Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Recording Video Intermittently (Interval Rec)
The Interval Rec function allows you to capture video intermittently to the unit’s internal memory. This function is an
effective way to shoot slow-moving subjects.
When you start recording, the unit automatically records a specified number of frames (Number of Frames) at a specified
interval time (Interval Time).
A: Shooting interval (Interval Time)
B: Number of frames in one take (Number of Frames)
Note
Only one special recording function, such as Interval Rec recording, can be used at any one time.
If another special recording mode is enabled while Interval Rec is in use, Interval Rec is automatically released.
Interval Rec mode is automatically released after changing system settings, such as the video format.
Interval Rec settings cannot be changed during recording or playback, or when the thumbnail screen is displayed.
Limitations during recording
Audio is not recorded.
Reviewing the recording (Rec Review) is not possible.
If the unit is turned off during recording
If the power switch on the unit is set to the standby state, the media is accessed for several seconds to record the
images stored in memory up till that moment, and then the unit switches to standby state automatically.
If the DC power cord is disconnected, the power is turned off from the AC adaptor, or the PoE++ power delivery is
disconnected, then the shots taken up to that point may be lost (maximum 10 seconds). Care should be exercised.
Setting the number of frames and the interval between shooting
Set [Project] > [Interval Rec] > [Setting] to [On] in the web menu, and set [Number of Frames] and [Interval Time].
The unit exits Interval Rec mode when it is powered off, but the [Number of Frames] and [Interval Time] settings are
retained. You do not need to set them again the next time you shoot in Interval Rec mode.
