37274
57
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
57
Cause
Insert a cassette tape with its safety tab at
the record-impossible position.
A new start ID cannot be written within 9
seconds (18 seconds in the long-play
mode) from the end of another start ID.
The start ID is not written correctly.
The portion between the end of a start ID
and the beginning of the following start ID
is less than 9 seconds (18 seconds in the
long-play mode) long.
The selected program number does not
exist on the tape.
The program numbers are out of order.
The skip play function is operating.
(The SKIP indicator lights in the display
window.)
The repeat play function is operating.
There is a blank section between
selections. (The sampling frequency
indicator blinks on the display.)
While writing the start ID (9 seconds or 18
seconds), none of the buttons except the 7
button are operative.
Recording was started from the blank
section.
The portion where you want to write the
end ID is blank.
The portion between the end of a start ID
and the beginning of the following start ID
is less than 9 seconds (18 seconds in the
long-play mode) long.
Two skip IDs are written continuously.
The end ID is written at the beginning of
the tape.
The end ID is written immediately after a
start ID.
Sub Code Operation
Symptom
Sub codes cannot be written.
Start ID cannot be written during recording.
Search function does not operate during
playback.
Search function operates suddenly during
playback.
Search function stops.
The tape operation buttons do not operate
while writing the start ID.
The absolute time codes cannot be written.
End ID cannot be written during playback.
Renumbering function does not operate.
Start ID cannot be erased.
Skip ID cannot be erased.
End ID cannot be erased.
Remedy
Insert a cassette tape with its safety tab at
the record-possible position. (Page 18)
Leave at least 9 seconds (18 seconds in
the long-play mode) from the end of
another start ID.
Erase it (page 33), and then write it again.
When writing the start IDs manually, write
so that the intervals between them are
more than 9 seconds (18 seconds in the
long-play mode.)
Use the RENUMBER button to re-arrange
the program numbers. (page 36)
Turn off the indicator by pressing SKIP
PLAY.
Turn off the indicator by pressing REPEAT
1/ALL.
Use the end search function (page 26)
when recording so that no blank is created.
Operate after the start ID is written.
Rewind the tape to the beginning, or locate
the very last point of the previous recording
by using the end search function (page
26), and start recording from the point.
Set the deck in the record-pause mode by
pressing REC, then write the end ID.
When writing the start IDs manually, write
so that the intervals between them are
more than 9 seconds (18 seconds in the
long-play mode).
When writing the skip IDs, write so that the
intervals between them are more than 1
second (2 seconds in the long-play mode).
Start recording from the beginning of the
tape.
First erase the start ID.
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony DTC630 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony DTC630 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info