35542
15
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
©2000 Sony Corporation
Model No. DCR-TRV Model No. AC-
Serial No. Serial No.
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
3-058-871-12 (1)
DCR-TRV120/TRV320
DCR-TRV320
Digital
Video Camera
Recorder
2
Welcome!
Congratulations on your purchase of this Sony Digital Handycam camcorder. With your
Digital Handycam, you can capture life’s precious moments with superior picture and sound
quality. Your Digital Handycam is loaded with advanced features, but at the same time it is
very easy to use. You will soon be producing home video that you can enjoy for years to
come.
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
For customers in the U.S.A.
If you have any questions about this product,
you may call: Sony Customer Information
Center 1-800-222-SONY(7669) or write to: Sony
Customer Information Center 1 Sony Drive,
Mail Drop #T1-11, Park Ridge, NJ 07656
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-TRV120
Responsible Party: Sony Electronics lnc.
Address: 1 Sony Drive, Park Ridge,
NJ, 07656 USA
Telephone No.: 201-930-6972
This device complies with Part15 of the FCC
Rules. Operation is subject to the following two
conditions.: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-TRV320
Responsible Party: Sony Electronics lnc.
Address: 1 Sony Drive, Park Ridge,
NJ, 07656 USA
Telephone No.: 201-930-6972
This device complies with Part15 of the FCC
Rules. Operation is subject to the following two
conditions.: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Never expose the battery pack to temperatures
above 140°F (60°C ) such as in a car parked in
the sun or under direct sunlight.
DISPOSAL OF LITHIUM ION BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion batteries
to your nearest Sony Service Center or Factory
Service Center.
Note: In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
For the Sony Service Center nearest you call
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest you call
416-499-SONY (Canada only)
Caution: Do not handle damaged or leaking lithium
ion battery.
3
Getting started
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
For customers in CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
“Memory Stick”
For customers in CANADA
This Class B digital apparatus complies with
Canadian ICES-003.
For customers in the U.S.A
This device complies with Part15 of the FCC Rules.
Operation is subject to the following two conditions.:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
4
Table of contents
Windows
is registered trademark or trademark
of Microsoft Corporation, registered in the
United States and other countries.
Macintosh is trademark of Apple Computer, Inc.
All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies.
Furthermore, “” and “” are not mentioned in
each case in this manual.
Checking supplied accessories....................... 5
Quick Start Guide ............................... 6
Getting started
Using this manual ............................................ 8
Step 1 Preparing the power supply ............ 10
Installing the battery pack ..................... 10
Charging the battery pack ..................... 11
Connecting to a wall outlet ................... 14
Step 2 Inserting a cassette ............................ 15
Recording – Basics
Recording a picture........................................ 16
Shooting backlit subjects
– BACK LIGHT ............................... 20
Shooting in the dark
– NightShot/Super NightShot ...... 20
Self-timer recording
(DCR-TRV320 only) ........................ 22
Checking the recording – END SEARCH /
EDITSEARCH / Rec Review ................ 23
Playback – Basics
Playing back a tape ........................................ 24
Viewing the recording on TV ....................... 27
Advanced Recording Operations
Recording a still image on a tape
– Tape Photo recording ......................... 29
Using the wide mode .................................... 32
Using the fader function ............................... 33
Using special effects – Picture effect ........... 36
Using special effects – Digital effect ............ 37
Using the PROGRAM AE function ............. 40
Adjusting the exposure manually ............... 42
Focusing manually......................................... 43
Superimposing a title .................................... 44
Making your own titles ................................. 46
Inserting a scene ............................................. 48
Advanced Playback Operations
Playing back a tape with picture effects ..... 49
Playing back a tape with digital effects ...... 50
Enlarging recorded images – PB ZOOM .... 51
Quickly locating a scene using the zero set
memory function .................................... 52
Searching a recording by date
– Date search ........................................... 53
Searching for a photo
– Photo search/Photo scan.................... 55
Editing
Dubbing a tape ............................................... 57
Using with analog video unit and PC
– Signal convert function ....................... 59
Recording video or TV programs ................ 60
Inserting a scene from a VCR
– Insert Editing........................................ 62
Customizing Your Camcorder
Changing the menu settings......................... 64
Resetting the date and time .......................... 71
“Memory Stick” operations
(DCR-TRV320 only)
Using “Memory Stick”–introduction .......... 72
Recording still images on “Memory Stick”
– Memory Photo recording ................... 77
Superimposing a still image in the “Memory
Stick” on a moving image
– MEMORY MIX..................................... 82
Recording an image from a tape as a still
image ........................................................ 85
Copying still images from a tape
– Photo save............................................. 87
Viewing a still image
– Memory photo playback .................... 89
Copying the image recorded on “Memory
Stick” to tapes ......................................... 92
Enlarging still images recorded on “Memory
Stick”s – Memory PB ZOOM ................ 94
Playing back images in a continuous loop
– SLIDE SHOW ....................................... 95
Preventing accidental erasure
– Image protection .................................. 97
Deleting images .............................................. 98
Writing a print mark – PRINT MARK ...... 101
Additional Information
Digital8 system, recording and playback
................................................................. 102
About i.LINK ................................................ 104
Changing the lithium battery in your
camcorder .............................................. 106
Troubleshooting ........................................... 108
Self-diagnosis display.................................. 113
Warning indicators and messages ............. 114
Using your camcorder abroad ................... 116
Maintenance information and precautions117
Specifications ................................................ 122
Quick Reference
Identifying the parts and controls ............. 123
Quick Function Guide ................................. 130
Index .............................................................. 131
Getting started
5
Checking supplied accessories
Make sure that the following accessories are supplied with your camcorder.
1 Wireless Remote Commander (1)
(p. 128)
2 AC-L10A/L10B/L10C AC power
adaptor (1), Power cord (1) (p. 11)
3 NP-F330 battery pack (1) (p. 10, 11)
4 CR2025 lithium battery (1) (p. 106)
The lithium battery is already installed
in your camcorder.
5 Size AA (R6) battery for Remote
Commander (2) (p. 128)
Contents of the recording cannot be compensated if recording or playback is not
made due to a malfunction of the camcorder, video tape, etc.
6 A/V connecting cable (1) (p. 27)
7 Shoulder strap (1) (p. 125)
8 Lens cap (1) (p. 16)
9 PC serial cable (1) (p. 91)
DCR-TRV320 only
0 “Memory Stick” (1) (p. 72)
DCR-TRV320 only
qa Application software: PictureGear 4.1
Lite (CD-ROM) (1) (p. 91)
DCR-TRV320 only
12 3
45 6 7
89 0 qa
Quick Start Guide
6
Quick Start Guide
This chapter introduces you to the basic features of your
camcorder. See the page in parentheses “( )” for more
information.
Open the DC IN
jack cover.
Connect the plug with
its v mark facing up.
Inserting a cassette (p. 15)
Connecting the power cord (p. 14)
Use the battery pack when using your camcorder outdoors (p. 10).
3Close the cassette
compartment by
pressing the
mark
on the cassette
compartment. The
cassette compartment
automatically goes
down.
Close the lid of the
cassette compartment.
1Open the lid of the
cassette compartment,
and press EJECT. The
compartment opens
automatically.
2Insert a cassette
into the cassette
compartment
with its window
facing out and the
write-protect tab
on the cassette up.
AC power adaptor (supplied)
EJECT
Quick Start Guide
7
2Press m to rewind the tape.
3Press N to start playback.
Recording a picture (p. 16)
Monitoring the playback picture on the LCD
screen (p. 24)
Note
Do not pick up your camcorder by
holding the viewfinder, the LCD
panel, or the battery pack.
3Open the LCD panel
while pressing OPEN.
The picture appears
on the LCD screen.
REW
PLAY
Viewfinder
When the LCD panel is closed, use the
viewfinder placing your eye against its eyecup.
The picture in the viewfinder is black and white.
2Set the POWER
switch to CAMERA
while pressing the
small green button.
4Press the red button.
Your camcorder
starts recording. To
stop recording, press
the red button again.
1Remove the lens cap.
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
1Set the POWER
switch to VTR while
pressing the small
green button.
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
8
The instructions in this manual are for the two models listed in the table below. Before
you start reading this manual and operating your camcorder, check the model number
by looking at the bottom of your camcorder. The DCR-TRV320 is the model used for
illustration purposes. Otherwise, the model name is indicated in the illustrations. Any
differences in operation are clearly indicated in the text, for example, “DCR-TRV320
only.”
As you read through this manual, buttons and settings on your camcorder are shown in
capital letters.
e.g. Set the POWER switch to CAMERA.
When you carry out an operation, you can hear a beep sound to indicate that the
operation is being carried out.
Types of differences
DCR- TRV120 TRV320
MEMORY mark*
z
(on the POWER switch)
Self-timer z
z Provided
Not provided
* The model with MEMORY marked on the POWER switch is provided with memory
functions. See page 72 for details.
Before using your camcorder
With your digital camcorder, you can use Hi8 /Digital8 video cassettes. Your
camcorder records and plays back pictures in the Digital8 system. Also, your
camcorder plays back tapes recorded in the Hi8 /standard 8 (analog) system.
You, however, cannot use the functions in “Advanced Playback Operations” on page 49
to 56 for playback in the Hi8 /standard 8 system. To enable smooth transition,
we recommend that you do not mix pictures recorded in the Hi8 /standard 8
with the Digital8 system on a tape.
Note on TV color systems
TV color systems differ from country to country. To view your recordings on a TV, you
need an NTSC system-based TV.
Copyright precautions
Television programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the
copyright laws.
— Getting started —
Using this manual
Getting started
9
[a] [b] [c]
Using this manual
Precautions on camcorder care
The LCD screen and the viewfinder are manufactured using high-precision
technology. However, there may be some tiny black points and/or bright points
(red, blue, green or white) that constantly appear on the LCD screen and in the
viewfinder. These points occur normally in the manufacturing process and do not
affect the recorded picture in any way. Effective ratio of pixels and/or screen are
99.99% or more.
Do not let your camcorder get wet. Keep your camcorder away from rain and sea
water. Letting your camcorder get wet may cause your camcorder to malfunction.
Sometimes this malfunction cannot be repaired [a].
Never leave your camcorder exposed to temperatures above 140°F (60°C ), such as in a
car parked in the sun or under direct sunlight [b].
Do not place your camcorder so as to point the viewfinder, the LCD screen or lens
toward the sun. The inside of the viewfinder, LCD screen or lens may be damaged [c].
10
Installing the battery pack
Install the battery pack to use your camcorder outdoors.
Slide the battery pack down until it clicks.
To remove the battery pack
Slide the battery pack out in the direction of the arrow while pressing BATT
RELEASE down.
After installing the battery pack
Do not carry your camcorder by holding the battery pack. If you do so, the battery pack
may slide off your camcorder unintentionally, damaging your camcorder.
Step 1 Preparing the power supply
BATT
RELEASE
11
Getting started
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
Step 1 Preparing the power supply
Charging the battery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (L series).
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with your
camcorder to the DC IN jack with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHARGE). Charging begins. The remaining battery
time is indicated in minutes on the display window.
When the remaining battery indicator changes to u, normal charge is completed. To
fully charge the battery (full charge), leave the battery pack attached for about 1 hour
after normal charge is completed until FULL appears in the display window. Fully
charging the battery allows you to use the battery longer than usual.
1
2
4
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
Notes
Prevent metallic objects from coming into contact with the metal parts of the DC plug
of the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
Keep the battery pack dry.
When the battery pack is not to be used for a long time, charge the battery pack once
fully, and then use it until it fully discharges again. Keep the battery pack in a cool
place.
When the battery pack is charged fully
The LCD backlight of the display window is turned off.
Remaining battery time indicator
The remaining battery time indicator in the display window roughly indicates the
recording time with the viewfinder.
Battery pack
The supplied battery pack is charged a little.
12
Step 1 Preparing the power supply
Until your camcorder calculates the actual remaining battery time
“– – – – min” appears in the display window.
While charging the battery pack, no indicator appears or the indicator flashes in
the display window in the following cases:
The battery pack is not installed correctly.
The AC power adaptor is disconnected.
Something is wrong with the battery pack.
Charging time
Battery pack Full charge (Normal charge)
NP-F330 (supplied) 150 (90)
NP-F530/F550 210 (150)
NP-F730/F730H/F750 300 (240)
NP-F930/F950 390 (330)
NP-F960 420 (360)
Approximate number of minutes to charge an empty battery pack
Recording time
DCR-TRV120
Recording with Recording with
Battery pack the viewfinder the LCD screen
Continuous* Typical** Continuous* Typical**
NP-F330 (supplied) 100 (90) 55 (50) 90 (80) 50 (45)
NP-F530 170 (155) 95 (90) 150 (135) 85 (75)
NP-F550 205 (185) 115 (105) 185 (165) 105 (95)
NP-F730 350 (310) 200 (175) 305 (275) 175 (155)
NP-F730H/F750 425 (380) 240 (215) 375 (335) 215 (190)
NP-F930 555 (500) 315 (285) 480 (435) 275 (250)
NP-F950 650 (590) 370 (335) 570 (515) 325 (295)
NP-F960 765 (685) 435 (390) 680 (610) 385 (345)
DCR-TRV320
Recording with Recording with
Battery pack the viewfinder the LCD screen
Continuous* Typical** Continuous* Typical**
NP-F330 (supplied) 95 (85) 55 (50) 85 (75) 50 (40)
NP-F530 160 (145) 90 (80) 140 (125) 80 (70)
NP-F550 195 (175) 110 (100) 170 (155) 95 (90)
NP-F730 325 (290) 185 (165) 290 (260) 165 (150)
NP-F730H/F750 395 (355) 225 (200) 355 (315) 200 (180)
NP-F930 515 (465) 295 (265) 460 (415) 260 (235)
NP-F950 610 (550) 345 (315) 540 (485) 305 (275)
NP-F960 720 (645) 410 (365) 640 (580) 365 (330)
Approximate number of minutes when you use a fully charged battery
Numbers in parentheses “( )” indicate the time using a normally charged battery.
* Approximate continuous recording time at 77°F (25°C). The battery life will be
shorter if you use your camcorder in a cold environment.
** Approximate number of minutes when recording while you repeat recording start/
stop, zooming and turning the power on/off. The actual battery life may be shorter.
13
Getting started
Playing time
DCR-TRV120
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-F330 (supplied) 90 (80) 100 (90)
NP-F530 145 (130) 165 (150)
NP-F550 175 (160) 200 (180)
NP-F730 300 (270) 335 (300)
NP-F730H/F750 365 (325) 410 (365)
NP-F930 475 (430) 535 (480)
NP-F950 555 (500) 630 (570)
NP-F960 660 (590) 740 (665)
DCR-TRV320
Battery pack
Playing time Playing time
on LCD screen with LCD closed
NP-F330 (supplied) 85 (75) 95 (85)
NP-F530 135 (120) 155 (140)
NP-F550 165 (150) 190 (170)
NP-F730 285 (255) 315 (285)
NP-F730H/F750 345 (305) 385 (345)
NP-F930 450 (405) 495 (450)
NP-F950 525 (470) 590 (530)
NP-F960 625 (560) 700 (630)
Approximate number of minutes when you use a fully charged battery
Numbers in parentheses “( )” indicate the time using a normally charged battery. The
battery life will be shorter if you use your camcorder in a cold environment.
The remaining battery time indicator
The indicator may not be correct, depending on the conditions in which you are
recording. When you close the LCD panel and open it again, it takes about 1 minute for
the correct remaining battery time to be displayed.
If the power may go off although the battery remaining indicator indicates that
the battery pack has enough power to operate
Charge the battery pack fully again so that the indication on the battery remaining
indicator is correct.
What is ”InfoLITHIUM”?
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data such as
battery consumption with compatible electronic equipment. This unit is compatible
with the “InfoLITHIUM” battery pack (L series). Your camcorder operates only with the
“InfoLITHIUM” battery. “InfoLITHIUM” battery packs have the mark.
“InfoLITHIUM” is a trademark of Sony Corporation.
Step 1 Preparing the power supply
14
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN
jack on your camcorder with the plug’s v mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
The AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
The DC IN jack has “source priority”. This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
Using a car battery
Use Sony DC Adaptor/Charger (not supplied).
Step 1 Preparing the power supply
2,3
1
15
Getting started
We recommend using Hi8 /Digital8 video cassettes.
(1) Prepare the power supply. (p. 10)
(2) Open the lid of the cassette compartment, and press EJECT. The cassette
compartment opens automatically.
(3) Insert a cassette with its window facing out and the write-protect tab on the
cassette up.
(4) Close the cassette compartment by pressing the
mark on the cassette
compartment. The cassette compartment automatically goes down.
(5) Close the lid of the cassette compartment.
To eject a cassette
Follow the procedure above, and eject the cassette in step 3.
Notes
Do not press the cassette compartment down. Doing so may cause malfunction.
Your camcorder records pictures in the Digital8 system.
• The recording time when you use your camcorder is half of indicated time on Hi8
tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8
tape.
If you use standard 8 tape, be sure to play back the tape on this camcorder. Mosaic
pattern noise may appear when you play back standard 8 tape on other camcorders
(including other DCR-TRV120/TRV320).
The cassette compartment may not be closed when you press any part of the lid other
than the mark.
Do not pick up your camcorder by holding the lid of the cassette compartment.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
Step 2 Inserting a cassette
2 3
4,5
EJECT
16
5
3
4
1
2
40min
REC
0:00:01
SP
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
— Recording – Basics —
Recording a picture
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and attach the lens
cap to the grip strap.
(2) Install the power source and insert a cassette. See “Step 1” and “Step 2” for
more information (p. 10 to 15).
(3) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(4) Open the LCD panel while pressing OPEN. The viewfinder automatically
turns off.
(5) Press START/STOP. Your camcorder starts recording. The REC indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
The recording lamp lights up in the viewfinder when you record with the
viewfinder.
Camera recording
lamp
Microphone
Notes
Fasten the grip strap firmly.
Do not touch the built-in microphone during recording.
Note on Recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP
(long play) mode. Select SP or LP in the menu settings (p 64). In the LP mode, you can
record 1.5 times as long as in the SP mode. When you record a tape in the LP mode on
your camcorder, we recommend that you play back the tape on your camcorder.
17
Recording – Basics
LCD BRIGHT
Recording a picture
Note on LOCK (DCR-TRV320 only)
When you slide LOCK to the left, the POWER switch can no longer be set to MEMORY
accidentally. The LOCK is released as a default setting.
To enable smooth transition
You can make the transition between the last scene you recorded and the next scene
smooth as long as you do not eject the cassette if you turn off your camcorder. When
you change the battery pack, set the POWER switch to OFF (CHARGE).
If you leave your camcorder in the standby mode for 3 minutes
Your camcorder automatically turns off. This is to save battery power and to prevent
battery and tape wear. To resume the standby mode, set the POWER switch to OFF
(CHARGE) once, then turn it to CAMERA again.
Adjusting the LCD screen
To adjust the brightness of the LCD screen, press either of the two buttons on LCD
BRIGHT.
The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to
the lens side.
If you turn the LCD panel over so that it faces the other way, the indicator appears
on the LCD screen and in the viewfinder (Mirror mode).
When closing the LCD panel, set it vertically until it clicks, and swing it into the
camcorder body.
Note
When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.
Picture in the mirror mode
The picture on the LCD is a mirror-image. However, the picture will be normal when
recorded.
During recording in the mirror mode
You cannot operate the ZERO SET MEMORY on the Remote Commander.
Indicators in the mirror mode
The STBY indicator appears as Xz and REC as z. Some of other indicators appear
mirror-reversed and others are not displayed.
to brighten
to dim
180°
90°
18
After recording
(1) Set the POWER switch to OFF (CHARGE).
(2) Close the LCD panel.
(3) Eject the cassette.
Using the zoom feature
Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom function sparingly results in better-looking recordings.
“T” side: for telephoto (subject appears closer)
“W” side: for wide-angle (subject appears farther away)
Zoom greater than 25× is performed digitally. To activate digital zoom, select the digital
zoom power in D ZOOM in the menu settings. (p. 64)
The picture quality deteriorates as the picture is processed digitally.
Notes on digital zoom
Digital zoom starts to function when zoom exceeds 25×.
The picture quality deteriorates as you go toward the “T” side.
When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 2 feet 5/8 inch (about 80 cm)
away from the lens surface in the telephoto position, or about 1/2 inch (about 1 cm)
away in the wide-angle position.
T
W
T
W
T
W
WT
Recording a picture
The right side of the bar shows the
digital zooming zone.
The digital zooming zone appears
when you select the digital zoom
power in D ZOOM in the menu
settings.
19
Recording – Basics
SP
0:00:01
12:05:56
AMJUL 4 2000
40
min
REC
To record pictures with the viewfinder – adjusting the
viewfinder
If you record pictures with the LCD panel closed, check the picture with the viewfinder.
Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder
come into sharp focus.
Lift up the viewfinder and move the viewfinder lens adjustment lever.
Indicators displayed in the recording mode
The indicators are not recorded on tape.
Time code (for tapes recorded in the Digital8 system only)
The time code indicates the recording or playback time, “0:00:00” (hours:minutes:
seconds) in CAMERA mode and “0:00:00:00” (hours:minutes:seconds:frames) in VTR
mode. You cannot rewrite only the time code.
When you play back tapes recorded in the Hi8/standard 8 system, the tape counter
appears.
You cannot reset the time code or the tape counter.
Recording a picture
STBY/REC indicator
Remaining tape indicator
This appears after you start to record for a while.
Remaining battery time indicator
Time code/Tape counter indicator
Format indicator
Recording mode indicator
Time indicator
This is displayed for five seconds after the POWER switch
is set to CAMERA or MEMORY (DCR-TRV320 only).
Date indicator
This is displayed for five seconds after the POWER switch
is set to CAMERA or MEMORY (DCR-TRV320 only).
20
Recording a picture
BACK LIGHT
NightShot Light
emitter
Shooting backlit subjects – BACK LIGHT
When you shoot a subject with the light source behind the subject or a subject with a
light background, use the backlight function.
Press BACK LIGHT in CAMERA or MEMORY (DCR-TRV320 only) mode.
The . indicator appears on the LCD screen or in the viewfinder.
To cancel, press BACK LIGHT again.
If you press EXPOSURE when shooting backlit subjects
The backlight function will be canceled.
Shooting in the dark – NightShot/Super NightShot
The NightShot function enables you to shoot a subject in a dark place. For example, you
can satisfactorily record the environment of nocturnal animals for observation when
you use this function.
While your camcorder is in CAMERA or MEMORY (DCR-TRV320 only) mode, slide
NIGHTSHOT to ON.
and “NIGHTSHOT” indicators flash on the LCD screen or in the viewfinder.
To cancel the NightShot function, slide NIGHTSHOT to OFF.
NIGHTSHOT
OFF ON SUPER
NIGHTSHOT
21
Recording – Basics
Recording a picture
Using SUPER NIGHTSHOT
The Super NightShot mode makes subjects up to 16 times brighter than those recorded
in the NightShot mode.
(1) Slide NIGHTSHOT to ON in CAMERA mode. and “NIGHTSHOT”
indicators flash on the LCD screen or in the viewfinder.
(2) Press SUPER NIGHTSHOT.
and “SUPER NIGHTSHOT” indicators flash
on the LCD screen or in the viewfinder.
To cancel the Super NightShot mode, press SUPER NIGHTSHOT again.
Using the NightShot Light
The picture will be clearer with the NightShot Light on. To enable NightShot Light, set
N.S.LIGHT to ON in the menu settings (p. 64).
Notes
Do not use the NightShot function in bright places (ex. outdoors in the daytime). This
may cause your camcorder to malfunction.
When you keep NIGHTSHOT set to ON in normal recording, the picture may be
recorded in incorrect or unnatural colors.
If focusing is difficult with the autofocus mode when using the NightShot function,
focus manually.
While using the NightShot function, you can not use the following functions:
Exposure
PROGRAM AE
While using the Super NightShot function, you can not use the following
functions:
Fader
Digital effect
Exposure
PROGRAM AE
Shutter speed in the Super NightShot mode
The shutter speed will be automatically changed depending on the brightness of
the background. The motion of the picture will be slow.
NightShot Light
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 10 feet (3 m).
22
Self-timer recording
– DCR-TRV320 only
Recording with the self-timer starts in 10 seconds automatically. This mode is useful
when you want to record yourself. You can also use the Remote Commander for this
operation.
(1) Press (self-timer) in the standby mode. The (self-timer) indicator appears
on the LCD screen or in the viewfinder.
(2) Press START/STOP.
Self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To stop the self-timer recording
Press START/STOP.
Use the Remote Commander for convenience.
To record still images using the self-timer
Press PHOTO in step 2. (P. 30)
To cancel self-timer recording
Press (self-timer) so that the indicator disappears from the LCD or viewfinder
screen while your camcorder is in the standby mode.
Note
The self-timer recording mode is automatically cancelled when:
Self-timer recording is finished.
The POWER switch is set to OFF (CHARGE) or VTR.
2
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
Recording a picture
(self-timer)
1
START/STOP
23
Recording – Basics
END
SEARCH
EDIT
SEARCH
Checking the recording
– END SEARCH / EDITSEARCH / Rec Review
You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
END SEARCH
You can go to the end of the recorded section after you record.
Press END SEARCH in the standby mode.
The last 5 seconds of the recorded section are played back and returns to the standby
mode. You can monitor the sound from the speaker or headphones.
EDITSEARCH
You can search for the next reconding start point.
Hold down the +/– (7) side of EDITSEARCH in the standby mode. The recorded
section is played back.
+ : to go forward
: to go backward
Release EDITSEARCH to stop playback. If you press START/STOP, re-recording begins
from the point you released EDITSEARCH. You cannot monitor the sound.
Rec Review
You can check the section which you have stopped most recently.
Press the – (7) side of EDITSEARCH momentarily in the standby mode.
The section you have stopped most recently will be played back for a few seconds, and
then your camcorder will return to the standby mode. You can monitor the sound from
the speaker or headphones.
Notes
•END SEARCH, EDITSEARCH and Rec Review work only for tapes recorded in the
Digital8 system.
If you start recording after using the end search function, occasionally, the transition
between the last scene you recorded and the next scene may not be smooth.
Once you eject the cassette after you have recorded on the tape, the end search
function does not work.
If a tape has a blank portion in the recorded portions
The end search function may not work correctly.
24
— Playback – Basics —
Playing back a tape
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can control playback using
the Remote Commander supplied with your camcorder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VTR while pressing the small green button. The
video control buttons light up.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. The
speaker on your camcorder is silent when the LCD panel is closed.
To stop playback
Press x.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the LCD
screen facing out.
3
5
PLAY
4
REW
2
6
1
VOLUME
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
25
Playback – Basics
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Press DATA CODE on your camcorder or the Remote Commander in the playback
mode.
The display changes as follows:
date/time t various settings (SteadyShot, exposure AUTO/MANUAL, white balance,
gain, shutter speed, aperture value) t no indicator
Not to display recording date
Set DATA CODE to DATE in the menu settings (p. 64)
The display changes as follows:
date/time t no indicator
Notes on the data code function
The data code function works only for tapes recorded in the Digital8 system.
Various settings of the recording data are not recorded when recording images on
“Memory Stick”.
Recording data
Recording data is your camcorder’s information when you have recorded. In the
recording mode, the recording data will not be displayed.
When you use data code function, bars (--- -- ---- and --:--:--) appear if:
A blank section of the tape is being played back.
The tape is unreadable due to tape damage or noise.
The tape was recorded by a camcorder without the date and time set.
Data code
When you connect your camcorder to the TV, the data code appears on the TV screen.
JUL 4 2000
12:05:56 AM
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder.
The indicators appear on the LCD screen.
To make the indicators disappear, press DISPLAY again.
DISPLAY
Playing back a tape
DATA CODE
60 AWB
F1.6
9dB
AUTO
26
Various playback modes
To operate video control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press X during playback. To resume playback, press X or N.
To advance the tape
Press M in the stop mode. To resume normal playback, press N.
To rewind the tape
Press m in the stop mode. To resume normal playback, press N.
To change the playback direction
Press on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press N.
To locate a scene monitoring the picture (picture search)
Keep pressing m or M during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing m while rewinding or M while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press y on the Remote Commander during playback. For slow playback in the reverse
direction, press , then press y on the Remote Commander. To resume normal
playback, press N.
To view the picture at double speed
Press ×2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press , then press ×2 on the Remote Commander. To resume
normal playback, press N.
To view the picture frame-by-frame
Press C on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To resume normal playback, press N.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section plays
back and stops.
In the various playback modes
Noise may appear when your camcorder plays back tapes recorded in the Hi8/
standard 8 system.
Sound is muted.
The previous recording may appear as a mosaic image when playing back in the
Digital8 system.
Notes on the playback pause mode
When the playback pause mode lasts for 3 minutes, your camcorder automatically
enters the stop mode. To resume playback, press N.
The previous recording may appear.
Slow playback for tapes recorded in the Digital8 system
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output signal from the DV IN/OUT jack.
When you play back a tape in reverse
Horizontal noise may appear at the center or top and bottom of the screen. This is not a
malfunction.
Playing back a tape
27
Playback – Basics
S VIDEO
S VIDEO
VIDEO
AUDIO
IN
AUDIO
/
VIDEO
Viewing the recording on TV
If your TV is already connected to a VCR
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
If your TV or VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. If you connect the
white plug, the sound is L (left) signal. If you connect the red plug, the sound is R
(right) signal.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (not supplied) to the S video jacks on both your camcorder
and the TV or the VCR.
Connect your camcorder to your TV or VCR with the A/V connecting cable supplied
with your camcorder to watch the playback picture on the TV screen. You can operate
the playback control buttons in the same way as when you monitor playback pictures
on the LCD screen. When monitoring the playback picture on the TV screen, we
recommend that you power your camcorder from a wall outlet using the AC power
adaptor (p. 14). Refer to the operating instructions of your TV or VCR.
Open the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/VCR selector on the TV to VCR.
: Signal flow
28
Viewing the recording on TV
Using the AV cordless IR receiver
Once you connect the AV cordless IR receiver (not supplied) to your TV or VCR, you
can easily view the picture on your TV. For details, refer to the operating instructions of
the AV cordless IR receiver.
Before operation
Attach the power supply such as the AC power adaptor to your camcorder, and insert
the recorded tape.
(1) After connecting your TV and AV cordless IR receiver, set the POWER switch
on the AV cordless IR receiver to ON.
(2) Turn the TV on and set the TV/VCR selector on the TV to VCR.
(3) Set the POWER switch on your camcorder to VTR.
(4) Press S. LASER LINK. The lamp of S. LASER LINK lights up.
(5) Press N on your camcorder to start playback.
(6) Point the super laser link emitter at the AV cordless IR receiver. Adjust the
position of your camcorder and the AV cordless IR receiver to obtain clear
playback pictures.
To cancel the super laser link function
Press S. LASER LINK. The lamp on the S. LASER LINK button goes out.
If you use a Sony TV
You can turn on the TV automatically when you press S.LASER LINK on your
camcorder. To do so, do as follows in advance:
Turn the TV’s main switch on.
Set AUTO TV ON to ON in the menu settings.
Point the super laser link emitter of your camcorder at the TV’s remote sensor.
You can switch the video input of the TV automatically to the one which the AV
cordless IR receiver is connected. To do so, set AUTO TV ON to ON and TV INPUT to
the same video input (1, 2, 3) in the menu settings. With some models, however, the
picture and sound may be disconnected momentarily when the video input is
switched.
The above feature may not work on some TV models.
If you turn the power off
Super laser link function turns off automatically.
When super laser link is activated (the S. LASER LINK button is lit)
Your camcorder consumes power. Press S. LASER LINK to turn off the super laser link
function when it is not needed.
is a trademark of Sony Corporation.
S. LASER LINK
Super laser link emitter
29
Advanced Recording Operations
PHOTO PHOTO
1
•••••••
CAPTURE
2
Notes
During the tape photo recording, you cannot change the mode or setting.
The PHOTO button does not work:
while the digital effect function is set or in use.
while the fader function is in use.
When recording a still image, do not shake your camcorder. Mosaic-pattern noise may
appear on the image.
To use tape photo recording function using the Remote Commander
Press PHOTO in the Remote Commander. Your camcorder records an image on the
LCD screen or in the viewfinder immediately.
When you use the tape photo recording function during normal CAMERA
recording
You cannot check an image on the LCD screen or in the viewfinder by pressing PHOTO
lightly. Press PHOTO deeper. The still image is then recorded for about seven seconds,
and your camcorder returns to the standby mode. During the seven seconds to record,
you cannot shoot another still image.
You can record a still image like a photograph. This mode is useful when you want to
record an image such as a photograph or when you print a picture using a video printer
(not supplied).
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a tape which can record for 60 minutes in the SP mode.
Besides the operation described here, your camcorder can record still images on
“Memory Stick”s (p. 72) (DCR-TRV320 only).
(1) In the standby mode, keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet.
To change the still image, release PHOTO, select a still image again, and then
press and hold PHOTO lightly.
(2) Press PHOTO deeper.
The still image on the LCD screen or in the viewfinder is recorded for about seven
seconds. The sound during those seven seconds is also recorded.
The still image is displayed on the LCD screen or in the viewfinder untill recording
is completed.
— Advanced Recording Operations —
Recording a still image on a tape
– Tape Photo recording
30
Recording a still image on a tape – Tape Photo recording
Self-timer tape photo recording
– DCR-TRV320 only
You can record still images on tapes with the self-timer. This mode is useful when you
want to record yourself. You can also use the Remote Commander for this operation.
(1) In the standby mode, press (self-timer). The (self-timer) indicator
appears on the LCD screen or in the viewfinder.
(2) Press PHOTO firmly.
Self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To cancel self-timer recording
Press (self-timer) so that the indicator disappears from the LCD or viewfinder
screen while your camcorder is in the standby mode. You cannot cancel self-timer
recording with the Remote Commander.
Note
The self-timer recording mode is automatically cancelled when:
Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE) or VTR.
2
PHOTO
(self-timer)
1
PHOTO
31
Advanced Recording Operations
S VIDEO
AUDIO
/
VIDEO
LINE IN
VIDEO S VIDEO
Printing the still image
You can print a still image by using the video printer (not supplied). Connect the video
printer using the A/V connecting cable supplied with your camcorder.
Connect the A/V connecting cable to the AUDIO/VIDEO jack and connect the yellow
plug of the cable to the video input of the video printer. Refer to the operating
instructions of the video printer as well.
Recording a still image on a tape – Tape Photo recording
: Signal flow
Video printer
If the video printer is equipped with S video input
Use the S video connecting cable (not supplied). Connect it to the S VIDEO jack and the
S video input of the video printer.
32
[a]
[c]
[b]
16:9
WIDE
[d]
MENU
Using the wide mode
You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 WIDE).
Black bands appear on the LCD screen during recording in 16:9 WIDE mode [a]. The
picture during playing back in the viewfinder, on a normal TV [b] or a wide-screen TV
[c] are compressed in the widthwise direction. If you set the screen mode of the wide-
screen TV to the full mode, you can watch pictures of normal images [d].
In the standby mode, set 16:9WIDE to ON in the menu settings (p. 64).
To cancel the wide mode
Set 16:9WIDE to OFF in the menu settings.
In the wide mode, you cannot select the following functions:
Old movie
Bounce
During recording
You cannot select or cancel the wide mode. When you cancel the wide mode, set your
camcorder to the standby mode and then set 16:9WIDE to OFF in the menu setting.
Connection for a TV
Pictures recorded in the 16:9WIDE mode automatically appear on the TV screen at full
size when:
you connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2)
system.
you connect your camcorder to the S video jack on the TV.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment by an A/V
connecting cable.
If the wide mode is set to ON
The SteadyShot function does not work. If you set 16:9WIDE to ON in the menu settings
when the SteadyShot function is working, flashes and the SteadyShot function does
not function.
33
Advanced Recording Operations
You can fade the picture in or out to give your recording a professional appearance.
Using the fader function
MONOTONE
When fading in, the picture gradually changes from black-and-white to color.
When fading out the picture gradually changes from color to black-and-white.
1)
You can use this function when D ZOOM is set to OFF in the menu setting.
2)
Fade in only
FADER
M.FADER
(mosaic)
BOUNCE
1) 2)
OVERLAP
2)
WIPE
2)
DOT
2)
(random dot)
[a]
RECSTBY
RECSTBY
[b]
34
Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER t M.FADER t BOUNCE t MONOTONE t OVERLAP t
WIPE t DOT
The last selected fader mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops flashing.
After the fade in/out is carried out, your camcorder automatically returns to
the normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER until the indicator disappears.
1
FADER
FADER
35
Advanced Recording Operations
Notes
The overlap, wipe and dot functions work only for tapes recorded in the Digital8
system.
You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
Digital effect
Low lux mode of PROGRAM AE (Overlap, wipe, or dot function only)
Super NightShot
Tape photo recording
Before operating the overlap, wipe, or dot function
Your camcorder stores the image on the tape. As the image is being stored, the indicator
flashes quickly, and the image you are shooting disappears from the LCD or viewfinder
screen. Depending on the tape condition, the image may not be recorded clearly.
While using the bounce function, you cannot use the following functions:
Focus
Zoom
Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
D ZOOM is activated in the menu settings
Wide mode
Picture effect
PROGRAM AE
Using the Fader function
36
[a] [b] [c] [d] [e] [f]
You can digitally process images to obtain special effects like those in films or on the
TV.
NEG. ART [a] : The color and brightness of the image is reversed.
SEPIA : The image is sepia.
B&W : The image is monochrome (black-and-white).
SOLARIZE [b] : The light intensity is clearer, and the image looks like an illustration.
SLIM [c] : The image expands vertically.
STRETCH [d] : The image expands horizontally.
PASTEL [e] : The contrast of the image is emphasized, and the image looks like an
animated cartoon.
MOSAIC [f] : The image is mosaic.
(1) Press PICTURE EFFECT in CAMERA mode.
The picture effect indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired picture effect mode.
The indicator changes as follows:
NEG.ART y SEPIA y B&W y SOLARIZE y SLIM y STRETCH y
PASTEL y MOSAIC
To turn the picture effect function off
Press PICTURE EFFECT.
While using the picture effect function
You cannot select OLD MOVIE with DIGITAL EFFECT.
When you turn the power off
The picture effect is automatically canceled.
Using special effects – Picture effect
2
1
NEG. ART
PICTURE
EFFECT
37
Advanced Recording Operations
Using special effects – Digital effect
You can add special effects to recorded images using the various digital functions. The
sound is recorded normally.
STILL
You can record a still images so that it is superimposed on a moving picture.
FLASH (FLASH MOTION)
You can record still images successively at constant intervals.
LUMI. (LUMINANCEKEY)
You can swap a brighter area in a still image with a moving image.
TRAIL
You can record the image so that an incidental image like a trail is left.
SLOW SHTR (SLOW SHUTTER)
You can slow down the shutter speed. The slow shutter mode is good for recording
dark images more brightly. However, the image may be less clear.
OLD MOVIE
You can add an old movie type atmosphere to images. Your camcorder automatically
sets the wide mode to ON, picture effect to SEPIA, and the appropriate shutter speed.
STILL
LUMI.
Still image Moving image
Still image Moving image
38
(1) Press DIGITAL EFFECT in CAMERA mode. The digital effect indicator
appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL y SLOW SHTR y OLD MOVIE
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
In the STILL and LUMI. modes, the still image is stored in memory.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect as follows:
STILL – The rate of the still image you want to superimpose on the moving
image
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the still image which is to be
swapped with a moving image
TRAIL – The vanishing time of the incidental image
SLOW SHTR – Shutter speed. The larger the shutter speed number, the
slower the shutter speed.
OLD MOVIE – No adjustment necessary
The more bars there are on screen, the stronger the digital effect. The bars
appear in the following modes: STILL, FLASH, LUMI. and TRAIL.
To cancel the digital effect
Press DIGITAL EFFECT.
Using special effects – Digital effect
3
4
LUMI.
1
2
LUMI.
DIGITAL
EFFECT
39
Advanced Recording Operations
Using special effects – Digital Effect
Notes
The following functions do not work during digital effect:
– Fader
– Low lux mode of PROGRAM AE
Tape photo recording
Super NightShot
The following functions do not work in the slow shutter mode:
– Exposure
– PROGRAM AE
The following functions do not work in the old movie mode:
– Exposure
– Wide mode
– Picture effect
– PROGRAM AE
When you turn the power off
The digital effect is automatically canceled.
When recording in the slow shutter mode
Auto focus may not be effective. Focus manually using a tripod.
Shutter speed
Shutter speed number Shutter speed
SLOW SHTR 1 1/30
SLOW SHTR 2 1/15
SLOW SHTR 3 1/8
SLOW SHTR 4 1/4
40
Using the PROGRAM AE function
You can select PROGRAM AE (Auto Exposure) mode to suit your specific shooting
requirements.
Spotlight mode
This mode prevents people’s faces, for example, from appearing excessively white
when shooting subjects lit by strong light in the theater.
Soft portrait mode
This mode brings out the subject while creating a soft background for subjects such as
people or flowers.
Sports lesson mode
This mode minimizes shake on fast-moving subjects such as in tennis or golf.
Beach & ski mode
This mode prevents people’s faces from appearing dark in strong light or reflected light,
such as at a beach in midsummer or on a ski slope.
Sunset & moon mode
This mode allows you to maintain atmosphere when you are recording sunsets, general
night views, fireworks displays and neon signs.
Landscape mode
This mode is for when you are recording distant subjects such as mountains and
prevents your camcorder from focusing on glass or metal mesh in windows when you
are recording a subject behind glass or a screen.
Low lux mode
This mode makes subjects brighter in insufficient light.
41
Advanced Recording Operations
(1) Press PROGRAM AE in CAMERA or MEMORY (DCR-TRV320 only) mode.
The PROGRAM AE indicator appears.
(2) Turn the SEL/PUSH EXEC dial to select the desired mode.
The indicator changes as follows:
To turn the PROGRAM AE function off
Press PROGRAM AE.
Notes
In the spotlight, sports lesson and beach & ski modes, you cannot take close-ups. This
is because your camcorder is set to focus only on subjects in the middle to far distance.
In the sunset & moon and landscape modes, your camcorder is set to focus only on
distant subjects.
The following functions do not work in the PROGRAM AE mode:
Slow shutter
– Old movie
– Bounce
The following functions do not work in the low lux mode:
Digital effect
Overlap
Wipe
Dot
Exposure
While setting the NIGHTSHOT to ON, the PROGRAM AE function does not work.
(The indicator flashes.)
While shooting in MEMORY mode, the low lux mode does not work. (The indicator
flashes.) (DCR-TRV320 only)
If you are recording under a discharge tube such as a fluorescent lamp, sodium
lamp or mercury lamp
Flickering or changes in color may occur in the following modes. If this happens, turn
the PROGRAM AE function off.
Soft portrait mode
Sports lesson mode
1
PROGRAM
2
A
Using the PROGRAM AE function
42
You can manually adjust and set the exposure.
Adjust the exposure manually in the following cases:
The subject is backlit
Bright subject and dark background
To record dark pictures (e.g. night scenes) faithfully
(1) Press EXPOSURE in CAMERA or MEMORY (DCR-TRV320 only) mode.
The exposure indicator appears on the LCD screen or in the viewfinder.
(2) Turn the SEL/PUSH EXEC dial to adjust the brightness.
To return to the automatic exposure mode
Press EXPOSURE.
Notes
When you adjust the exposure manually, the following function and modes do not
work in CAMERA mode:
– Backlight
– Old movie
Slow shutter
When you adjust the exposure manually, the backlight function does not work in
MEMORY (DCR-TRV320 only) mode.
Your camcorder automatically returns to the automatic mode:
if you change the PROGRAM AE mode
if you slide NIGHTSHOT to ON
Adjusting the exposure manually
1
2
EXPOSURE
43
Advanced Recording Operations
You can gain better results by manually adjusting the focus in the following cases:
•The autofocus mode is not effective when shooting:
subjects through glass coated with water droplets.
horizontal stripes.
subjects with little contrast with backgrounds such as walls and sky.
•When you want to change the focus from a subject in the foreground to a subject in the
background.
Shooting a stationary subject when using a tripod.
(1) Set FOCUS to MANUAL in CAMERA or MEMORY (DCR-TRV320 only)
mode. The 9 indicator appears on the LCD screen or in the viewfinder.
(2) Turn the focus ring to sharpen focus.
To return to the autofocus mode
Set FOCUS to AUTO.
To record distant subjects
When you press FOCUS down to INFINITY. The lens focuses on infinity and
indicator appears. When you release FOCUS, your camcorder returns to the manual
focus mode. Use this mode when your camcorder focuses on near objects even though
you are trying to shoot a distant object.
To focus precisely
Adjust the zoom by first focusing at the “T” (telephoto) position and then shooting at
the “W” (wide-angle) position. This makes focusing easier.
When you shoot close to the subject
Focus at the end of the “W” (wide-angle) position.
9 changes to the following indicators:
when recording a distant subject.
when the subject is too close to focus on.
Focusing manually
2
FOCUS
44
Superimposing a title
You can select one of eight preset titles and two custom titles (p. 46). You can also select
the language, color, size and position of titles.
(1) Press TITLE to display the title menu in the standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
The titles are displayed in the language you selected.
(4) Change the color, size, or position, if necessary.
1 Turn the SEL/PUSH EXEC dial to select the color, size, or position, then
press the dial. The item appears.
2 Turn the SEL/PUSH EXEC dial to select the desired item, then press the
dial.
3 Repeat steps 1 and 2 until the title is laid out as desired.
(5) Press the SEL/PUSH EXEC dial again to complete the setting.
(6) Press START/STOP to start recording.
(7) When you want to stop recording the title, press TITLE.
1
2
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
[TITLE] : END
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
RETURN
[TITLE] : END
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
RETURN
[TITLE] : END
TITLE
VACATION
[TITLE] : END
SIZE SMALL
[TITLE] : END
TITLE
VACATION
SIZE LARGE
VACATION
3
4
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
[TITLE] : END
TITLE
VACATION
45
Advanced Recording Operations
To superimpose the title while you are recording
Press TITLE while you are recording, and carry out steps 2 to 5. When you press the
SEL/PUSH EXEC dial at step 5, the title is recorded.
To select the language of a preset title
If you want to change the language, select before step 2. Then select the desired
language and return to step 2.
If you display the menu while superimposing a title
The title is not recorded while the menu is displayed.
To use the custom title
If you want to use the custom title, select in step 2.
If you have not made any custom title, “– – – – ...” appears on the display.
Title setting
The title color changes as follows :
WHITE y YELLOW y VIOLET y RED y CYAN y GREEN y BLUE
The title size changes as follows :
SMALL y LARGE
You cannot input more than 12 characters in LARGE size.
The title position changes as follows :
1y 2y 3y 4y 5y 6y 7y 8y 9
The larger the position number, the lower the title is positioned.
When you select the title size LARGE, you cannot choose position 9.
When you are selecting and setting the title
You cannot record the title displayed on the screen.
When you superimpose a title while you are recording
The beep does not sound.
While you are playing back
You can superimpose a title. However, the title is not recorded on tape.
You can record a title when you dub a tape connecting your camcorder to the VCR with
the A/V connecting cable. If you use the i. LINK cable instead of the A/V connecting
cable, you cannot record the title.
Superimposing a title
46
12
3
4
6
12
34
TITLE SET
CUSTOM1
CUSTOM2
[TITLE] : END
"––––––––––
··"
"––––––––––
··"
TITLE SET
––––––––––––––––––––
––––––––––––––––––––
RETURN
[TITLE] : END
TITLE SET
––––––––––––––––––––
––––––––––––––––––––
RETURN
[TITLE] : END
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
[TITLE] : END
TITLE SET
––––––––––––––––––––
[TITLE] : END
TITLE SET
––––––––––––––––––––
[TITLE] : END
TITLE SET
––––––––––––––––––––
[TITLE] : END
TITLE SET
––––––––––––––––––––
[TITLE] : END
TITLE SET
S
–––––––––––––––––––
[TITLE] : END
TITLE
Making your own titles
You can make up to two titles and store them in your camcorder. Each title can have up
to 20 characters.
(1) Press TITLE in the standby or VTR mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select the first line (CUSTOM1) or second
line (CUSTOM2), then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(6) Repeat steps 4 and 5 until you have selected all characters and completed the
title.
(7) To finish making your own titles, turn the SEL/PUSH EXEC dial to select
[SET], then press the dial. The title is stored in memory.
(8) Press TITLE to make the title menu disappear.
47
Advanced Recording Operations
To change a title you have stored
In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change,
then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then
press the dial to delete the title. The last character is erased. Enter the new title as
desired.
If you take 3 minutes or longer to enter characters in the standby mode while a
cassette is in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHARGE) once, and turn it to CAMERA
again, then proceed from step 1.
We recommend setting the POWER switch to VTR or removing the cassette so that your
camcorder does not automatically turn off while you are entering title characters.
If you select [ ]
The menu for selecting alphabet and Russian characters appear. Select [ ] to return
to the previous screen.
To erase a character
Select [C]. The last character is erased.
To enter a space
Select [Z& ?!] , then select the blank part.
Making your own titles
48
You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased. Use the Remote Commander for this operation.
(1) While your camcorder is in the standby mode, keep pressing EDITSEARCH,
and release the button at the insert end point [b].
(2) Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and
the counter resets to zero.
(3) Keep pressing the – 7 side of EDITSEARCH and release the button at the
insert start point [a].
(4) Press START/STOP to start recording. The scene is inserted. Recording stops
automatically near the counter zero point. Your camcorder returns to the
standby mode.
Notes
The zero set memory function works only for tapes recorded in the Digital8 system.
The picture and the sound may be distorted at the end of the inserted section when it
is played back.
If a tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.
Inserting a scene
ZERO SET
MEMORY
EDITSEARCH
[a]
[b]
49
Advanced Playback Operations
NEG. ART
PICTURE
EFFECT
During playback, you can process a scene using the picture effect functions: NEG.ART,
SEPIA, B&W and SOLARIZE.
During playback, press PICTURE EFFECT and turn the SEL/PUSH EXEC dial until the
desired picture effect indicator (NEG.ART, SEPIA, B&W or SOLARIZE) appears.
For details of each picture effect function, see page 36.
To cancel the picture effect function
Press PICTURE EFFECT.
Notes
The picture effect function works only for tapes recorded in the Digital8 system.
You cannot process externally input scenes using the picture effect function.
You cannot record pictures that you have processed using the picture effect function
with this camcorder. To record pictures that you have processed using the picture
effect function, record the pictures on the VCR using your camcorder as a player.
Pictures processed by the picture effect function
Pictures processed by the picture effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF (CHARGE) or stop playing back
The picture effect function is automatically canceled.
— Advanced Playback Operations —
Playing back a tape with picture effects
50
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial
until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL)
flashes.
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the bars appear. In the STILL or
LUMI. mode, the image where you press the SEL/PUSH EXEC dial is stored in
memory as a still image.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 37.
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
The digital effect function works only for tapes recorded in the Digital8 system.
You cannot process externally input scenes using the digital effect function.
You cannot record images that you have processed using the digital effect function
with this camcorder. To record images that you have processed using the digital effect
function, record the images on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF (CHARGE) or stop playing back
The digital effect function is automatically canceled.
Playing back a tape with digital effects
2
3
1
2
STILL
DIGITAL
EFFECT
STILL
51
Advanced Playback Operations
You can enlarge moving and still images recorded on tapes.
Besides the operation described here, your camcorder can enlarge still images recorded
on “Memory Stick”s (DCR-TRV320 only).
(1) Press PB ZOOM on your camcorder while you are playing back. The image is
enlarged, and R r appears on the LCD screen or in the viewfinder.
(2) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
R : The image moves downwards
r : The image moves upwards
T t becomes available.
(3) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
T :The image moves rightward (Turn the dial downwards.)
t :The image moves leftward (Turn the dial upwards.)
To cancel PB ZOOM function
Press PB ZOOM.
Notes
PB ZOOM works only for tapes recorded in the Digital8 system.
You cannot process externally input scenes using PB ZOOM function.
You cannot record pictures that you have processed using PB ZOOM function with
this camcorder. To record pictures that you have processed using PB ZOOM function,
record the pictures on the VCR using your camcorder as a player.
Pictures processed by PB ZOOM function
Pictures processed by PB ZOOM function are not output through the DV IN/OUT
jack.
When you set the POWER switch to OFF (CHARGE) or stop playing back
PB ZOOM function is automatically canceled.
Enlarging recorded images – PB ZOOM
2
PB ZOOM
[
EXEC
]
: T t
3
PB ZOOM
[
EXEC
]
: r R
1
PB ZOOM
52
Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward to automatically stop at a desired scene
having a counter value of “0:00:00”. Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The counter
shows “0:00:00” and the ZERO SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter’s zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
The zero set memory function works only for tapes recorded in the Digital8 system.
When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function will be canceled.
There may be a discrepancy of several seconds from the time code.
If a tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.
ZERO SET MEMORY functions also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
ZERO SET MEMORY
DISPLAY
53
Advanced Playback Operations
[a][b][c]
JUL 5 2000JUL 4 2000 DEC 31 2000
You can automatically search for the point where the recording date changes and start
playback from that point (Date search). Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
(1) Set the POWER switch to VTR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the date
search indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
(3) When the current position is [b], press . to search towards [a] or press >
to search towards [c]. Your camcorder automatically starts playback at the
point where the date changes.
Each time you press . or >, the camcorder searches for the previous or
next date.
To stop searching
Press x.
Searching a recording by date
– Date search
3
=+
2
SEARCH
MODE
DATE
00
SEARCH
DATE
01
SEARCH
54
Searching a recording by date – Date search
Notes
The date search works only for tapes recorded in the Digital8 system.
If one day’s recording is less than two minutes, your camcorder may not accurately
find the point where the recording date changes.
If a tape has a blank portion in the recorded portions
The date search function may not work correctly.
55
Advanced Playback Operations
You can search for the still image recorded on tape (photo search).
You can also search for still images one after another and display each image for five
seconds automatically (photo scan). Use the Remote Commander for these operations.
Searching for a photo
(1)Set the POWER switch to VTR.
(2)Press SEARCH MODE on the Remote Commander repeatedly, until the photo
search indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
(3)Press . or > to select the photo for playback. Each time you press . or >,
the camcorder searches for the previous or next photo. Your camcorder
automatically starts playback from the photo.
To stop searching
Press x.
Searching for a photo
– Photo search/Photo scan
3
=+
PHOTO
01
SEARCH
2
SEARCH
MODE
PHOTO
00
SEARCH
56
Searching for a photo – Photo search/Photo scan
Scanning photo
(1)Set the POWER switch to VTR.
(2)Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan
indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
(3)Press . or >.
Each photo is played back for about 5 seconds automatically.
To stop scanning
Press x.
Note
The photo search and photo scan work only for tapes recorded in the Digital8 system.
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
3
=+
2
SEARCH
MODE
PHOTO
00
SCAN
57
Editing
Using the A/V connecting cable
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to LINE. Refer to the operating instructions
of your VCR for more information.
(3) Set the POWER switch to VTR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Be sure to clear the indicators from the screen
If they are displayed, press the following buttons not to record the indicators on the
dubbed tape:
DISPLAY.
DATE CODE.
SEARCH MODE on the Remote Commander.
You can edit on VCRs that support the following systems:
8 mm, Hi8, VHS, S-VHS, VHSC, S-VHSC, Betamax,
ED Betamax, mini DV, DV or Digital8
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and the red plug is connected, the
right channel audio is output.
If your VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR.
: Signal flow
— Editing —
Dubbing a tape
S VIDEO
AUDIO
/
VIDEO
AUDIO
VIDEO
S VIDEO
IN
58
Using the i.LINK cable (DV connectig cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to
DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital
connection, video and audio signals are transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the
operating instructions of your VCR for more information.
(3) Set the POWER switch to VTR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR for more information.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Note on tapes that are not recorded in the Digital8 system
The picture may fluctuate. This is not a malfunction.
During playback of tapes recorded in the Hi8/standard 8 system
Digital signals are output as the image signals from the DV IN/OUT jack.
You can connect one VCR only using the i.LINK cable (DV connecting cable).
See page 102 for details about i.LINK.
During digital editing
You cannot use PICTURE EFFECT or DIGITAL EFFECT button function.
If you record playback pause picture via the DV IN/OUT jack
The recorded picture becomes rough. Also, when you play back the recorded pictures
on other video equipment, the picture may jitter.
S VIDEO LANC
DV
Dubbing a tape
DV IN/OUT
DV IN/OUT
: Signal flow
(not supplied)
59
Editing
Using with analog video unit and PC
– Signal convert function
You can capture images and sound from an analog video unit connecting a PC which
has the i. LINK (DV) jack to your camcorder.
Analog video signals t Digital video signals
(1) Set the POWER switch to VTR.
(2) Set A/V t DV OUT to ON in the menu settings. (P. 64)
(3) Start playback on the analog video unit.
(4) Start capturing procedures on your PC.
The operation procedures depend on your PC and the software which you use.
For details on how to capture images, refer to the instruction manual of the
software.
After capturing images and sound
Stop capturing procedures on your PC, and stop the playback on the analog video unit.
Notes
You need to install software which can exchange video signals.
Depending on the condition of the analog video signals, the PC may not be able to
output the images correctly when you convert analog video signals into digital video
signals via your camcorder. Depending on the analog video unit, the image may
contain noise or incorrect colors.
You cannot record or capture the video output via your camcorder when the video
includes copyright protection signals such as ID-2 system.
DV
VIDEO
AUDIO
S VIDEO
IN
AUDIO
/
VIDEO
DV IN/OUT
: Signal flow
(not supplied)
VIDEO
AUDIO
60
Recording video or TV programs
Using the A/V connecting cable
You can record a tape from another VCR or a TV program from a TV that has video/
audio outputs. Use your camcorder as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VTR.
(3) Set DISPLAY to LCD in the menu settings (p. 64).
(4) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(5) Press N on the VCR to start playback if you are recording a tape from VCR.
Select a TV program if you are recording from TV.
The picture from a TV or VCR appears on the LCD screen or in the viewfinder.
(6) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Notes
To enable smooth transition, we recommend that you do not mix pictures recorded in
the Hi8/standard 8 with the Digital8 system on a tape.
If you fast-forward or slow-playback on the other equipment, the image being
recorded may fluctuate. When recording from other equipment, be sure to play back
the original tape at normal speed.
If your TV or VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video output jack and the
white or the red plug to the audio output jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and the red plug is connected, the
right channel audio is output.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or VCR.
: Signal flow
S VIDEO
AUDIO/VIDEO
S VIDEO
VIDEO
AUDIO
OUT
4
PAUSE
REC
61
Editing
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to
DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital
connection, video and audio signals are transmitted in digital form for high-quality
editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
and insert the recorded tape into the VCR.
(2) Set the POWER switch to VTR.
(3) Set DISPLAY to LCD in the menu settings (p. 64).
(4) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(5) Press N on the VCR to start playback.
The picture from a TV or VCR appears on the LCD screen or in the viewfinder.
(6) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable (DV connecting cable).
During digital editing
The color of the display may be uneven. However this does not affect the dubbed
picture.
If you record playback pause picture with the DV IN/OUT jack
The recorded picture becomes rough. And when you play back the picture using your
camcorder, the picture may jitter.
Before recording
Make sure if the DV IN indicator appears on the LCD screen or in the viewfinder by
pressing DISPLAY. The DV IN indicator may appear on both equipment.
DV IN/OUT
DV IN/OUT
: Signal flow
Recording video or TV programs
(not supplied)
S VIDEO LANC
DV
62
Inserting a scene from a VCR
– Insert Editing
You can insert a new scene from a VCR onto your originally recorded tape by
specifying the insert start and end points.
Use the Remote Commander for this operation.
Connections are the same as in “Recording video or TV programs” on page 60, 61.
Insert a cassette containing the desired scene to insert into the VCR.
[a]
[b]
[c]
63
Editing
To change the insert end point
Press ZERO SET MEMORY again after step 5 to erase the ZERO SET MEMORY
indicator and begin from step 3.
Notes
The zero set memory function works only for tapes recorded in the Digital8 system.
The picture and sound recorded on the section between the insert start and end points
will be erased when you insert the new scene.
When the inserted picture is played back
The picture may be distorted at the end of the inserted section. This is not a
malfunction.
To insert a scene without setting the insert end point
Skip step 3 and 4. Press x when you want to stop inserting.
Inserting a scene from a VCR – Insert Editing
(1)Set the POWER switch to VTR.
(2)On the VCR, locate just before the insert start point [a], then press X to set the VCR
to the playback pause mode.
(3)On your camcorder, locate the insert end point [c] by pressing m or M. Then
press X to set it to the playback pause mode.
(4)Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY
indicator flashes and the end point of the insert is stored in memory.
(5)On your camcorder, locate the insert start point [b] by pressing m, then press
z REC and the button on its right simultaneously to set your camcorder to the
recording pause mode.
(6)First press X on the VCR, and after a few seconds press X on your camcorder to
start inserting the new scene.
Inserting automatically stops near the zero point on the counter. Your camcorder
automatically stops. The end point [c] of the insert stored in memory is canceled.
4
0:00:00
ZERO SET
MEMORY
ZERO SET
MEMORY
5
REC
64
2
3
4
MANUAL SET
AUTO SHTR
OTHERS
WORLD TIME
BEEP
0 HR
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
RETURN
ON
OFF
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
RETURN
ON
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
RETURN
OFF
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
0 HR
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
ON
OFF
1
MENU
MANUAL SET
AUTO SHTR
[
MENU
]
:
END
VTR SET
H
i
F
i SOUND
TBC
DNR
AUDIO MIX
PB MODE
A/VtDV OUT
[
MENU
]
:
END
CAMERA SET
D ZOOM
STEADYSHOT
N. S. LIGHT
[
MENU
]
:
END
CAMERA
MEMORY
VTR
— Customizing Your Camcorder —
Changing the menu settings
To change the mode settings in the menu settings, select the menu items with the SEL/
PUSH EXEC dial. The default settings can be partially changed.
First, select the icon, then the menu item and then the mode.
(1) In CAMERA, VTR or MEMORY (DCR-TRV320 only) mode, press MENU.
(2) Turn the SEL/PUSH EXEC dial to select the desired icon, then press the dial to
set.
(3) Turn the SEL/PUSH EXEC dial to select the desired item, then press the dial to
set.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode, and press the dial
to set.
(5) If you want to change other items, select
RETURN and press the dial, then
repeat steps from 2 to 4.
For details, see “Selecting the mode setting of each item” (p. 65).
To make the menu display disappear
Press MENU.
(DCR-TRV320 only)
65
Customizing Your Camcorder
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VTR SET
LCD SET
MEMORY SET (DCR-TRV320 only)
TAPE SET
SETUP MENU
OTHERS
Selecting the mode setting of each item z is the default setting.
Menu items differ according to the position of the POWER switch.
The LCD screen and the viewfinder show only the items you can operate at the
moment.
Changing the menu settings
Icon/item
AUTO SHTR
D ZOOM
16:9WIDE
STEADYSHOT
N.S. LIGHT
Mode
z ON
OFF
z OFF
50×
450×
z OFF
ON
z ON
OFF
z ON
OFF
Meaning
To automatically activate the electronic shutter
when shooting in bright conditions
To not automatically activate the electronic
shutter even when shooting in bright conditions
To deactivate digital zoom. Up to 25× zoom is
carried out.
To activate digital zoom. More than 25× to 50×
zoom is performed digitally. (p. 18)
To activate digital zoom. More than 25× to 450×
zoom is performed digitally. (p. 18)
To record a 16:9 wide picture (p. 32)
To compensate for camera-shake
To cancel the SteadyShot function. Natural
pictures are produced when shooting a stationary
object with a tripod.
To use the NightShot Light function (p. 20)
To cancel the NightShot Light function
POWER
switch
CAMERA
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
CAMERA
MEMORY
Notes on the SteadyShot function
The SteadyShot function will not correct excessive camera-shake.
Attachment of a conversion lens (not supplied) may influence the SteadyShot
function.
If you cancel the SteadyShot function
The SteadyShot off indicator appears. Your camcorder prevents excessive
compensation for camera-shake.
66
Changing the menu settings
Icon/item
HiFi SOUND
TBC*
TBC stands for “Time Base Corrector”.
DNR*
DNR stands for “Digital Noise Reduction”.
AUDIO MIX
PB MODE
A/V t DV OUT
Mode
z STEREO
1
2
z ON
OFF
z ON
OFF
———
z AUTO
/
z OFF
ON
Meaning
To play back a stereo tape or dual sound track
tape with main and sub sound
To play back a stereo tape with the left sound
or a dual sound track tape with main sound
To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
To correct jitter
To not correct jitter. Set TBC to OFF when
playing back a tape on which you have dubbed
over and recorded the signal of a TV game or
similar machine.
To reduce picture noise
To reduce a conspicuous afterimage when the
picture has a lot of movement
To adjust the balance between the stereo 1 and
stereo 2
To automatically select the system (Hi8/
standard 8 or Digital8 ) that was used to
record on the tape, and play back the tape
To play back a tape that was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
To convert digital video signals into analog
video signals via your camcorder.
To convert analog video signals into digital
video siginals via your camcorder. “A/V t
DV” appears on the LCD screen or in the
viewfinder.
(P. 59)
POWER
switch
VTR
VTR
VTR
VTR
VTR
VTR
* When you play back tapes recorded in the Hi8/standard 8 system only.
Notes on AUDIO MIX
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
You can adjust the balance only for tapes recorded in the Digital8 system.
Note on PB MODE
The mode will return to the default setting when:
you remove the battery pack or power source.
you turn the POWER switch.
ST1 ST2
67
Customizing Your Camcorder
Changing the menu settings
Icon/item
LCD B. L.
LCD COLOR
CONTINUOUS*
QUALITY*
FLD./FRAME*
PRINT MARK*
PROTECT*
SLIDE SHOW*
DELETE ALL*
FORMAT*
PHOTO SAVE*
Mode
z BRT NORMAL
BRIGHT
z OFF
MULTI SCRN
z FINE
STANDARD
z FIELD
FRAME
z OFF
ON
z OFF
ON
z RETURN
FORMAT
Meaning
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the color on the LCD screen, turning
the SEL/PUSH dial to adjust he following bar.
Not to record continuously
To record 9 images continuously (p. 78)
To record still images in the fine image quality
mode, using the “Memory Stick”
To record still images in the standard image
quality mode, using the “Memory Stick”
To record moving subjects
To record stopping subjects in high quality
To cancel print marks on still images.
To write a print mark on the recorded still
images you want to print out later
Not to protect still images
To protect selected still images against
accidental erasure (p. 97)
To play back images in a continuous loop
(p. 95)
To delete all the images (p. 99)
To cancel formatting.
To format an inserted “Memory Stick.”
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC dial to select
FORMAT, then press the dial.
3. After “EXECUTE” appears, press the SEL/
PUSH EXEC dial. “FORMATTING” appears
during formatting. “COMPLETE” appears
when formatting is finished.
To duplicate still images (p. 87)
POWER
switch
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
* DCR-TRV320 only
Notes on LCD B.L.
When you select BRIGHT, battery life is reduced by about 10 percent during recording.
When you use power sources other than the battery pack, BRIGHT is automatically
selected.
Notes on formatting
Supplied or optional “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
Do not turn the POWER switch or press any button while the display shows
FORMATTING.
You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set
to LOCK.
Format again if the message “ ” appears.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting.
Formatting erases sample images on the “Memory Stick.”
Formatting erases the protected image data on the “Memory Stick.”
to lighten
to darken
68
Changing the menu settings
Icon/item
REC MODE
AUDIO MODE
q REMAIN
DATA CODE
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
z DATE/CAM
DATE
Meaning
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the
SP mode
To record or play back in the 12-bit mode (two
stereo sounds)
To record or play back in the 16-bit mode (the
one stereo sound with high quality)
To display the remaining tape bar:
for about 8 seconds after your camcorder is
turned on and calculates the remaining
amount of tape
for about 8 seconds after a cassette is inserted
and your camcorder calculates the remaining
amount of tape
for about 8 seconds after N is pressed in
VTR mode
for about 8 seconds after DISPLAY is pressed
to display the screen indicators
for the period of tape rewinding, forwarding
or picture search in the VTR mode
To always display the remaining tape bar
To display date, time and recording data
during playback
To display date and time during playback
POWER
switch
VTR
CAMERA
VTR*
CAMERA
VTR
CAMERA
VTR
Note on REC MODE
When you record on the standard 8 tape, your camcorder records in the SP mode
even you select the LP mode in the menu settings. In this case, the indicator “8mm
TAPE t SP REC, Hi8 TAPE t LP/SP REC” appears on the LCD screen or in the
viewfinder. Use the Hi8 tapes for the LP mode.
Notes on the LP mode
When you record a tape in the LP mode on your camcorder, we recommend playing
the tape on your camcorder. When you play back the tape on other camcorders or
VCRs, noise may occur in images or sound.
When you record in the SP and LP modes on one tape or you record some scenes in
the LP mode, the playback image may be distorted or the time code may not be
written properly between scenes.
Note on AUDIO MODE
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in
AUDIO MIX.
*To dub a tape to another VCR
You cannot select AUDIO MODE for tapes recorded in the Digital8 system. You,
however, can select AUDIO MODE when you dub tapes recorded in the Hi8/standard
8 system to another VCR using the i.LINK cable.
69
Customizing Your Camcorder
Changing the menu settings
Icon/item
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
Mode
———
z OFF
ON
z VIDEO1
VIDEO2
VIDEO3
OFF
z NORMAL
2×
z ON
OFF
Meaning
To reset the date or time (p. 71)
To automatically turn on the Sony TV when
using the super laser link function
To switch the video input on a Sony TV when
using the super laser link function (p. 28)
To display selected menu items in normal size
To display selected menu items at twice the
normal size
To make the demonstration appear
To cancel the demonstration mode
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
Notes on DEMO MODE
You cannot select DEMO MODE when a cassette is inserted in your camcorder.
DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts
about 10 minutes after you have set the POWER switch to CAMERA without a
cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than
CAMERA, or set DEMO MODE to OFF.
When NIGHTSHOT is set to ON, the “NIGHTSHOT” indicator appears on the LCD
screen or in the viewfinder and you cannot select DEMO MODE in the menu settings.
70
Changing the menu settings
Icon/item
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
Mode
———
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
z BL OFF
BL ON
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the
originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
To output the beep instead of the melody
To cancel all sound including shutter sound
To activate the Remote Commander supplied
with your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control
To show the display on the LCD screen and in
the viewfinder
To show the display on the TV screen, LCD
screen and in the viewfinder
To light up the camera recording lamp at the
front of your camcorder
To turn the camera recording lamp off so that
the subject is not aware of the recording
To turn off the backlight on display window
To turn on the backlight
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
MEMORY
VTR
CAMERA
MEMORY
Note
If you press DISPLAY with DISPLAY set to “V-OUT/LCD” in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR. (Except when your camcorder is
connected with the i.LINK cable.)
In more than 5 minutes after removing the power source
The AUDIO MIX, COMMANDER and HiFi SOUND items are returned to their default
settings.
The other menu items are held in memory even when the battery is removed, as long as
the lithium battery is installed.
Notes on INDICATOR
When you select BL ON, battery life is reduced by about 10 percent during recording.
When you use power sources other than the battery pack, BL ON is automatically
selected.
71
Customizing Your Camcorder
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
[MENU] : END
1999
JAN
1
12 00
AM
2
4
2000
JAN
1
12 00
AM
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
1,
7
3
[MENU] : END
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
JAN
1 1999
12:00:00
AM
6
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
[MENU] : END
2000
JUL
4
5 30
PM
[MENU] : END
SETUP MENU
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
JUL
4 2000
5:30:00
PM
MENU
2000
JAN
1
12 00
AM
Resetting the date and time
The default clock setting is set to East Coast Standard Time.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the menu
settings.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu settings disappear.
The year changes as follows:
If you do not set the date and time
“--- -- ----” “– –:– –:– –” is recorded on the tape and the “Memory Stick”
(DCR-TRV320 only).
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
12:00 AM stands for midnight.
12:00 PM stands for noon.
1999 ˜ 2000 N · · · · n 2029
72
– DCR-TRV320 only
You can record and play back still images on the “Memory Stick” supplied with your
camcorder. You can easily play back, record or delete still images. You can exchange
image data with other equipment such as a personal computer etc., using the serial port
adaptor for “Memory Stick” (not supplied) or PC card adaptor for “Memory Stick” (not
supplied).
On file format (JPEG)
Your camcorder compresses image data in JPEG format (extension .jpg).
Typical image data file name
100-0001 : This file name appears on the LCD screen or in the viewfinder of your
camcorder.
Dsc00001.jpg : This file name appears on the display of your personal computer.
Before using “Memory Stick”
You cannot record or erase still images when the write-protect tab on the “Memory
Stick” is set to LOCK.
We recommend backing up important data.
•Image data may be damaged in the following cases:
If you remove the “Memory Stick”, turn the power off, or detach the battery for
replacement when the access lamp is flashing
If you use “Memory Stick”s under circumstances affected by static electricity or
magnetic field.
Prevent metallic objects or your finger from coming into contact with the metal parts
of the connecting section.
Stick its label on the labeling position.
Do not bend, drop or apply strong shock to “Memory Stick”s.
Do not disassemble or modify “Memory Stick”s.
Do not let “Memory Stick”s get wet.
Do not use or keep “Memory Stick”s in locations that are:
Extremely hot such as in a car parked in the sun or under the scorching sun
Under direct sunlight
Very humid or subject to corrosive gases
When you carry or store a “Memory Stick”, put it in its case.
— “Memory Stick” operations —
Using “Memory Stick”–introduction
Terminal
Write-protect tab
Labeling position
73
“Memory Stick” operations
Formatting the supplied “Memory Stick”
Formatting with this camcorder is not required. The “Memory Stick” has been
formatted in the FAT-format at factory.
“Memory Stick” supplied with your camcorder
Sample images are recorded in the “Memory Stick” (p. 84). Note that these images will
be deleted if you format the “Memory Stick.”
Stick the supplied label on the labeling position to prevent the accidental erasure. As
for the labeling position, see the illustration on the previous page.
“Memory Stick”s formatted by a computer
“Memory Stick”s formatted by Windows OS or Macintosh computers do not have a
guaranteed compatibility with this camcorder.
Notes on image data compatibility
Image data files recorded on “Memory Stick”s by your camcorder conform with the
Design Rules for Camera File Systems universal standard established by the JEIDA
(Japan Electronic Industry Development Association). You cannot play back on your
camcorder still images recorded on other equipment (DCR-TRV890E/TRV900/
TRV900E or DSC-D700/D770) that does not conform with this universal standard.
(These models are not sold in some areas.)
If you cannot use the “Memory Stick” that has been used on other equipment, format
the “Memory Stick” on your camcorder following the steps on page 67. Note that all
images on the “Memory Stick” will be deleted if you format it.
“Memory Stick” and are trademarks of Sony Corporation.
Using “Memory Stick”–introduction
74
Inserting “Memory Stick”
(1) Open the lid of the cassette compartment.
(2) Insert the “Memory Stick” with the v mark facing toward the “Memory Stick”
compartment as illustrated until it clicks.
(3) Close the lid of the cassette compartment.
To eject the “Memory Stick”
Open the lid of the cassette compartment, then press the “Memory Stick” once lightly.
The “Memory Stick” pops up.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. Do not turn the power off , eject the “Memory
Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.
2
Using “Memory Stick”–introduction
“Memory Stick”
compartment
access lamp
75
“Memory Stick” operations
Using “Memory Stick”–introduction
Selecting image quality mode
You can select image quality mode in still image recording. Default setting is FINE.
(1) Set the POWER switch to VTR or MEMORY. Make sure that the LOCK is set to
the right (unlock) position.
(2) Press MENU to make the menu display appear.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
(6) Press MENU to erase the menu display.
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the types of images you are shooting.
1
2,6
3
4
5
MENU
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
STANDARD
OFF
F
I
NE
STANDARD
76
Using “Memory Stick”–introduction
Image quality settings
Setting Meaning
FINE (FINE) Use this mode when you want to record high quality
images. The image is compressed to about 1/6.
STANDARD (STD) This is the standard image quality. The image is
compressed to about 1/10.
Differences in image quality mode
Recorded images are compressed in JPEG format before being stored into memory. The
memory capacity allotted to each image varies depending on the selected image quality
mode. Details are shown in the table below. (The number of pixels is 640 × 480,
regardless of image quality mode. The data size before compression is about 600 KB.)
Image quality mode Memory capacity
FINE About 100 KB
STANDARD About 60 KB
Approximate number of images you can record on a “Memory Stick”
The approximate number of images you can record on a “Memory Stick” formatted
using this camcorder varies depending on which image quality mode you select and the
complexity of the subject.
Maximum number of images you can record on a “Memory Stick”
Setting 4MB 8MB 16MB 32MB 64MB
FINE 40 81 164 329 659
STANDARD 60 122 246 494 988
Note on the image quality mode indicator
This is only displayed during recording.
77
“Memory Stick” operations
– DCR-TRV320 only
You can select the FIELD or FRAME mode in still image recording. Your camcorder
compensates for camera-shake when recording moving subjects in the FIELD mode.
Your camcorder records still images in high quality in the FRAME mode. Select the
FIELD or FRAME in the menu settings (p. 64).
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Keep pressing PHOTO lightly. The green z mark stops flashing, then lights
up. The brightness of the image and focus are adjusted, being targeted for the
middle of the image and are fixed. Recording does not start yet.
(3) Press PHOTO deeper. The image displayed on the screen will be recorded on
the “Memory Stick”. Recording is complete when the bar scroll indicator
disappears.
Notes
When recording fast-moving subjects in the FRAME mode, the recorded image blurry.
When recording in the FRAME mode, your camcorder may not correct camera-shake.
We recommend that you shoot objects with a tripod.
When recording still images at step 2 with the PHOTO button pressed lightly, the
image momentarily flickers. This is not a malfunction.
Before you shoot in autofocus mode, check that the subject is in sharp focus.
The brightness of the picture and focus are adjusted on the center portion of the
image.
3
21 / 40
2
PHOTO
PHOTO
FINE
FINE
1
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
Number of images can be recorded
on the “Memory Stick”
Number of recorded images
Recording still images on “Memory
Stick” – Memory Photo recording
78
Recording still images on “Memory Stick”
– Memory Photo recording
When the POWER switch is set to MEMORY
The following functions do not work:
wide mode, digital effect, picture effect, title, low lux mode of PROGRAM AE.
When you are recording a still image
You can neither turn off the power nor press PHOTO.
When you press the PHOTO button on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording images continuously
You can record still images continuously.
Multi screen mode
You can record 9 still images continuously on a single page.
79
“Memory Stick” operations
Recording still images on “Memory Stick”
– Memory Photo recording
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press MENU to make the menu display appear.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select CONTINUOUS, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(6) Press MENU to erase the menu display.
If the capacity of the “Memory Stick” becomes full
FULL” appears on the LCD screen or in the viewfinder, and you cannot record still
images on the “Memory Stick”
2,6 3
4
5
1
MENU
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
MULT
I SCRN
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
MULT
I SCRN
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
80
Recording still images on “Memory Stick”
– Memory Photo recording
Continuous shooting settings
Setting Meaning (indicator on the screen)
OFF Your camcorder shoots one image at a time. (no indicator)
MULTI SCRN Your camcorder shoots 9 still images at about 0.3 sec intervals and
displays the images on a single page divided into 9 boxes. ( )
Note on using the video flash light (not supplied)
The video flash light does not work in the multi screen mode if you install it to the
accessory shoe.
When recording in the multi screen mode
The image is recorded in the FIELD mode automatically even you select the FRAME
mode in the menu settings.
81
“Memory Stick” operations
Recording still images on “Memory Stick”
– Memory Photo recording
Self-timer memory photo recording
You can record still images on “Memory Stick”s with the self-timer. This mode is useful
when you want to record yourself. You can also use the Remote Commander for this
operation.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press
(self-timer). The (self-timer) indicator appears on the LCD screen
or in the viewfinder.
(3) Press PHOTO firmly.
Self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To cancel self-timer recording
Press (self-timer) so that the indicator disappears from the LCD or viewfinder
screen while your camcorder is in the standby mode.
You cannot stop the recording with the Remote Commander.
Note
The self-timer recording mode is automatically cancelled when:
Self-timer recording is finished.
The POWER switch is set to OFF (CHARGE) or VTR.
1
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
PHOTO
(self-timer)
PHOTO
82
Superimposing a still image in the
“Memory Stick” on a moving image
– MEMORY MIX
– DCR-TRV320 only
You can superimpose a still image you have recorded on the “Memory Stick” on top of
the moving image you are recording.
M. CHROM (Memory chroma key)
You can swap a blue area of a still image such as an illustration or a frame with a
moving image.
M. LUMI (Memory luminance key)
You can swap a brighter area of a still image such as a handwritten illustlation or title
with a moving image. Record a title on the “Memory Stick” before a trip or event for
convenience.
C. CHROM (Camera chroma key)
You can superimpose a moving image on top of a still image such as an image can be
used as background. Shoot the subject against a blue background. The blue area of the
moving image will be swapped with a still image.
M. OVERLAP (Memory overlap)
You can make a moving image fade in on top of a still image.
M. CHROM
Still image Moving image
M. LUMI
Still image Moving image
C. CHROM
Still image Moving image
Blue
Blue
M. OVERLAP
Still image
Still image + Moving image
Moving image
83
“Memory Stick” operations
1
2
4
5
6
1
M. CHROM
M. LUMI
M. LUMI
M. LUMI
III••••
I••••••
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
3
MEMORY MIX
100–0021
100–0021
100–0021
100–0021
Superimposing a still image in the “Memory Stick” on a moving
image – MEMORY MIX
Before operation
Insert a Hi8 /Digital8 tape for recording and a “Memory Stick” into your
camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving image.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
(7) Press START/STOP to start recording.
Still image
84
Superimposing a still image in the “Memory Stick” on a moving
image – MEMORY MIX
To change the still image to superimpose
Do either of the following:
Press MEMORY+/– before step 7.
Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4.
To change the mode setting
Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4.
To cancel M. CHROM/M. LUMI/C. CHROM/M.OVERLAP
Press MEMORY MIX.
During recording
You cannot change the mode setting.
The “Memory Stick” supplied with your camcorder stores 20 images
For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
For C. CHROM: 2 images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 97).
When you select M.OVERLAP
You cannot change the still image or the mode setting.
85
“Memory Stick” operations
Recording an image from a tape as a still
image
– DCR-TRV320 only
Your camcorder can read moving image data recorded on a tape in the Digital8
system, and record it as a still image on a “Memory Stick”. Your camcorder can also
take in moving image data through the input connector and record it as a still image on
a “Memory Stick”.
Before operation
Insert a tape recorded in the Digital8 system and a “Memory Stick” into your
camcorder.
(1) Set the POWER switch to VTR.
(2) Press N. The image recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
CAPTURE appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the “Memory Stick”. Recording is complete when the bar scroll indicator
disappears.
When the acccess lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off , eject the “Memory
Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.
If “ ” appears on the LCD screen or in the viewfinder
The inserted “Memory Stick” is imcompartible with your camcorder because its format
does not comform with your camcorder. Check the format of the “Memory Stick”.
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record the audio from a tape.
Titles superimposed
You cannot record the titles on the “Memory Stick”. However, you can record the titles
which have already been recorded on tapes.
When you press photo on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
12
34
CAPTURE
PLAY
REW
FF
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
PHOTO
PHOTO
86
Recording an image from a tape as a still image
Recording a still image from other equipment
(1) Set the POWER switch to VTR and set DISPLAY to LCD in the menu settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The images from a TV or VCR appear on the LCD screen or in the viewfinder.
(3) Follow the steps 3 and 4 on page 85.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures.
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or VCR.
Using the i.LINK cable (DV connecting cable)
: Signal flow
: Signal flow
(not supplied)
DV OUT
DV IN/OUT
S VIDEO
VIDEO
OUT
TV
VCR
S VIDEO
AUDIO
/
VIDEO
S VIDEO LANC
DV
87
“Memory Stick” operations
Copying still images from a tape
– Photo save
– DCR-TRV320 only
Using the search function, you can automatically take in only still images from tapes
recorded in the Digital8 system and record them on a “Memory Stick” in sequence.
Before operation
Insert a tape recorded in the Digital8 system and rewind the tape.
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VTR.
(2) Press MENU to make the menu display appear.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select PHOTO SAVE, then press the dial.
PHOTO BUTTON appears on the LCD screen or in the viewfinder.
(5) Press PHOTO firmly. The still image from the tape is recorded on the
“Memory Stick”. The number of still images copied is displayed. END is
displayed when copying is completed.
2
3
5
4
1
MENU
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
PHOTO
PHOTO SAVE 0 : 00 : 00 : 00
21 / 40
F
I
NE
SAV
I
NG
0
[
MENU
]
:
END
[
MENU
]
:
END
PHOTO SAVE 0 : 30 : 00 : 00
25 / 40
F
I
NE
END
4
MEMORY SET
QUAL I TY
PR I NT MARK
PROTECT
DELETE ALL
FORMAT
PHOTO SAVE
RETURN
[
MENU
]
:
END
MEMORY SET
QUAL I TY
PR I NT MARK
PROTECT
DELETE ALL
FORMAT
PHOTO SAVE
RETURN
[
MENU
]
:
END
READY
PHOTO SAVE 0 : 00 : 00 : 00
[
PHOTO
]
:
START
[
MENU
]
:
END
21 / 40
F
I
NE
PHOTO BUTTON
F
I
NE
88
To stop copying
Press MENU to stop copying.
When the memory of the “Memory Stick” is full
MEMORY FULL appears on the LCD screen, and the copying stops. Insert another
“Memory Stick” and repeat the procedure from step 2.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. As well do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may
occur.
To record all the images recorded on the tape
Rewind the tape all the way back and start copying.
If the write-protect tab on the “Memory Stick” is set to LOCK
NOT READY appears when you select PHOTO SAVE in the menu settings.
When you change the “Memory Stick” in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick”.
Copying still images from a tape – Photo save
89
“Memory Stick” operations
Viewing a still image
– Memory photo playback
– DCR-TRV320 only
You can play back still images recorded on a “Memory Stick”. You can also play back 6
images at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Open the LCD panel while pressing OPEN.
(3) Press MEMORY PLAY. The last recorded image is displayed.
(4) Press MEMORY +/– to select the desired still image. To see the previous
image, press MEMORY –. To see the next image, press MEMORY +.
To stop memory photo playback
Press MEMORY PLAY.
To play back recorded images on a TV screen
Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder before the operation.
When operating memory photo playback on a TV or the LCD screen, the image
quality may appear to have deteriorated. This is not a malfunction. The image data is
as good as ever.
Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
If “ NO FILE” appears on the LCD screen or in the viewfinder
No image is recorded on the “Memory Stick”.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with your camcorder.
1
3
2
1
4
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
PLAY
90
Viewing a still image – Memory photo playback
Screen indicators during still image playback
Playing back 6 recorded images at a time (index screen)
You can play back 6 recorded images at a time. This function is especially useful when
searching for a particular image.
Press MEMORY INDEX.
A red B mark appears above the image that is displayed before changing to the index
screen mode.
To display the following 6 images, keep pressing MEMORY +.
To display the previous 6 images, keep pressing MEMORY –.
To return to the normal playback screen (single screen)
Press MEMORY +/– to move the B mark to the image you want to display on full
screen, then press MEMORY PLAY.
Data file name
MEMORY INDEX
Image number/Total number of recorded images
Protect indicator
Print mark
21 / 40
MEMORY PLAY
100-0021
MEMORY
PLAY INDEX DELETE
MEMORY MIX
6 / 40
100-0006
1 2 3
4 5 6
B mark
91
“Memory Stick” operations
Viewing a still image – Memory photo playback
Note
When displaying the index screen, the number appears above each image. This
indicates the order in which images are recorded on the “Memory Stick”. These
numbers are different from the data file names.
Files modified with personal computers
These files may not be displayed on the index screen. Image files shot with other
equipment may not be displayed on the index screen either.
Viewing the recorded images using a personal computer
The image data recorded with your camcorder is compressed in the JPEG format. If you
use the application software, PictureGear 4.1Lite supplied with your camcorder, you
can see images recorded on the “Memory Stick” on a computer screen. Use the PC serial
cable supplied with your camcorder for this operation.
PC serial cable (supplied)
LANC /
DIGITAL I/O
: Signal flow
Serial port
92
Copying the image recorded on “Memory
Stick” to tapes
– DCR-TRV320 only
You can copy still images or titles recorded on “Memory Stick”s and record them to
Hi8 /Digital8 tapes.
Before operation
Insert a Hi8 /Digital8 tape for recording and a “Memory Stick” into your
camcorder.
(1) Set the POWER switch to VTR.
(2) Using the video control buttons, search a point where you want to record the
desired still image. Set the Hi8
/Digital8 tape to playback pause mode.
(3) Press z REC and the button on its right simultaneously on your camcorder.
The Hi8
/Digital8 tape is set to the recording pause mode.
(4) Press MEMORY PLAY to play back the still image you want to copy (P. 89).
(5) Press X to start recording and press X again to stop.
(6) If you have more to copy, repeat steps 4 and 5.
To stop copying in the middle
Press x.
5
4
1
PAUSE
3
2
PLAY
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
REC
93
“Memory Stick” operations
During copying
You cannot operate the following buttons:
MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY MIX, MEMORY +,
and MEMORY –.
Note on the index screen
You cannot record the index screen.
If you press the EDITSEARCH buttons during pause mode
Memory playback stops.
Image data modified with personal computers or shot with other equipment
You may not be able to copy them with your camcorder.
If you press the DISPLAY button in the standby or recording mode
You can see memory playback and the file name indicators in addition to the indicators
pertinent to Hi8 /Digital8 tapes, such as the time code indicator.
When copying
You cannot copy the image recorded on “Memory Stick” with titles to tapes.
Copying the image recorded on “Memory Stick” to tapes
94
You can enlarge still images recorded on a “Memory Stick”.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Press PB ZOOM on your camcorder while you are playing back. The still
image is enlarged, and R r appears on the LCD screen or in the viewfinder.
(3) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
R : The image moves downwards
r : The image moves upwards
T t becomes available.
(4) Turn SEL/PUSH EXEC dial to move the enlarged image, then press the dial.
T :The image moves rightward (Turn the dial downwards.)
t :The image moves leftward (Turn the dial upwards.)
To cancel memory PB ZOOM function
Press PB ZOOM.
Pictures processed by PB ZOOM function
Pictures processed by PB ZOOM function are not output through the DV IN/OUT
jack.
Enlarging still images recorded on
“Memory Stick”s – Memory PB ZOOM
3
PB ZOOM
[
EXEC
]
: T t
4
PB ZOOM
[
EXEC
]
: r R
1
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
2
PB ZOOM
95
“Memory Stick” operations
– DCR-TRV320 only
You can automatically play back images in sequence. This function is useful especially
when checking recorded images or during a presentation.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(2) Press MENU to make the menu display appear.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select SLIDE SHOW, then press the dial.
(5) Press MEMORY PLAY. Your camcorder plays back the images recorded on the
“Memory Stick” in sequence.
Playing back images in a continuous loop
– SLIDE SHOW
To stop the slide show
Press MENU.
To pause during a slide show
Press MEMORY PLAY.
To start the slide show from a particular image
Select the desired image using MEMORY +/– buttons before step 2.
2
5
3
4
1
1
PLAY
MENU
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
[
M PLAY
]
:
START
[
MENU
]
:
END
SL
I
DE SHOW
100–0021
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
READY
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
96
To view the recorded images on TV
Connect your camcorder to a TV with the A/V connecting cable supplied with your
camcorder before operation.
If you change the “Memory Stick” during operation
The slide show does not operate. If you change the “Memory Stick”, be sure to follow
the steps again from the beginning.
Playing back images in a continuous loop – SLIDE SHOW
97
“Memory Stick” operations
Preventing accidental erasure
– Image protection
– DCR-TRV320 only
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Play back the image you want to protect (P. 89).
(3) Press MENU to make the menu display appear.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PROTECT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU to erase the menu display. The - mark is displayed beside the
data file name of the protected image.
To cancel image protection
Select OFF in step 6, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all information on the “Memory Stick”, including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
3,7
MENU
11
4
5
6
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
OFF
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
OFF
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
98
– DCR-TRV320 only
You can delete images stored in a “Memory Stick”.
Before operation
Insert a “Memory Stick” into your camcorder.
Deleting selected images
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Play back the image you want to delete (P. 89).
(3) Press MEMORY DELETE. “DELETE?” appears on the LCD screen.
(4) Press MEMORY DELETE again. The selected image is deleted.
To cancel deleting an image
Press MEMORY – in step 4.
To delete an image displayed on the index screen
Press MEMORY +/– to move the B indicator to the desired image and follow steps 3
and 4.
Notes
To delete a protected image, first cancel image protection.
Once you delete an image, you cannot restore it. Check the images to delete carefully
before deleting them.
Deleting images
3,4
DELETE
11
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
DELETE
100-0021
[
DELETE
]
:
DEL
[
]
:
CANCEL
21 / 40
DELETE?
99
“Memory Stick” operations
Deleting all the images
You can delete all the unprotected images in the “Memory Stick”.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Press MENU to make the menu display appear.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select DELETE ALL, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial. OK changes
to EXECUTE.
(6) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
DELETING appears on the LCD screen. When all the unprotected images are
deleted, COMPLETE is displayed.
Deleting images
To cancel deleting all the images in the “Memory Stick”
Select RETURN in step 5, then press the SEL/PUSH EXEC.
2
3
4
6
5
MENU
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
11
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
READY
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
RETURN
OK
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
RETURN
OK
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
RETURN
EXECUTE
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
DELET
I
NG
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
COMPLETE
100
While DELETING appears
Do not turn the POWER switch or press any buttons.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot delete images.
Deleting images
101
“Memory Stick” operations
Writing a print mark – PRINT MARK
– DCR-TRV320 only
You can specify the recorded still image to print out. This function is useful for printing
out still images later.
Your camcorder conforms with the DPOF (Digital Print Order Format) standard for
specifying the still images to print out.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Play back the image you want to write a print mark (P. 89).
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PRINT MARK, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU to erase the menu display. The
mark is displayed beside the
data file name of the image with a print mark.
To cancel writing print marks
Select OFF in step 6, then press the SEL/PUSH EXEC dial.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot write print marks on still images.
3,7
VTR
OFF
MEMORY
CAMERA
(
CHARGE
)
11
MENU
4
5
6
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
OFF
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
21 / 40
MEMORY SET
CONT
I
NUOUS
QUAL
I
TY
FLD . / FRAME
PR
I
NT MARK
PROTECT
SL
I
DE SHOW
DELETE ALL
FORMAT
RETURN
[
MENU
]
:
END
ON
OFF
21 / 40
102
— Additional Information —
Digital8 system, recording and
playback
What is the “Digital8 system”?
This video system has been developed to enable digital recording to Hi8 /Digital8
video cassette .
Usable cassette tapes
We recommend using Hi8 /Digital8 video cassette*.
The recording time when you use your Digital8 system camcorder on Hi8 /
standard 8 tape is half the recording time when using the conventional Hi8 /
standard 8 system camcorder. (120 minutes of recording time becomes 60 minutes in
the SP mode.)
* If you use standard 8 tape, be sure to play back the tape on this camcorder. Mosaic
pattern noise may appear when you play back standard 8 tape on other VCRs
(including other DCR-TRV120/TRV320).
Note
Tapes recorded in the Digital8 system cannot be played back on Hi8 /standard 8
(analog) system machine.
is a trademark.
is a trademark.
is a trademark.
Playback system
The Digital8 system or Hi8 /standard 8 system is automatically detected
before the tape is played back.
During playback of tapes recorded in the Hi8 /standard 8 system, digital signals
are output as the image signals from the DV IN/OUT jack.
Display during automatic detection of system
The Digital8 system or Hi8 /standard 8 system is automatically detected, and
the playback system is automatically switched to. During switching of systems, the
screen turns blue, and the following displays appear. A hissing noise also sometimes
can be heard.
t / : During switching from Digital8 to Hi8 /standard 8
/ t : During switching from Hi8 /standard 8 to Digital8
Copyright signal
When you play back
Using any other video camera recorder, you cannot record on a tape that has recorded
copyright control signals for copyright protection of software which is played back on
your camcorder.
When you record
You cannot record software on your camcorder that contains copyright control signals
for copyright protection of software.
“COPY INHIBIT” appears on the LCD screen, in the viewfinder or on the TV screen if
you try to record such software. Your camcorder does not record copyright control
signals on the tape when it records.
103
Additional Information
When you playback a dual sound track tape
When you use tapes recorded in the Digital8 system
When you play back a Digital8 system tape which is dubbed from a dual sound track
tape recorded in the DV system, set HiFi SOUND to the desired mode in the menu
settings (p. 64).
Sound from speaker
HiFi Sound Playing back Playing back a dual
Mode a stereo tape sound track tape
STEREO Stereo Main sound and sub sound
1 Lch Main sound
2 Rch Sub sound
When you use a tape recorded in the Hi8/standard 8 system
When you play back a dual sound track tape recorded in an AFM HiFi stereo system,
set HiFi SOUND to the desired mode in the menu settings (p. 64).
Sound from speaker
HiFi Sound Playing back Playing back a dual
Mode a stereo tape sound track tape
STEREO Stereo Main sound and sub sound
1 Monaural Main sound
2 Unnatural Sound Sub sound
You cannot record dual sound programs on your camcorder.
Digital8 system, recording and playback
104
The DV jack on this unit is an i.LINK-compliant DV input/output jack. This section
describes the i.LINK standard and its features.
What is “i.LINK”?
i.LINK is a digital serial interface for handling digital video, digital audio and other
data in two directions between equipment having the i.LINK jack, and for controlling
other equipment.
i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible
applications are operations and data transactions with various digital AV equipment.
When two or more i.LINK-compatible equipment are connected to this unit in a daisy
chain, operations and data transactions are possible with not only the equipment that
this unit is connected to but also with other devices via the directly connected
equipment.
Note, however, that the method of operation sometimes varies according to the
characteristics and specifications of the equipment to be connected, and that operations
and data transactions are sometimes not possible on some connected equipment.
Note
Normally, only one piece of equipment can be connected to this unit by the i.LINK
cable (DV cable). When connecting this unit to i.LINK-compatible equipment having
two or more i.LINK jacks (DV jacks), refer to the instruction manual of the equipment to
be connected.
About the Name “i.LINK”
i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY,
and is a trademark approved by many corporations.
IEEE 1394 is an international standard standardized by the Institute of Electrical and
Electronic Engineers.
i.LINK Baud rate
i.LINK’s maximum baud rate varies according to the equipment. Three maximum baud
rates are defined:
S100 (approx. 100Mbps*)
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)
The baud rate is listed under “Specifications” in the instruction manual of each
equipment. It is also indicated near the i.LINK jack on some equipment.
The maximum baud rate of equipment on which it is not indicated such as this unit is
“S100”.
When units are connected to equipment having a different maximum baud rate, the
baud rate sometimes differs from the indicated baud rate.
* What is “Mbps”?
Mbps stands for megabits per second, or the amount of data that can be sent or received
in one second. For example, a baud rate of 100Mbps means that 100 megabits of data
can be sent in one second.
About i.LINK
105
Additional Information
About i.LINK
i.LINK Functions on this unit
For details on how to dub when this unit is connected to other video equipment having
DV jacks, see page 58.
This unit can also be connected to other i.LINK (DV) compatible equipment made by
SONY (e.g. VAIO series personal computer) other than video equipment.
Before connecting this unit to a personal computer, make sure that application software
supported by this unit is already installed on the personal computer.
For details on precautions when connecting this unit, also refer to the instruction
manuals for the equipment to be connected.
Required i.LINK Cable
Use the Sony i.LINK 4-pin-to-4-pin cable (during DV dubbing).
i.LINK and are trademarks.
106
When replacing the lithium battery, keep the battery pack or other power source
attached. Otherwise, you will need to reset the date, time and other items in the menu
settings hold in memory by the lithium battery.
Insert the battery with the positive (+) side facing out. When the battery becomes weak
or dead, the W indicator flashes on the LCD screen or in the viewfinder for about 5
seconds when you set the POWER switch to CAMERA or MEMORY (DCR-TRV320
only). In this case, replace the battery with a Sony CR2025 or Duracell DL-2025
lithium battery. Use of any other battery may present a risk of fire or explosion.
Discard used batteries according to the manufacturer’s instructions.
WARNING
The battery may explode if mistreated. Do not recharge, disassemble, nor dispose of it
in fire.
Lithium battery
Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately consult a doctor.
Wipe the battery with a dry cloth to ensure good contact.
Lithium battery installed at the factory
This battery may not last 1 year.
Changing the lithium battery in your
camcorder
(+) (--)-
107
Additional Information
Changing the lithium battery
(1) Open the LCD panel and open the lid of the lithium battery compartment.
(2) Push the lithium battery up once and pull it out from the holder.
(3) Install a Sony CR2025 or Duracell DL-2025 lithium battery with the positive (+)
side facing out.
(4) Close the lid.
Changing the lithium battery in your camcorder
1
1
2
3
4
108
If you run into any problem using your camcorder, use the following table to
troubleshoot the problem. If the problem persists, disconnect the power source and
contact your Sony dealer or local authorized Sony service facility. If “C:ss:ss
appears on the LCD screen, in the viewfinder or the display window, the self-diagnosis
display function has worked. See page 113.
In the recording mode
Symptom Cause and/or Corrective Actions
• The POWER switch is set to OFF (CHARGE), VTR or
MEMORY (DCR-TRV320 only).
c Set it to CAMERA. (p. 16)
• The tape has run out.
c Rewind the tape or insert a new one. (p. 15, 24)
• The write-protect tab is set to expose the red mark.
c Use a new tape or slide the tab. (p. 15)
• The tape is stuck to the drum (moisture condensation).
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 117)
• While being operated in the CAMERA mode, your
camcorder has been in the standby mode for more than 3
minutes.
c Set the POWER switch to OFF (CHARGE) and then to
CAMERA again. (p. 16)
• The viewfinder lens is not adjusted.
c Adjust the viewfinder lens. (p. 19)
• STEADYSHOT is set to OFF in the menu settings.
c Set it to ON. (p. 64)
• 16:9 WIDE is set to ON in the menu settings.
c Set it to OFF. (p. 64)
• FOCUS is set to MANUAL.
c Set it to AUTO. (p. 43)
• Shooting conditions are not suitable for autofocus.
c Set FOCUS to MANUAL to focus manually. (p. 43)
• The digital effect function is working.
c Cancel it. (p. 38)
• The LCD panel is open.
c Close the LCD panel. (p. 17)
• The tape is the standard 8 tape.
c Use Hi8 /Digital8 tapes. (p. 68)
Troubleshooting
START/STOP does not operate.
The power goes off.
The image on the viewfinder screen
is not clear.
The fader function does not work.
The autofocusing function does not
work.
The SteadyShot function does not
work.
The picture does not appear in the
viewfinder.
You cannot record in the LP mode.
109
Additional Information
Symptom Cause and/or Corrective Actions
• The contrast between the subject and background is too
high. This is not a malfunction.
• This is not a malfunction.
• Slow shutter, low lux or Super NightShot mode is
activated. This is not a malfunction.
• If 10 minutes elapse after you set the POWER switch to
CAMERA or DEMO MODE is set to ON in the menu
settings without a cassette inserted, your camcorder
automatically starts the demonstration.
c Insert a cassette and the demonstration stops.
You can also cancel DEMO MODE. (p. 69)
• NIGHTSHOT is set to ON.
c Set it to OFF. (p. 20)
• NIGHTSHOT is set to ON in a bright place.
c Set it to OFF, or use the NightShot function in a dark
place. (p. 20)
• Set STEADYSHOT to OFF in the menu settings. (P. 64)
In the playback mode
Symptom Cause and/or Corrective Actions
• The POWER switch is set to CAMERA, MEMORY (DCR-
TRV320 only) or OFF (CHARGE).
c Set it to VTR. (p. 24)
• The tape has run out.
c Rewind the tape. (p. 24)
• The video head may be dirty.
c Clean the heads using the Sony V8-25CLD cleaning
cassette (not supplied). (p. 118)
• The stereo tape is played back with HiFi SOUND set to 2
in the menu settings.
c Set it to STEREO. (p. 64)
• The volume is turned to minimum.
c Open the LCD panel and press VOLUME +. (p. 24)
• AUDIO MIX is set to ST2 side in the menu settings.
c Adjust AUDIO MIX. (p. 64)
• The tape has a blank portion in the recorded portion
(p. 53)
• PB MODE is set to / in the menu settings.
c Set it to AUTO. (p. 64)
• Set PB MODE to / in the menu settings. (p. 64)
(Continued on the following page)
Troubleshooting
An unknown picture is displayed on
the LCD screen or in the viewfinder.
A vertical band appears when you
shoot a very bright subject.
Some tiny white spots appear on the
LCD screen or in the viewfinder.
Picture appears too bright, and the
subject does not appear on the LCD
screen or in the viewfinder.
The picture is recorded in incorrect or
unnatural colors.
The tape does not move when a
video control button is pressed.
No sound or only a low sound is
heard when playing back a tape.
The date search does not work
correctly.
A vertical band appears when you
shoot a subject such as lights or a
candle flame against a dark
background.
There are horizontal lines on the
picture or the playback picture is
not clear or does not appear.
The picture which is recorded in the
Digital8 system is not played back.
The tape which is recorded in the Hi8
/standard 8 system is not played
back correctly.
A horizontal black band appears
when shooting a TV screen or
computer screen.
The playback button does not work.
110
In the recording and playback modes
Symptom Cause and/or Corrective Actions
The battery pack is not installed, or is dead or nearly dead.
c Install a charged battery pack. (p. 10, 11)
The AC power adaptor is not connected to a wall outlet.
c Connect the AC power adaptor to a wall outlet. (p. 14)
The tape was ejected after recording.
You have not recorded on the new cassette yet.
The tape has a blank portion in the beginning or middle.
The operating temperature is too low.
The battery pack is not fully charged.
c Charge the battery pack fully again. (p. 11)
The battery pack is completely dead, and cannot be
recharged.
c Replace with a new battery pack. (p. 10)
You have used the battery pack in an extremely hot or
cold environment for a long time.
The battery pack is completely dead, and cannot be
recharged.
c Replace with a new battery pack. (p. 10)
The battery is dead.
c Use a charged battery pack. (p. 10, 11)
Charge the battery pack fully again so that the indication
on the battery remaining indicator is correct.
The power source is disconnected.
c Connect it firmly. (p. 11, 14)
The battery is dead.
c Use a charged battery pack. (p. 10, 11)
Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 117)
Troubleshooting
The battery pack is quickly
discharged.
The battery remaining
indicator does not indicate
the correct time.
The power does not turn on.
The end search function does not
work.
The % and Z indicators flash and no
functions except for cassette ejection
work.
The cassette cannot be removed from
the holder.
The power goes off although the
battery remaining indicator indicates
that the battery pack has enough
power to operate.
The end search function does not
work correctly.
111
Additional Information
When operating using the “Memory Stick”
– DCR-TRV320 only
Symptom Cause and/or Corrective Actions
• The POWER switch is set to CAMERA or OFF (CHARGE).
c Set it to MEMORY. (p. 77)
• The “Memory Stick” is not inserted.
c Insert a “Memory Stick”. (p. 74)
• The “Memory Stick” has already been recorded to its full
capacity.
c Erase unnecessary images and record again. (p. 98, 77)
• The “Memory Stick” formatted incorrectly is inserted.
c Format the “Memory Stick” on your camcorder or use
another “Memory Stick”. (p. 67)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The image is protected.
c Cancel image protection. (p. 97)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The image to protect is not played back.
c Press MEMORY PLAY to play back the image. (p. 89)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
• The image to write a print mark is not played back.
c Press MEMORY PLAY to play back the image. (p. 89)
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 72)
The “Memory Stick” does not
function.
Recording does not function.
The image cannot be deleted.
You cannot format the “Memory
Stick”.
Deleting all the images cannot be
carried out.
You cannot write a print mark on
the still image.
The photo save function does not
work.
You cannot protect the image.
Troubleshooting
(Continued on the following page)
112
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 64)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the +
– polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 128)
• The batteries are dead.
c Insert new ones. (p. 128)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 64)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 117)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 14)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony
service facility.
The Remote Commander supplied
with your camcorder does not work.
The melody or beep sounds for 5
seconds.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
Troubleshooting
113
Additional Information
Five-digit display Cause and/or Corrective Actions
• You are using a battery pack that is not an
“InfoLITHIUM” battery pack.
c Use an “InfoLITHIUM” battery pack. (p. 13)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 117)
• The video heads are dirty.
c Clean the heads using the Sony V8-25CLD cleaning
cassette (not supplied). (p. 118)
• A malfunction other than the above that you can service
has occurred.
c Remove the cassette and insert it again, then operate
your camcorder.
c Disconnect the power cord of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorized Sony
service facility and inform them of the 5-digit code.
(example: E:61:10)
If you are unable to rectify the problem even if you try corrective actions a few times,
contact your Sony dealer or local authorized Sony service facility.
Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) on the LCD screen, in the
viewfinder, or in the display window.
If a 5-digit code is displayed, check the following
code chart. The last two digits (indicated by ss)
will differ depending on the state of your
camcorder.
C:21:ss
LCD screen, viewfinder or
display window
Self-diagnosis display
•C:ss:ss
You can service your camcorder
yourself.
•E:ss:ss
Contact your Sony dealer or local
authorized Sony facility.
E:61:ss
E:62:ss
C:31:ss
C:32:ss
C:04:ss
C:22:ss
Self-diagnosis display
114
C:21:00
100–0021
Warning indicators and messages
If indicators and messages appear on the LCD screen, in the viewfinder, or in the
display window, check the following:
See the page in parentheses “( )” for more information.
Warning indicators
Warning indicator as to tape
Slow flashing:
The tape is near the end.
No tape is inserted.* (p. 15)
The write-protect tab on the
cassette is out (red).* (p. 15)
Fast flashing:
The tape has run out.*
Self-diagnosis display (p. 113)
Moisture condensation has
occurred*
Fast flashing:
Eject the cassette, turn off your
camcorder, and leave it for
about 1 hour with the cassette
compartment open. (p. 117)
You need to eject the cassette*
Slow flashing:
The write-protect tab on the
cassette is out (red). (p. 15)
Fast flashing:
Moisture condensation has
occurred. (p. 117)
The tape has run out.
(p. 15, 24)
The self-diagnosis display
function is activated. (p. 113)
* You hear the melody or beep sound.
** This indicator appears in the viewfinder only.
The still image is protected* (DCR-TRV320 only)
Slow flashing:
The still image is protected. (p. 97)
The battery is dead or nearly
dead
Slow flashing:
The battery is nearly dead.
(p. 11)
Fast flashing:
The battery is dead.(p. 11)
Depending on conditions, the E
indicator may flash, even if there
are 5 to 10 minutes remaining.
The lithium battery is weak
or is not installed (p. 106)
Warning indicator as to
“Memory Stick”*
(DCR-TRV320 only)
Slow flashing:
No “Memory Stick” is inserted.
(p. 74)
Fast flashing:
“Memory Stick” is not readable
with your camcorder. (p. 72)
Warning indicator as to
“Memory stick”
Fast flashing:
“Memory Stick” is not
formatted correctly. (p. 67)
The “Memory Stick” data is
corrupted. (p. 72)
Warning indicator as to file
Slow flashing:
The file is corrupted (P. 72)
The file is unreadable (p. 72)
Warning indicator as to tape or
battery**
Slow flashing:
The battery is nearly dead.
The tape is near the end.
Fast flashing:
The battery is dead.
The tape has run out.*
115
Additional Information
Warning messages
CLOCK SET Reset the date and time. (p. 71)
FOR “InfoLITHIUM” Use an “InfoLITHIUM” battery pack. (p. 13)
BATTERY ONLY
8mm TAPE t SP REC Use Hi8 /Digital8 tapes when you record
Hi8 TAPE t LP/SP REC in the LP mode.* (p. 68)
Q Z TAPE END The tape has run out.*
Q NO TAPE Insert a cassette tape.*(P. 15)
CLEANING CASSETTE** The video heads are dirty. (p. 118)
COPY INHIBIT You tried to record a picture that has a copyright
control signal.* (p. 102)
FULL The “Memory Stick” is full.* (DCR-TRV320 only)
(p. 79)
- The write-protect tab on the “Memory Stick” is set to
LOCK* (DCR-TRV320 only). (p. 72)
NO FILE No still image is recorded on the “Memory Stick”*
(DCR-TRV320 only). (p. 89)
NO MEMORY STICK No “Memory Stick” is inserted.* (DCR-TRV320 only)
(p. 74)
MEMORY STICK ERROR The “Memory Stick” data is corrupted.*
(DCR-TRV320 only)
FORMAT ERROR Check the type of formatting. (DCR-TRV320 only)
- DIRECTORY ERROR The “Memory Stick” has more than one directry such
as 100 msdcf.* (DCR-TRV320 only)
* You hear the melody or beep sound.
** The x indicator and “ CLEANING CASSETTE” message appear one after another
on the LCD screen or in the viewfinder.
Warning indicators and messages
116
Using your camcorder abroad
You can use your camcorder in any country or area with the AC power adaptor
supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz.
When charging the battery pack, use a commercially available AC plug adaptor [a], if
necessary, depending on the design of the wall outlet [b].
Your camcorder is an NTSC system based camcorder. If you want to view the playback
picture on a TV, it must be an NTSC system based TV with VIDEO/AUDIO input jack.
The following shows TV color systems used overseas.
NTSC system
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,
Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela,
etc.
PAL system
Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Great
Britain, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal,
Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guyana, Hungary, Iran, Iraq, Monaco, Poland, Russia, Ukraine, etc.
Simple setting of clock by time difference
You can easily set the clock to the local time by setting a time difference. Select WORLD
TIME in the menu settings. See page 64 for more information.
Using your camcorder abroad
AC-L10A/L10B/L10C
[b][a]
117
Additional Information
Maintenance information and
precautions
Moisture condensation
If your camcorder is brought directly from a cold place to a warm place, moisture may
condense inside your camcorder, on the surface of the tape, or on the lens. In this
condition, the tape may stick to the head drum and be damaged or your camcorder may
not operate correctly. If there is moisture inside your camcorder, the beep sounds and
the % indicator flashes. When the Z indicator flashes at the same time, the cassette is
inserted in your camcorder. If moisture condenses on the lens, the indicator will not
appear.
If moisture condensation occurred
None of the functions except cassette ejection will work. Eject the cassette, turn off your
camcorder, and leave it for about 1 hour with the cassette compartment open. Your
camcorder can be used again if the % indicator does not appear when the power is
turned on again.
Note on moisture condensation
Moisture may condense when you bring your camcorder from a cold place into a warm
place (or vice versa) or when you use your camcorder in a hot place as follows:
You bring your camcorder from a ski slope into a place warmed up by a heating
device.
You bring your camcorder from an air-conditioned car or room into a hot place
outside.
You use your camcorder after a squall or a shower.
You use your camcorder in a high temperature and humidity place.
How to prevent moisture condensation
When you bring your camcorder from a cold place into a warm place, put your
camcorder in a plastic bag and tightly seal it. Remove the bag when the air temperature
inside the plastic bag has reached the surrounding temperature (after about 1 hour).
118
Maintenance information
Cleaning the LCD screen
If fingerprints or dust make the LCD screen dirty, we recommend using a LCD
Cleaning Kit (not supplied) to clean the LCD screen.
Cleaning the video head
To ensure normal recording and clear pictures, clean the video heads.
When you playback /record in the Digital8 system
The video head may be dirty when:
mosaic-pattern noise appears on the playback picture.
playback pictures do not move.
playback pictures are hardly visible.
playback pictures do not appear.
the x indicator and “ CLEANING CASSETTE” message appear one after another
on the LCD screen or in the viewfinder.
When you play back in the Hi8/Standard 8 (analog) system
The video head may be dirty when:
playback pictures contain noise.
playback pictures are hardly visible.
playback pictures do not appear.
If the above problem occurs, clean the video heads with the Sony V8-25CLD cleaning
cassette (not supplied). Check the picture and if the above problem persists, repeat
cleaning.
Maintenance information and precautions
or
or
119
Additional Information
Removing dust from inside the viewfinder
(1) 1Remove the screw with a screwdriver (not supplied). 2Then, while holding
the RELEASE knob up, 3turn the eyecup in a counterclockwise direction and
pull it out.
(2) Clean the surface with a commercially available blower for a still camera.
(3) Turn the eyecup in a clockwise direction, then replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
Maintenance information and precautions
120
Precautions
Camcorder operation
Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).
For DC or AC operation, use the accessories recommended in this operating
instructions.
If any solid object or liquid get inside the casing, unplug your camcorder and have it
checked by a Sony dealer before operating it any further.
Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Keep the POWER switch set to OFF (CHARGE) when you are not using your
camcorder.
Do not wrap your camcorder with a towel, for example, and operate it. Doing so
might cause heat to build up inside.
Keep your camcorder away from strong magnetic fields or mechanical vibration.
Noise may appear on the image.
Do not touch the LCD screen with your fingers or a sharp-pointed object.
If your camcorder is used in a cold place, a residual image may appear on the LCD
screen or in the viewfinder. This is not a malfunction.
While using your camcorder, the back of the LCD screen may heat up. This is not a
malfunction.
On handling tapes
Do not insert anything into the small holes on the rear of the cassette. These holes are
used to sense the type and thickness of the tape and if the recording tab is in or out.
Camcorder care
Remove the tape, and periodically turn on the power, operate the CAMERA and VTR
sections and play back a tape for about 3 minutes when your camcorder is not to be
used for a long time.
Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,
remove them with a soft cloth.
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of solvent which may damage the
finish.
Do not let sand get into your camcorder. When you use your camcorder on a sandy
beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause
your camcorder to malfunction, and sometimes this malfunction cannot be repaired.
Connection to your PC
When recording with i.LINK cable the image processed or edited by your PC, use a
new Hi8 /Digital8 tape.
When inputting the image recorded by Hi8/standard8 (analog) system into your PC,
dub the image into a Digital8 or DV tape first, and then input it into your PC.
When inputting the image recorded by Hi8/standard 8 system into Sony VAIO
The Program Capture function of DVgate motion doesn’t work. To use this function,
dub the image into a Digital8 or DV tape first, and then input it into your Sony VAIO.
Maintenance information and precautions
121
Additional Information
Maintenance information and precautions
AC power adaptor
Unplug the unit from the wall outlet when you are not using the unit for a long time.
To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.
Do not operate the unit with a damaged cord or if the unit has been dropped or
damaged.
Do not bend the power cord forcibly, or place a heavy object on it. This will damage
the cord and may cause fire or electrical shock.
Prevent metallic objects from coming into contact with the metal parts of the
connecting section. If this happens, a short may occur and the unit may be damaged.
Always keep metal contacts clean.
Do not disassemble the unit.
Do not apply mechanical shock or drop the unit.
While the unit is in use, particularly during charging, keep it away from AM receivers
and video equipment. AM receivers and video equipment disturb AM reception and
video operation.
The unit becomes warm during use. This is not a malfunction.
Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
Battery pack
Use only the specified charger or video equipment with the charging function.
To prevent accident from a short circuit, do not allow metal objects to come into
contact with the battery terminals.
Keep the battery pack away from fire.
Never expose the battery pack to temperatures above 140°F (60°C), such as in a car
parked in the sun or under direct sunlight.
Keep the battery pack dry.
Do not expose the battery pack to any mechanical shock.
Do not disassemble nor modify the battery pack.
Attach the battery pack to the video equipment securely.
Charging while some capacity remains does not affect the original battery capacity.
Notes on dry batteries
To avoid possible damage from battery leakage or corrosion, observe the following:
Be sure to insert the batteries with the + – polarities matched to the + – marks.
Dry batteries are not rechargeable.
Do not use a combination of new and old batteries.
Do not use different types of batteries.
Current flows from batteries when you are not using them for a long time.
Do not use leaking batteries.
If batteries are leaking
Wipe off the liquid in the battery compartment carefully before replacing the batteries.
If you touch the liquid, wash it off with water.
If the liquid get into your eyes, wash your eyes with a lot of water and then consult a
doctor.
If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.
122
DV input/output
4-pin connector
Headphone jack
Stereo minijack (ø 3.5 mm)
LANC
control jack (DCR-
TRV120)
LANC
/DIGITAL I/O jack
(DCR-TRV320)
Stereo mini-minijack (ø 2.5 mm)
Transfer rate:
Max 115.2 Kbps
RS-232C based
MIC jack
Stereo minijack (ø 3.5 mm)
LCD screen
Picture
2.5 type
2 × 1 1/2 in. (50.3 × 37.4 mm)
Total dot number
61,600 (280 × 220)
General
Power requirements
7.2 V (battery pack)
8.4 V (AC power adaptor)
Average power consumption
(when using the battery pack)
During camera recording using
LCD
DCR-TRV120:
3.5 W
DCR-TRV320:
3.7 W
Viewfinder
DCR-TRV120:
3.1 W
DCR-TRV320:
3.3 W
Operating temperature
32 °F to 104 °F (0 °C to 40 °C)
Storage temperature
–4 °F to +140 °F (–20 °C to +60 °C)
Dimensions (Approx.)
4 1/4 × 4 1/4 × 9 1/4 in.
(107 × 106 × 233 mm) (w/h/d)
Mass (approx.)
DCR-TRV120:
2 lb (930 g)
DCR-TRV320:
2 lb 1 oz (950 g)
excluding the battery pack, lithium
battery, cassette and shoulder
strap
2 lb 6 oz (1.1 kg)
including the battery pack
NP-F330, lithium battery CR2025,
120min. Hi8 cassette, and shoulder
strap
Supplied accessories
See page 5.
Video camera
recorder
System
Video recording system
2 rotary heads
Helical scaning system
Audio recording system
Rotary heads, PCM system
Quantization: 12 bits (Fs 32 kHz,
stereo 1, stereo 2), 16 bits
(Fs 48 kHz, stereo)
Video signal
NTSC color, EIA standards
Recommended cassette
Hi8/Digital8 video cassette
Recording/playback time (using
120 min. Hi8 video cassette)
SP mode: 1 hour
LP mode: 1 hour and 30 minuites
Fastforward/rewind time (using
120 min. Hi8 video cassette)
Approx. 5 min.
Viewfinder
Electric Viewfinder (monochrome)
Image device
1/4 type CCD (Charge Coupled
Device)
Approx. 460,000 pixels
(Effective: Approx. 290,000 pixels)
Lens
Combined power zoom lens
Filter diameter 1 1/2 in. (37 mm)
25× (Optical), 450×
(Digital)
Focal length
5/32 - 3 3/4 in. (3.7 - 92.5 mm)
When converted to a 35 mm still
camera
1 15/16 - 47 1/4 in. (48 - 1200 mm)
Color temperature
Auto
Minimum illumination
1 lux (F 1.6)
0 lux (in the NightShot mode)*
* Objects unable to be seen due to
the dark can be shot with
infrared lighting.
Input/output
connectors
S video input/output
4-pin mini DIN
Luminance signal: 1 Vp-p,
75 ohms, unbalanced
Chrominance signal: 0.286 Vp-p,
75 ohms, unbalanced
Audio/Video input/output
AV MINIJACK, 1 Vp-p, 75 ohms,
unbalanced, sync negative
327 mV, (at output impedance
more than 47 kilohms)
Output impedance with less than
2.2 kilohms/Stereo minijack
(ø 3.5 mm)
Input impedance more than 47
kilohms
Specifications
AC power adaptor
Power requirements
100 - 240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in the
operating mode
Operating temperature
32 °F to 104 °F (0 °C to 40 °C)
Storage temperature
–4 °F to +140 °F (–20 °C to +60 °C)
Dimensions (approx.)
5 × 1 9/16 × 2 1/2 in.
(125 × 39 × 62 mm) (w/h/d)
excluding projecting parts
Mass (approx.)
9.8 oz (280 g)
excluding power cord
Battery pack
Output voltage
DC 7.2 V
Capacity
5.0 Wh
Dimensions (approx.)
1 9/16 × 13/16 × 2 7/8 in.
(38 × 21 × 71 mm) (w/h/d)
Mass (approx.)
3.4 oz (95 g)
Type
Lithium ion
“Memory Stick”
(DCR-TRV320 only)
Memory
Flash memory
4MB: MSA-4A
Operating voltage
2.7 - 3.6 V
Power consumption
Approx. 45mA in the operating
mode
Approx. 130µA in the standby
mode
Dimensions (approx.)
2 × 1/8 × 7/8 in.
(50 × 2.8 × 21.5 mm) (w/h/d)
Mass (approx.)
0.14 oz (4 g)
Design and specifications are
subject to change without notice.
123
Quick Reference
— Quick Reference —
Identifying the parts and controls
1 LCD BRIGHT buttons (p. 17)
2 OPEN button (p. 16)
3 VOLUME buttons (p. 24)
4 BATT RELEASE lever (p. 10)
5 POWER switch (p. 16)
6 START/STOP button (p. 16)
7 Hooks for shoulder strap (p. 125)
8 DC IN jack (p. 11)
This mark indicates that this product is a genuine accessory for Sony
video products.
When purchasing Sony video products, Sony recommends that you
purchase accessories with this “GENUINE VIDEO ACCESSORIES”
mark.
Camcorder
3
2
5
6
7
8
1
4
124
9 Video control buttons (p. 24, 26)
x STOP (stop)
m REW (rewind)
N PLAY (playback)
M FF (fastforward)
X PAUSE (pause)
z REC (recording)
The control buttons light up when you
set the POWER switch to VTR.
0 EDITSEARCH buttons (p. 23)
qa S. LASER LINK button (p. 28)
qs Focus ring (p. 43)
qd Microphone
qf Camera recording lamp (p. 16)
qg Infrared rays emitter (p. 20, 28)
qh SUPER NIGHTSHOT button (p. 21)
qj NIGHTSHOT switch (p. 20)
qk Display window (p. 129)
ql FOCUS switch (p. 43)
w; Tripod receptacle (base)
Make sure that the length of the tripod
screw is less than 9/32 inch (6.5 mm).
Otherwise, you cannot attach the tripod
securely and the screw may damage
your camcorder.
wa Remote sensor
Identifying the parts and controls
What is SUPER LASER LINK?
The super laser link system sends and receives pictures and sound between video
equipment having the super laser link mark by using infrared rays.
9
qg
qf
qd
qs
0
qa
qj
qk
w;
qh
ql
wa
125
Quick Reference
Identifying the parts and controls
Attaching the shoulder strap
Attach the shoulder strap supplied with your camcorder to the hooks for the shoulder
strap.
ws Eyecup
wd Viewfinder
wf MEMORY PLAY button* (p. 89)
wg MEMORY – button* (p. 83, 89)
wh LCD screen (p. 17)
wj Speaker
wk (self-timer) button* (p. 22, 81)
wl Viewfinder lens adjustment lever
(p. 19)
e; Eyecup RELEASE knob (p. 119)
ea MEMORY INDEX button* (p. 90)
es MEMORY DELETE button* (p. 98)
ed FADER button (p. 33)
ef BACK LIGHT button (p. 20)
eg PROGRAM AE button (p. 41)
eh EXPOSURE button (p. 42)
ej MEMORY MIX button* (p. 83)
ek MEMORY + button* (p. 83, 89)
* DCR-TRV320 only
wk
wh
ws
wd
wf
wg
wj
ek
ej
eh
eg
ef
ed
wl
e;
ea
es
126
Identifying the parts and controls
el Intelligent accessory shoe
r; DATA CODE button (p. 25)
ra DISPLAY button (p. 25)
rs Lithium battery compartment (p. 107)
rd PB ZOOM button (p. 51, 94)
rf TITLE button (p. 44)
rg Power Zoom lever (p. 18)
Notes on the intelligent accessory shoe
The intelligent accessory shoe supplies power to optional accessories such as a video
light or microphone.
The intelligent accessory shoe is linked to the POWER switch, allowing you to turn the
power supplied by the shoe on and off. Refer to the operating instructions of the
accessory for further information.
The intelligent accessory shoe has a safety device for fixing the installed accessory
securely. To connect an accessory, press down and push it to the end, and then tighten
the screw.
To remove an accessory, loosen the screw, and then press down and pull out the
accessory.
rh
rg
ts
r;
el
ra
rs
rd
rf
rl
t;
ta
rk
rj
rh “Memory Stick” lamp*
This lamp lights up while “Memory
Stick” is in the “Memory Stick”
compartment.
rj PHOTO button (p. 29, 77)
rk DIGITAL EFFECT button (p. 38, 50)
rl END SEARCH button (p. 23)
t; PICTURE EFFECT button (p. 36, 49)
ta MENU button (p. 32, 64)
ts SEL/PUSH EXEC dial (p. 32, 64)
* DCR-TRV320 only
127
Quick Reference
Fastening the grip strap
Fasten the grip strap firmly.
Identifying the parts and controls
td EJECT button (p. 15)
tf Access lamp* (p. 74)
tg “Memory Stick” compartment* (p. 74)
th LOCK knob (p. 16)
tj Cassette compartment (p. 15)
tk Grip strap
tl LANC
control jack (DCR-TRV120)
LANC
/DIGITAL I/O jack
(DCR-TRV320)
LANC stands for Local Application
Control Bus System. The LANC control
jack is used for controlling the tape
transport of video equipment and other
peripherals connected to the video
equipment. This jack has the same
function as the jack indicated as
CONTROL L or REMOTE.
y; S VIDEO ID-2 jack (p. 27)
ya i (headphones) jack
ys AUDIO/VIDEO ID-2 jack (p. 27, 31, 57)
yd MIC (PLUG IN POWER) jack
Connect an external microphone
(not supplied). This jack also accepts
a “plug-in-power” microphone.
yf
DV IN/OUT jack (p. 58, 86)
The
DV IN/OUT jack is i.LINK
compatible.
* DCR-TRV320 only
th
tk
tl
tf
tg
y;
ya
ys
yf
yd
td
tj
128
Remote Commander
The buttons that have the same name on the Remote Commander as on your camcorder
function identically to the buttons on your camcorder.
Identifying the parts and controls
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and – polarities on the batteries to
the + – marks inside the battery compartment.
Notes on the Remote Commander
Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not function properly.
Your camcorder works in the Commander mode VTR 2. Commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid
remote control misoperation. If you use another Sony VCR in the Commander mode
VTR 2, we recommend changing the Commander mode or covering the sensor of the
VCR with black paper.
1 PHOTO button (p. 30)
2 DISPLAY button (p. 25)
3 SEARCH MODE button (p. 53, 55)
4 ./> buttons (p. 53, 55)
5 Tape transport buttons (p. 26)
6 DATA CODE button (p. 25)
7 ZERO SET MEMORY button (p. 48, 52)
8 Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the camcorder.
9 START/STOP button (p. 16)
0 Power zoom button (p. 18)
1
2
3
5
4
6
7
8
9
0
129
Quick Reference
Operation indicators
LCD screen and Viewfinder Display window
1 Recording mode indicator (p. 19)
/Mirror mode indicator (p. 17)
2 Format indicator (p. 102)
, or indicator appears.
3 Remaining battery time indicator
(p. 11, 19)
4 Zoom indicator (p. 18)/Exposure
indicator (p. 42)
5 Fader indicator (p. 34)/Digital effect
indicator (p. 38, 50)
6 Wide mode indicator (p. 32)/FRAME
indicator* (p. 77)
7 Picture effect indicator (p. 36, 49)
8 LCD bright indicator (p. 17)/Volume
indicator (p. 24)/Data code indicator
(p. 25)
9 PROGRAM AE indicator (p. 41)
0 Backlight indicator (p. 20)
qa SteadyShot off indicator (p. 65)
qs Manual focusing indicator (p. 43)
qd Self-timer indicator* (p. 22, 81)
qf STBY/REC indicator (p. 19)/Video
control mode (p. 26)
qg Tape counter indicator (p. 19, 48, 52)/
Time code indicator (p. 19)/Self-
diagnosis display indicator (p. 113)/
Tape photo recording indicator (p. 29)
qh Remaining tape indicator (p. 19)
qj ZERO SET MEMORY indicator
(p. 48, 52)
qk Search mode indicator
(p. 23, 53, 55, 56)
ql NIGHTSHOT indicator (p. 20)
w; A/V t DV indicator (p. 66)/
DV IN indicator (p. 61)
wa Audio mode indicator (p. 68)
ws Warning indicators (p. 114)
wd Recording lamp (p. 16)
This indicator appears in the viewfinder.
wf Video flash ready indicator
This indicator appears when you use the
video flash light (not supplied).
wg Tape counter indicator (p. 19, 48, 52)/
Time code indicator (p. 19)Self-
diagnosis display indicator (p. 113)/
Remaining battery time indicator
(p. 11, 19)
wh FULL charge indicator (p. 11)
* DCR-TRV320 only
Identifying the parts and controls
40
min
REC
0:00:00
M.FADER
16:9WIDE
SEPIA
16BIT
TW
DATE
01
SEARCH
ZERO SET
MEMORY
A/VtDV
SP
2
4
5
6
7
8
9
0
qa
qs
qd
3
1
qf
qh
ql
wa
w;
ws
wd
wf
qk
qj
qg
wg
ws
2
3
qd
wh
1
130
Quick Function Guide
Functions to adjust exposure (in the recording mode)
In a dark place NIGHTSHOT (p. 20)
In insufficient light Low lux mode (p. 40)
In dark environments such as sunset, fireworks, Sunset & moon mode (p. 40)
or general night views
Shooting backlit subjects BACK LIGHT (p. 20)
In spotlight, such as at the theater Spotlight mode (p. 40)
In strong light or reflected light, such as Beach & ski mode (p. 40)
at a beach in midsummer or on a ski slope
Functions to give images more impact
(in the recording mode)
Smooth transition between scenes FADER (p. 33)
Taking a still image Tape photo recording (p. 29)/
Memory photo recording* (P. 77)
Digital processing of images PICTURE EFFECT (p. 36)/
DIGITAL EFFECT (p. 37)
Creating a soft background for subjects Soft portrait mode (p. 40)
Superimposing a title TITLE (p. 44)
Functions to give a natural appearance to your recordings
(in the recording mode)
Preventing deterioration of picture quality D ZOOM [MENU] (p. 64)
in digital zoom
Focusing manually Manual focus (p. 43)
Shooting distant subjects Landscape mode (p. 40)
•Recording fast-moving subjects Sports lesson mode (p. 40)
Functions to use in editing (in the recording mode)
Watching the picture on a wide-screen TV Wide mode (p. 32)
Viewing images using a personal computer “Memory Stick”* (p. 72)
Functions to use after recording (in the playback mode)
•Digital processing of recorded images PICTURE EFFECT (p. 49)/
DIGITAL EFFECT (p. 50)
Displaying the date/time or recording data Data code (p. 25)
when you recorded
Quickly locating a desired scene Zero set memory (p. 48, 52)
Searching for scenes recorded on tape in Photo search (p. 55)
the photo mode
Scanning scenes recorded on tape in Photo scan (p. 56)
the photo mode
Playing back on monaural sound or sub sound HiFi SOUND [MENU] (p. 64)
Playing back the picture on a TV without SUPER LASER LINK (p. 28)
connecting a cord
* DCR-TRV320 only
Index
A, B
AC power adaptor .................. 11
Adjusting viewfinder ............. 19
AFM HiFi Sound................... 103
AUDIO MIX ............................ 66
AUDIO MODE ........................ 68
A/V connecting cable
.................................... 27, 31, 57
BACK LIGHT .......................... 20
Battery pack ............................. 10
BEEP ......................................... 70
BOUNCE .................................. 33
C, D
Camera chroma key ............... 82
Charging battery ..................... 11
Clock set ................................... 71
Connection
(viewing on TV) ................... 27
(dubbing a tape).................. 57
Connection to your PC .......... 59
Data code ................................. 25
Date search .............................. 53
DEMO....................................... 69
DIGITAL EFFECT ............ 37, 50
Digital 8 system .................... 102
DIGITAL I/O ........................ 127
DISPLAY .................................. 25
DOT .......................................... 33
Dual sound track tape .......... 103
Dubbing a tape ........................ 57
DV connecting cable............... 58
E
EDITSEARCH ......................... 23
END SEARCH................... 23, 26
Exposure .................................. 42
External microphone
(not supplied) ..................... 127
F, G, H
FADER ..................................... 33
Fade in/out.............................. 33
FLASH MOTION.................... 37
FOCUS...................................... 43
Format ...................................... 67
Full charge ............................... 11
Grip strap ............................... 127
Headphone jack .................... 127
Heads...................................... 118
HiFi SOUND ........................... 66
I, J, K, L
i.LINK ....................... 58, 104, 127
Image protection ..................... 97
Image quality mode ............... 75
Index screen ............................. 90
“InfoLITHIUM” battery ........ 13
Infrared rays emitter ........ 20, 28
JPEG .......................................... 72
LANC ................................. 127
LCD screen .............................. 17
LUMINANCEKEY ................. 37
M, N
Main sound .............................. 66
Manual focus ........................... 43
Memory chroma key .............. 82
Memory luminance key ......... 82
MEMORY MIX ........................ 82
Memory overlap ..................... 82
Memory photo recording ...... 77
“Memory Stick” ...................... 72
Menu settings .......................... 64
Mirror mode ............................ 17
Moisture condensation ........ 117
Monaural.................................. 27
MONOTONE .......................... 33
Mosaic fader ............................ 33
NIGHTSHOT .......................... 20
Normal charge ........................ 11
NTSC system ......................... 116
O, P, Q
OLD MOVIE ............................ 37
Operation indicators ............ 129
OVERLAP ................................ 33
PB ZOOM ................................ 51
PC serial cable ......................... 91
Photo scan ................................ 56
Photo search ............................ 55
PICTURE EFFECT ............ 36, 49
Picture search .......................... 26
Playback pause........................ 26
Power sources
(battery pack) ....................... 10
(house current) ..................... 14
(car battery) .......................... 14
Print mark .............................. 101
PROGRAM AE....................... 40
R
Recording time ........................ 12
Rec Review .............................. 23
Remaining battery time
indicator ................................ 19
Remaining tape indicator ...... 19
Remote Commander ............ 128
Remote control jack (LANC)
.............................................. 127
Remote sensor ....................... 124
S
Self-diagnosis display .......... 113
Self-timer.................................. 22
SEL/PUSH EXEC dial ......... 126
Shoulder strap ....................... 125
Signal convert function .......... 59
Skip scan .................................. 26
Slide show................................ 95
Slow playback ......................... 26
SLOW SHUTTER .................... 37
STEADYSHOT ........................ 65
Stereo tape ............................. 103
STILL ........................................ 37
Sub sound ................................ 66
SUPER LASER LINK ..... 28, 124
SUPER NIGHTSHOT ............. 21
S video jack ........................ 31, 57
T, U, V
Tape counter ............................ 19
Tape photo recording............. 29
Telephote ................................. 18
Time code................................. 19
Title ........................................... 44
TRAIL ....................................... 37
Transition ................................. 17
TV color systems ................... 116
W, X, Y, Z
Warning indicators ............... 114
Wide-angle .............................. 18
Wide mode .............................. 32
WIPE ......................................... 33
WORLD TIME......................... 70
Write-protect tab ..................... 15
Zero set memory ............... 48, 52
Zoom ........................................ 18
131
Sony Corporation Printed in Japan
15

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sony-DCR-TRV120E

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony DCR-TRV120E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony DCR-TRV120E in de taal/talen: Engels als bijlage per email.

De handleiding is 3,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sony DCR-TRV120E

Sony DCR-TRV120E Gebruiksaanwijzing - Nederlands - 268 pagina's

Sony DCR-TRV120E Gebruiksaanwijzing - Nederlands - 168 pagina's

Sony DCR-TRV120E Gebruiksaanwijzing - English - 268 pagina's

Sony DCR-TRV120E Gebruiksaanwijzing - Italiano - 168 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info