59540

Sony DSC-W90S Handleiding

23
Verklein
Vergroot
Pagina terug
1/121
Pagina verder
© 2007 Sony Corporation 3-094-994-12(1)
Digital Still Camera
Cyber-shot Handbook
DSC-W80/W85/W90
Before operating the unit, please read this
Handbook thoroughly together with the
“Instruction Manual” and the “Cyber-shot
Step-up Guide”, and retain them for future
reference.
Table of contents
Basic Operations
Using functions for
shooting
Using functions for
viewing
Customizing the settings
Viewing images on a TV
Using your computer
Printing still images
Troubleshooting
Others
Index
VCLICK!
GB
2
Notes on using your camera
Types of “Memory Stick” that can be
used (not supplied)
The IC recording medium used by this
camera is a “Memory Stick Duo”. There are
two types of “Memory Stick”.
“Memory Stick Duo”: you can use a
“Memory Stick Duo” with your camera.
“Memory Stick”: you cannot use a
“Memory Stick” with your camera.
Other memory cards cannot be used.
• For details on “Memory Stick Duo”, see
page 113.
When using a “Memory Stick Duo” with
“Memory Stick” compatible equipment
You can use the “Memory Stick Duo” by
inserting it into the Memory Stick Duo
Adaptor (not supplied).
Memory Stick Duo Adaptor
Notes on the battery pack
• Charge the battery pack (supplied) before using
the camera for the first time.
• The battery pack can be charged even if it is not
completely discharged. Also, even if the battery
pack is not fully charged, you can use the
partially charged capacity of the battery pack as
is.
• If you do not intend to use the battery pack for a
long time, use up the existing charge and
remove it from your camera, then store it in a
cool, dry place. This is to maintain the battery
pack functions.
• For details on the usable battery pack, see
page 115.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss
lens which is capable of reproducing sharp
images with excellent contrast.
The lens for this camera has been produced
under a quality assurance system certified
by Carl Zeiss in accordance with the quality
standards of Carl Zeiss in Germany.
Notes on the LCD screen and lens
• The LCD screen is manufactured using
extremely high-precision technology so over
99.99% of the pixels are operational for
effective use. However, there may be some tiny
black points and/or bright points (white, red,
blue or green in color) that constantly appear on
the LCD screen. These points are normal in the
manufacturing process and do not affect the
recording in any way.
• Exposing the LCD screen or the lens to direct
sunlight for long periods may cause
malfunctions. Be careful when placing the
camera near a window or outdoors.
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Images may trail across on the LCD screen in a
cold location. This is not a malfunction.
• Be careful not to bump the movable lens, and be
careful not to apply force to it.
The pictures used in this Handbook
The photographs used as examples of pictures in
this Handbook are reproduced images, and are not
actual images shot using this camera.
Black, white, red, blue
or green points
3
Table of contents
Notes on using your camera .....................................................................2
Basic techniques for better images ...........................................................7
Focus – Focusing on a subject successfully..................................................... 7
Exposure – Adjusting the light intensity ............................................................ 8
Color – On the effects of lighting....................................................................... 9
Quality – On “image quality” and “image size”............................................... 10
Identifying parts.......................................................................................12
Indicators on the screen ..........................................................................14
Changing the screen display ...................................................................18
Using the internal memory ......................................................................20
Using the mode dial.................................................................................21
Shooting images easily (Auto Adjustment mode)....................................22
Shooting still images (Scene Selection)..................................................26
Viewing images .......................................................................................29
Deleting images.......................................................................................31
Learning the various functions – HOME/Menu........................................33
Menu items..............................................................................................36
Shooting menu ........................................................................................37
Image Size: Selecting the image size
Face Detection: Detecting the face of subject
REC Mode: Selecting the continuous shooting method
Color Mode: Changing the vividness of the image or adding special effects
ISO: Selecting a luminous sensitivity
EV: Adjusting the light intensity
Metering Mode: Selecting the metering mode
Focus: Changing the focus method
White Bal: Adjusting the color tones
Flash Level: Adjusting the amount of flash light
Red Eye Reduction: Reducing the red-eye phenomenon
SteadyShot: Selecting the anti-blur mode
SETUP: Selecting the shooting settings
Basic Operations
Using functions for shooting
4
Table of contents
Playing back images from the HOME screen............................. 48
(Single Image): Playing back a single image
(Index Display): Playing back a list of images
(Slide Show): Playing back a series of images
Viewing menu ..................................................................................... 51
(Delete): Deleting images
(Slide Show): Playing back a series of images
(Retouch): Retouching still images after shooting
(Protect): Preventing accidental erasure
: Adding a Print order mark
(Print): Printing images using a printer
(Rotate): Rotating a still image
(Select Folder): Selecting the folder for viewing images
Customizing the Manage Memory feature and the Settings
........ 56
Manage Memory ......................................................................... 58
Memory Tool — Memory Stick Tool.................................................. 58
Memory Tool — Internal Memory Tool ............................................. 61
Format
Settings .......................................................................................... 62
Main settings — Main Settings 1 ...................................................... 62
Main settings — Main Settings 2 ...................................................... 63
Shooting Settings — Shooting Settings 1......................................... 65
Shooting Settings — Shooting Settings 2......................................... 67
Clock Settings................................................................................... 68
Using functions for viewing
Customizing the settings
Format
Create REC. Folder
Change REC. Folder
Copy
Beep
Function Guide
Initialize
USB Connect
COMPONENT
Video Out
AF Illuminator
Grid Line
AF Mode
Digital Zoom
Auto Orientation Auto Review
5
Table of contents
Language Setting..............................................................................69
Viewing images on a TV..........................................................................70
Enjoying your Windows computer ...........................................................73
Installing the software (supplied).............................................................75
Copying images to your computer...........................................................76
Viewing image files stored on a computer with your camera (using a
“Memory Stick Duo”) ...............................................................................82
Using the “Picture Motion Browser” (supplied)........................................83
Using the “Music Transfer” (supplied)......................................................89
Using your Macintosh computer..............................................................90
How to print still images ..........................................................................92
Printing images directly using a PictBridge compliant printer .................93
Printing at a shop ....................................................................................96
Troubleshooting .......................................................................................98
Warning indicators and messages ........................................................109
To use your camera abroad — Power sources......................................112
On the “Memory Stick” ..........................................................................113
On the battery pack...............................................................................115
On the battery charger ..........................................................................116
Viewing images on a TV
Using your computer
Printing still images
Troubleshooting
Others
6
Table of contents
Index ..................................................................................................... 117
Index
7
Basic techniques for better images
When you press the shutter button halfway down, the camera adjusts the focus automatically
(Auto Focus). Remember to press the shutter button only halfway down.
To shoot a still image difficult to focus on
t [Focus] (page 42)
If the image looks blurred even after focusing, it may be because of camera shake.
t See
“Hints for preventing blur” (as follows).
Focus
Focusing on a subject successfully
Press the shutter
button fully down
suddenly.
Press the shutter
button halfway
down.
AE/AF lock indicator
flashing , lit/beeps
Then press the
shutter button
fully down.
Hints for preventing blur
Hold the camera steady, keeping your arms at your side. It is recommended to lean
against a tree or a building nearby to steady yourself. Shooting with a 2-second delay
self-timer or using a tripod is also effective. Use the flash when you shoot under a low
light condition.
Focus
Exposure
Color Quality
This section describes the basics so you can
enjoy your camera. It tells you how to use
various camera functions such as the mode
dial (page 21), the HOME screen (page 33),
the menus (page 35), and so on.
8
Basic techniques for better images
You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is
the amount of light that the camera will receive when you release the shutter.
Adjusting ISO Sensitivity (Recommended Exposure Index)
ISO sensitivity is a speed rating for recording media that incorporates an image sensor that
receives light. Even when the exposure is the same, images differ depending on the ISO
sensitivity.
To adjust the ISO sensitivity, see page 41.
Exposure
Adjusting the light intensity
Overexposure
= too much light
Whitish image
The exposure is automatically set to the
proper value in the auto adjustment mode.
However, you can adjust it manually using
the functions below.
Adjusting EV:
Allows you to adjust the exposure
determined by the camera (pages 19, 41).
Metering Mode:
Allows you to change the part of the
subject to be measured to determine the
exposure (page 42).
Correct exposure
Underexposure
= too little light
Darker image
High ISO sensitivity
Records a bright image even when shooting in a dark location.
However, the image tends to become noisy.
Low ISO sensitivity
Records a smoother image.
However, when the exposure is insufficient, the image may become darker.
Shutter speed = Length of time the camera receives
light
Aperture = Size of the opening allowing light to pass
through
ISO sensitivity (Recommended Exposure
Index)
= Recording sensitivity
Exposure:
9
Basic techniques for better images
The apparent color of the subject is affected by the lighting conditions.
Example: The color of an image affected by light sources
The color tones are adjusted automatically in the auto adjustment mode.
However, you can adjust color tones manually with [White Bal] (page 45).
Color
On the effects of lighting
Weather/lighting
Daylight Cloudy Fluorescent Incandescent
Characteristics of
light
White (standard) Bluish Green-tinged Reddish
10
Basic techniques for better images
A digital image is made up of a collection of small dots called pixels.
If it contains a large number of pixels, the picture becomes large, it takes up more memory,
and the image is displayed in fine detail. “Image size” is shown by the number of pixels.
Although you cannot see the differences on the screen of the camera, the fine detail and data
processing time differ when the image is printed or displayed on a computer screen.
Description of the pixels and the image size
Selecting the image size for use (page 11)
Quality
On “image quality” and “image size”
1 Image size: 8M (DSC-W90 only)
3264 pixels × 2448 pixels = 7,990,272 pixels
2 Image size: 7M (DSC-W80/W85 only)
3072 pixels × 2304 pixels = 7,077,888 pixels
3 Image size: VGA
640 pixels × 480 pixels = 307,200 pixels
Pixel
Many pixels (Fine
image quality and
large file size)
Example: Printing in
up to A3 size
Few pixels (Rough
image quality but
small file size)
Example: An attached
image to be sent by e-
mail
Pixels
11
Basic techniques for better images
The default settings are marked with .
1) Images are recorded in 3:2 aspect ratio, same as photograph printing paper or postcards, etc.
2) Both edges of the image may be cut off when printing (page 106).
• The larger the image size, the higher the image quality.
• The more frames per second you played back, the smoother playback can be.
Image size
Guidelines No. of images Printing
8M (3264×2448)
(DSC-W90
only)
For prints up to A3 (11×17") Less
More
Fine
Rough
3:2
1)
(3264×2176)
(DSC-W90
only)
Shoot in 3:2 aspect ratio
7M (3072×2304)
(DSC-W80/W85
only)
For prints up to A3 (11×17")
3:2
1)
(3072×2048)
(DSC-W80/W85
only)
Shoot in 3:2 aspect ratio
5M (2592×1944) For prints up to A4 (8.5×11")
3M (2048×1536) For prints up to 10×15 cm (4×6")
or 13×18 cm (5×7")
VGA (640×480) Shoot at a small image size for
e-mail attachment
16:9
2)
(1920×1080) Shoot in HDTV aspect ratio
Movie image size Frame/Second Usage guidelines
640(Fine) (640×480) Approx. 30 Shoot high quality movie for display on TV
640(Standard) (640×480) Approx. 17 Shoot standard quality movie for display on
TV
320 (320×240) Approx. 8 Shoot at a small size for email attachment
12
Identifying parts
See the pages in parentheses for details of
operation.
A POWER button/POWER lamp
B Shutter button (22)
C Microphone
D Flash (24)
E AF illuminator (65)/Self-timer lamp
(24)
F Finder window
G Lens
A AE/AF lock lamp/Self-timer lamp
(green) (24)
B Flash charging lamp/Record lamp
(orange)
C Finder
D LCD screen (18)
E (Playback) button (29)
F MENU button (35)
G For shooting: Zoom (W/T) button (23)
For viewing: / (Playback zoom)
button/ (Index) button (29, 30)
H Hook for strap
I Battery/“Memory Stick Duo” cover
J Mode dial (21)
K Control button
Menu on: v/V/b/B/z (35)
Menu off: DISP/ / / (18, 24)
L HOME button (33)
M “Memory Stick Duo” slot
N Battery insertion slot
13
Identifying parts
O Access lamp
P Battery eject lever
Q Multi connector (bottom)
Used in the following situations:
• Making a USB connection between the
camera and the computer.
• Making a connection to audio/video input
jacks on a TV.
• Making a connection to a PictBridge
compliant printer.
R Speaker
S Tripod receptacle (bottom)
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to
firmly secure the camera to tripods having
screws longer than 5.5 mm (7/32 inch), and
may damage the camera.
14
Indicators on the screen
Each time you press v (DISP) button, the
display changes (page 18).
See the pages in parentheses for details of
operation.
When shooting still images
When shooting movies
A
Display Indication
Battery remaining
E
Low battery warning (109)
Image size (37)
• is displayed only for
the DSC-W90.
• is displayed only for
the DSC-W80/W85.
Mode dial (Scene
Selection) (26)
Mode dial (Program) (21)
White balance (45)
Recording mode (39)
Metering mode (42)
Face Detection (38)
SteadyShot (47)
Vibration warning
• Indicates vibration may
prevent you from shooting
clear images due to
insufficient lighting. Even if
the vibration warning
appears, you can still shoot
images. However, we
recommend that you turn on
the anti-blur function, using
the flash for better lighting
or using a tripod or other
means to stabilize the
camera (page 7).
Self-timer (24)
Zoom scaling (23, 66)
Color mode (40)
BRK
±1.0
15
Indicators on the screen
B
C
D
Display Indication
1.0m Focus preset distance (42)
z AE/AF lock (22)
Standby
REC
Standby a movie/Recording
a movie
ISO400 ISO number (41)
NR slow shutter
• When the shutter speed
drops below a certain speed
in low light conditions, the
NR (Noise Reduction) slow
shutter function activates
automatically to reduce the
picture noise.
125 Shutter speed
F3.5 Aperture value
+2.0EV Exposure Value (41)
00:00:12 Recording time
AF range finder frame
indicator (42)
Macro (24)
Display Indication
Recording Media
Recording folder (58)
• This does not appear when
using internal memory.
96 Remaining number of
recordable images
00:00:00 Remaining recordable time
AF illuminator (65)
Red-eye reduction (46)
Flash mode (24)
Flash charging
Display Indication
C:32:00 Self-diagnosis display
(109)
Self-timer (24)
Spot metering cross hair
(42)
AF range finder frame (42)
Histogram (18)
16
Indicators on the screen
When playing back still images
When playing back movies
A
B
Display Indication
Battery remaining
Image size (37)
• is displayed only for
the DSC-W90.
• is displayed only for
the DSC-W80/W85.
Protect (53)
VOL. Vo l u m e (29)
Print order (DPOF) mark
(96)
PictBridge connecting (94)
Zoom scaling (29)
PictBridge connecting (95)
• Do not disconnect the cable
for multi-use terminal while
the icon is displayed.
Display Indication
N Playback (29)
Playback bar
00:00:12 Counter
101-0012 Folder-file number (55)
2007 1 1
9:30 AM
Recorded date/time of the
playback image
z STOP
z PLAY
Function guide for playing
image
BACK/
NEXT
Select images
V VOLUME
Adjust volume
Histogram (18)
• appears when histogram
display is disabled.
17
Indicators on the screen
C
Display Indication
Playback Media
Playback folder (55)
• This does not appear when
using internal memory.
8/8 12/12 Image number/Number of
images recorded in selected
folder
Change folder (55)
• This does not appear when
using internal memory.
Metering mode (42)
Flash
White balance (45)
C:32:00 Self-diagnosis display
(109)
ISO400 ISO number (41)
+2.0EV Exposure Value (41)
500 Shutter speed
F3.5 Aperture value
18
Changing the screen display
Each time you press the v (DISP) button,
the display changes as follows.
• If you view images in bright outside light, adjust
the brightness of the LCD backlight up.
However, the battery power may decrease faster
under such condition.
• The display becomes Histogram on t
Indicators off t Indicators on when connected
to a TV (page 70).
• The histogram does not appear in the following
situations:
While shooting
– When the menu is displayed.
– When recording movies
During playback
– When the menu is displayed.
– In index mode
– When you are using playback zoom.
– When you are rotating still images.
– During playback of movies
• During image playback, you cannot turn the
LCD screen off.
• A large difference in the histogram displayed
when shooting and during playback may occur
when:
– The flash strobes.
– The shutter speed is slow or fast.
• The histogram may not appear for images
recorded using other cameras.
• When you set the LCD screen to off, the digital
zoom does not function. When you select
(flash mode)/ (self-timer)/ (macro), the
image is displayed for about two seconds.
v (DISP)
(Screen display
button) button
Brightness of LCD backlight up
Indicators off
Indicators on
Histogram display
(page 19)
Histogram on
During playback,
the image
information is
displayed.
LCD screen off
19
Changing the screen display
z Adjusting EV (Exposure Value) by
displaying a histogram
A histogram is a graph showing the
brightness of an image. Press v (DISP)
repeatedly to display the histogram inside
the screen. The graph display indicates a
bright image when skewed to the right side,
and a dark image when skewed to the left
side.
A Number of pixels
B Brightness
• The histogram also appears when playing back a
single image, but you cannot adjust the
exposure.
BrightDark
A
B
20
Using the internal memory
The camera has approximately 31 MB of internal memory. This memory is not removable.
Even when there is no “Memory Stick Duo” inserted in the camera, you can record images
using this internal memory.
• Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.
We recommend that you copy (back up) data without error using one of the following
methods.
To copy (back up) data on a “Memory Stick Duo”
Prepare a “Memory Stick Duo” with a capacity of 64 MB or more, then perform the procedure
explained in [Copy] (page 60).
To copy (back up) data on a hard disk of your computer
Perform the procedure on pages 76 to 78 without a “Memory Stick Duo” inserted in the
camera.
• You cannot copy image data on a “Memory Stick Duo” to the internal memory.
• By connecting the camera and a computer with a cable for multi-use terminal, you can copy data stored in
the internal memory to a computer. However you cannot copy data on a computer to the internal memory.
When a “Memory Stick Duo” is inserted
[Recording]: Images are recorded on the “Memory Stick
Duo”.
[Playback]: Images on the “Memory Stick Duo” are
played back.
[Menu, Settings, etc.]: Various functions can be
performed on images on the “Memory Stick Duo”.
When there is no “Memory Stick Duo” inserted
[Recording]: Images are recorded using the internal
memory.
[Playback]: Images stored in the internal memory are
played back.
[Menu, Settings, etc.]: Various functions can be
performed on images in the internal memory.
On image data stored in the internal memory
Internal
memory
B
B
21
Basic Operations
Basic Operations
Using the mode dial
Set the mode dial to the desired function.
: Auto Adjustment mode
Allows easy shooting with the settings adjusted automatically. t page 22
: Program Auto mode
Allows you to shoot with the exposure adjusted automatically (both the
shutter speed and the aperture value). Also you can select various setting
using the menu.
(For details on the functions available
t page 36)
: Scene Selection mode
Allows you to shoot with preset settings according to the scene. t page 26
: Movie recording mode
Allows you to record movies with audio. t page 22
Mode dial
22
Shooting images easily (Auto Adjustment mode)
1 Select the desired function from the mode dial.
When shooting still images (Auto Adjustment mode): Select .
When shooting movies: Select .
2 Hold the camera steady, keeping your arm at your side.
3 Shoot with the shutter button.
When shooting still images:
1Press and hold the shutter button halfway down to focus.
The z (AE/AF lock) indicator (green) flashes, a beep sounds, the indicator stops flashing and
remains lit.
HOME button
MENU button
Zoom button
Shutter button
Control button
v/V/b/B button
z button
Macro button
DISP button
Self-timer button
Flash button
Finder
Mode dial
Position the subject
in the center of the
focus frame.
23
Basic Operations
Shooting images easily (Auto Adjustment mode)
2Press the shutter button fully down.
When shooting movies:
Press the shutter button fully down.
To stop recording, press the shutter button fully down again.
If you shoot a still image of a subject that is difficult to focus on
• The shortest shooting distance is approx. 50 cm (19 3/4 inches). Shoot in the close-up (Macro) mode
when you shoot a subject closer than the shooting distance (page 24).
• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing
slowly and the beep does not sound. In addition, the AF range finder frame disappears. Recompose the
shot and focus again.
Subjects difficult to focus on are:
– Distant from the camera and dark
– The contrast between the subject and its background is poor.
– Seen through glass
–Moving fast
– Reflective light or with a lustrous finish
–Flashing
– Backlit
W/T Using the zoom
Press T to zoom, press W to undo the zoom.
• When the zoom scale exceeds 3×, the camera uses the Digital Zoom function.
For details on the [Digital Zoom] settings and the image quality, see page 66.
• You cannot change the zoom scale while shooting a movie.
AE/AF lock
24
Shooting images easily (Auto Adjustment mode)
Flash (Selecting a flash mode for still images)
Press B ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Flash Auto
Strobes when there is insufficient light or backlight (default setting).
: Flash forced on
: Slow synchro (Flash forced on)
The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.
: Flash forced off
• The flash strobes twice. The first time is to adjust the light quantity.
• While charging the flash, is displayed.
Macro (Shooting close-up)
Press b ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Macro Off
: Macro On (W side: Approx. 4 cm or farther (1 5/8 inches or farther), T side: Approx. 35 cm or farther
(13 7/8 inches or farther))
Macro
• Setting the zoom all the way to the W side is recommended.
• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
• The Auto Focus speed drops when you shoot images in the Macro.
Using the self-timer
Press V ( ) on the control button repeatedly until the desired mode is selected.
(No indicator): Not using the self-timer
: Setting the 10-second delay self-timer
: Setting the 2-second delay self-timer
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter
operates.
25
Basic Operations
Shooting images easily (Auto Adjustment mode)
To cancel, press V ( ) again.
• Use the 2-second delay self-timer to prevent blur of an image made by the shaking of the
camera when pressing the shutter button.
Self-timer lamp
26
Shooting still images (Scene Selection)
1 Select the desired mode of Scene Selection ( , , , , , , ) with
the mode dial.
• For details on mode, see next page.
2 Shoot with the shutter button.
To cancel the Scene selection
Set the mode dial to other than the mode of Scene Selection.
Shutter button
Mode dial
27
Basic Operations
Shooting still images (Scene Selection)
Scene Selection modes
The following modes are predetermined to match the scene conditions.
*When you shoot images using (Twilight Portrait) or (Twilight) mode, the shutter speed is slower.
To prevent a blurring, use of a tripod is recommended.
High Sensitivity
Allows you to shoot images
without a flash under low light
conditions, reducing blur.
Soft Snap
Allows you to shoot images with a
softer atmosphere for portraits of
people, flowers, etc.
Twilight Portrait*
Suitable for shooting portraits in
dark places. Allows you to shoot
sharp images of people in dark
places without losing the dark
atmosphere of the surroundings.
Twilight*
Allows you to shoot night scenes
at far distance without losing the
dark atmosphere of the
surroundings.
Landscape
Focuses only on a distant subject
to shoot landscapes, etc.
Beach
When shooting seaside or lakeside
scenes, the blue of the water is
clearly recorded.
Snow
When shooting snowy scenes or
other places where the whole
screen appears white, use this
mode to prevent sunken colors
and record clear images.
28
Shooting still images (Scene Selection)
Functions you can use in Scene Selection
For shooting an image appropriately according to the scene condition, a combination of
functions is determined by the camera. Some functions are not available, depending on the
Scene Selection mode.
( : you can select the desired setting)
* [Flash] cannot be selected.
Macro Flash
Face
Detection
Burst/
Bracket
EV White Bal
Red Eye
Reduction
SteadyShot
—— *—
—
—— —
—————
— / — —
/ — —
/ — —
29
Basic Operations
Viewing images
1 Press (Playback) button.
• If you press (Playback) when the camera is powered off, the camera is turned on automatically
and set to playback mode. To switch to the shooting mode, press (Playback) again.
2 Select an image with b/B on the control button.
Movie:
Press
z to playback a movie. (Press z again to stop playback.)
Press
B to fast forward, b to rewind. (Press z to return to normal playback.)
Press V to display the volume control screen, then press
b/B to adjust the volume.
• Movies with the image size [320] are displayed a size smaller.
/ To view an enlarged image (playback zoom)
Press while displaying a still image.
To undo the zoom, press .
Adjust the position: v/V/b/B
Cancel playback zoom: z
• To store enlarged images: [Trimming] (page 52)
v/V/b/B button
z button
(Playback zoom)
button
(Playback zoom)/
(Index) button
(Playback)
button
HOME button
Control button
MENU button
30
Viewing images
Viewing an index screen
Press (Index) to display the index screen while a still image is displayed.
Select an image with v/V/b/B.
To return to the single image screen, press z.
When using the “Memory Stick Duo”, if there are number of folders, select the folder
selection bar with b, then select the desired folder with v/V.
• You can also access the index screen by selecting [ Index Display] from (View
Images) on the HOME screen.
• Each time you press (Index), the number of pictures on the index screen changes.
31
Basic Operations
Deleting images
1 Press (Playback) button.
2 Press MENU while display in single-image mode or in index mode.
3 Select [Delete] with v on the control button.
4 Select the desired deletion method with b/B from among [This Image],
[Multiple Images] and [All In This Folder], then press z.
Control button
v/V/b/B button
z button
MENU button
(Index) button
(Playback) button
32
Deleting images
When you select [This Image]
Deletes the selected image.
Select [OK] with v, then press z.
When you select [Multiple Images]
Selects and deletes multiple images at once.
1 Select the images you want to delete, then press z.
mark is checked in the checkbox of the image.
2 Press MENU.
3 Select [OK] with v, then press z.
When you select [All In This Folder]
Deletes all the images in the selected folder.
Select [OK] with v, then press z.
• After you select [Multiple Images] on the index screen, you can delete all the images in a
folder by selecting the folder selection bar with b and attaching a mark on the folder.
Single Image Index Display
33
Basic Operations
Learning the various functions – HOME/Menu
The HOME screen is the basic screen used for accessing the various functions you can access
the HOME screen regardless of the shooting/viewing mode.
1 Press HOME to display the HOME screen.
2 Select a category with b/B on the control button.
3 Select an item with v/V, then press z.
• You cannot display the HOME screen when a PictBridge connection or a USB connection is
made.
• The camera is set to the shooting mode by pressing the shutter button halfway down.
Using the HOME screen
Control button
v/V/b/B button
z button
HOME button
Category
Item
Guide
34
Learning the various functions – HOME/Menu
Pressing HOME button displays the following items. Details on the items are displayed on the
screen by the guide.
*Shooting mode selected in the mode dial will be applied.
HOME items
Category Items
Shooting* Shooting (page 21)
View Images Single Image (page 48)
Index Display (page 48)
Slide Show (page 48)
Printing, Other Print (page 93)
Music Tool (page 89)
Download Music Format Music
Manage Memory Memory Tool
Memory Stick Tool (page 58)
Format Create REC. Folder
Change REC. Folder Copy
Internal Memory Tool (page 61)
Format
Settings Main settings
Main Settings 1 (page 62)
Beep Function Guide
Initialize
Main Settings 2 (page 63)
USB Connect COMPONENT
Video Out
Shooting Settings
Shooting Settings 1 (page 65)
AF Illuminator Grid Line
AF Mode Digital Zoom
Shooting Settings 2 (page 67)
Auto Orientation Auto Review
Clock Settings (page 68)
Language Setting (page 69)
35
Basic Operations
Learning the various functions – HOME/Menu
1 Press MENU to display the menu.
• The menu will be displayed only during shooting and playback mode.
• Different items will become visible depending on the selected mode.
2 Select the desired menu item with v/V on the control button.
• If the desired item is hidden, keep pressing v/V until the item appears on the screen.
3 Select a setting with b/B.
• If the desired setting is invisible, keep pressing b/B until the setting appears on the screen.
•Press z after selecting an item in playback mode.
4 Press MENU to turn off the menu.
Using the menu items
MENU button
v/V/b/B button
z button
Control button
Function Guide
Setting [Function Guide] to [Off] turns
off the function guide (page 62).
36
Menu items
The available menu items vary depending on the camera mode.
The shooting menu is available only in the shooting mode, and the viewing menu is available
only in the playback mode.
Also, the menu items available vary depending on the mode dial position. Only the available
items are displayed on the screen.
*The operation is limited according to the selected Scene Selection mode (page 28).
( : available)
Mode dial position: Scene
Menu for shooting (page 37)
Image Size
Face Detection
—
* —
REC Mode
*
—
Color Mode —
—
ISO —
—
—
EV
Metering Mode —
—
Focus —
—
White Bal —
*
Flash Level —
—
—
Red Eye Reduction
*
—
SteadyShot —
SETUP
Menu for viewing (page 51)
(Delete) (Slide Show)
(Retouch) (Protect)
(Print)
(Rotate) (Select Folder)
37
Using functions for shooting
Using functions for shooting
Shooting menu
The functions in shooting mode using MENU button are described below. For details on how
to operate the menu, see page 35.
The default settings are marked with .
For still images
For movie
You cannot select the mode displayed in grey.
Image Size: Selecting the image size
(DSC-W90 only)
Selects image size for shooting still images. For details, see
pages 10, 11.
(DSC-W80/W85 only)
(Fine)
Selects image size for recording movies. For details, see
page 11.
(Standard)
AvailableUnavailable
38
Shooting menu For details on the operation 1 page 35
Selects whether to use the Face Detect function or not.
• When [Face Detection] is set to [On], Digital zoom does not function.
• Available only for Soft Snap when you select the Scene Selection mode. In this case, the
default setting will be [On].
• Up to 8 faces of your subjects can be detected. However, only up to 2 faces of your subjects
can be detected when you shoot images with Soft Snap.
• When the camera detects more than subjects, the camera will judge which is the main
subject and set focus by priority.
• The frame which the focus is set will turn green by pressing the shutter button half way
down. Even when the frame does not turn green, if the distance of the subject which the
focus is set on and other subjects are the same, the focus is set on all subjects.
• Face Detection may fail, depending on the conditions under which it is used.
Face Detection: Detecting the face of
subject
(On)
Detecting the faces of your subject will also adjust focus,
strobe, exposure, white balance, and pre-strobe for red-eye
reduction.
(Off)
Does not use Face Detection function.
Face Detection frame
Face Detection mark
39
Using functions for shooting
Shooting menu For details on the operation 1 page 35
Selects whether the camera performs continuous shooting or not when you press the shutter button.
On the Burst
• When recording with the self timer, a series of a maximum of five images is recorded.
• The recording interval is approximately 0.46 seconds (DSC-W90) or 0.36 seconds (DSC-W80/W85). The
recording interval becomes longer, depending on the setting for the image size.
• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst
stops.
• You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 28).
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When the exposure is manually adjusted (page 41), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 0.5 seconds (DSC-W90) or 0.4 seconds (DSC-W80/W85).
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step
value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection
mode (page 28).
REC Mode: Selecting the continuous
shooting method
(Normal)
Does not shoot continuously.
(Burst)
Records up to 100 images in succession when you press and
hold down the shutter button.
• The flash is set to (Flash forced off).
BRK ±0.3EV
Records a series of three images with the exposure values
automatically shifted (Exposure Bracket).
The larger the bracket step value, the larger the shift of the
exposure value.
• When you cannot decide the correct exposure, shoot in the
Exposure Bracket mode, shifting the exposure value. You can
select the image with the best exposure afterward.
• When the mode dial is set to , the Exposure Bracket mode is
not available.
• The flash is set to (Flash forced off).
BRK ±0.7EV
BRK ±1.0EV
40
Shooting menu For details on the operation 1 page 35
You can change the brightness of the image, accompanied by effects.
• You can select only [Normal], [Sepia] or [B & W] when shooting movies.
Color Mode: Changing the vividness of
the image or adding special effects
(Normal)
(Vivid)
Sets the image to bright and deep color.
(Natural)
Sets the image to quiet color.
(Sepia)
Sets the image to sepia color.
(B & W)
Sets the image to monochromatic color.
41
Using functions for shooting
Shooting menu For details on the operation 1 page 35
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the
sensitivity.
• For details on the ISO sensitivity, see page 8.
• Note that the image tends to become noisier as the ISO sensitivity number increases.
• [ISO] is set to [Auto] in the Scene Selection mode.
• You can select only from [ISO AUTO], [ISO 100] to [ISO 400] when set to Burst or Exposure Bracket.
• When shooting under brighter conditions, the camera automatically increases its tone reproduction and
helps prevent images to become whitish (excluding when [ISO] is set to [ISO 100]).
Manually adjusts the exposure.
• For details on the Exposure, see page 8.
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure
adjustment may not be effective.
ISO: Selecting a luminous sensitivity
Select a large number when shooting in dark locations or
shooting a subject moving at high speed, or select a small
number to obtain high image quality.
EV: Adjusting the light intensity
–2.0EV
Toward –: Darkens an image.
0EV
The exposure is determined automatically by the camera.
+2.0EV
Toward +: Brightens an image.
High ISO sensitivityLow ISO sensitivity
Toward +Toward –
42
Shooting menu For details on the operation 1 page 35
Selects the metering mode that sets which part of the subject to measure to determine the
exposure.
• For details on the Exposure, see page 8.
• When using spot metering or center-weighted metering, setting [Focus] to [Center AF] is recommended to
focus on the metering position (page 42).
You can change the focus method. Use the menu when it is difficult to get the proper focus in
auto focus mode.
Metering Mode: Selecting the metering
mode
(Multi)
Divides into multiple regions and measures each region. The
camera determines a well-balanced exposure (Multi-pattern
metering).
(Center)
Measures the center of the image, and determines the
exposure based on the brightness of the subject there (Center-
weighted metering).
(Spot)
(Only for still image)
Measures only a part of the subject (Spot metering).
• This function is useful when the subject is backlit or when there
is strong contrast between the subject and the background.
Focus: Changing the focus method
(Multi AF)
Focuses on a subject in all ranges of the finder frame
automatically.
• This mode is useful when the subject is not in the center of the
frame.
Spot metering cross hairs
Positions on the subject
AF range finder frame
(Only for still image)
AF range finder frame
indicator
43
Using functions for shooting
Shooting menu For details on the operation 1 page 35
• AF stands for Auto Focus.
• Distance setting information in “Focus Preset” is approximate. If you point the lens up or down, the error
increases.
• When you use Digital Zoom or AF illuminator, the normal AF range finder frame is disabled and a new
AF range finder frame is displayed by a dotted line. In this case, the priority of AF movement is given to
subjects around the center of the frame.
(Center AF)
(Only for still image)
Focuses on a subject in the center of the finder frame
automatically.
• Using together with the AF lock function lets you shoot in the
desired image composition.
(Spot AF)
(Only for still image)
Focuses on an extremely small subject or a narrow area
automatically.
• Using together with the AF lock function lets you shoot in the
desired image composition. Hold the camera steady not to
misalign the subject and the AF range finder frame.
0.5 m
Focuses on the subject using a previously set distance to the
subject. (Focus preset)
• When shooting a subject through a net or through window glass,
it is difficult to get the proper focus in auto focus mode. In these
cases, use of [Focus] is convenient.
1.0 m
3.0 m
7.0 m
(unlimited distance)
AF range finder frame
AF range finder frame
indicator
AF range finder frame
AF range finder frame
indicator
44
Shooting menu For details on the operation 1 page 35
z If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot
AF], the camera may not focus on a subject at the edge of the frame.
In such cases, do as follows.
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter
button halfway down to focus on the subject (AF lock).
As long as you do not press the shutter button fully down, you can retry the procedure as many
times as you want.
2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot,
and press the shutter button fully down.
96P
AE/AF lock indicator
AF range finder frame
45
Using functions for shooting
Shooting menu For details on the operation 1 page 35
Adjusts the color tones according to the lighting condition in a situation, for example, when
the colors of an image look strange.
White Bal: Adjusting the color tones
(Auto)
Adjusts the White Balance automatically.
(Daylight)
Adjusts for conditions outside under a clear sky, at sundown,
night scenes, the presence of neon signs or fireworks.
(Cloudy)
Adjusts for a cloudy sky or a shady location.
(Fluorescent Light 1)/
(Fluorescent Light 2)/
(Fluorescent Light 3)
Fluorescent Light 1: Adjust for white fluorescent lighting.
Fluorescent Light 2: Adjust for natural white fluorescent
lighting.
Fluorescent Light 3: Adjust for day white fluorescent
lighting.
n (Incandescent)
Adjusts for places under incandescent lamp, or under bright
lighting, such as in a photo studio.
46
Shooting menu For details on the operation 1 page 35
• For details on the white balance, see page 9.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2], [Fluorescent Light 3].
• Except in [Flash] modes, [White Bal] is set to [Auto] when the flash strobes.
Adjusts the amount of flash light.
• To change flash mode, see page 24.
The flash strobes two or more times before
shooting to reduce the red-eye phenomenon when
using the flash.
(Flash)
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Flash Level: Adjusting the amount of
flash light
(–)
Toward –: Makes the flash level lower.
(Normal)
(+)
Toward +: Makes the flash level higher.
Red Eye Reduction: Reducing the red-eye
phenomenon
(Auto)
Reduces the red-eye phenomenon whenever necessary, only
when using the Face Detection Function.
(On)
The flash always strobes to reduce the red-eye phenomenon.
(Off)
Does not use Red Eye Reduction.
47
Using functions for shooting
Shooting menu For details on the operation 1 page 35
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions. In such a case, you can correct
the red-eye phenomenon using [Retouch] in the viewing menu after shooting (page 52).
• When the Face Detection function is not used, the Red Eye Reduction will not function even when [Auto]
is selected.
Selects the anti-blur mode.
• In Auto Adjustment mode, [SteadyShot] will be set to [Shooting].
• For movies, the options are limited to [Continuous] and [Off].
The default setting is set to [Continuous].
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Select the settings for the shooting function. These items appearing in this menu are same ones
as those in [ Shooting Settings] on the HOME screen. See page 34.
SteadyShot: Selecting the anti-blur mode
(Shooting)
Activates the anti-blur function when pressing the shutter
button halfway down.
(Continuous)
Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
(Off)
Does not use anti-blur mode.
SETUP: Selecting the shooting settings
48
Using functions for viewing
Playing back images from the HOME screen
You can select the ways to playback images.
1 Press HOME.
2 Select (View Images) with b/B on the control button.
3 Select the desired viewing method with v/V.
Displays the image shot last. This is the same as pressing the (Playback) (page 29).
Displays a list of images contained in the selected folder. This is the same as pressing the
(Index) (page 30).
1 Select [ Slide Show] on the HOME screen.
2 Select [Start] with v/V, then press z to start playback.
To pause the slide show
Press z on the control button.
To restart, select [Continue] with
v/V, then press z.
• The slide show resumes from the image which was paused, however, the music starts again from the
beginning.
(Single Image): Playing back a single image
(Index Display): Playing back a list of images
(Slide Show): Playing back a series of images
HOME button
49
Using functions for viewing
Playing back images from the HOME screen
To display the previous/next image
Press b/B while the slide show is paused.
To adjust the volume of the music
Press V to display the volume control screen, the press b/B to adjust the volume.
To end the slide show
Select [Exit] with v/V while the slide show is paused, then press z.
To change the setup
The default settings are marked with .
• When set to [Simple], [Nostalgic], [Stylish] or [Active] only still images are displayed.
• Music is not played (set to [Off]) during a [Normal] slide show. The sound of movies will be heard.
Image
When you use a “Memory Stick Duo” (not supplied)
Folder
Plays back all the images in the selected folder.
All
Plays back all the images in a “Memory Stick Duo” in order.
Effects
Simple
A simple slide show suitable for a wide range of scenes.
Nostalgic
A moody slide show reproducing the atmosphere of a movie
scene.
Stylish
A stylish slide show proceeding at a middle tempo.
Active
A high-tempo slide show suitable for active scenes.
Normal
A basic slide show switching images at a predetermined
interval.
50
Playing back images from the HOME screen
z To add /change Music files
You can transfer a desired music file from your CDs or MP3 files to the camera to playback during Slide
show. You can transfer music using [ Music Tool] in (Printing, Other) on the HOME screen and the
“Music Transfer” software (supplied) installed on a computer. For details, see pages 89 and 91.
• You can record up to four pieces of music on the camera (The four preset pieces (Music 1-4) can be
replaced with the ones you transferred).
• A maximum length of each music file for music playback of the camera is 180 seconds.
• If you cannot playback a Music file due to damage or other malfunctions to the file, execute [Format
Music] (page 89) and transfer the music again.
Music
The preset-Music differs depending on the effect you select.
Music 1
The default setting for a [Simple] slide show.
Music 2
The default setting for a [Nostalgic] slide show.
Music 3
The default setting for a [Stylish] slide show.
Music 4
The default setting for a [Active] slide show.
Off
Setting for a [Normal] slide show. No Music available.
Interval
3 sec
Sets the display interval of images for a [Normal] slide show.
5 sec
10 sec
30 sec
1 min
Auto
The interval is set to suit the selected [Effects] item.
The setting is fixed to [Auto] when [Normal] is not selected
as the [Effects].
Repeat
On
Plays back images in a continuous loop.
Off
After all the images have been played back, the slide show
ends.
51
For details on the operation 1 page 35
Using functions for viewing
Viewing menu
This section explains the menu items available when you press MENU button in playback
mode. For details on how to use the menu, see page 35.
Selects and deletes images on the single-image screen or the index screen. see page 31
This item has same function as [ Slide Show] on the HOME screen.
See page 48.
• The trimmed image is recorded as the newest file in the selected recording folder, and the original image is
retained.
(Delete): Deleting images
(This Image)
Deletes the image that is now selected.
(Multiple Images)
Selects and deletes multiple images.
(All In This Folder)
Deletes all the images in the selected folder.
(Slide Show): Playing back a series of images
(Retouch): Retouching still images after shooting
(Soft Focus)
Blurs the periphery around a chosen point to signalize a subject.
1 Set the center point of the desired image to retouch with v/V/
b/B, then press MENU button.
2 Select [Level] with v/V and press z, adjust level of retouch
with v/V, then press z again.
3 Adjust the desired range to retouch with W/T button.
4 Select [OK] with v/V, then press z.
(Partial Color)
Surrounds a chosen point in monochrome to signalize a subject.
1 Set the center point of the desired image to retouch with v/V/
b/B, then press MENU button.
2 Adjust the desired range to retouch with W/T button.
3 Select [OK] with v/V, then press z.
52
Viewing menu For details on the operation 1 page 35
When you select [Trimming]
• The image size that you can trim may vary depending on the image.
• The quality of trimmed images may deteriorate.
(Fisheye Lens)
Applies a fisheye effect around a chosen point.
1 Set the center point of the desired image to retouch with v/V/
b/B, then press MENU button.
2 Select [Level] with v/V and press z, adjust level of retouch
with v/V, then press z again.
3 Select [OK] with v/V, then press z.
(Cross Filter)
Adds starburst effects to light sources.
1 Select [Level] with v/V and press z, adjust level of retouch
with v/V, then press z again.
2 Adjust the desired length to retouch with W/T button.
3 Select [OK] with v/V, then press z.
(Trimming)
Records the zoomed playback image.
1 Press W/T button to zoom in on the trimming range.
2 Set the point with v/V/b/B, then press MENU button.
3 Selects [Image Size] with v/V and press z.
Selects Image Size to record with v/V, then press z again.
4 Select [OK] with v/V, then press z.
(Red Eye Correction)
Corrects the red-eye phenomenon caused by flash.
Select [OK] with v/V, then press z.
• You may not be able to correct the red-eye phenomenon depending
on the image.
53
Using functions for viewing
Viewing menu For details on the operation 1 page 35
Protects images against accidental erasure.
To protect an image
1 Select the images you want to protect while displaying images in single-image mode or in index
mode.
2 Press MENU.
3 Select [Protect] with v/V, and select [This Image] with b/B, then press z.
The image is protected and the (Protect) indicator appears on the image.
To select and protect images
1 Press MENU in single-image mode or in index mode.
2 Select [Protect] with v/V, and select [Multiple Images] with b/B, then press z.
In single-image mode:
3 Select the image you want to protect with b/B on the control button, then press z.
is attached to the selected image.
4 Press b/B to display other images you want to protect, then press z.
5 Press MENU.
6 Select [OK] with v, then press z.
In index mode:
3 Select the image you want to protect with v/V/b/B on the control button, then press z.
is attached to the selected image.
4 To protect other images, repeat step 3.
5 To select all the images in a folder, select the folder selection bar with b, then press z.
is attached to the selected folder.
6 Press MENU.
7 Select [OK] with v, then press z.
(Protect) indicator appears on the selected images.
(Protect): Preventing accidental erasure
(This Image)
Protects/unlocks the currently selected image.
(Multiple Images)
Selects and protects/unlocks multiple images.
54
Viewing menu For details on the operation 1 page 35
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by performing the
same procedure to protect it.
(Protect) indicator disappears.
• Note that the formatting erases all the data stored on the recording media, even if the images
are protected, and these images cannot be restored.
• It may take some time to protect an image.
Adds (Print order) mark to images you want to print.
See page 96.
See page 93.
This item has same function as [ Print] on the HOME screen.
Rotates a still image.
1 Display the image to be rotated.
2 Press MENU to display the menu.
3 Select [Rotate] with v/V on the control button, then press z.
4 Select [ ], then rotate the image with b/B.
5 Select [OK] with v/V, then press z.
• You cannot rotate protected images or movies.
• You may not be able to rotate images shot with other cameras.
• When viewing images on a computer, the image rotation information may not be reflected depending on
the software.
: Adding a Print order mark
(This Image)
Attaches/clears the DPOF-based print marks to (from) the image
that is now selected.
(Multiple Images)
Selects images and attaches/clears the DPOF-based print marks to
(from) the images.
(Print): Printing images using a printer
(Rotate): Rotating a still image
55
Using functions for viewing
Viewing menu For details on the operation 1 page 35
Selects the folder containing the image you want to playback when using the camera with
“Memory Stick Duo”.
1 Select the desired folder with b/B on the control button.
2 Select [OK] with v, then press z.
To cancel selecting the folder selection
Select [Exit] in step 2, then press z.
z On the folder
The camera stores images in a specified folder of a “Memory Stick Duo”. You can change the folder or
create a new one.
• To create a new folder t [Create REC. Folder] (page 58)
• To change the folder for recording images t [Change REC. Folder] (page 59)
• When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is
displayed, the following indicators appear.
: Moves to the previous folder
: Moves to the next folder
: Moves to either the previous or next folders
(Select Folder): Selecting the folder for viewing images
56
Customizing the settings
Customizing the Manage Memory feature
and the Settings
You can change the default settings using (Manage Memory) or (Settings) on the
HOME screen.
1 Press HOME to display the HOME screen.
2 Select (Manage Memory) or (Settings) with b/B on the control button.
3 Select the desired item with v/V, then press z.
4 Press B and select the desired setting with v/V, then press z.
Control button
v/V/b/B button
z button
HOME button
57
Customizing the settings
Customizing the Manage Memory feature
and the Settings
For details on the operation 1 page 56
5 Select the desired setting with v/V, then press z.
To cancel the setting change
Select [Cancel] if it is one of the setting item, then press z.
If not, press b on the control button.
• This setting is maintained even when the power is turned off.
• The camera is set to the shooting mode by pressing the shutter button halfway down.
58
For details on the operation 1 page 56
Manage Memory
Memory Tool — Memory Stick Tool
This item appears only when a “Memory Stick Duo” is inserted in the camera.
Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already
formatted, and can be used immediately.
• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected
images.
1 Select [Format] with v/V/b/B on the control button, then press z.
The message “All data on Memory Stick will be erased” appears.
2 Select [OK] with v, then press z.
The format is completed.
To cancel the formatting
Select [Cancel] in step 2, then press z.
Creates a folder in a “Memory Stick Duo” for recording images.
1 Select [Create REC. Folder] with v/V/b/B on the control button, then press z.
The folder creation screen appears.
2 Select [OK] with v, then press z.
A new folder is created with a number incremented one higher than the largest number, and the
folder becomes the current recording folder.
To cancel the folder creation
Select [Cancel] in step 2, then press z.
• When not creating a new folder, the “101MSDCF” folder is selected as the recording folder.
• You can create folders designated up to “999MSDCF”.
• Images are recorded in the newly created folder until a different folder is created or selected.
• You cannot delete a folder with the camera. To delete a folder, use your computer, etc.
• Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is
automatically created.
• For details, see “Image file storage destinations and file names” (page 81).
Format
Create REC. Folder
59
Customizing the settings
Manage Memory For details on the operation 1 page 56
Changes the folder currently used for recording images.
1 Select [Change REC. Folder] with v/V/b/B on the control button, then press z.
The folder selection screen appears.
2 Select the desired folder with b/B, and [OK] with v, then press z.
To cancel changing the recording folder
Select [Cancel] in step 2, then press z.
• You cannot select the “100MSDCF” folder as a recording folder.
• You cannot move recorded images to a different folder.
Change REC. Folder
60
Manage Memory For details on the operation 1 page 56
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2 Select [Copy] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be copied” appears.
3 Select [OK] with v, then press z.
Copying starts.
To cancel the copying
Select [Cancel] in step 3, then press z.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
[Internal Memory Tool] (page 61).
• When you copy the data in the internal memory to the “Memory Stick Duo”, all the data will be copied.
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be
copied.
• Even if you copy data, a (Print order) mark is not copied.
Copy
61
Customizing the settings
Manage Memory For details on the operation 1 page 56
Memory Tool — Internal Memory Tool
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [Format] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be erased” appears.
2 Select [OK] with v, then press z.
The format is completed.
To cancel the formatting
Select [Cancel] in step 2, then press z.
Format
62
For details on the operation 1 page 56
Settings
Main settings — Main Settings 1
The default settings are marked with .
Selects the sound produced when you operate the camera.
When you operate the camera, the description of functions is displayed.
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
1 Select [Initialize] with v/V/b/B, then press z.
The message “Initialize all settings” appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 2, then press z.
• Make sure that the power is not disconnected during resetting.
Beep
Shutter
Turns on the shutter sound when you press the shutter button.
On
Turns on the beep/shutter sound when you press the control
button/press the shutter button.
Off
Turns off the beep/shutter sound.
Function Guide
On
Displays the function guide.
Off
Does not display the function guide.
Initialize
63
Customizing the settings
Settings For details on the operation 1 page 56
Main settings — Main Settings 2
The default settings are marked with .
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable for multi-use terminal.
Selects the video signal output type from SD and HD(1080i), according to the TV connected
see page 70.
USB Connect
PictBridge
Connects the camera to a PictBridge compliant printer
(page 93). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the
recording folder on the camera are copied to the computer.
(with WindowsXP, MacOSX)
Mass Storage
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 77).
Auto
The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 77 and 93).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the setting to [Mass
Storage].
COMPONENT
HD(1080i)
Selects this item to connect the camera to a 1080i-capable
High Definition TV.
SD
Selects this item to connect the camera to a TV that is not
compatible with an HD(1080i) signal.
64
Settings For details on the operation 1 page 56
Sets the video signal output according to the TV color system of the connected video
equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 72 for the TV color system of the country or region
where the camera is used.
Video Out
NTSC
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL
Sets the video output signal to PAL mode (e.g., for Europe).
65
Customizing the settings
Settings For details on the operation 1 page 56
Shooting Settings — Shooting Settings 1
The default settings are marked with .
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button
is pressed halfway, until the focus is locked. The indicator appears at this time.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will
not be achieved. (A distance of up to approximately 3.5 m (11 feet 5 7/8 inches) (zoom: W) / 2.5 m (8 feet
2 1/2 inches) (zoom: T) is recommended.) (DSC-W90)/(A distance of up to approximately 2.5 m (8 feet
2 1/2 inches) (zoom: W) / 2.0 m (6 feet 6 3/4 inches) (zoom: T) is recommended.) (DSC-W80/W85)
• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the
center of the subject.
• When Focus preset is set (page 42), AF Illuminator does not function.
• When you use AF illuminator, the normal AF range finder frame is disabled and new AF range finder
frame is displayed by a dotted line. AF operates with priority on subjects located near the center of the
frame.
• The AF illuminator does not operate when (Twilight mode) or (Landscape mode) is selected in the
Scene mode.
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look
directly into the AF illuminator emitter at close range.
• When [Face Detection] is set to [On], AF Illuminator does not function.
With reference to the grid lines, you can easily set a subject in a horizontal/vertical position.
• The grid lines are not recorded.
AF Illuminator
Auto
Uses the AF illuminator.
Off
Does not use AF illuminator.
Grid Line
On
Displays the grid lines.
Off
Does not display the grid line.
66
Settings For details on the operation 1 page 56
Selects the auto focus operation mode.
• When [Face Detection] is set to [On], the AF mode is disabled.
Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3×).
When the zoom scale exceeds 3×, the camera uses either smart or precision digital zoom.
Image size and maximum zoom scale using Smart zoom
• When [Face Detection] is set to [On], you cannot use the Digital Zoom.
• When you set the LCD screen to off, you cannot use the digital zoom.
AF Mode
Single
Automatically adjusts the focus when the shutter button is
pressed and held halfway down. This mode is useful for
shooting stationary subjects.
Monitor
Automatically adjusts the focus before the shutter button is
pressed and held halfway down. This mode shortens the time
needed for focusing.
• Battery consumption is faster than in [Single] mode.
Digital Zoom
Smart
(Smart zoom)
()
Enlarges the image digitally within the range where the image
will not be distorted, according to the image size. This is not
available when the image size is set to [8M] (DSC-W90),
[7M] (DSC-W80/W85) or [3:2].
• The maximum zoom scale of Smart zoom is shown in the
following table.
Precision
(Precision digital zoom)
()
Enlarges all image sizes up to a maximum of 6×, but the
image quality deteriorates.
Off
Does not use the digital zoom.
Maximum zoom scale
Size DSC-W90 DSC-W80/W85
5M Approx. 3.8× Approx. 3.6×
3M Approx. 4.8× Approx. 4.5×
VGA Approx. 15× Approx. 14×
16:9 Approx. 5.1× Approx. 4.8×
67
Customizing the settings
Settings For details on the operation 1 page 56
Shooting Settings — Shooting Settings 2
The default settings are marked with .
When the camera is rotated to shoot a portrait image, the camera records its position change
and displays the image in the portrait position.
• Depending on the shooting angle of the camera, the orientation of the image may not be recorded
correctly. If the orientation of the image is not recorded correctly, you can rotate the image as shown in
page 54.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down during this period, the recorded image display disappears
and you can immediately shoot the next image.
Auto Orientation
On
Records the image with the correct orientation.
Off
Auto Orientation deactivated.
Auto Review
On
Use the Auto Review.
Off
Does not use Auto Review.
68
Settings For details on the operation 1 page 56
Clock Settings
Sets the date and time.
1 Select [ Clock Settings] from (Settings) on the HOME screen.
2 Select the date display format with v/V, then press z.
3 Select each item with b/B and set the numeric value with v/V, then press z.
4 Select [OK], then press z.
To cancel the clock setting
Select [Cancel] in step 4, then press z.
Clock Settings
69
Customizing the settings
Settings For details on the operation 1 page 56
Language Setting
Selects the language to be used to display the menu items, warnings, and messages.
Language Setting
70
Viewing images on a TV
Viewing images on a TV
You can view images on a TV screen by connecting the camera to a TV.
The connection varies according to the type of TV the camera is connected to.
Turn off both your camera and the TV before connecting the camera and the TV.
1 Connect the camera to the TV.
• Place the camera with the screen facing upwards.
• If your TV has stereo input jacks, connect the audio plug (black) of the cable for multi-use terminal to the
left audio jack.
2 Turn on the TV and set the TV/video input switch to “video”.
• For details, see the operating instructions supplied with the TV.
3 Press (Playback) to turn on the camera.
Images shot with the camera appear on the TV screen.
Press b/B on the control button to select the desired image.
• When using your camera abroad, it may be necessary to switch the video signal output to match that
of your TV system (page 64).
Viewing images by connecting your camera to a TV with the supplied
cable for multi-use terminal
1 To audio/video
input jacks
Cable for multi-use
terminal (supplied)
2 To the multi
connector
VIDEO
Ye l l o w B l a c k
AUDIO
Control button
(Playback) button
Yellow/White/Red
71
Viewing images on a TV
Viewing images on a TV
You can view an image recorded on the camera by connecting the camera to an HD (High
Definition) TV with the component cable (not supplied).
Turn off both your camera and the TV before connecting the camera and the TV.
1 Connect the camera to the TV.
• Place the camera with the screen facing upwards.
• The input jacks (Green/Blue/Red) of the component video cable (not supplied) are the same colors as the
respective terminals on the TV.
2 Turn on the TV and set the TV/video input switch to “video”.
• For details, see the operating instructions supplied with the TV.
3 Press (Playback) to turn on the camera.
Images shot with the camera appear on the TV screen.
Press b/B on the control button to select the desired image.
Viewing an image by connecting your camera to a HD TV
1 To audio/video
input jacks
Component video
cable (not supplied)
2 To the multi
connector
COMPONENT
VIDEO IN
AUDIO
Green/Blue/Red White/Red
HOME button
Control button
(Playback) button
72
Viewing images on a TV
• Set [COMPONENT] to [HD(1080i)] in [Main Settings 2] by selecting (Settings) on the HOME
screen (page 63).
• When using your camera abroad, it may be necessary to switch the video signal output to match that
of your TV system (page 64).
• You cannot view movies output in HD signal format.
On TV color systems
If you want to view images on a TV screen, you need a TV with a video input jack and the
cable for multi-use terminal. The color system of the TV must match that of your digital still
camera. Check the following lists for the TV color system of the country or region where the
camera is used.
NTSC system
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,
Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc.
PAL system
Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland,
Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal,
Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
73
Using your computer
Using your computer
Enjoying your Windows computer
For details on using a Macintosh computer, refer to “Using
your Macintosh computer” (page 90).
This section describes the English version of screen contents.
• Under Windows Vista, some names and operations may differ from
those described below.
•
Viewing images on your computer
• Viewing images saved on your computer
• Viewing photos organized by date
• Editing images
• Adding/changing Music using “Music Transfer”
• Displaying the shooting locations of still images on maps
online (To do this, your computer needs to be connected to
the Internet.)
• Creates a disc with the images shot (requires CD or DVD
disc writing drive)
• Printing or saving still images with the date
Install the software (supplied) first (page 75)
Copying images to your computer (page 76)
Enjoying images using the “Picture Motion Browser” and “Music Transfer”
(pages 83 and 89)
74
Enjoying your Windows computer
The following environment is
recommended for a computer connected to
the camera.
Recommended environment for copying
images
OS (pre-installed): Microsoft Windows
2000 Professional, Windows XP* or
Windows Vista*
• Operation is not assured in an environment
based on an upgrade of the operating
systems described above or in a multi-boot
environment.
USB jack: Provided as standard
Recommended environment for using
“Picture Motion Browser” and “Music
Transfer”
OS (pre-installed): Microsoft Windows
2000 Professional, Windows XP* or
Windows Vista*
Sound card: 16-bit stereo sound card with
speakers
CPU/Memory: Pentium III 500 MHz or
faster, 128 MB of RAM or more
(Recommended: Pentium III 800 MHz or
faster and 256 MB of RAM or more)
Software: DirectX 9.0c or later
Hard Disk: Disk space required for
installation—200 MB or more
Display: Screen resolution: 1024 × 768 dots
or more
Colors: High Color (16-bit color) or more
* 64-bit editions and Starter (Edition) are not
supported.
• The software is compatible with DirectX
technology. Installation of “DirectX” may be
required.
Notes on connecting your camera to a
computer
• Operations are not guaranteed for all the
recommended computer environments
mentioned above.
• If you connect two or more USB devices to a
single computer at the same time, some devices,
including your camera, may not operate,
depending on the types of USB devices you are
using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface
that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection
when connecting a computer, [Auto] (default
setting), [Mass Storage] and [PictBridge]
modes. This section describes the [Auto] and
[Mass Storage] as examples. For details on
[PictBridge], see page 63.
• When your computer resumes from a suspend or
sleep mode, communication between your
camera and your computer may not recover at
the same time.
Recommended computer
environment
Technical Support
Additional information on this product
and answers to frequently asked
questions can be found at the Sony
Customer Support Website.
http://www.sony.net/
75
Using your computer
Installing the software (supplied)
You can install the software (supplied)
using the following procedure.
• When using Windows 2000, do not connect the
camera to the computer before installation.
• In Windows 2000/XP, log on as Administrator.
• When the software (supplied) is installed, the
USB driver is installed automatically.
1 Turn on your computer, and insert
the CD-ROM (supplied) into the
CD-ROM drive.
The installation menu screen appears.
• If it does not appear, double-click (My
Computer)
t (SONYPICTUTIL).
• Under Windows Vista, the AutoPlay screen
may appear. Select “Run Install.exe” and
follow the instructions that appear on the
screen to proceed with the installation.
2 Click [Install].
The “Choose Setup Language” screen
appears.
3 Select the desired language, then
click [Next].
The [Location Settings] screen appears.
4 Select the [Region] and [Country/
Area], then click [Next].
When the [Welcome to the InstallShield
Wizard for SonyPicture Utility]
appears, click [Next].
The “License Agreement” screen
appears. Read the agreement carefully.
If you accept the terms of the
agreement, click the radio button next to
[I accept the terms of the license
agreement] and then click [Next].
5 Follow the instructions on the
screen to complete the
installation.
• When the restarting confirmation message
appears, restart the computer following the
instructions on the screen.
• DirectX may be installed depending on
system environment of your computer.
6 Remove the CD-ROM after the
installation is complete.
After you install the software, a shortcut
icon for the customers registration website
is created on the desktop.
Once you register on the website, you can
get secure and useful customer support.
http://www.sony.net/registration/di
76
Copying images to your computer
This section describes the process using a
Windows computer as an example.
You can copy images from the camera to
your computer as follows.
For a computer with a Memory Stick slot
Remove the “Memory Stick Duo” from the
camera and insert it in the Memory Stick
Duo Adaptor. Insert the Memory Stick Duo
Adaptor in the computer and copy the
images.
• Even when you are using Windows 95/98/98
SecondEdition/NT/Me, you can copy images by
inserting the “Memory Stick Duo” into the
Memory Stick slot on your computer.
• If the “Memory Stick PRO Duo” is not
recognized, see page 103.
For a computer without a Memory Stick
slot
Follow Stages 1 through 4 on pages 76 to
80 to copy images.
• When you are using Windows 2000, install the
software (supplied) before proceeding. With
Windows XP, installation is unnecessary.
• The screen displays shown in this section are the
examples for copying images from “Memory
Stick Duo”.
With Windows 95/98/98 SecondEdition/
NT/Me:
This camera is not compatible with these
version of the Windows operating system.
When you use a computer without a
Memory Stick slot, use a commercially
available Memory Stick Reader/Writer to
copy images from a “Memory Stick Duo”
to your computer.
To copy images in the internal memory to
your computer, copy the images to a
“Memory Stick Duo” first, then copy them
to your computer.
1 Insert a “Memory Stick Duo” with
recorded images into the camera.
• When copying images in the internal
memory, this step is unnecessary.
2 Insert the sufficiently charged
battery pack in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (not supplied) and the
USB, A/V, DC IN cable for multi-
use terminal (not supplied).
• When you copy images to your computer
using a battery pack with little remaining
charge, copying may fail or image data may
become corrupted if the battery pack shuts
down too soon.
3 Press (Playback), then turn on
the computer.
Stage 1: Preparing the camera
and the computer
(Playback)
button
77
Using your computer
Copying images to your computer
• With Windows XP/Vista, the AutoPlay wizard
appears on the desktop.
“Connecting to Mass Storage...” appears on
the screen of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
* is displayed on the screen during the
communication session.
Do not operate the computer while the indicator
is displayed. When the indicator changes to
, you can start using the computer
again.
• If “Connecting to Mass Storage...” does not
appear, set [USB Connect] to [Mass Storage]
(page 63).
• When the software (supplied) has been installed,
the [Import Images] screen (page 84) may be
displayed. In this case, you can import images
directly using “Picture Motion Browser”.
• For Windows 2000, follow the procedure
explained in “Stage 3-B: Copying images to a
Computer” on page 78.
• For Windows XP/Vista, when the wizard screen
does not appear automatically, follow the
procedure explained in “Stage 3-B: Copying
images to a Computer” on page 78.
This section describes an example of
copying images to a “My Documents”
folder.
1 After making a USB connection in
Stage 2, click [Copy pictures to a
folder on my computer using
Microsoft Scanner and Camera
Wizard]
t [OK] as the wizard
screen appears automatically on
the desktop.
The “Scanner and Camera Wizard”
screen appears.
2 Click [Next].
The images saved on the “Memory
Stick Duo” of the camera appear.
Stage 2: Connecting the camera
and your computer
Cable for multi-
use terminal
1 To a USB
jack
2 To the multi
connector
Access
indicators*
Stage 3-A: Copying images to a
computer
1
2
78
Copying images to your computer
• If no “Memory Stick Duo” is inserted,
images in the internal memory appear.
3 Click the check box of unwanted
images to remove the checkmark
so they are not copied, then click
[Next].
The “Picture Name and Destination”
screen appears.
4 Select a name and destination for
the images, then click [Next].
Image copying starts. When the copying
is completed, the “Other Options”
screen appears.
• This section describes an example of
copying images to the “My Documents”
folder.
5 Click the radio button next to
[Nothing. I’m finished working
with these pictures] to select it,
then click [Next].
The “Completing the Scanner and
Camera Wizard” screen appears.
6 Click [Finish].
The wizard screen closes.
• To continue copying other images,
disconnect the cable for multi-use terminal
(page 80). Then follow the procedure
explained in “Stage 2: Connecting the
camera and your computer” on page 77.
• For Windows XP, follow the procedure
explained in “Stage 3-A: Copying images to a
computer” on page 77.
This section describes an example of
copying images to the “My Documents”
folder.
1
2
1
2
Stage 3-B: Copying images to a
Computer
1
2
79
Using your computer
Copying images to your computer
1 Double-click [My Computer] t
[Removable Disk]
t [DCIM].
• If the “Removable Disk” icon is not
displayed, see page 104.
2 Double-click the folder where the
image files you want to copy are
stored.
Then, right-click an image file to
display the menu and click
[Copy].
• On the storage destination of the image
files, see (page 81).
3 Double-click the [My Documents]
folder. Then, right-click on the
“My Documents” window to
display the menu and click
[Paste].
The image files are copied to the “My
Documents” folder.
• When an image with the same file name
exists in the copy destination folder, the
overwrite confirmation message appears.
When you overwrite an existing image with
a new one, the original file data is deleted.
To copy an image file to the computer
without overwriting, change the file name to
a different name and then copy the image
file. However, note that if you change the
file name (page 82), you may not be able to
playback that image with your camera.
2
1
1
2
80
Copying images to your computer
This section describes the procedure for
viewing copied images in the “My
Documents” folder.
1 Click [Start] t [My Documents].
The contents of the “My Documents”
folder are displayed.
• If you are not using Windows XP,
double-click [My Documents] on the
desktop.
2 Double-click the desired image
file.
The image is displayed.
Perform the procedures listed below
beforehand when:
• Disconnecting the cable for multi-use terminal
• Removing a “Memory Stick Duo”
• Inserting a “Memory Stick Duo” into the
camera after copying images from the internal
memory
• Turning off the camera
1 Double-click on the tasktray.
2 Click (USB Mass Storage Device) t
[Stop].
3 Confirm the device on the confirmation
window, then click [OK].
4 Click [OK].
The device is disconnected.
•Step 4 is unnecessary for Windows XP.
Stage 4: Viewing images on
your computer
1
2
To delete the USB connection
Double-click here
81
Using your computer
Copying images to your computer
The image files recorded with your camera
are grouped as folders on the “Memory
Stick Duo”.
Example: viewing folders on Windows XP
A Folder containing image data recorded
using a camera not equipped with the
folder creating function
B Folder containing image data recorded
using this camera
When no new folders are created, there are
folders as follows:
– “Memory Stick Duo”; “101MSDCF” only
– Internal memory; “101_SONY” only
• You cannot record any images to the
“100MSDCF” folder. The images in these
folders are available only for viewing.
• You cannot record/playback any images to the
“MISC” folder.
• Image files are named as follows. ssss
stands for any number within the range from
0001 to 9999. The numerical portions of the
name of a movie file recorded in movie mode
and its corresponding index image file are the
same.
– Still image files: DSC0ssss.JPG
– Movie files: MOV0ssss.MPG
– Index image files that are recorded when you
record movies: MOV0ssss.THM
• For more information about folders, see pages
55 and 58.
Image file storage destinations
and file names
82
Viewing image files stored on a computer with
your camera (using a “Memory Stick Duo”)
This section describes the process using a
Windows computer as an example.
When an image file copied to a computer
no longer remains on a “Memory Stick
Duo”, you can view that image again on the
camera by copying the image file on the
computer to a “Memory Stick Duo”.
• Step 1 is not necessary if the file name set with
your camera has not been changed.
• You may be unable to playback some images
depending on the image size.
• When an image file has been processed by a
computer or when the image file was recorded
using a model other than that of your camera,
playback on your camera is not guaranteed.
• When there is no folder, create a folder with
your camera (page 58) first, and then copy the
image file.
1 Right-click the image file, then
click [Rename]. Change the file
name to “DSC0ssss”.
Enter a number from 0001 to 9999 for
ssss.
• If the overwrite confirmation message
appears, enter a different number.
• An extension may be displayed depending
on the computer settings. The extension for
still images is JPG, and the extension for
movies is MPG. Do not change the
extension.
2 Copy the image file to the
“Memory Stick Duo” folder in the
following order.
1Right-click the image file, then click
[Copy].
2Double-click [Removable Disk] or
[Sony MemoryStick] in [My
Computer].
3Right-click the [sssMSDCF] folder
in the [DCIM] folder, then click [Paste].
• sss stands for any number within the
range from 100 to 999.
1
2
83
Using your computer
Using the “Picture Motion Browser” (supplied)
You can use still images and movies from
the camera more than ever by taking
advantage of the software.
This section summarizes the “Picture
Motion Browser” and gives the basic
instructions.
With the “Picture Motion Browser” you
can:
• Import images shot with the camera and display
them on the computer.
• Organize images on the computer on a calendar
by shooting date to view them.
• Retouch (Red Eye Correction, etc.), print, and
send still images as e-mail attachments, change
the shooting date and more.
• Still images can be printed or saved with the
date.
• You can create a data disc using a CD burner
drive or DVD burner drive.
• For details on the “Picture Motion Browser”,
refer to the Help.
To access the Help, click [Start] t [All
Programs] (in Windows 2000, [Programs])
t [Sony Picture Utility] t [Help] t
[Picture Motion Browser].
Starting the “Picture Motion Browser”
Double-click the (Picture Motion
Browser) icon on the desktop.
Or, from the Start menu: Click [Start] t
[All Programs] (in Windows 2000,
[Programs]) t [Sony Picture Utility] t
[Picture Motion Browser].
• The confirmation message of the Information
tool appears on the screen when starting the
“Picture Motion Browser” for the first time.
Select [Start]. This function informs you of
news, such as software updates. You can change
the setting later.
Exiting the “Picture Motion Browser”
Click button in the top right corner of
the screen.
Follow these steps to import and view
images from the camera.
Importing images
1 Make sure “Media Check Tool”* is
running.
Look for a
(Media Check Tool) icon in
the taskbar.
* “Media Check Tool” is a program that
automatically detects and imports images
when a “Memory Stick” is inserted or when
the camera is connected.
• If there is no icon: Click [Start] t [All
Programs] (in Windows
2000, [Programs])
t [Sony Picture Utility] t [Tools] t
[Media Check Tool].
“Picture Motion Browser”
overview
Starting and exiting the “Picture
Motion Browser”
Basic instructions
84
Using the “Picture Motion Browser” (supplied)
2 Connect the camera to your
computer with the cable for multi-
use terminal.
After the camera is automatically
detected, the [Import Images] screen is
displayed.
• If you use the Memory Stick slot, refer to
page 76.
• In Windows XP, if the AutoPlay Wizard
appears, close it.
3 Import the images.
To start importing images, click the
[Import] button.
By default, images are imported into a
folder created in “My Pictures” that is
named with the date of importing.
• For instructions on changing the “Folder to
be imported”, refer to page 87.
Viewing images
1 Checking imported images
When importing is complete, the
“Picture Motion Browser” starts.
Thumbnails of the imported images are
displayed.
• The “My Pictures” folder is set as the
default folder in “Viewed folders”.
• You can double-click a thumbnail to display
the image by itself.
2 Viewing images in “Viewed
folders” arranged by shooting
date on a calendar
1Click the [Calendar] tab.
Years when images were shot are listed.
2Click the year.
Images shot that year are displayed,
arranged on the calendar by shooting
date.
3To display images by month, click the
desired month.
Thumbnails of images shot that month
are displayed.
4To display images by time, click the
desired date.
Thumbnails of images shot that day are
displayed, arranged by hour.
85
Using your computer
Using the “Picture Motion Browser” (supplied)
Year display screen
Month display screen
Hour display screen
• To list images from a particular year or
month, click that period on the left of the
screen.
3 Displaying individual images
On the hour display screen, double-click
a thumbnail to display the image by
itself in a separate window.
• You can edit displayed images by clicking
the button in the toolbar.
Displaying images in full-screen
mode
To display a slide show of current
images in full-screen mode, click the
button.
• To play or pause the slide show, click the
button on the lower left of the screen.
• To stop the slide show, click the button
on the lower left of the screen.
1
2
3
4
86
Using the “Picture Motion Browser” (supplied)
Images can be saved in CD or DVD as a
data disc.
• CD burner drive or DVD burner drive
required.
• The following disc can be used for
creating a data disc.
–CD–R/RW (12 cm)
–DVD±R/RW (12 cm)
–DVD+R DL (12 cm)
–DVD–R DL (12 cm)
1 Select images to save on the disc.
• To select consecutive images, click the first
image, then press and hold down “Shift”
key while you click the last image.
• To select two or more non-consecutive
images, press and hold down “Ctrl” key
while clicking images.
2 Click the button on the tool
bar.
The [Create Data Disc] display appears.
3 Click [Start].
4 Follow the display instructions to
proceed with creating the data
disc.
• To add desired images, drag and drop on the
[Create Data Disc] display.
Selecting all images in a folder
Click the [folders] tab, then right-click on
the desired folder icon and select [Create
Data Disc]. All images in a folder can be
selected.
If your still images have position
information, you can see the images on
maps online with Map View.
• To use the Map View function, your
computer needs to be connected to the
Internet.
1 Select a thumbnail marked with
.
2 Click .
The Map View main window appears.
• Maps and satellite images powered by
Google Maps mapping service.
• You can later add position information on
the still images, using the Map View. For
details, see the Help of Map View.
Creating a data disc Using Map View to display still
images on a map
87
Using your computer
Using the “Picture Motion Browser” (supplied)
Preparing images stored on the
computer for viewing
To view them, register the folder that
contains the images as one of the “Viewed
folders”.
1 Click on the main screen, or
choose [Register Folders to View]
from the [File] menu.
The settings screen for “Viewed folders”
registration is displayed.
2 Specify the folder with images for
importing to register the folder as
one of the “Viewed folders”.
3 Click [OK].
The image information is registered in the
database.
• Images in any subfolders of “Viewed
folders” are also registered.
Changing the “Folder to be imported”
To change the “Folder to be imported”,
access the “Import Settings” screen.
1 Choose [Import Settings] t
[Location for Imported Images]
from the [File] menu.
The “Location for Imported Images” screen is
displayed.
2 Choose the “Folder to be
imported”.
• You can specify the “Folder to be
imported” from folders registered as
“Viewed folders.”
Updating image registration information
To update image information, choose
[Update Database] from the [Tools] menu.
• Updating the database may take a while.
• If you rename image files or folders in
“Viewed folders”, they cannot be
displayed with this software. In this case,
update the database.
Saving images with the date
1 Double-click an image to display it.
2 Click and select [Insert Date] from
the drop-down list.
3 Select your desired color and position,
and then click [OK].
4 Click to save.
Printing images with the date
1 Select the still image you want to print.
2 Click on the toolbar.
3 Click the check box of [Print date taken]
in Print Options.
4 Click [Print].
Other functions
88
Using the “Picture Motion Browser” (supplied)
1 Click [Start] t [Control Panel] (in
Windows 2000, [Start] t [Settings] t
[Control Panel]), then double-click [Add/
Remove Programs].
2 Select [Sony Picture Utility], then click
[Remove] (in Windows 2000, [Change/
Remove]) to execute the uninstallation.
To uninstall the “Picture Motion
Browser”
89
Using your computer
Using the “Music Transfer” (supplied)
You can change the Music files that are
preset at the factory with desired Music
files using “Music Transfer” in the CD-
ROM (supplied). Also, you can delete or
add these files whenever you want.
The music formats you can transfer with
“Music Transfer” are listed below:
• MP3 files stored on the hard drive of your
computer
• Music on CDs
• Preset-music saved on this camera
1 Press HOME to display the HOME
screen.
2 Select (Printing, Other) with
b/B on the control button, select
[ Music Tool] with v/V, then
press z.
3 Select [Download Music] with
v/V/b/B, then press z.
The message “Connect to PC” appears.
4 Make a USB connection between
the camera and your computer.
5 Start “Music Transfer”.
6 Follow the instructions on the
screen to add/change Music files.
• To restore the music preset at the factory
to the camera:
1 Perform [Format Music] in step 3.
2 Execute [Restore defaults] on “Music
Transfer.”
All Music files return to the preset-music, and
[Music] in the [Slide Show] menu is set to
[Off].
3 Select a suitable Music file for the slide
show effect (page 49).
You can reset the Music files to the preset
ones using [Initialize] (page 62), however,
other settings will also be reset.
• For details on using “Music Transfer”, see the
on-line help in “Music Transfer”.
Adding/Changing Music using
“Music Transfer”
90
Using your Macintosh computer
You can copy images to your Macintosh
computer.
• “Picture Motion Browser” is not compatible
with Macintosh computers.
The following environment is
recommended for a computer connected to
the camera.
Recommended environment for copying
images
OS (pre-installed): Mac OS 9.1/9.2/ Mac
OS X(v10.1 to v10.4)
USB jack: Provided as standard
Recommended environment for using
“Music Transfer”
OS (pre-installed): Mac OS X (v10.3 to
v10.4)
CPU: iMac, eMac, iBook, PowerBook, Power
Mac G3/G4/G5 series, Mac mini
Memory: 64 MB or more (128 MB or more is
recommended)
Hard Disk: Disk space required for
installation—approximately 250 MB
Notes on connecting your camera to a
computer
• Operations are not guaranteed for all the
recommended computer environments
mentioned above.
• If you connect two or more USB devices to a
single computer at the same time, some devices,
including your camera, may not operate
depending on the types of USB devices you are
using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface
that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection
when connecting a computer, [Auto] (default
setting), [Mass Storage] and [PictBridge]
modes. This section describes the [Auto] and
[Mass Storage] as examples. For details on
[PictBridge], see page 63.
• When your computer resumes from the suspend
or sleep mode, communication between your
camera and your computer may not recover at
the same time.
1 Prepare the camera and a
Macintosh computer.
Perform the same procedure as
described in “Stage 1: Preparing the
camera and the computer” on page 76.
2 Connect the cable for multi-use
terminal.
Perform the same procedure as
described in “Stage 2: Connecting the
camera and your computer” on page 77.
3 Copy image files to the Macintosh
computer.
1Double-click the newly recognized icon
t [DCIM] t the folder where the
images you want to copy are stored.
2Drag and drop the image files to the
hard disk icon.
The image files are copied to the hard
disk.
• For details on the storage location of the
images and file names, see page 81.
Recommended computer
environment
Copying and viewing images on
a computer
91
Using your computer
Using your Macintosh computer
4 View images on the computer.
Double-click the hard disk icon
t the
desired image file in the folder
containing the copied files to open that
image file.
Perform the procedures listed below
beforehand when:
• Disconnecting the cable for multi-use terminal
• Removing a “Memory Stick Duo”
• Inserting a “Memory Stick Duo” into the
camera after copying images from the internal
memory
• Turning off the camera
Drag and drop the drive icon or the icon
of the “Memory Stick Duo” to the
“Trash” icon.
The camera is disconnected from the
computer.
You can change the Music files that are
preset at the factory with desired Music
files. Also, you can delete or add these files
whenever you want.
The music formats you can transfer with
“Music Transfer” are listed below:
• MP3 files stored on the hard drive of your
computer
• Music on CDs
• Preset-music saved on this camera
To install “Music Transfer”
• Shut down all other application software before
you install “Music Transfer”.
• For installation, you need to log on as
Administrator.
1 Turn on your Macintosh computer, and
insert the CD-ROM (supplied) into the
CD-ROM drive.
2 Double-click (SONYPICTUTIL).
3 Double-click the [MusicTransfer.pkg] file
in [MAC] folder.
The installation of the software starts.
To add/change Music files
See “Adding/Changing Music using “Music
Transfer”” on page 89.
To delete the USB connection
Adding/Changing Music using
“Music Transfer”
Technical Support
Additional information on this product
and answers to frequently asked
questions can be found at the Sony
Customer Support Website.
http://www.sony.net/
92
Printing still images
How to print still images
When you print images shot in [16:9] mode, both
edges may be cut off, so be sure to check before
printing (page 106).
You can print images by connecting the camera directly to a
PictBridge compliant printer.
You can print images with a “Memory Stick” compliant printer.
For details, see the operating instructions supplied with the
printer.
You can copy images to a computer using the supplied “Picture
Motion Browser” software and print the images.
You can insert the date on the image and print it (page 87).
You can take a “Memory Stick Duo” containing images shot with
your camera to a photo printing service shop. You can make a
(Print order) mark on images which you want to print out in
advance.
Printing directly using a PictBridge compliant printer (page 93)
Printing directly using a “Memory Stick” compliant printer
Printing using a computer
Printing at a shop (page 96)
93
Printing still images
Printing images directly using a PictBridge
compliant printer
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
• You cannot print movies.
• If the indicator flashes on the screen of the
camera (error notification), check the connected
printer.
Prepare the camera to connect it to the
printer with the cable for multi-use
terminal. When connecting the camera to a
printer that is recognized when [USB
Connect] is set to [Auto], Stage 1 is
unnecessary.
• It is recommended to use a fully charged battery
pack to prevent the power from turning off
partway through printing.
1 Press HOME to display the HOME
screen.
2 Select (Settings) with b/B, and
select [ Main settings] with v/V,
then press z.
3 Select [Main Settings 2] with v/V/
b/B, and select [USB Connect],
then press z.
4 Select [PictBridge] with v/V, then
press z.
The USB mode is set.
Stage 1: Preparing the camera
Control
button
HOME
button
MENU
button
94
Printing images directly using a PictBridge compliant printer
1 Connect the camera to the printer.
2 Press (Playback) and turn on
your camera and the printer.
After the connection is made,
the indicator appears.
The camera is set to playback mode, then an
image and the print menu appear on the
screen.
Select [This Image] or [Multiple
Images] with v/V, then press z.
When you select [This Image]
You can print the selected image. Move
on to Stage 4.
When you select [Multiple Images]
You can print multiple selected images.
1Select the image you want to print with
b/B, then press z.
mark appears on the selected image.
2Press MENU to display the menu.
3Select [OK] with the control button,
then press z.
• After you select [Multiple Images] on the
index screen, you can print all the images in
a folder by selecting the folder selection bar
with b and attaching a mark on the
folder.
1 Select print settings with the
control button.
[Quantity]
When the [Layout] is set to [1-up/
Borderless] or [1-up/Border]:
Select the number of sheets of an image
that you want to print. The image will
be printed as a single image.
Stage 2: Connecting the camera
to the printer
1 To t h e
USB jack
2 To the multi
connector
Cable for multi-use
terminal
Stage 3: Selecting images you
want to print
Stage 4: Printing
95
Printing still images
Printing images directly using a PictBridge compliant printer
When the [Layout] is not set to [1-up/
Borderless] or [1-up/Border]:
Select the number of sets of images that
you want to print as an index image. If
you selected [This Image] in step 1,
select the number of the same image
you want to print side by side on a sheet
as an index image.
• The designated number of images may not
all fit onto a single sheet depending on the
quantity of images.
[Layout]
Selects the number of image you want
to print side by side on a sheet.
[Size]
Select the size of the printing sheet.
[Date]
Select [Day & Time] or [Date] to insert
the date and time on images.
•When you choose [Date], the date will be
inserted in the order you select (page 68).
This function may not be provided
depending on the printer.
2 Select [OK] with v, then press z.
The image is printed.
• Do not disconnect the cable for multi-use
terminal while the (PictBridge
Connecting) indicator appears on the screen.
To print other images
Select [Multiple Images], then perform the
process again stage 3, 4.
Make sure the screen has returned to Stage
2, and disconnect the cable for multi-use
terminal from the camera.
indicator
Stage 5: Completing the printing
96
Printing at a shop
You can take a “Memory Stick Duo”
containing images shot with your camera to
a photo printing service shop. As long as
the shop supports photo printing services
conforming to the DPOF, you can make a
(Print order) mark on images in
advance so that you do not need to reselect
them when you print them out at the shop.
• You cannot print images stored in the internal
memory at a print shop directly from the
camera. Copy the images to a “Memory Stick
Duo”, then take the “Memory Stick Duo” to the
print shop.
What is DPOF?
DPOF (Digital Print Order Format) is a
function allowing you to make a
(Print
order) mark on images of “Memory Stick
Duo” that you want to print out later.
• You can also print the images with the
(Print order) mark using a printer that conforms
to the DPOF (Digital Print Order Format)
standard or using a PictBridge compliant printer.
• You cannot mark movies.
When taking a “Memory Stick Duo” to a
shop
• Consult your photo printing service shop as to
what types of “Memory Stick Duo” they handle.
• If a “Memory Stick Duo” is not handled by your
photo printing service shop, copy the images
you want to print out to other medium such as a
CD-R and take it to the shop.
• Be sure to take the Memory Stick Duo Adaptor
with it.
• Before you take image data to a shop, always
copy (back up) your data to a disk.
• You cannot set the number of prints.
• When you want to superimpose dates on
images, consult your photo printing service
shop.
1 Press (Playback).
2 Select the image you want to
print.
3 Press MENU to display the menu.
4 Select [DPOF] with v/V on the
control button and select [This
Image] with b/B, then press z.
(Print order) mark is attached to
the image.
To remove the mark
Select the images from which you want to
remove the mark, then press z in step 3.
Marking a selected image
Control
button
MENU button
(Playback) button
97
Printing still images
Printing at a shop
1 Press MENU while displaying
images in single-image mode or
in index mode.
2 Select [DPOF] with v/V and select
[Multiple Images] with b/B, then
press z.
3 Select an image to mark with the
control button, then press z.
mark is attached to the selected image.
4 Press MENU.
5 Select [OK] with v, then press z.
mark appears on the screen.
To cancel the selection
To cancel, select [Exit] in step 5, then press
z.
To remove the mark
Select the images that you want to remove
the marks, then press z in step 3.
To mark all the images in the folder
In step3, move the frame to the folder
selection bar with b, then press z during
the index mode.
mark is attached to the selected folder
and all the images.
Selecting and marking the
images
Single Image
Index Display
Single Image
Index Display
98
Troubleshooting
Troubleshooting
If you experience trouble with your camera, try the following solutions.
Please understand that you give your consent that the contents of the internal memory, Music
files may be checked when you send your camera to be repaired.
1 Check the items on pages 99 to 108.
If a code such as “C/E:ss:ss” appears on the screen, see page 109.
2 Remove the battery pack, and insert the battery pack again after about one
minute, and turn on the power.
3 Initialize the settings (page 62).
4 Consult your Sony dealer or local authorized Sony service facility.
Battery pack and power 99
Shooting still images/movies 99
Viewing images 102
Deleting/Editing images 103
Computers 103
Picture Motion Browser 105
“Memory Stick Duo” 106
Internal memory 106
Printing 106
PictBridge compliant printer 107
Others 108
Click one of the following items to jump to the page explaining the symptom and cause or the
appropriate corrective action.
99
Troubleshooting
Troubleshooting
The battery pack cannot be inserted.
• Insert the battery pack correctly to push the battery eject lever.
Cannot turn on the camera.
• After installing the battery pack into the camera, it may take a little while to get the camera
powered.
• Install the battery pack correctly.
• The battery pack is discharged. Insert charged battery pack.
• The battery pack is dead (page 115). Replace it with a new one.
• Use a recommended battery pack.
The power turns off suddenly.
• If you do not operate the camera for about three minutes while the power is on, the camera
turns off automatically to prevent wearing down the battery pack. Turn on the camera again.
• The battery pack is dead (page 115). Replace it with a new one.
The battery remaining indicator is incorrect.
• This phenomenon occurs when you use the camera in an extremely hot or cold location.
• The displayed battery remaining differs from the current one. Fully discharge and then charge
the battery pack to correct the display.
• The battery pack is discharged. Insert a charged battery pack.
• The battery pack is dead (page 115). Replace it with a new one.
Cannot charge the battery pack.
• You cannot charge the battery pack using the AC Adapter (not supplied).
The screen does not turn on even when the power is turned on.
• Turn on the screen (page 18).
Your camera cannot record images.
• Check the free capacity of the internal memory or “Memory Stick Duo”. If it is full, do one of
the following:
– Delete unnecessary images (page 31).
– Change the “Memory Stick Duo”.
• You are using the “Memory Stick Duo” with a write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 113).
• You cannot record images while charging the flash.
• When shooting a still image, set the mode dial to a position other than .
Battery pack and power
Shooting still images/movies
100
Troubleshooting
• Set the mode dial to when shooting movies.
• The image size is set to [640(Fine)] when recording movies. Do one of the following:
– Set the image size to other than [640(Fine)].
– Insert a “Memory Stick PRO Duo”.
Movie recording stops during shooting.
• Movie recording stops automatically when the file size of the movie reaches approximately
2GB.
This subject is not visible on the screen.
• Your camera is set to the playback mode. Press to change to the recording mode
(page 29).
Anti-blur function does not work.
• The anti-blur function does not work when appears on the display.
• The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
Recording takes a long time.
• The NR slow shutter function is activated (page 15). This is not a malfunction.
The image is out of focus.
• The subject is too close. Shoot in (Macro) recording mode. Make sure to position the lens
farther away from the subject than the shortest shooting distance, approximately 4 cm
(1 5/8 inches) (W)/35 cm (13 7/8 inches) (T), when shooting (page 24).
• (Twilight mode) or (Landscape mode) is selected in the Scene mode when shooting still
images.
• The Focus preset function is selected. Select the auto focus mode (page 42).
• Refer to “If the subject is out of focus” on page 44.
Zoom does not work.
• The smart zoom cannot be used when the image size is set to [8M] (DSC-W90), [7M] (DSC-
W80/W85) or [3:2].
• The digital zoom cannot be used while shooting movies.
• You cannot change the zoom scale while shooting a movie.
• When [Face Detection] is set to [On], you cannot use the Digital Zoom.
101
Troubleshooting
Troubleshooting
The flash does not work.
• The flash is set to (Flash forced off) (page 24).
• You cannot use the flash when:
– [REC Mode] is set to [Burst] or Exposure Bracket (page 39).
– (High Sensitivity mode) or (Twilight mode) is selected in the Scene mode (page 28).
– Shooting movies.
• Set the flash to (Flash forced on) when (Landscape mode), (Beach mode), or
(Snow mode) is selected in the Scene mode (page 24).
Fuzzy specks appear in images shot using the flash.
• Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
The close-up shoot function (Macro) does not work.
• (Twilight mode) or (Landscape mode) is selected in the Scene mode (page 28).
The date and time are not displayed on LCD screen.
• While shooting, the date and time are not displayed. They are displayed only during playback.
Cannot insert dates on image.
• This camera does not have a feature for superimposing dates on images (page 107). By using
“Picture Motion Browser”, you can print or save images with the date (page 87).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
• The exposure is incorrect. Correct the exposure (page 41).
The screen is too dark or too bright.
• Adjust the brightness of the LCD backlight (page 18).
The image is too dark.
• You are shooting a subject with a light source behind the subject. Select the metering mode
(page 42) or adjust the exposure (page 41).
• Turn on the screen (page 18).
The image is too bright.
• Adjust the exposure (page 41).
The image colors are not correct.
• Set [Color Mode] to [Normal] (page 40).
102
Troubleshooting
Vertical streaks appear when you are shooting a very bright subject.
• The smear phenomenon is occurring and white, black, red, or purple streaks appear on the
image. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
• The camera is attempting to increase the visibility of the screen by temporarily brightening
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
• Set [Red Eye Reduction] to [On] (page 46).
• Shoot the subject at a distance closer than the flash range using the flash.
• Light the room and shoot the subject.
• Retouch the image using [Red Eye Correction] (page 52).
Dots appear and remain on the screen.
• This is not a malfunction. These dots are not recorded (page 2).
The image seen through the finder does not match with the actual recordable
range.
• The parallax phenomenon is occurring when the subject is close. In this case, to confirm the
recordable range, use the LCD screen.
• Images cannot be confirmed through the finder while the digital zoom is in use.
Cannot shoot images in succession.
• The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (page 31).
• The battery level is low. Install charged battery pack.
Your camera cannot playback images.
• Press (Playback) button (page 29).
• The folder/file name has been changed on your computer (page 82).
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection (page 80).
The date and time are not displayed.
• v (DISP) button is turned off (page 18).
Viewing images
103
Troubleshooting
Troubleshooting
The image appears rough right after playback starts.
• The image may appear rough right after playback starts due to image processing. This is not a
malfunction.
The image does not appear on the TV screen.
• Check [Video Out] to see if the video output signal of your camera is set to the color system of
your TV (page 64).
• Check whether the connection is correct (page 70).
• If the USB connector of the cable for multi-use terminal is connected to another device,
disconnect it (page 80).
Your camera cannot delete an image.
• Cancel the protection (page 53).
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 113).
You have deleted an image by mistake.
• Once you have deleted an image, you cannot restore it. We recommend that you protect
images (page 53), or use the “Memory Stick Duo” with the write-protect switch and set the
switch to the LOCK position (page 113) to prevent accidental erasure.
You do not know if the OS of your computer is compatible with the camera.
• Check “Recommended computer environment” on page 74 for Windows, and page 90 for
Macintosh.
“Memory Stick PRO Duo” is not recognized by a computer with a “Memory
Stick” slot.
• Check that the computer and the Memory Stick Reader/Writer support “Memory Stick PRO
Duo”. Users of computers and Memory Stick Readers/Writers made by manufacturers other
than Sony should contact those manufacturers.
• If “Memory Stick PRO Duo” is not supported, connect the camera to the computer (pages 77
and 90). The computer recognizes the “Memory Stick PRO Duo”.
Your computer does not recognize your camera.
• Turn on the camera.
• When the battery level is low, install the charged battery pack or use the AC adaptor (not
supplied) (page 76).
• Set [USB Connect] to [Mass Storage] (page 63).
• Use the cable for multi-use terminal (supplied) (page 77).
Deleting/Editing images
Computers
104
Troubleshooting
• Disconnect the cable for multi-use terminal from both the computer and the camera, and
connect it again firmly.
• Disconnect all equipment other than the camera, the keyboard and the mouse from the USB
connectors of your computer.
• Connect the camera directly to your computer without passing through a USB hub or other
device (page 77).
• The software (supplied) is not installed. Install the software (page 75).
• Your computer does not properly recognize the device because you connected the camera and
your computer with the cable for multi-use terminal before you install the software (supplied).
Delete the erroneously recognized device from your computer, then install the USB driver
(see the next item).
The “Removable disk” icon does not appear on the computer screen when you
connect your computer to the camera.
• Follow the procedure below to install the USB driver again. The following procedure is for a
Windows computer.
1 Right-click [My Computer] to display the menu, then click [Properties].
The “System Properties” screen appears.
2 Click [Hardware] t [Device Manager].
The “Device Manager” appears.
3 Right-click [ Sony DSC], then click [Uninstall] t [OK].
The device is deleted.
4 Install the software (page 75).
A USB driver is also installed.
You cannot copy images.
• Connect the camera and your computer correctly making a USB connection (page 77).
• Follow the designated copy procedure for your OS (pages 77 and 90).
• When you shoot images with a “Memory Stick Duo” formatted by a computer, you may not
be able to copy the images to a computer. Shoot using a “Memory Stick Duo” formatted by
your camera (page 58).
After making a USB connection, “Picture Motion Browser” does not start
automatically.
• Start “Media Check Tool” (page 83).
• Make the USB connection after the computer is turned on (page 77).
The image cannot be played back on a computer.
• If you are using “Picture Motion Browser”, refer to the Help.
• Consult the computer or software manufacturer.
105
Troubleshooting
Troubleshooting
The image and sound are interrupted by noise when you view a movie on a
computer.
• You are playing back the movie directly from the internal memory or the “Memory Stick
Duo”. Copy the movie to the hard disk of your computer, then playback the movie from the
hard disk (page 76).
You cannot print an image.
• Refer to the operation manual of the printer.
Images once copied to a computer cannot be viewed on the camera.
• Copy them to a folder recognized by the camera, such as “101MSDCF” (page 81).
• Follow the correct procedures (page 82).
Images are not displayed correctly with “Picture Motion Browser”.
• Make sure the folder of the images is registered in “Viewed folders”. If the images are not
displayed even if the folder is registered in “Viewed folders”, update the database (page 87).
You cannot find images imported with “Picture Motion Browser”.
• Look in the “My Pictures” folder.
• If you have changed the default settings, refer to “Changing the “Folder to be imported”” on
page 87 and check what folder is used for importing.
You want to change the “Folder to be imported”.
• Access the “Import Settings” screen to change “Folder to be imported”. You can specify a
different folder after using “Picture Motion Browser” to register it in “Viewed folders”
(page 87).
The date of all imported images is displayed differently from the date on the
calendar.
• The date on the camera is not set correctly. Set the date and time correctly (page 68).
is displays on the screen.
• The recorded data is outdated, due to changing or deleting of the name of an image or a folder.
Select [Update Database] from the [Tools] menu, and execute.
Picture Motion Browser
106
Troubleshooting
Cannot insert a “Memory Stick Duo”.
• Insert it in the correct direction.
Cannot format a “Memory Stick Duo”.
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 113).
You have formatted a “Memory Stick Duo” by mistake.
• All the data on the “Memory Stick Duo” is deleted by formatting. You cannot restore it. We
recommend that you set the write-protect switch on the “Memory Stick Duo” to the LOCK
position to prevent accidental erasure (page 113).
Cannot playback or record images using the internal memory.
• There is a “Memory Stick Duo” inserted in the camera. Remove it.
Cannot copy the data stored in the internal memory to a “Memory Stick Duo”.
• The “Memory Stick Duo” is full. Check the capacity (64 MB or more recommended).
Cannot copy the data on the “Memory Stick Duo” or the computer to the
internal memory.
• Data on a “Memory Stick Duo” or a computer cannot be copied to the internal memory.
Also see “PictBridge compliant printer” (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
Especially when you print an image shot with the image size set to [16:9], the lateral end of
the image may be cut off.
• When printing images using your own printer, cancel the trimming or borderless settings.
Consult the printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether they can print the
images without cutting off both edges.
“Memory Stick Duo”
Internal memory
Printing
107
Troubleshooting
Troubleshooting
Cannot print images with the date.
• Using “Picture Motion Browser”, you can print images with date (page 87).
• This camera does not have a feature for superimposing dates on images. However, because the
images shot with the camera include information on the recording date, you can print images
with the date superimposed if the printer or the software can recognize Exif information. For
compatibility with Exif information, consult the manufacturer of the printer or the software.
• When you print images at a shop, images can be printed with the date if you ask them to do so.
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB Connect] to [PictBridge] (page 63).
• Disconnect and connect the cable for multi-use terminal again. If an error message is
indicated on the printer, refer to the operating instructions supplied with the printer.
Cannot print images.
• Check that the camera and the printer are properly connected using the cable for multi-use
terminal.
• Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
• If you select [Exit] during printing, images may not be printed. Disconnect and connect the
cable for multi-use terminal again. If you still cannot print your images, disconnect the cable
for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use
terminal again.
• Movies cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may
not be printed.
Printing is canceled.
• Confirm that you have disconnected the cable for multi-use terminal before the
(PictBridge Connecting) mark disappears.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
PictBridge compliant printer
108
Troubleshooting
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 94).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
size after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 94) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
The camera does not function with the lens portion extended.
• Do not attempt to force the lens that has stopped moving.
• Insert a charged battery, then turn on the camera again.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it.
The lens does not move when you turn off the camera.
• The battery pack is discharged. Replace it with a charged battery pack.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 68).
You want to change the date or time.
• Set the date and time again (page 68).
Others
109
Troubleshooting
Warning indicators and messages
If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by
ss) will differ depending on
the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, your camera may need repair.
Contact your Sony dealer or local
authorized Sony service facility.
C:32:ss
• There is trouble with your camera’s
hardware. Turn the power off and on
again.
C:13:ss
• The camera cannot read or write data on
the “Memory Stick Duo”. Try turning
off and on the camera again, or taking
out and inserting the “Memory Stick
Duo” several times.
• The internal memory has experienced a
format error, or an unformatted
“Memory Stick Duo” is inserted.
Format the internal memory or the
“Memory Stick Duo” (pages 58, 61).
• The inserted “Memory Stick Duo”
cannot be used with your camera, or the
data is damaged. Insert a new “Memory
Stick Duo”.
E:61:ss
E:62:ss
E:91:ss
• A camera malfunction has occurred.
Initialize the camera (page 62), then
turn the power on again.
If the following messages appear, follow
the instructions.
E
• The battery level is low. Charge the
battery pack immediately. Depending
on the conditions of use or the type of
battery pack, the indicator may flash
even though there are still 5 to 10
minutes of remaining battery time left.
For use with compatible battery only
• The battery inserted is not an NP-BG1
battery pack.
System error
• Turn the power off and then on again.
Internal memory error
• Turn the power off and then on again.
Reinsert the Memory Stick
• Insert the “Memory Stick Duo”
correctly.
• The inserted “Memory Stick Duo”
cannot be used in your camera
(page 113).
• The “Memory Stick Duo” is damaged.
• The terminal section of the “Memory
Stick Duo” is dirty.
Memory Stick type error
• The inserted “Memory Stick Duo”
cannot be used in your camera
(page 113).
Cannot access Memory Stick Access
denied
• You are using the “Memory Stick” with
the access controlled.
Self-diagnosis display Messages
110
Warning indicators and messages
Memory Stick formatting error
Internal memory formatting error
• Format the media again (pages 58 and
61).
Memory Stick locked
• You are using the “Memory Stick Duo”
with the write-protect switch, and the
switch is set to the LOCK position. Set
the switch to the recording position
(page 113).
No memory space in internal
memory
No memory space on Memory Stick
• Delete unnecessary images or files
(page 31).
Read only memory
• Your camera cannot record or delete
images on this “Memory Stick Duo”.
No Images
• No images that can be played have been
recorded in the internal memory.
• No images that can be played have been
recorded in this folder.
• The selected folder does not contain a
file that can be played in a Slide Show
with music.
Folder error
• A folder with the same first three digit
number already exists on the “Memory
Stick Duo” (for example: 123MSDCF
and 123ABCDE). Select another
folders, or create a new folder (pages
58, 59).
Cannot create more folders
• The folder with a name beginning with
“999” exists on the “Memory Stick
Duo”. You cannot create any folders if
this is the case.
File error
• An error occurred while the image was
playing back.
Read only folder
• You have selected a folder that cannot
be set as a recording folder on your
camera. Select another folder (page 59).
File protect
• Release the protection (page 53).
Image size over
• You are playing back an image with size
that cannot be played back on your
camera.
Invalid operation
• You are trying to playback a file that is
not compatible with the camera.
• You have selected a function that is not
available for movies.
(Vibration warning indicator)
• Camera shake may occur due to
insufficient light. Use the flash, turn on
the anti-blur function, or mount the
camera on a tripod to secure the camera.
640(Fine) is not available
• 640(Fine) size movies can be recorded
only using a “Memory Stick PRO Duo”.
Insert a “Memory Stick PRO Duo” or
set the image size to a size other than
[640(Fine)].
111
Troubleshooting
Warning indicators and messages
Macro is invalid
• The macro is unavailable under these
settings (pages 24, 28).
Flash settings cannot be changed
• The flash is unavailable during these
settings (pages 24, 28).
Maximum images selected
• You can select up to 100 images.
Remove the checkmark.
No enough battery
• When copying a image recorded in the
internal memory to the “Memory Stick
Duo”, use a fully charged battery.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check the printer.
• Check if the image you want to print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.
Music Error
• Delete the Music file, or replace it with
a normal Music file.
• Execute [Format Music], then download
a new Music files.
Format Music Error
• Execute [Format Music].
Invalid operation
HD (1080i) output in progress...
• You are trying to playback movies.
• You are trying to [Retouch] function.
TV output in progress...
• The camera is playing back images in
the Slide Show mode.
No red-eye detected
• You may not be able to correct the red-
eye phenomenon depending on the
image.
112
Others
To use your camera abroad — Power
sources
You can use your camera, the battery charger (supplied), and the AC-LS5K AC Adaptor (not
supplied) in any country or region where the power supply is within 100 V to 240 V AC,
50/60 Hz.
• Do not use an electronic transformer (travel converter), as this may cause a
malfunction.
113
Others
On the “Memory Stick”
A “Memory Stick” is a compact, portable
IC recording medium. The types of
“Memory Stick” that can be used with this
camera are listed in the table below.
However, proper operation cannot be
guaranteed for all “Memory Stick”
functions.
*1
“Memory Stick Duo”, “MagicGate Memory
Stick Duo” and “Memory Stick PRO Duo” are
equipped with MagicGate functions.
MagicGate is copyright protection technology
that uses encryption technology. Data
recording/playback that requires MagicGate
functions cannot be performed with this
camera.
*2
Supports high-speed data transfer using a
parallel interface.
*3
640(Fine) size movies can be recorded.
• This product is compatible with “Memory Stick
Micro” (“M2”). “M2” is an abbreviation for
“Memory Stick Micro”.
• A “Memory Stick Duo” formatted with a
computer is not guaranteed to operate with this
camera.
• Data read/write speeds differ depending on the
combination of the “Memory Stick Duo” and
the equipment used.
Notes on using a “Memory Stick Duo”
(not supplied)
• You cannot record, edit or delete images if you
slide the write-protect switch to LOCK with a
fine-tipped object.
Some “Memory Stick Duo” cards do not
have a write-protect switch. On “Memory
Stick Duo” with this switch, the position
and shape may vary depending on the
“Memory Stick Duo”.
• Do not remove the “Memory Stick Duo” while
reading or writing data.
• Data may be corrupted in the following cases:
– When the “Memory Stick Duo” is removed or
the camera is turned off during a read or write
operation
– When the “Memory Stick Duo” is used in
locations subject to static electricity or
electrical noise
• We recommend backing up important data.
• Do not press down hard when you write down
on the memo area.
• Do not attach a label on the “Memory Stick
Duo” itself nor on a Memory Stick Duo
Adaptor.
• When you carry or store the “Memory Stick
Duo”, put it in the case supplied with it.
• Do not touch the terminal section of the
“Memory Stick Duo” with your hand or a metal
object.
• Do not strike, bend or drop the “Memory Stick
Duo”.
• Do not disassemble or modify the “Memory
Stick Duo”.
• Do not expose the “Memory Stick Duo” to
water.
• Do not leave the “Memory Stick Duo” within
the reach of small children. They might
accidentally swallow it.
“Memory Stick” type Recording/
Playback
Memory Stick
(without MagicGate)
—
Memory Stick
(with MagicGate)
—
Memory Stick Duo
(without MagicGate)
a
Memory Stick Duo
(with MagicGate)
a
*1*2
MagicGate Memory Stick —
MagicGate Memory Stick
Duo
a
*1
Memory Stick PRO —
Memory Stick PRO Duo
a
*1*2*3
Te rm i na l
Write-protect
switch
Memo area
114
On the “Memory Stick”
• Do not use or store the “Memory Stick Duo”
under the following conditions:
– High temperature locations such as the hot
interior of a car parked in direct sunlight
– Locations exposed to direct sunlight
– Humid locations or locations with corrosive
substances present
Notes on using the Memory Stick Duo
Adaptor (not supplied)
• To use a “Memory Stick Duo” with a “Memory
Stick” compliant device, be sure to insert the
“Memory Stick Duo” into a Memory Stick Duo
Adaptor. If you insert a “Memory Stick Duo”
into a “Memory Stick” compliant device
without a Memory Stick Duo Adaptor, you
might not be able to remove it from the device.
• When inserting a “Memory Stick Duo” into a
Memory Stick Duo Adaptor, make sure the
“Memory Stick Duo” is inserted facing in the
correct direction, then insert it all the way in.
Incorrect insertion may result in a malfunction.
• When using a “Memory Stick Duo” inserted
into a Memory Stick Duo Adaptor with a
“Memory Stick” compliant device, make sure
that the Memory Stick Duo Adaptor is inserted
facing the correct direction. Note that improper
use may damage the equipment.
• Do not insert a Memory Stick Duo Adaptor into
a “Memory Stick” compliant device without a
“Memory Stick Duo” attached. Doing so may
result in malfunction of the unit.
Notes on using “Memory Stick PRO
Duo” (not supplied)
“Memory Stick PRO Duo” with a capacity up to
8 GB have been confirmed to operate properly
with this camera.
Notes on using “Memory Stick Micro”
(not supplied)
• To use a “Memory Stick Micro” with this
camera, be sure to insert the “Memory Stick
Micro” into an “M2” Adaptor as large as of Duo
size. If you insert a “Memory Stick Micro” into
the camera without an “M2” Adaptor as large as
of Duo size, you might not be able to remove it
from the camera.
• Do not leave the “Memory Stick Micro” within
the reach of small children. They might
accidentally swallow it.
115
Others
On the battery pack
On charging the battery pack
We recommend charging the battery pack in an
ambient temperature of between 10°C to 30°C
(50°F to 86°F). You may not be able to efficiently
charge the battery pack outside of this temperature
range.
Effective use of the battery pack
• Battery performance decreases in low
temperature surroundings. So, the time that the
battery pack can be used is shorter in cold
places. We recommend the following to ensure
longer battery pack use:
– Put the battery pack in a pocket close to your
body to warm it up, and insert it in your
camera immediately before you start
shooting.
• The battery pack will run out quickly if you use
the flash or zoom frequently.
• We recommend having spare battery packs
handy for two or three times the expected
shooting time, and making trial shots before
taking the actual shots.
• Do not expose the battery pack to water. The
battery pack is not water-resistant.
• Do not leave the battery pack in extremely hot
places, such as in a car or under direct sunlight.
How to store the battery pack
• If the battery pack is not to be used for a long
time, fully charge it and then fully use it up once
a year on your camera before storing the battery
pack in a dry, cool place. Repeat this charging
and using up once a year to maintain the battery
pack’s function.
• To use the battery pack up, leave your camera in
slide show (page 48) playback mode until the
power goes off.
• To prevent staining the terminal, short-
circuiting, etc., be sure to use a supplied battery
case when carrying and storing.
On battery life
• The battery life is limited. Battery capacity
decreases little by little as you use it more and
more, and as time passes. If the battery
operating time seems shortened considerably, a
probable cause is that the battery pack has
reached the end of its life. Buy a new battery
pack.
• The battery life varies according to how it is
stored and the operating conditions and
environment in which each battery pack is used.
116
On the battery charger
On the battery charger
• Do not charge any other battery pack other than
the NP-BG type battery packs in the battery
charger supplied with your camera. Batteries
other than the specified kind may leak, overheat,
or explode if you attempt to charge them, posing
a risk of injury from electrocution and burns.
• Remove the charged battery pack from the
battery charger. If you leave the charged battery
pack in the charger, battery life may be
shortened.
• When the CHARGE lamp flashes, this may
indicate a battery error or that a battery pack
other than the specified type have been inserted.
Check that the battery pack is the specified type.
If the battery pack is the specified type, remove
the battery pack, replace it with new one or
another one and check if the battery charger
operates correctly. If the battery charger
operates correctly, a battery error may have
occurred.
• If the battery charger is dirty, charging may not
be performed successfully. Clean the battery
charger with dry cloth, etc.
117
Index
Index
Index
A
Adjusting EV ..................19, 41
AE/AF lock indicator......22, 44
AF Illuminator ......................65
AF lock .................................44
AF Mode...............................66
AF range finder frame ..........42
Aperture ..................................8
Auto Adjustment mode.........22
Auto Focus..............................7
Auto Orientation ...................67
Auto Review .........................67
B
B & W...................................40
Battery charger....................116
battery pack.........................115
Beach mode ..........................27
Beep ......................................62
Blur .........................................7
Burst......................................39
C
Cable for multi-use terminal
...........................70, 77, 94
Center AF .............................43
Center-weighted metering ....42
Change REC. Folder.............59
Clock Settings.......................68
Cloudy ..................................45
Color .......................................9
Color Mode...........................40
COMPONENT .....................63
Computer ..............................73
Copying images.......76, 90
Macintosh ......................90
Recommended
environment .............74, 90
Software.........................75
Viewing image files stored
on a computer with your
camera........................... 82
Windows ....................... 73
Connecting
Computer ...................... 77
Printer............................ 94
TV ................................. 70
Copy ..................................... 60
Copying images to your
computer ....................... 76
Create REC. Folder .............. 58
Cross Filter ........................... 52
D
Date .......................... 68, 87, 95
Daylight................................ 45
Delete ................................... 51
Format..................... 58, 61
Deleting images.................... 31
Digital Zoom ........................ 66
DirectX................................. 74
DISP ..................................... 18
Download Music .................. 89
DPOF ............................. 54, 96
E
EV ........................................ 41
Exposure................................. 8
Exposure Bracket ................. 39
Extension.............................. 82
F
Face Detection...................... 38
File name.............................. 81
File storage destination ........ 81
Fisheye Lens......................... 52
Flash (White Bal) ................. 46
Flash forced off .................... 24
Flash forced on..................... 24
Flash Level ........................... 46
Flash mode............................24
Fluorescent Light 1, 2, 3.......45
Focus...........................7, 23, 42
Focus preset ..........................43
Folder....................................55
Changing .......................59
Creating .........................58
Selecting ........................55
Format.............................58, 61
Format Music........................89
Function Guide .....................62
G
Grid Line ..............................65
H
High Sensitivity mode ..........27
Histogram .......................18, 19
Holding the camera...........7, 22
HOME ..................................33
I
Identifying parts....................12
Image file storage destinations
and file names................81
Image quality ........................10
Image Size ............................37
Image size.............................10
Incandescent .........................45
Index Display........................48
Index screen..........................30
Indicator................................14
Initialize ................................62
Install ....................................75
Internal memory ...................20
Internal Memory Tool...........61
ISO....................................8, 41
J
JPG .......................................81
118
Index
L
Landscape mode ...................27
Language Setting ..................69
LCD backlight ......................18
LCD Screen ..........................18
M
Macintosh computer .............90
Recommended
environment...................90
Macro....................................24
Main Settings 1.....................62
Main Settings 2.....................63
Manage Memory ..................58
Map View .............................86
Mass Storage ........................63
“Memory Stick Duo”..........113
Memory Stick Tool...............58
Menu
Items..............................36
Shooting ........................37
Viewing .........................51
Metering Mode .....................42
Mode Dial.............................21
Monitor .................................66
MPG .....................................81
Multi AF ...............................42
Multi Connector .......70, 77, 94
Multi-pattern metering .........42
Music ....................................50
Music Tool............................89
Music Transfer................89, 91
N
Natural ..................................40
NR slow shutter ....................15
NTSC....................................64
O
Optical zoom.................. 23, 66
OS .................................. 74, 90
Overexposure ......................... 8
P
PAL ...................................... 64
Partial Color ......................... 51
PC......................................... 73
PictBridge ...................... 63, 93
Picture Motion Browser....... 83
Pixel ..................................... 10
Playback zoom ..................... 29
Precision digital zoom ......... 66
Pressing halfway down .......... 7
Print................................ 54, 92
Print order mark ................... 96
Printing at a shop ................. 96
Printing directly ................... 93
Program Auto mode............. 21
Protect .................................. 53
R
REC Mode ........................... 39
Red Eye Correction.............. 52
Red Eye Reduction .............. 46
Retouch ................................ 51
Rotate ................................... 54
S
Scene Selection .................... 26
Screen
Changing the display .... 18
Indicator........................ 14
LCD backlight .............. 18
Select Folder ........................ 55
Self-diagnosis display ........ 109
Self-timer ............................. 24
Sepia..................................... 40
Settings................................. 62
SETUP.................................. 47
Shooting ............................... 37
Movies..................... 22, 23
Still image ..................... 22
Shooting Settings 1............... 65
Shooting Settings 2............... 67
Shutter speed .......................... 8
Single.................................... 66
Single Image......................... 48
Slide Show...................... 48, 51
Slow synchro ........................ 24
Smart zoom .......................... 66
Snow mode ........................... 27
Soft Focus.............................51
Soft Snap mode .................... 27
Software ................... 75, 83, 89
Spot AF ................................ 43
Spot metering .......................42
Spot metering cross hairs .....42
SteadyShot............................ 47
T
Trimming.............................. 52
Troubleshooting....................98
TV......................................... 70
Twilight mode....................... 27
Twilight Portrait mode.......... 27
U
Underexposure........................ 8
USB Connect........................ 63
Using your camera abroad
..................................... 112
V
VGA ..................................... 11
Video Out .............................64
Viewing images .................... 29
Viewing menu....................... 51
Vivid ..................................... 40
119
Index
Index
Volume..................................29
W
Warning indicators and
messages......................109
White Bal ..............................45
Windows computer ...............73
Recommended
environment ...................74
Write-protect switch ...........113
Z
Zoom.....................................23
120
Notes on the License
“C Library”, “Expat”, and “zlib” software
are provided in your camera. We provide
this software based on license agreements
with their owners of copyright. Based on
requests by the owners of copyright of these
software applications, we have an
obligation to inform you of the following.
Please read the following sections.
Read “license1.pdf” in the “License” folder
on the CD-ROM. You will find licenses (in
English) of “C Library”, “Expat”, “zlib”
software.
On GNU GPL/LGPL applied software
The software that is eligible for the
following GNU General Public License
(hereinafter referred to as “GPL”) or GNU
Lesser General Public License (hereinafter
referred to as “LGPL”) are included in the
camera.
This informs you that you have a right to
have access to, modify, and redistribute
source code for these software programs
under the conditions of the supplied GPL/
LGPL.
Source code is provided on the web. Use the
following URL to download it.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us
about the contents of source code.
Read “license2.pdf” in the “License” folder
on the CD-ROM. You will find licenses (in
English) of “GPL”, and “LGPL” software.
To view the PDF, Adobe Reader is needed.
If it is not installed on your computer, you
can download it from the Adobe Systems
web page:
http://www.adobe.com/
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
… 23 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony DSC-W90S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony DSC-W90S in de taal/talen: Engels als bijlage per email.

De handleiding is 7,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sony DSC-W90S

Sony DSC-W90S Gebruiksaanwijzing - Nederlands, Deutsch - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info