Handleiding Sony MDR-RF800RK (pagina 1 van 1) (Engels)

752253

Verklein

Vergroot

Pagina terug

1/1

Pagina verder

Wireless Stereo

Headphone System

MDR-RF800RK

Operating Instructions

2-684-424-11(1)

WARNING

To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or

moisture.

To reduce the risk of fire or electric shock, do not place

objects filled with liquids, such as vases, on the

apparatus.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Connect AC power adaptor to an easily accessible AC

outlet. Should you notice an abnormality in AC power

adaptor, disconnect it from the AC outlet

immediately.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

Hereby, Sony Corp., declares that this equipment is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

For details, please access the following URL :

http://www.compliance.sony.de/

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about

recycling of this product, please contact your local

Civic Office, your household waste disposal service or

the shop where you purchased the product.

Welcome!

Thank you for purchasing the Sony MDR-RF800RK

Wireless Stereo Headphone System. Before operating

the unit, please read this manual thoroughly and

retain it for future reference.

Some features are:

•Wireless system that allows you to listen to a

program free from the restriction of a cord

•High fidelity sound reproduction

•10 hours of continuous use with supplied

rechargeable battery.

•Easy connection with TV and HiFi Audio system

equipment

•Up to 100 meters reception range

•Volume control function on the headphones.

Notes on receiving

performance

This system utilizes very high frequency signals in the

800 MHz band so the receiving performance may

deteriorate due to the surroundings. The following

examples illustrate conditions that may reduce the

reception range or cause interference.

•Inside a building with walls containing steel beams.

• An area with many steel file cabinets, etc.

•An area with many electrical appliances capable of

generating electromagnetic fields.

• The transmitter is placed on a metal instrument.

•An area facing a roadway.

•Noise or interfering signals exist in the surroundings

due to radio transceivers in trucks, etc.

•Noise or interfering signals exist in the surroundings

owing to wireless communication systems installed

along roadways.

N Getting started

Unpacking

Check that you have the following items:

•The headphones (1)

•The transmitter (1)

Note

If the antenna cover come off from the transmitter,

put the cover back into the transmitter.

•AC power adaptor (1)

• Unimatch plug cord (1) (stereo mini jack y phono

plugs)

• Connecting cord (1) (stereo mini plug y stereo

mini plug)

• Rechargeable nickel-metal hydride batteries (2)

Charging the supplied

rechargeable batteries

The supplied rechargeable nickel-metal hydride

batteries are not charged from the first time you use

them. Charge them before use.

To charge the batteries, connect the CHARGE plug of

the transmitter to the headphones.

1Remove the battery compartment lid on the

left housing of the headphones.

There are tactile dots on the upper side of the lid

and the housing to check the position of the lid.

Press and turn the lid counter-clockwise with

your palm so that the dot on the lid aligns with

the left side dot of the housing.

Incline the headphones to drop the cover off the

housing.

2Insert the supplied rechargeable nickel-

metal hydride batteries into the battery

compartment, matching the 3 terminals on

the batteries to the 3 marks in the

compartment.

Do not use rechargeable batteries other than the

supplied ones.

3Close the battery compartment lid.

Press and turn the lid clockwise with your palm

so that the tactile dot on the lid matches to right

side dot of the housing.

4Connect the supplied AC power adaptor to

the transmitter.

5Make sure to set the switch located on the

left housing to OFF/CHG. After that, connect

the CHARGE plug of the transmitter to jack

located on the left housing.

POWER indicator located on the transmitter lights

up red. Charging will take about 16 hours, after

which the charging indicator will go off.

When the transmitter’s POWER indicator

does not light up red

Check if the switch on the left housing of the

headphones is set to OFF/CHG. If the switch is set to

ON, the POWER indicator does not light up.

To recharge the headphone batteries after

use

Connect the headphones to the CHARGE plug of the

transmitter in the same manner as described in step 5

of “Charging the supplied rechargeable batteries”

after use. Since the built-in timer recognizes when

charging is complete, there is no need to remove the

headphones from the transmitter after charging.

Notes

•Do not connect the CHARGE plug to anything other

than these headphones.

•The transmitter automatically stops sending RF

signals while charging the batteries.

• This system is designed to charge only the supplied

rechargeable batteries type BP-HP550 for safety.

Note that other types of rechargeable batteries

cannot be charged with this system.

•If dry batteries are installed, they cannot be charged.

•Do not attempt to use the supplied BP-HP550

rechargeable batteries for other components. They

are for use with this system only.

•Charge in an environmental temperature of

between 0 °C and 40 °C (between 32 °F and 104 °F).

Charging and usage hours

Approx. charging hours Approx. usage time*1

1 hour 30 minutes*3

16 hours*210 hours*3

*1at 1 kHz, 1 mW+1 mW output

*2hours required to fully charge empty batteries

*3Time stated above may vary, depending on the

temperature or conditions of use.

Using the headphones with dry batteries

(sold separately)

Commercially available (size AAA) dry batteries can

also be used to power the headphones. Install the

batteries in the same manner as described in steps 1

through 3 of “Charging the supplied rechargeable

batteries.”

When dry batteries are installed, the battery charge

function will not be activated.

Battery life

Battery Approx. hours*1

Sony alkaline battery

LR03/AM-4(N) 28 hours*2

*1 at 1 kHz, 1 mW+1 mW output

*2 Time stated above may vary, depending on the

temperature or conditions of use.

Notes on Batteries

•Do not charge a dry battery.

•Do not carry a dry battery together with coins or

other metallic objects. It can generate heat if the

positive and negative terminals of the battery

accidentally come into contact with metallic objects.

• If you are not going to use the unit for a long time,

remove the batteries to avoid damage from battery

leakage or corrosion.

Checking the remaining battery power

Turn ON the switch located on the left housing of the

headphone, and check the POWER indicator located

on the left housing. The batteries are still serviceable

when the indicator lights up red.

Charge the rechargeable batteries or install new dry

batteries if the POWER indicator light dims, flashes, or

the sound becomes distorted or noisy.

Note

The rechargeable nickel-metal hydride batteries

should be replaced with new ones when they last only

half the expected time after a proper recharging. The

rechargeable batteries type BP-HP550 are not

commercially available. You can order the batteries

from the store where you purchased this system, or at

your nearest Sony dealer.

Setting up the transmitter

1Connect the transmitter to audio/video

equipment.

Select one of the hookups below depending on the

jack type:

*“WALKMAN” and “WALKMAN” logo are

registered trademarks of Sony Coporation.

2Connect the supplied AC power adaptor to

the transmitter.

Notes

•Use only the supplied AC power adaptor. Do not

use any other AC power adaptor.

•When the transmitter is placed on or near a TV, it

may pick up a noise. In such a case, place the

transmitter away from the TV.

•If the connected equipment has the AVLS

(Automatic Volume Limiter System) function, be

sure to turn the function off when using the

transmitter. Otherwise, you will have to turn up the

volume of the headphones, and that may cause

noise.

N Operating the system

Listening to a programme

Before listening

To reduce the risk of hearing damage, first lower the

volume.

1Turn on the audio/video equipment

connected to the transmitter.

If the transmitter is connected to the headphone

jack, set the volume control of the audio source

equipment as high as possible but not so high that

the audio signal becomes distorted.

2Disconnect the CHARGE plug from the

headphones.

The transmitter’s power indicator lights up green.

3Select the radio frequency with the

CHANNEL selector switch.

CHANNEL

1 2

Polarity of the plug

4Turn on the switch on the left housing of

the headphones.

Check if the power indicator on the left housing

lights up red. Place the right housing (R) on your

right ear and the left housing (L) on your left ear.

POWER

CHG

OFF ON

5Select the channel to that of the transmitter

with the switch on the right housing of the

headphones.

Turn up the volume to a moderate level with the

VOLUME control on the left housing.

1CH 2CH

VOLUME

Sending RF signals from the transmitter

The transmitter starts sending RF signals

automatically when it detects an audio signal from the

connected equipment.

If it does not detect an audio signal for more than

about 4 minutes, the transmitter will stop sending RF

signals, and the POWER indicator will turn off.

When the transmitter receives an audio signal again, it

starts sending the RF signals, and the POWER

indicator will light up green again.

If the audio signal is very weak, the transmitter does

not send RF signals. If the transmitter is connected to a

headphone jack, make sure the volume of the

equipment connected is set to 5 - 6 or higher.

You may not hear the beginning of the sound from the

headphones until the transmitter starts sending the RF

signals after detecting an audio signal.

Notes

•If hiss is heard, move closer to the transmitter.

•You may hear some noise when you disconnect the

AC power adaptor from the transmitter before turn

off the headphones.

The effective areas of

the transmitter

The optimum distance is up to approximately 100 m

without the system picking up some interference.

However, the distance may vary depending on the

surroundings and environment. If the system picks up

some noise within the above mentioned distance,

reduce the distance between the transmitter unit and

the headphones, or select another channel.

Notes

•When you use the headphones inside the effective

areas of the transmitter, the transmitter can be

placed in any direction from the listener.

•Even within the signal reception area, there are some

spots (dead spots) where the RF signal cannot be

received. This characteristics is inherent to RF

signals, and does not indicate malfunction. By

slightly moving the transmitter, location of the dead

spot can be changed.

Replacing the ear pads

The ear pads are replaceable. If the ear pads become

dirty or worn out, replace them as illustrated below.

The ear pad is not commercially available. You can

order replacements from the store where you

purchased this system, or at your nearest Sony dealer.

1Remove the old ear pad by pulling it out of

the groove on the housing.

2Place the new ear pad on the driver unit.

Hang the edge of the ear pad on one side of the

driver unit’s groove edge, then turn the edge of

ear pad around the driver unit as illustrated

below.

When the ear pad is securely inserted into the

groove, adjust the ear pad to the vertical position.

CHG

Transmitter

Headphones

CHARGE plug

N Additional information

Precautions

•If the transmitter is not to be used for a long period

of time, disconnect the AC power adaptor from the

AC outlet by holding the plug. Do not pull on the

cord.

•Do not leave the wireless stereo headphone system

in a location subject to direct sunlight, heat or

moisture.

Notes on headphones

To reduce the risk of hearing damage

Avoid using headphones at high volume. Hearing

experts advise against continuous, loud and extended

play. If you experience a ringing in your ears, reduce

the volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow

you to hear outside sounds and to be considerate to

the people around you.

If you have any questions or problems concerning the

system that are not covered in this manual, please

consult your nearest Sony dealer.

Be sure to bring the headphones and the transmitter to

the Sony dealer when requiring repair work.

Troubleshooting

No sound/Muffled sound

,Check the connection of the audio/video

equipment or the AC power adaptor.

,Check that the audio/video equipment is

turned on.

,Turn up the volume on the connected audio/

video equipment, if the transmitter is

connected to the headphones jack.

,Change the radio frequency with the

CHANNEL selector on the transmitter, then

select the same radio frequency with the switch

on the right housing of the headphones.

,The mute function is activated.

•Use the headphones near the transmitter.

,The headphones’ POWER indicator light turns

off, dims, flashes, or sound becomes distorted

or noisy.

•Charge the rechargeable battery if it is weak,

or replace alkaline batteries with new ones. If

the POWER indicator is still off after charging

the battery, take the headphones to a Sony

dealer.

Distortion

,If the transmitter is connected to the headphone

jack, turn down the volume on the connected

audio/video equipment.

,Change the radio frequency with the

CHANNEL selector on the transmitter and the

switch on the right housing of the headphones.

,The headphones’ POWER indicator light turns

off, dims, flashes, or sound becomes distorted

or noisy.

• Charge the rechargeable batteries if it is weak,

or replace alkaline batteries with new ones. If

the POWER indicator is still off after charging

the battery, take the headphones to a Sony

dealer.

Loud background noise

,Move closer to the transmitter. As you move

away from the transmitter, more noise is likely

to be heard.

,If the transmitter is connected to the

headphones jack, turn up the volume of the

connected audio/video equipment.

,Change the radio frequency with the

CHANNEL selector on the transmitter, then

select the same radio frequency with the switch

on the right housing of the headphones.

,The headphones’ POWER indicator light turns

off, dims, flashes, or sound becomes distorted

or noisy.

•Charge the rechargeable battery if it is weak,

or replace alkaline batteries with new ones. If

the POWER indicator is still off after charging

the battery, take the headphones to a Sony

dealer.

Specifications

General

Carrier frequency

863.52 MHz, 864.52 MHz

Channel Ch1, Ch2

Modulation FM stereo

Frequency response

20 – 20,000 Hz

Transmitter TMR-RF800R

Power source DC 12 V: supplied AC power adaptor

Audio input Stereo mini jack

Dimensions Approx. 105 × 135 × 105 mm

(4 1/4 × 5 3/8 × 4 1/4 in) (w/h/d)

Mass Approx. 115 g (4.06 oz)

Rated power consumption

5 W

Headphones MDR-RF800R

Power source Supplied rechargeable nickel-metal

hydride batteries BP-HP550 or

commercially available (size AAA) dry

batteries

Mass Approx. 220 g (7.77 oz) incl. Batteries

Design and specifications are subject to change

without notice.

CHG CHG

OFF ON

Transmitter

Headphones

CHARGE plug

INPUT CHARGE

CHANNEL

DC IN 12V

1 2

Transmitter

AC power adaptor

(supplied)

To an AC

outlet

To DC IN 12V jack

INPUT CHARGE

CHANNEL

DC IN 12V

1 2

Transmitter

AC power adaptor

(supplied)

To an AC

outlet

To DC IN 12V jack

INPUT CHARGE

CHANNEL

DC IN 12V

1 2

Transmitter

To INPUT jack

Connecting cord

(supplied)

Unimatch plug cord

(supplied)

Right

channel

(red)

Left channel

(white)

To LINE

OUT or

REC OUT

jacks

To headphones

jack (Stereo

mini jack), LINE

OUT or REC

OUT jacks

WALKMAN*, TV,

etc.

Stereo system,

VCR, etc.

Svenska

Härmed intygar Sony Corp. att detta högtalarsystem

står i överensstämmelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser

som framgår av direktiv 1999/5/EG.

Mer information finns på webbadressen:

http://www.compliance.sony.de/

Dansk

Undertegnede, Sony Corp., erklærer herved, at

følgende udstyr overholder de væsentlige krav og

øvrige relevante krav i direktiv 1999/5/EF.

Yderligere oplysninger findes på

http://www.compliance.sony.de/

Suomi

Sony Corp. vakuuttaa täten, että tämä laite on

direktiivin 1999/5/EY oleellisten vaatimusten ja sitä

koskevien direktiivin muiden ehtojen mukainen.

Lisätietoja on seuraavassa Web-sivustossa:

http://www.compliance.sony.de/

Norsk

Herved erklærer Sony Corp.at dette utstyret er i

overensstemmelse med vesentlige krav og andre

relevante bestemmelser som fremgår av direktiv

1999/5/EC.

Gå til denne URL-en for mer informasjon:

http://www.compliance.sony.de/

Ελληνικά

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η Sony Corp. ∆ΗΛΩΝΕΙ ΟΤΙ H

ΣΥΣΚΕΥΗ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ

ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ

ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ.

Για περισστερες λεπτοµέρειες, παρακαλούµε να

επισκεφθείτε την παρακάτω ηλεκτρονική

διεύθυνση (URL): http://www.compliance.sony.de/

Français

Par la présente, Sony Corp. déclare que cet appareil

est conforme aux exigences essentielles et aux autres

dispositions pertinentes de la directive 1999/5/CE.

Pour de plus amples informations, veuillez vous

reporter à l’URL suivante :

http://www.compliance.sony.de/

Deutsch

Hiermit erklärt die Sony Corporation, dass sich dieses

Gerät in Übereinstimmung mit den grundlegenden

Anforderungen und den anderen relevanten

Vorschriften der Richtlinie 1999/5/EG befindet.

Erläuterungen dazu finden Sie unter folgendem URL:

http://www.compliance.sony.de/

Español

Por medio de la presente, Sony Corp. declara que el

equipo cumple con los requisitos esenciales y

cualesquiera otras disposiciones aplicables o exigibles

de la Directiva 1999/5/CE.

Para obtener más información, visite la dirección URL

http://www.compliance.sony.de/

Nederlands

Hierbij verklaart Sony Corp. dat dit toestel in

overeenstemming is met de essentiële eisen en de

andere relevante bepalingen van richtlijn 1999/5/EG.

Ga naar de volgende URL voor meer informatie:

http://www.compliance.sony.de/

Italiano

Con la presente Sony Corp. dichiara che questo

apparecchio è conforme ai requisiti essenziali ed alle

altre disposizioni pertinenti stabilite dalla direttiva

1999/5/CE.

Per ulteriori informazioni, accedere al seguente

indirizzo URL:

http://www.compliance.sony.de/

Português

A Sony Corp., declara que este equipamento está

conforme com os requisitos essenciais e outras

provisões da directiva 1999/5/CE.

Para saber mais pormenores, aceda ao seguinte URL :

http://www.compliance.sony.de/

Sony MDR-RF800RK Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Sony MDR-RF800RK

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info