z9R Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info