62199
10
Verklein
Vergroot
Pagina terug
1/139
Pagina verder
3-285-367-11(1)
© 2008 Sony Corporation
http://www.sony.net/
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)-
free vegetable oil based ink.
Printed in China
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
GB
Digital Video Camera Recorder
Operating Guide
DCR-DVD110E/DVD115E/
DVD310E/DVD410E/DVD610E/
DVD710E/DVD810E
Enjoying with Your
Camcorder
11
Getting Started 19
Recording/Playback 34
Editing 50
Utilizing Media 66
Customizing Your
Camcorder
78
Performing with Your
Computer
97
Troubleshooting 101
Additional
Information
114
Quick
Reference
129
2
Read this before operating your camcorder
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
To reduce fire or shock hazard, do
not expose the unit to rain or
moisture.
Do not expose the batteries to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with this product
will increase eye hazard. Use of controls or
adjustments or performance of procedures other
than those specified herein may result in
hazardous radiation exposure.
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
A moulded plug complying with BS1363 is fitted
to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied
one and approved by ASTA or BSI to BS1362
(i.e., marked with or mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the
plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony
service station.
ATTENTION
The electromagnetic fields at the specific
frequencies may influence the picture and sound
of this unit.
This product has been tested and found compliant
with the limits set out in the EMC Directive for
using connection cables shorter than 3 meters (9.8
feet).
Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
communication cable (USB, etc.) again.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and other
European countries with
separate collection
systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product. The recycling of
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
WARNING
FOR CUSTOMERS IN THE
UNITED KINGDOM
FOR CUSTOMERS IN EUROPE
3
Applicable Accessory: Remote Commander
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E)
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the battery provided
with this product shall not be treated as household
waste. By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused by
inappropriate waste handling of the battery. The
recycling of the materials will help to conserve
natural resources. In case of products that for
safety, performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should be
replaced by qualified service staff only. To ensure
that the battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment. For all other batteries,
please view the section on how to remove the
battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
If you have any questions about this product, you
may call:
Sony Customer Information Center
1-800-222-SONY (7669).
The number below is for the FCC related matters
only.
Regulatory Information
For customers in the U.S.A.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD610E
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD710E
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Continued ,
4
Read this before operating your camcorder (Continued)
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Battery pack
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Your camcorder is supplied with two
kinds of operations guides.
Operating Guide” (This manual)
PMB Guide” for using your camcorder
with a computer connected (stored on the
supplied CD-ROM) (p. 97)
Types of the disc you can use in your
camcorder
You can use the following discs only.
8cm DVD-RW
8cm DVD+RW
8cm DVD-R
8cm DVD+R DL
Use the discs with marks listed below. See
page 12 for details.
For reliability and durability of recording/
playback, we recommend that you use Sony
discs or discs with a
*(for VIDEO
CAMERA) mark for your camcorder.
* Depending on the place you purchase, the disc
has mark.
b Note
Using a disc other than the above may cause the
unsatisfactory recording/playback or you may
not be able to remove the disc from your
camcorder.
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-DVD810E
Responsible Party:Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Notes on use
5
Types of “Memory Stick” you can use
in your camcorder
For recording movies, it is recommended
that you use a “Memory Stick PRO Duo”
of 512 MB or larger marked with:
(“Memory Stick
PRO Duo”)*
(“Memory Stick
PRO-HG Duo”)
* You can use a “Memory Stick PRO Duo”
marked either with “Mark2” or without.
See page 33 for the recordable time of a
“Memory Stick PRO Duo.”
“Memory Stick PRO Duo”/“Memory Stick
PRO-HG Duo
(This size can be used with your
camcorder.)
“Memory Stick”
(You cannot use it in your camcorder.)
“Memory Stick PRO Duo” and “Memory
Stick PRO-HG Duo” are both referred to
as “Memory Stick PRO Duo” in this
manual.
You cannot use any type of memory card
other than those mentioned above.
“Memory Stick PRO Duo” can be used
only with “Memory Stick PRO”
compatible equipment.
Do not attach a label or the like on a
“Memory Stick PRO Duo” or a Memory
Stick Duo adaptor.
When using a “Memory Stick PRO Duo”
with “Memory Stick” compatible
equipment, be sure to insert the “Memory
Stick PRO Duo” into the Memory Stick
Duo adaptor.
Using the camcorder
Do not hold the camcorder by the
following parts.
The camcorder is not dustproofed,
dripproofed or waterproofed. See “About
handling of your camcorder” (p. 121).
To prevent media from being broken or
recorded images from being lost, do not
do the following when either of the
(Movie)/ (Still) lamps (p. 24) or the
ACCESS/access lamps (p. 30, 32) are on:
to remove the battery pack or AC
Adaptor from the camcorder
to apply mechanical shock or vibration to
the camcorder
to remove the “Memory Stick PRO Duo”
from the camcorder
When connecting your camcorder to
another device with a cable, be sure to
insert the connector plug in the correct
way. Pushing the plug forcibly into the
terminal will damage the terminal and
may result in a malfunction of your
camcorder.
About menu items, LCD panel,
viewfinder, and lens
A menu item that is grayed out is not
available under the current recording or
playback conditions.
The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
Viewfinder LCD screen
Battery
Continued ,
6
Read this before operating your camcorder (Continued)
the pixels are effective. However, there
may be some tiny black points and/or
bright points (white, red, blue, or green in
color) that appear constantly on the LCD
screen and the viewfinder. These points
are normal results of the manufacturing
process and do not affect the recording in
any way.
Exposing the LCD screen, the viewfinder,
or the lens to direct sunlight for long
periods of time may cause malfunctions.
• Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
On recording
Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
DCR-DVD110E/DVD115E/DVD310E/
DVD610E/DVD710E
Use a DVD-RW/DVD+RW for trial
recording.
DCR-DVD410E/DVD810E
Make trial recording on the internal memory.
• Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder,
recording media, etc.
TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
If you repeat recording/deleting images
for a long time, fragmentation of data
occurs on the internal memory (DCR-
DVD410E/DVD810E) or a “Memory
Stick PRO Duo.” Images cannot be saved
or recorded. In such a case, save your
images on another type of media first
(p. 55, 62), and then format the media
(p. 72).
About language setting
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 25).
About disposal/transfer (DCR-
DVD410E/DVD810E)
Even if you format the internal memory on
your camcorder (p. 72), data may not be
completely deleted from the internal
memory. When you give or sell your
camcorder to somebody, it is recommended
that you perform [ EMPTY] (p. 77) to
prevent the recovery of your data. In
addition to the above, when you dispose of
the camcorder, it is recommended that you
destroy the actual body of the camcorder.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Black point
White, red, blue or
green point
7
About this manual
The LCD screens and the viewfinder
images and indicators shown in this
manual were taken with a digital still
camera, and may look different from what
you actually see.
Discs in this manual refers to 8cm DVD
discs.
In this manual, the internal memory
(DCR-DVD410E/DVD810E), a disc and
a “Memory Stick PRO Duo” are called the
media.
Unless otherwise specifically indicated,
illustrations in this manual are based on
DCR-DVD810E.
Design and specifications of media and
other accessories are subject to change
without notice.
About the marks used in this manual
The operations available depend on the
media used. The following marks are
used to indicate the type of media you
can use for a particular operation.
Internal Memory
Disc
“Memory Stick PRO Duo”
8
Table of Contents
Read this before operating your
camcorder .................................... 2
Table of Contents ........................... 8
Subject examples and solutions ... 10
Enjoy using various “Media”
according to your needs ............. 11
Media for your camcorder ............ 12
Using your camcorder .................. 14
HOME” and “ OPTION”
- Taking advantage of two types of
menus ......................................... 16
Step 1: Checking supplied items .. 19
Step 2: Charging the battery pack 20
Step 3: Turning the power on, and
setting the date and time ............ 24
Changing the language setting ... 25
Step 4: Making adjustments before
recording .................................... 26
Step 5: Selecting media ............... 28
Step 6: Inserting a disc or a “Memory
Stick PRO Duo” .......................... 30
Recording and playing back with ease
(Easy Handycam operation) ....... 34
Recording ..................................... 38
Zooming ...................................... 40
Recording sound with more
presence (5.1ch surround
recording) (DCR-DVD115E/
DVD310E/DVD410E/DVD710E/
DVD810E) ................................. 40
Starting to record quickly (QUICK
ON) ........................................... 41
Recording in dark places (NightShot
plus) .......................................... 41
Adjusting the exposure for backlit
subjects .................................... 41
Recording in mirror mode ........... 41
Playback ....................................... 43
Searching for scenes with pinpoint
accuracy (Film Roll Index) ........ 45
Searching for desired scenes by a
face (Face Index) ...................... 45
Searching for desired images by
date (Date Index) ...................... 46
Using PB zoom ............................ 46
Playing back a series of still images
(Slide show) .............................. 47
Playing the images on a TV ......... 48
(OTHERS) category ................ 50
Deleting images ............................ 51
Capturing a still image from a movie
(DCR-DVD410E/DVD610E/
DVD710E/DVD810E) ................. 53
Dubbing/copying images to media
within your camcorder ................ 55
Dividing movies ............................ 58
Creating the Playlist ..................... 59
Dubbing movies to VCR or DVD/HDD
recorders .................................... 62
Printing still images (PictBridge
compliant printer) ........................ 64
(MANAGE MEDIA) category .. 66
Making the disc compatible with
playback on other devices
(Finalizing) .................................. 67
Playing a disc on other devices .... 70
Checking media information .........71
Formatting media ......................... 72
Enjoying with Your Camcorder
Getting Started
Recording/Playback
Editing
Utilizing Media
9
Recording additional movies after
finalizing .....................................74
Finding the right disc (DISC SELECT
GUIDE) .......................................75
Repairing the image database file
.....................................................76
Preventing data on the internal
memory from being recovered
(DCR-DVD410E/DVD810E) .......77
What you can do with the
(SETTINGS) category of the
HOME MENU ........................78
Using the HOME MENU .............. 78
List of the (SETTINGS) category
items ......................................... 79
MOVIE SETTINGS .......................80
(Items for recording movies)
PHOTO SETTINGS ......................82
(Items for recording still images)
VIEW IMAGES SET .....................84
(Items to customize the display)
SOUND/DISP SET .......................86
(Items to adjust sound and the screen)
OUTPUT SETTINGS ....................87
(Items for when connecting other devices)
CLOCK/ LANG ..........................88
(Items to set clock and language)
GENERAL SET ............................88
(Other setup items)
Activating functions using the
OPTION MENU ......................90
Using the OPTION MENU ........... 90
Recording items on the OPTION
MENU ....................................... 91
Viewing items on the OPTION
MENU ....................................... 91
Functions set in the OPTION
MENU .........................................92
What you can do with Windows
computer .....................................97
Troubleshooting ..........................101
Warning indicators and messages
...................................................110
Using your camcorder abroad ....114
File/folder structure on the internal
memory (DCR-DVD410E/
DVD810E) and a “Memory Stick
PRO Duo .................................116
Maintenance and precautions .....117
About the disc ........................... 117
About the “Memory Stick” ......... 118
About the “InfoLITHIUM” battery
pack ........................................ 119
About handling of your camcorder
................................................. 121
Specifications ..............................125
Identifying parts and controls ......129
Indicators displayed during recording/
playback ....................................133
Glossary ......................................135
Index ...........................................136
Customizing Your Camcorder
Performing with Your Computer
Troubleshooting
Additional Information
Quick Reference
10
Subject examples and solutions
Shooting
Flowers in close-up
B PORTRAIT...................................... 94
B FOCUS............................................ 92
B TELE MACRO ................................. 92
Focusing on the
dog on the left side
of the screen
B FOCUS............................................ 92
B SPOT FOCUS.................................. 92
Getting a good shot
of a ski slope or
beach
B BACK LIGHT................................... 41
B BEACH............................................ 94
B SNOW ............................................ 94
Checking your golf
swing
B SPORTS ......................................... 94
A child on the stage
under a spot light
B SPOTLIGHT.....................................94
Fireworks with all
its splendor
B FIREWORKS....................................93
B FOCUS ............................................92
A sleeping child
under dim light
B NightShot plus ................................41
B COLOR SLOW SHTR.......................95
11
Enjoying with Your Camcorder
Enjoying with Your Camcorder
Enjoy using various “Media” according to your
needs
You can select desired media for recording/playback/editing from the internal memory (DCR-
DVD410E/DVD810E), a disc or a “Memory Stick PRO Duo” (p. 28). To set the media for
movies or still images, you can select either [MOVIE MEDIA SET] or [PHOTO MEDIA
SET] (DCR-DVD410E/DVD810E) according to your needs.
Using the [MOVIE DUB] function on the camcorder, you can dub movies recorded on the
internal memory (DCR-DVD410E/DVD810E) or a “Memory Stick PRO Duo” to a disc
without connecting another device (p. 55).
b Notes
You may not be able to dub movie contents depending on the type of your camcorder. For details on the
compatibility of types, see page 55.
Selecting media
Dubbing from one type of media to another
12
Media for your camcorder
With your camcorder, you can record images on either the internal memory (DCR-DVD410E/
DVD810E), an 8cm DVD-RW, DVD+RW, DVD-R or DVD+R DL disc, or a “Memory Stick
PRO Duo.” See page 5 for the types of “Memory Stick” you can use in your camcorder.
When you use a DVD-RW, you can choose the recording format from VIDEO mode or VR
mode.
In this manual, VIDEO mode is indicated as and VR mode as .
VIDEO mode and VR mode Glossary (p. 135)
Recording format for DVD-RW
A recording format that is compatible with most DVD devices, especially after
finalizing.
In VIDEO mode, only the most recent movie can be deleted.
A recording format that enables editing with your camcorder (deleting and rearranging
the order of images).
A finalized disc can be played back in DVD devices that support VR mode.
Refer to the instruction manual of your DVD device to see whether it supports the VR
mode of DVD-RW.
Disc features
Figures in parentheses ( ) indicate reference pages.
Disc types and symbols
DVD-RW DVD+RW DVD-R DVD+R DL
Symbols used in this manual
Both 16:9 (wide) and 4:3 movie can be recorded
on the same disc
(30)
zz zz
Deleting the most recent movie (52) zzz ––
Deleting or editing movie on your camcorder (51)
z ––
Using a disc repeatedly by formatting, even if the
disc becomes full*
(72)
zzz ––
Finalizing required to play on other devices (67)
zz
*1
** zz
Making longer recordings on a side of a disc ––––z
* Formatting deletes all images and returns the recording media to its original empty state (p. 72). Even
when using a new disc, format it with your camcorder (p. 30).
** Finalizing is required to play the disc in a DVD drive on a computer. A DVD+RW that is not finalized
may cause the computer to malfunction.
13
Enjoying with Your Camcorder
Figures in the table are the approximate recording time in minutes using the internal memory
(DCR-DVD410E/DVD810E) and on one side of a disc.
The recordable time on the acceptable media varies depending on media type and the [REC
MODE] (p. 80) setting.
Figures in ( ) are the minimum recording time.
* DCR-DVD410E/DVD810E
z Tips
Figures such as 9M and 6M in the table show the average bit rate. M stands for Mbps.
You can check the recordable time with [MEDIA INFO] (p. 71).
When you use a double-sided disc, you can record images on both sides (p. 117).
See page 33 for the recordable time on a “Memory Stick PRO Duo.
Recording time of movies
Media type
9M (HQ) (high quality)
115 (100) 20 (18) 35 (32)
6M (SP) (standard quality)
170 (100) 30 (18) 55 (32)
3M (LP) (long play)
325 (215) 60 (44) 110 (80)
*
Your camcorder uses the VBR (Variable Bit Rate) format to automatically adjust image quality to suit the
recording scene. This technology causes fluctuations in the recording time of media. Movies containing
quickly moving and complex images are recorded at a higher bit rate, and this reduces the overall recording
time.
14
Using your camcorder
1Selecting media (p. 28)
You can select media separately for movies and still images.
In the case of recording on a disc, select the disc that best suits your needs.
Do you want to delete or edit images on your
camcorder?
Yes No
For long recording
Yes No
Do you want to delete images and reuse
the disc?
* Select the recording format and format the disc on your camcorder (p. 30).
zTips
You can select the disc from [DISC SELECT GUIDE] (p. 75).
2Recording images (p. 38)
3Editing/Saving images
The available functions depend on the selected media.
x Dubbing/copying images to another type of media within your camcorder (p. 55)
x Dubbing movies to other devices (p. 62)
x Editing on a computer (p. 97)
Using the supplied application software “Picture Motion Browser,” you can import
images to a computer, and save them on a disc.
15
Enjoying with Your Camcorder
4Viewing on other devices
x Viewing images on a TV (p. 48)
You can view the images recorded and edited on your camcorder on the connected TV.
x Playing the disc on other devices (p. 70)
To play a disc recorded on your camcorder on other devices, you need to finalize the
disc first.
bNotes
The less the recording volume of the disc is, the more it takes time to finalize the disc.
The features of a finalized disc depend on disc type.
Recordings cannot be added
even if there is free space left.
Like commercially sold DVD,
this disc can be played back in
most DVD devices after
finalizing.
The disc can be played back in
a device compatible with the
DVD-RW VR mode.
The disc can be played back without finalizing.
But finalizing is required in some cases.
For details, see page 67.
Unfinalizing allows you to add
movies (p. 74).
Movies can be added without
unfinalizing.
Playback compatibility
Playback compatibility with all DVD devices is not guaranteed. Refer to the instruction manual
supplied with your DVD device or consult your dealer.
16
HOME” and “ OPTION”
- Taking advantage of two types of menus
B Categories and items of the HOME MENU
(CAMERA) category
(VIEW IMAGES) category
(OTHERS) category
(MANAGE MEDIA) category
(SETTINGS) category
*
1
To customize your camcorder (p. 78).
HOME MENU” - the starting point for operations with your
camcorder
(HELP)
Displays a description of the item (p. 17)
Category
Items Page
MOVIE*
1
39
PHOTO*
1
39
Items Page
VISUAL INDEX*
1
43
INDEX*
1
45
INDEX*
1
45
PLAYLIST 59
Items Page
DELETE*
2
51
PHOTO CAPTURE*
3
53
MOVIE DUB*
3
55
PHOTO COPY*
3
56
EDIT 58
PLAYLIST EDIT 59
PRINT 64
USB CONNECT 97
Items Page
MOVIE MEDIA SET*
1
28
PHOTO MEDIA SET*
1
*
3
28
FINALIZE*
1
67
MEDIA INFO 71
MEDIA FORMAT*
1
72
UNFINALIZE 74
DISC SELECT GUIDE 75
REPAIR IMG.DB F. 76
*
1
You can also set these items during Easy
Handycam operation (p. 34). For items
available in the (SETTINGS) category,
see page 79.
*
2
The item is available during Easy Handycam
operation (p. 34) when you select [INT.
MEMORY] (DCR-DVD410E/DVD810E) or
[MEMORY STICK] on [MOVIE MEDIA
SET] (p. 28).
*
3
You may not be able to use this item depending
on your camcorder model.
17
Enjoying with Your Camcorder
1 While pressing the green button,
turn the POWER switch in the
direction of the arrow to turn on
your camcorder.
2 Press (HOME) A (or B).
3 Touch the desired category.
Example: (OTHERS) category
4 Touch the desired item.
Example: [EDIT]
5 Follow the guide on the screen for
further operation.
To hide the HOME MENU screen
Touch .
When you want to know something
about the function of each item on the
HOME MENU - HELP
1 Press (HOME).
The HOME MENU appears.
2 Touch (HELP).
The bottom of (HELP) turns orange.
Using the HOME MENU
(HOME) B
(HOME) A
Continued ,
18
3 Touch the item you want to know
the content.
When you touch an item, its explanation
appears on the screen.
To apply the option, touch [YES],
otherwise, touch [NO].
To deactivate the HELP
Touch (HELP) again in step 2.
Just a touch on the screen during shooting
or playback displays the functions available
at that moment. You will find it easy to
make various settings. See page 90 for
further details.
Using the OPTION MENU
(OPTION)
HOME” and “ OPTION” - Taking advantage of two types of menus
(Continued)
19
Getting Started
Getting Started
Step 1: Checking supplied items
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p. 20)
Power cord (mains lead) (1) (p. 20)
A/V connecting cable (1) (p. 48, 62)
USB cable (1) (p. 64)
Wireless Remote Commander (DCR-
DVD310E/DVD410E/DVD710E/
DVD810E) (1) (p. 132)
A button-type lithium battery is already installed.
Rechargeable battery pack NP-FH40 (1)
(p. 20)
CD-ROM “Handycam Application
Software” (1) (p. 97)
Picture Motion Browser (Software)
–PMB Guide
Operating Guide (This manual) (1)
20
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 119) after
attaching it to your camcorder.
b Notes
Your camcorder operates only with
“InfoLITHIUM” battery pack (H series).
1 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
2 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
3 Connect the AC Adaptor to the
DC IN jack of your camcorder.
Open the jack cover, and connect the
DC plug of the AC Adaptor.
Match the v mark on the DC plug with
the v mark on your camcorder.
4 Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
b Notes
Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
POWER switch
DC IN jack
DC plug
AC Adaptor
Power cord (mains lead)
To the wall outlet
(wall socket)
Jack cover
CHG (charge) lamp
Battery
21
Getting Started
To remove the battery pack
1 Turn the POWER switch to OFF
(CHG).
2 Slide the BATT (battery) release lever
(1) and remove the battery pack (2).
b Notes
When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/
(Still) lamp (p. 24)/ACCESS lamp (p. 30)/
access lamp (p. 32) are turned off.
When you store the battery pack, fully discharge
the battery before storing it for an extended
period (p. 119).
To use a power source from a wall
outlet (wall socket)
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
When recording on the internal
memory (DCR-DVD410E/DVD810E)
or a “Memory Stick PRO Duo”
DCR-DVD110E/DVD115E/DVD610E
BATT (battery)
release lever
Battery pack Charging time
NP-FH40
(supplied)
125
NP-FH50 135
NP-FH70 170
NP-FH100 390
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
110 50
120 55
NP-FH50 130 60
140 65
NP-FH70 280 130
300 140
NP-FH100 625 300
680 325
Remaining battery (approx.)
Recording capacity (approx.)
Continued ,
22
Step 2: Charging the battery pack (Continued)
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
When recording on a disc
DCR-DVD110E/DVD115E/DVD610E
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
See page 28 for selecting the media.
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When recording with the viewfinder
while the LCD panel is closed.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
When playing the internal memory
(DCR-DVD410E/DVD810E) or a
“Memory Stick PRO Duo”
DCR-DVD110E/DVD115E/DVD610E
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
100 45
115 55
NP-FH50 115 55
135 60
NP-FH70 245 115
290 135
NP-FH100 555 265
650 310
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
95 40
100 45
NP-FH50 110 45
120 50
NP-FH70 235 105
255 110
NP-FH100 535 240
580 260
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
85 35
100 45
NP-FH50 100 45
115 50
NP-FH70 215 95
245 110
NP-FH100 485 215
555 245
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
150 170
NP-FH50 170 195
NP-FH70 370 415
NP-FH100 830 925
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
140 170
NP-FH50 165 195
NP-FH70 350 415
NP-FH100 785 925
Battery pack
Continuous
recording
time
Typical
recording
time*
23
Getting Started
When playing a disc
DCR-DVD110E/DVD115E/DVD610E
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
* When the LCD backlight is on.
b Notes
See page 28 for selecting the media.
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/ (Still) lamp (p. 24)/
ACCESS lamp (p. 30)/access lamp (p. 32).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 21) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (for Battery Info
only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
When attaching an optional video light, it is
recommended that you use an NP-FH70/NP-
FH100 battery pack (DCR-DVD310E/
DVD410E/DVD710E/DVD810E).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Even if your camcorder is turned off, AC power
source (mains) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
120 135
NP-FH50 140 155
NP-FH70 300 330
NP-FH100 680 745
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
115 135
NP-FH50 135 155
NP-FH70 290 330
NP-FH100 650 745
24
Step 3: Turning the power on, and setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
Go to step 3 when you turn on your
camcorder for the first time.
2 Touch (HOME) t
(SETTINGS) t [CLOCK/
LANG] t [CLOCK SET].
The [CLOCK SET] screen appears.
3 Select the desired geographical
area with / , then touch
[NEXT].
4 Set [SUMMERTIME], then touch
[NEXT].
5 Set [Y] (year) with / .
6 Select [M] with / , then set
the month with / .
7 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
8 Make sure that the clock is
correctly set, then touch .
The clock starts.
You can set any year up to the year
2037.
To turn off the power
Turn the POWER switch to OFF (CHG).
b Notes
If you do not use your camcorder for about 3
months
, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 124).
POWER switch
Touch the button on the LCD screen.
25
Getting Started
It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to save
battery power ([A.SHUT OFF], p. 89).
z Tips
The date and time does not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 84).
See page 115 for information concerning
“World time difference.”
If the buttons on the touch panel do not work
correctly, adjust the touch panel
([CALIBRATION], p. 122).
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME)
t (SETTINGS)
t [CLOCK/ LANG] t
[ LANGUAGE SET], then select the
desired language.
Changing the language setting
26
Step 4: Making adjustments before recording
Slide the LENS COVER switch to OPEN.
After recording, set the LENS COVER
switch to CLOSE to close the lens cover.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
To turn off the LCD backlight to make
the battery last longer
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E)
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold DISP/
BATT INFO for a few seconds until
disappears.
b Notes
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
z Tips
If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
Touch (HOME) t (SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 86), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display
y no display) each time you press DISP
BATT/INFO.
You can view images using the viewfinder
to avoid wearing down the battery, or when
the image seen on the LCD screen is poor.
Pull out and look into the viewfinder.
Adjust the viewfinder to your eyesight.
z Tips
You can adjust the brightness of the viewfinder
backlight by touching (HOME)
Opening the lens cover
Adjusting the LCD panel
190 degrees to the
camcorder
2180 degrees
(max.)
290 degrees
(max.)
DISP/BATT INFO
Adjusting the viewfinder
Viewfinder lens
adjustment lever
Move it until the
image becomes clear.
Viewfinder
27
Getting Started
t (SETTINGS) t [SOUND/DISP SET]
t [VF B.LIGHT] (p. 86).
Adjust and fasten the grip belt as illustrated,
and hold your camcorder properly.
Fastening the grip belt
28
Step 5: Selecting media
You can set the media to be used for movies and still images separately.
For movies, you can select the internal memory*, a disc, or a “Memory Stick PRO Duo.” For
still images, you can select the internal memory*, or a “Memory Stick PRO Duo.”
DCR-DVD110E/DVD115E/DVD310E/DVD610E/DVD710E
In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory
Stick PRO Duo” only.
DCR-DVD410E/DVD810E
In the default setting, both movies and still images are recorded on the internal memory.
b Notes
You can record, play back, or edit images on the selected media. When you record, play back, or edit
images on other media, select media again.
1 Touch (HOME) t
(MANAGE MEDIA) t [MOVIE
MEDIA SET].
The movie media setting screen
appears.
2 Touch the desired media.
3 Touch [YES].
4 When [Completed.] appears,
touch .
The movie media is changed.
Internal memory
Disc
“Memory Stick PRO Duo”
Movie Still image
*
* DCR-DVD410E/DVD810E
Selecting media for movies
29
Getting Started
1 Touch (HOME) t
(MANAGE MEDIA) t [PHOTO
MEDIA SET].
The still image media setting screen
appears.
2 Touch the desired media.
b Notes
You cannot select a disc for the still image
media.
3 Touch [YES].
4 When [Completed.] appears,
touch .
The still image media is changed.
To confirm the selected media
1 Slide the POWER switch to turn on the
lamp of the mode ( (Movie)/
(Still)) that you want to check the
media.
2 Confirm the media icon displayed at the
upper right corner of the screen.
* DCR-DVD410E/DVD810E
Selecting media for still images
(DCR-DVD410E/DVD810E)
Internal memory*
Disc (The icon differs
depending on the disc type
(p. 12).)
“Memory Stick PRO Duo”
Media icon
30
Step 6: Inserting a disc or a “Memory Stick PRO
Duo”
When you select [INT. MEMORY] in
“Step 5,” this “Step 6” operation is
unnecessary (DCR-DVD410E/DVD810E).
When you select [DISC] in “Step 5,” a new
8 cm DVD-RW, DVD+RW, DVD-R, or
DVD+R DL is required (p. 12).
b Notes
Remove dust or fingerprints from the disc
beforehand, using a soft cloth (p. 118).
1 Check that the power of your
camcorder is on.
2 Slide the disc cover OPEN switch
in the direction of the arrow
(OPEN l).
[PREPARING TO OPEN] appears on
the screen. The disc cover slightly opens
automatically.
3 Set the disc with the recording
side facing your camcorder, then
press the center of the disc until it
clicks.
4 Close the disc cover.
[DISC ACCESS] appears on the screen.
It may take some time for the camcorder
to recognize the disc.
x DVD-RW/DVD+RW
A screen appears to ask whether you
will use [DISC SELECT GUIDE].
Using [DISC SELECT GUIDE] lets you
format the disc by following the
guidance on the screen. If you do not
want to use it, proceed to step 5.
x DVD-R/DVD+R DL
You can start recording immediately
after [DISC ACCESS] disappears from
the screen. You do not need to proceed
to steps after step 5.
Inserting a disc
Disc cover OPEN
switch
Pickup lens
When the disc cover opens slightly, open it
further.
ACCESS lamp (Disc)
Set the disc with the label side facing out when
using a single-sided disc.
31
Getting Started
5 Touch the option that is right for
you on the screen.
x DVD-RW
Select the recording format, [VIDEO]
or [VR] (p. 12), then touch
.
x DVD+RW
Select the aspect ratio of the movie,
[16:9 WIDE] or [4:3], then touch
.
6 Touch [YES].
7 When [Completed.] is displayed,
touch .
When the formatting is completed, you
can start recording on the disc.
z Tips
When you use a DVD-RW while the Easy
Handycam operation (p. 34) is set, the
recording format is fixed to VIDEO
mode.
To remove the disc
1 Perform steps 1 and 2 to open the disc
cover.
2 Press the disc holder in the center of the
disc compartment, and remove the disc by
holding the edge.
b Notes
Be careful not to obstruct the operation with
your hand or other objects, when opening or
closing the disc cover. Move the grip belt to the
bottom of the camcorder, then open or close the
disc cover.
If you catch the grip belt when closing the disc
cover, it may cause your camcorder to
malfunction.
Do not touch the disc with the recording side or
pickup lens (p. 123).
When using a double-sided disc, take care not to
smudge the surface with fingerprints.
If you close the disc cover with the disc set
incorrectly, it may cause your camcorder to
malfunction.
Do not disconnect the power sources while
formatting a disc.
Do not apply shock or vibration to your
camcorder since your camcorder is reading/
writing on the disc:
while the ACCESS lamp is on
while the ACCESS lamp is flashing
while [DISC ACCESS] or [PREPARING TO
OPEN] is displayed on the LCD screen
It may take some time to remove the disc
depending on the recorded contents.
It may take about 10 minutes to remove a disc if
the disc has scratches or is dirty with
fingerprints, etc. In that case, the disc might be
damaged.
z Tips
You can insert or remove the disc when a power
source is connected to your camcorder even
when your camcorder is turned off. However,
the disc recognition process (step 4) does not
start.
To delete all of the previously recorded images
from a DVD-RW/DVD+RW, then to use it
again to record new images, see “Formatting
media” (p. 72).
You can check the right disc using [DISC
SELECT GUIDE] on the HOME MENU
(p. 75).
Continued ,
32
Step 6: Inserting a disc or a “Memory Stick PRO Duo” (Continued)
This operation is necessary only when you
select [MEMORY STICK] in “Step 5.”
See page 5 on the “Memory Stick” you can
use with your camcorder.
z Tips
If you record only still images on the “Memory
Stick PRO Duo,” operations after step 3 are
unnecessary.
1 Open the LCD panel.
2 Insert the “Memory Stick PRO
Duo.”
1 Open the Memory Stick Duo cover in
the direction of the arrow.
2 Insert the “Memory Stick PRO Duo”
into the Memory Stick Duo slot in the
right direction until it clicks.
3 Close the Memory Stick Duo cover.
3 If you select [MEMORY STICK] in
“Step 5” for movie recording,
slide the POWER switch
repeatedly until the (Movie)
lamp lights up.
If the POWER switch is set to OFF
(CHG), turn it on while pressing the
green button.
The [Create a new Image Database
File.] screen appears on the screen when
you insert a new “Memory Stick PRO
Duo.”
4 Touch [YES].
Inserting a “Memory Stick PRO
Duo”
Access lamp
Face the b mark towards the
LCD screen.
33
Getting Started
To remove the “Memory Stick PRO
Duo”
Open the LCD panel and Memory Stick
Duo cover. Lightly push the “Memory Stick
PRO Duo” in once, then slide it out of the
slot.
b Notes
To prevent media from being broken or
recorded images from being lost, do not do the
following when the access lamp ( p. 32) is on:
to remove the battery pack or AC Adaptor
from the camcorder
to apply mechanical shock or vibration to the
camcorder
to remove the “Memory Stick PRO Duo”
from the camcorder
Do not open the Memory Stick Duo cover
during recording.
Inserting a “Memory Stick PRO Duo” forcibly
in the wrong direction may cause a malfunction
to the “Memory Stick PRO Duo,” Memory
Stick Duo slot, or image data.
If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] is displayed in step 4, format the
“Memory Stick PRO Duo” (p. 72). All recorded
data on the “Memory Stick PRO Duo” will be
deleted when you format.
Do not pinch and remove the “Memory Stick
PRO Duo” forcibly. It may cause a malfunction.
Recording time of movies on a
“Memory Stick PRO Duo”
Figures in the table are approximate
recording time in minutes of “Memory
Stick PRO Duo.”
Figures in ( ) are minimum recording time.
b Notes
Numbers in the table are of when using a
“Memory Stick PRO Duo” made by Sony
Corporation. The recordable time varies
depending on the recording conditions, the type
of “Memory Stick,” or the [REC MODE] setting
(p. 80).
When the recordable time is less than 5 minutes,
appears.
z Tips
See page 83 for the recordable numbers of still
images.
Recording
mode
9M (HQ)
(high
quality)
6M (SP)
(standard
quality)
3M (LP)
(long play)
512MB
6 (5) 9 (5) 15 (10)
1GB
10 (10) 20 (10) 35 (25)
2GB
25 (25) 40 (25) 80 (50)
4GB
55 (50) 80 (50) 160 (105)
8GB
115 (100) 170 (100) 325 (215)
34
Recording/Playback
Recording and playing back with ease (Easy
Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform
recording or playing back operation without detailed settings. It also makes the screen font
size larger for easy viewing. The images are recorded on the selected media (p. 28).
R
1 Turn the POWER switch
G until the (Movie)
lamp lights up.
2 Press EASY A.
3 Press START/STOP H (or E) to
start recording*.
To stop recording, press START/STOP
again.
1 Turn the POWER switch
G until the (Still)
lamp lights up.
2 Press EASY A.
3
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).
If the POWER switch
is set to OFF (CHG),
turn it while pressing
the green button.
Movies
appears on the
screen.
,
[STBY] t [REC]
Still Images
appears on the
screen.
,
Flashing t Lights up
* Movies are recorded in the [SP] recording mode.
35
Recording/Playback
1 Turn the POWER switch G to turn on your camcorder.
2 Press (VIEW IMAGES) I (or D).
The VISUAL INDEX screen appears on the screen. (It may take some time to display the
thumbnails.)
3 Start playback.
Movies:
Touch the tab and the movie to be played back.
Playing back recorded movies/still images
Previous 6 images
Next 6 images
Searches for images by
recording date (p. 46).*
Appears with the image on
each of the tab that was lastly
played back/recorded (B for
the still image recorded on
“Memory Stick PRO Duo”).
Returns to the recording
screen.
* When you select [DISC] on [MOVIE MEDIA SET] (p. 28), a disc type appears. You cannot search
for movies by recording date.
Film Roll Index (p. 45)
Face Index (p. 45)
Displays movies.
Displays still images.
Beginning of the scene/
previous scene
Toggles Play or Pause as
you touch.
Next scene
Stop (goes to the
VISUAL INDEX screen.)
Reverse/Forward
Returns to the VISUAL
INDEX screen.
Recording date/time*
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 84).
Continued ,
36
Recording and playing back with ease (Easy Handycam operation)
(Continued)
zTips
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL
INDEX screen.
You can slow down the playback speed by touching / during pause.
You can adjust the volume by touching (HOME) t (SETTINGS) t [SOUND
SETTINGS] t [VOLUME], then with / .
You can change the movie media with [MOVIE MEDIA SET] (p. 28).
Still images:
Touch the tab and the still image to be played back.
zTips
You can switch the still image media with [PHOTO MEDIA SET] (DCR-DVD410E/DVD810E)
(p. 28).
Side show (p. 47)
Previous/Next
Goes to the VISUAL
INDEX screen.
Returns to the VISUAL
INDEX screen.
Recording date/time*
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 84).
37
Recording/Playback
To cancel Easy Handycam operation
Press EASY A again. disappears
from the screen.
Menu settings during Easy Handycam
operation
Touch (HOME) C (or B) to display
the menu items available for setup changes
(p.16, 78).
b Notes
Most of the menu items automatically return to
the default settings. The settings of some menu
items are fixed. For details, see page 79.
DVD-RW is formatted with VIDEO mode (p.
12).
You cannot use the (OPTION) menu.
Cancel Easy Handycam operation if you want to
add effects to images or change settings.
Invalid buttons during Easy Handycam
operation
You cannot use some buttons/functions
during Easy Handycam operation since
they are automatically set (
p. 79). If you set
an invalid operation, [Invalid during Easy
Handycam operation] appears.
To view movies on a disc on other
devices (Finalize)
To view movies stored on a disc on other
devices or a computer, you need to
“finalize” the disc. For details on finalizing
operation, see page 67.
b Notes
For DVD-R, DVD+R DL, you cannot reuse the
disc or record additional movies onto the disc
once you finalize the disc even if the disc has
free space.
You cannot record additional movies on a
finalized disc during Easy Handycam operation
(p. 74).
38
Recording
The images are recorded on the media selected on the media setting (p. 28).
DCR-DVD110E/DVD115E/DVD310E/DVD610E/DVD710E
In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory
Stick PRO Duo” only.
DCR-DVD410E/DVD810E
In the default setting, both movies and still images are recorded on the internal memory.
b Notes
If the ACCESS/access lamps (p. 30, 32) are lit or flashing after recording is finished, it means data is still
being written onto the media. Do not apply shock or vibration to your camcorder, and do not remove the
battery pack or the AC Adaptor.
In the case that [INT. MEMORY] (DCR-DVD410E/DVD810E) or [MEMORY STICK] is selected on
[MOVIE MEDIA SET] (p. 28), when a movie file exceeds 2 GB, the next movie file is created
automatically.
z Tips
See page 5 for the “Memory Stick PRO Duo” you can use in your camcorder.
POWER switch A
If the POWER switch is
set to OFF (CHG), turn it
while pressing the green
button.
PHOTO F
(HOME) D
START/STOP B
Open the lens cover
(p. 26).
(HOME) E
START/STOP C
(Movie) lamp
(Still) lamp
39
Recording/Playback
You can check the free media space for movies by touching (HOME) t (MANAGE MEDIA)
t [MEDIA INFO] (p. 71).
1 Turn the POWER switch A until
the (Movie) lamp lights up.
2 Press START/STOP B (or C).
To stop recording, press START/STOP
again.
1 Turn the POWER switch A until
the (Still) lamp lights up.
2
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).
appears next to or . When
disappears, the image has been
recorded.
b Notes
You cannot record still images on a disc.
z Tips
See page 13 for the recordable time of movies, and page 83 for the number of recordable still images.
appears when [ INDEX SET] is set to [ON] (the default setting) during movie recording (p. 82).
You can switch recording between movies and still images by touching (HOME) D (or E) t
(CAMERA) t [MOVIE] or [PHOTO].
You can create still images from recorded movies (p. 53).
Movies
[STBY] t [REC]
Still Images
Flashing t Lights up
Continued ,
40
Recording (Continued)
You can zoom in up to the magnifications
shown in the following table.
You can adjust the magnification with the
power zoom lever or the zoom button on
the LCD frame.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
b Notes
[STEADYSHOT] may not reduce image
blurring as desired when the power zoom lever
is set to the T (Telephoto) side.
Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the lever
may also be recorded.
You cannot change the zoom speed with the
zoom buttons on the LCD frame.
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
Using [DIGITAL ZOOM] (p. 81), you can
zoom in further than the magnification shown in
the table when recording movies.
Sound picked up by the built-in microphone
is converted to 5.1ch surround sound and
recorded.
Enjoy realistic sound when playing the
movies on devices that support 5.1ch
surround sound.
Dolby Digital 5.1 Creator, 5.1ch surround sound
Glossary (p. 135)
b Notes
5.1ch sound is converted to 2ch when played back
on your camcorder.
z Tips
You can select the recording sound, [5.1ch
SURROUND] or [2ch STEREO] ([AUDIO
MODE], p. 80).
Zooming
(optical zoom)
DCR-DVD110E/DVD115E/
DVD610E
40 ×
DCR-DVD310E/DVD410E/
DVD710E/DVD810E
25 ×
Close view: (Telephoto)
Wider range of view:
(Wide angle)
Recording sound with more
presence (5.1ch surround
recording) (DCR-DVD115E/
DVD310E/DVD410E/DVD710E/
DVD810E)
Built-in microphone
41
Recording/Playback
If you press QUICK ON instead of turning
off the POWER switch, the power
consumption will be reduced (sleep mode).
In sleep mode, the QUICK ON lamp
flashes. If you press QUICK ON again
when you want to start next recording, your
camcorder will be ready for recording after
about 1 second.
b Notes
While the camcorder is in sleep mode, the
power consumption will be about half that used
during recording. You can save the battery
power.
If you do not operate your camcorder and leave
it in sleep mode for a while, your camcorder
automatically turns off. With [QUICK ON
STBY], you can set the time after which the
camcorder turns off in sleep mode (p. 89).
If you press QUICK ON during recording, your
camcorder stops recording and becomes sleep
mode.
To record in dark places, set the
NIGHTSHOT PLUS switch to ON to
display .
b Notes
The NightShot plus and Super NightShot plus
functions use infrared light. Therefore, do not
cover the infrared port with your fingers or other
objects.
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
Do not use the NightShot plus and Super
NightShot plus functions in bright places. This
may cause a malfunction.
z Tips
To record an image brighter, use Super
NightShot plus function (p. 95). To record a
movie more faithfully to the original colors, use
Color Slow Shutter function (p. 95).
To adjust the exposure for backlit subjects,
press . (BACK LIGHT) to display .. To
cancel the back light function, press
. (BACK LIGHT) again.
Starting to record quickly
(QUICK ON)
Recording in dark places
(NightShot plus)
QUICK ON
l
amp
Infrared port
Adjusting the exposure for
backlit subjects
Recording in mirror mode
Continued ,
42
Recording (Continued)
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
z Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
When recording in mirror mode, the images are
not displayed in the viewfinder.
43
Recording/Playback
Playback
You can play back images recorded on the media selected in the media setting (p. 28).
DCR-DVD110E/DVD115E/DVD310E/DVD610E/DVD710E
In the default setting, movies on a disc are played. Still images are recorded and played on a
“Memory Stick PRO Duo” only.
DCR-DVD410E/DVD810E
In the default setting, images in the internal memory are played.
1 Turn the POWER switch A to turn on your camcorder.
2 Press (VIEW IMAGES) B (or C).
The VISUAL INDEX screen appears on the screen. (It may take some time to display the
thumbnails.)
POWER switch A
(VIEW IMAGES) B
(VIEW IMAGES) C
(HOME) E
Power zoom lever F
(HOME) D
Previous 6 images
Next 6 images
Searches for images by
recording date (p. 46).*
Appears with the image on
each of the tab that was lastly
played back/recorded (B for
the still image recorded on
“Memory Stick PRO Duo”).
Returns to the recording
screen.
(OPTION)
* When you select [DISC] on [MOVIE MEDIA SET] (p. 28), a disc type appears. You cannot
search for movies by recording date.
Film Roll Index (p. 45)
Face Index (p. 45)
Displays movies.
Displays still images.
Continued ,
44
Playback (Continued)
z Tips
The number of the images on the VISUAL INDEX screen can be changed 6 y 12 by moving the power
zoom lever
F. To fix this number, touch (HOME) D (or E) t (SETTINGS) t [VIEW
IMAGES SET] t [ DISPLAY] (p. 85).
3 Start playback.
Touch the tab and the movie to be played back.
When playback from the selected movie reaches the last movie, the screen returns to the
VISUAL INDEX screen.
z Tips
Touch / during pause to play back movie slowly.
When playing movies from the internal memory (DCR-DVD410E/DVD810E) or from a “Memory Stick
PRO Duo,” one touch of / makes the movie reverse/fast forward about 5 times faster than
normal, 2 touches about 10 times, 3 touches about 30 times, and 4 touches about 60 times faster.
When playing the movies on a disc, one touch of / makes the movie reverse/fast forward
about 5 times faster than normal, 2 touches about 10 times faster (about 8 times faster for a DVD+RW).
Touch the tab and the still image to be played back.
Movies
Still Images
Beginning of the movie/
previous movie
Toggles Play or Pause as
you touch.
Next movie
Stop (goes to the VISUAL
INDEX screen.)
Reverse/ Forward
Returns to the VISUAL
INDEX screen.
(OPTION)
Slide show (p. 47)
Previous/Next
Goes to the VISUAL
INDEX screen.
Returns to the VISUAL
INDEX screen.
(OPTION)
45
Recording/Playback
To adjust the sound volume of movies
While playing back movies, touch
(OPTION) t tab t [VOLUME],
then adjust the volume with / .
z Tips
You can switch screen to the VISUAL INDEX
screen by touching (HOME) D (or E) t
(VIEW IMAGES) t [VISUAL INDEX].
Movies can be divided by a set time, and
the first scene of each division is displayed
on the INDEX screen. You can start playing
back a movie from the selected scene.
Select beforehand media which contains the
movie you want to play back (p. 28).
1 Press (VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
2 Touch (Film Roll Index).
3 Touch / to select the desired
movie.
4 Touch / to search for the
desired scene.
Playback starts from the selected scene.
z Tips
You can display the Film Roll Index screen by
touching (HOME) t (VIEW
IMAGES) t [ INDEX].
The detected face images during recording
are displayed on the INDEX screen.
You can play back the movie from the
selected face image.
Select beforehand media which contains the
movie you want to play back (p. 28).
1 Press (VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
2 Touch (Face Index).
3 Touch / to select the desired
movie.
Searching for scenes with
pinpoint accuracy (Film Roll
Index)
Previous scene
Previous/Next movie
Changes the interval of scenes.
Next scene
Searching for desired scenes by
a face (Face Index)
Previous/Next face image
Previous/Next movie
Continued ,
46
Playback (Continued)
4 Touch / to search for the
desired face image, then select
the face image of the scene you
want to play back.
Playback starts from the selected scene.
b Notes
Faces may not be detected depending on
recording conditions.
Example: People wearing glasses or hats, or not
facing towards the camera.
Set [ INDEX SET] to [ON] (the default
setting) before recording to play back movies
from [ INDEX] (p. 82). Face Index may not
appear properly if no face was detected.
z Tips
You can display the Face Index screen by
touching (HOME) t (VIEW
IMAGES) t [ INDEX].
You can efficiently search for desired
images by date.
Select beforehand media which contains the
movie you want to play back (p. 28).
b Notes
You cannot use the Date Index with the disc,
and still images on the “Memory Stick PRO
Duo.”
1 Press (VIEW IMAGES) on your
camcorder.
The VISUAL INDEX screen appears.
2 To search for movies, touch the
tab. To search for still
images, touch the tab.
3 Touch the date button at the
upper right corner of the screen.
The recording dates of images are
displayed on the screen.
4 Touch / to select the
recording date of the desired
images, then touch .
The images recorded on the selected
date are displayed on the screen.
z Tips
On the Film Roll Index screen or the Face Index
screen, you can display the Date Index function
by following the steps 3 to 4.
You can magnify still images from about
1.1 to 5 times the original size.
Magnification can be adjusted with the
power zoom lever or the zoom buttons on
the LCD frame.
Searching for desired images by
date (Date Index)
Using PB zoom
Previous/Next date
47
Recording/Playback
1 Play back the still image you want to
magnify.
2 Magnify the still image with T
(Telephoto).
The screen is framed.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch .
Touch on the still image playback
screen.
The slide show begins from the selected
still image.
Touch to stop the slide show. To
restart, touch again.
b Notes
You cannot operate playback zoom during slide
show.
z Tips
You can also play back the slide show by
touching (OPTION) t tab t [SLIDE
SHOW] on the VISUAL INDEX screen.
While playing back still images, you can set
continuous slide show playback by touching
(OPTION) t tab t [SLIDE SHOW
SET]. As the default setting is [ON], is
displayed on the LCD screen and your
camcorder repeats a slide show of still images.
If you set [SLIDE SHOW SET] to [OFF], your
camcorder plays the still images in slide show
mode once, starting from the selected still
image.
Playing back a series of still
images (Slide show)
48
Playing the images on a TV
Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1
or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this operation (p. 20). Refer also to the instruction
manuals supplied with the devices to be connected.
1 A/V connecting cable (supplied)
Connect to the input jack of the other device.
2 A/V connecting cable with S VIDEO
(optional)
When connecting to the other device via the S
VIDEO jack, by using an A/V connecting cable
with S VIDEO (optional), higher quality
images can be produced than with an A/V
connecting cable. Connect the white and red
plugs (left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with S VIDEO (optional). The yellow
plug connection is not necessary. Connecting
only the S VIDEO plug will not output audio.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn on your camcorder.
2 Touch (HOME) t (SETTINGS)
t [OUTPUT SETTINGS] t [TV TYPE]
t [16:9] or [4:3] t .
: Signal flow
A/V Remote
Connector
S VIDEO
VIDEO
AUDIO
(Yellow)
(White)
(Red)
VCRs or TVs
IN
VIDEO
AUDIO
(White)
(Red)
IN
Device without
S VIDEO jack
Device with
S VIDEO jack
49
Recording/Playback
b Notes
When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the recorded
image’s aspect ratio switches between 16:9
(wide) and 4:3, the image may jitter.
When you play back an image recorded in 16:9
(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.
z Tips
You can display the counter on the TV screen by
setting [DISP OUTPUT] to [V-OUT/PANEL]
(p. 87).
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use a 21-pin adaptor (optional) to view
playback images.
TV/VCR
50
Editing
(OTHERS) category
This category enables you to edit or print
images on the media, or copy them onto
your computer for viewing, editing or
creating an original DVD.
b Notes
You can select the media of the image to be
edited by touching (HOME) t
(MANAGE MEDIA) t [MOVIE
MEDIA SET]/[PHOTO MEDIA SET] (p. 28).
DELETE
You can delete images on the media (p. 51).
PHOTO CAPTURE (DCR-DVD410E/
DVD610E/DVD710E/DVD810E)
You can capture a selected scene from a
recorded movie as a still image (p. 53).
MOVIE DUB (DCR-DVD410E/DVD610E/
DVD710E/DVD810E)
You can dub movies recorded on the
internal memory (DCR-DVD410E/
DVD810E) or a “Memory Stick PRO Duo”
(DCR-DVD610E/DVD710E/DVD810E) to
a disc (p. 55).
PHOTO COPY (DCR-DVD410E/
DVD810E)
You can copy still images recorded on the
internal memory to a “Memory Stick PRO
Duo” (p. 56).
EDIT
You can edit the images on the media
(p. 58).
PLAYLIST EDIT
You can create and edit a Playlist (p. 59).
PRINT
You can print still images on a connected
PictBridge printer (p. 64).
USB CONNECT
You can connect your camcorder to a
computer or another device using the USB
cable (p. 97).
Item list
(OTHERS) category
51
Editing
Deleting images
b Notes
You cannot restore images once they are
deleted.
z Tips
You can select up to 100 images at one time.
Select beforehand the media which contains
the movie you want to delete (p. 28).
b Notes
When you select [DISC] on [MOVIE MEDIA
SET] (p. 28), you cannot delete movies during
Easy Handycam operation (p. 34). Cancel Easy
Handycam operation first.
1 Touch (HOME) t
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE].
4 Touch the movie to be deleted.
The selected movie is marked with .
Press and hold the movie on the screen
to confirm.
Touch to return to the previous
screen.
5 Touch t [YES].
6 When [Completed.] appears,
touch .
To delete all movies at one time
1 In step 3, touch [ DELETE ALL].
2 Touch [YES] t [YES].
3 When [Completed.] appears, touch .
To delete all the movies recorded on
the same day at one time
1 In step 3, touch [ DELETE by date].
2 Touch / to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Touch the movie on the screen to
confirm.
Touch to return to the previous
screen.
3 Touch t [YES].
4 When [Completed.] appears, touch .
Deleting movies
Previous/Next date
Continued ,
52
Deleting images (Continued)
To delete the most recently recorded
movie
1 In step 3, touch [ LAST SCENE
DEL].
2 Touch t [YES].
3 When [Completed.] appears, touch .
You cannot delete the most recently
recorded movie:
if you remove the disc from your
camcorder after recording.
if you turn off your camcorder after
recording.
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting
movies.
Do not remove the “Memory Stick PRO Duo”
while deleting movies from the “Memory Stick
PRO Duo.”
If the deleted movie is included in a Playlist
(p. 59), the movie is deleted also from the
Playlist.
You cannot delete movies from the “Memory
Stick PRO Duo” if the movies are protected by
another device.
Even if you delete unnecessary movies from the
disc, the remaining disc capacity may not
increase as much as you can make additional
recording.
z Tips
To delete all images recorded on the media and
recover all the recordable space of the media,
format the media (p. 72).
You can delete a movie when viewing it by
touching (OPTION).
Select beforehand the media which contains
the still image you want to delete (p. 28).
1 Touch (HOME) t
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE].
4 Touch the still image to be
deleted.
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
Touch to return to the previous
screen.
5 Touch t [YES].
6 When [Completed.] appears,
touch .
To delete all still images at one time
1 In step 3, touch [ DELETE ALL].
2 Touch [YES] t [YES].
3 When [Completed.] appears, touch .
Deleting still images
53
Editing
To delete all the still images recorded
on the same day at one time
1 In step 3, touch [ DELETE by date].
2 Touch / to select the recording
date of the desired still images, then
touch .
The still images recorded on the
selected date are displayed on the
screen.
Touch the still image on the screen to
confirm.
Touch to return to the previous
screen.
3 Touch t [YES].
4 When [Completed.] appears, touch .
b Notes
You cannot delete still images from the
“Memory Stick PRO Duo” if the still images are
protected by another device.
z Tips
To delete all images recorded in the internal
memory (DCR-DVD410E/DVD810E) or a
“Memory Stick PRO Duo,” and recover all the
recordable space of the media, format the media
(p. 72).
You can delete a still image when viewing it by
touching (OPTION).
Previous/Next date
Capturing a still
image from a movie
(DCR-DVD410E/
DVD610E/DVD710E/
DVD810E)
You can capture a still image at any point
during movie playback.
Select the media which contains the movies
beforehand, and the media where you want
to save the still images (p. 28).
When you select [MEMORY STICK] to
save the still images, insert a “Memory
Stick PRO Duo” beforehand.
The media you can select depends on your
camcorder model. See the table below.
b Notes
Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
1 Touch (HOME) t
(OTHERS) t [PHOTO
CAPTURE].
The [PHOTO CAPTURE] screen
appears.
Model Movies in Still images in
DCR-
DVD410E
t
t
DCR-
DVD610E/
DVD710E
t
t
DCR-
DVD810E
t
t
t
t
t
t
Continued ,
54
Capturing a still image from a movie (DCR-DVD410E/DVD610E/DVD710E/
DVD810E) (Continued)
2 Touch the movie that you want to
play back and capture an image
from.
The selected movie is played back.
3 Touch to pause at the point
where you want to capture.
The movie pauses.
Play and pause toggles as you press
.
4 Touch .
appears while the still image is
captured and stored on the media you
selected.
To capture another still image, touch
and repeat from step 2.
To finish the operation, touch t
.
b Notes
The media where you want to save still images
has to have enough free space.
Recording date and time of created still images
are the same as the recording date and time of
the movies.
If the movies do not have data code, recording
date and time of still images are saved as the
time you create them from the movies.
Returns to the beginning of the
selected movie.
Adjusts the capturing point with more
precision after the capturing point has
been selected with .
55
Editing
Dubbing/copying images to media within your
camcorder
You can dub movies from the internal
memory (DCR-DVD410E/DVD810E)
or a “Memory Stick PRO Duo” (DCR-
DVD610E/DVD710E/DVD810E) to a disc.
Insert a disc in your camcorder beforehand.
The media you can select depends on your
camcorder model. See the table below.
b Notes
Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
z Tips
To check dubbed movies on the disc, select
[DISC] on [MOVIE MEDIA SET] (p. 28).
1 Touch (HOME) t
(OTHERS) t [MOVIE DUB].
Or, press DUBBING on your
camcorder (DCR-DVD410E/
DVD810E).
The [MOVIE DUB] screen appears.
2 DCR-DVD810E:
Touch media which contains the
movie to be dubbed.
DCR-DVD410E/DVD610E/
DVD710E:
Step 2 is unnecessary. Go to step 3.
3 Touch [DUB by select].
4 Touch the movie to be dubbed.
The selected movie is marked with .
Press and hold the movie on the screen
to confirm.
Dubbing movies (DCR-
DVD410E/DVD610E/DVD710E/
DVD810E)
Model From To
DCR-
DVD410E
t
DCR-
DVD610E/
DVD710E
t
DCR-
DVD810E
t
t
Remaining disc space*
* x: Used
x (green): To be used to save the selected
movie
s: Free space
Continued ,
56
Dubbing/copying images to media within your camcorder (Continued)
Touch to return to the previous
screen.
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
5 Touch t [YES].
6 When [Completed.] appears,
touch .
To dub all the movies recorded on the
same day at one time
1 In step 3, touch [DUB by date].
2 Touch / to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Touch the movie on the screen to
confirm.
Touch to return to the previous
screen.
3 Touch t [YES].
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
4 When [Completed.] appears, touch .
To dub all movies in a Playlist (p. 59)
1 In step 3, touch [ DUB ALL].
If the disc space is not sufficient to
record the entire movie, [Not enough
memory space.] appears.
2 Touch [YES].
3 When [Completed.] appears, touch .
To back up movies that have not been
backed up yet
1 In step 3, touch [BACKUP].
2 Touch [Backs up unbacked up movies.]
t [YES].
3 When [Completed.] appears, touch .
If the disc space is not sufficient to
record the entire movie, [Disc is full.]
appears, and the number of one-sided
discs required will be displayed. Prepare
discs, and repeat from step 1.
b Notes
If movies are backed up on 2 or more discs, the
movie recorded at the end of each disc is
divided automatically to fit in the full disc
capacity.
z Tips
In step 3, by touching [BACKUP] t [Backup
starts from the first movie. Previous backup
history will be deleted.], you can back up all
movies, including movies that have been backed
up previously. Your camcorder will keep a
backup history of movies only when they are
saved with the [BACKUP] function.
You can copy still images from the internal
memory to a “Memory Stick PRO Duo.
Insert a “Memory Stick PRO Duo” into
your camcorder beforehand.
Previous/Next date
Copying still images (DCR-
DVD410E/DVD810E)
From To
t
57
Editing
b Notes
Using the AC Adaptor as the power source is
recommended to prevent the power from being
turned off during operation.
z Tips
To check the copied still images, select
[MEMORY STICK] on [PHOTO MEDIA SET]
(p. 28).
1 Touch (HOME) t
(OTHERS) t [PHOTO COPY].
The [PHOTO COPY] screen appears.
2 Touch [COPY by select].
3 Touch the still image to be
copied.
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
Touch to return to the previous
screen.
4 Touch t [YES].
5 When [Completed.] appears,
touch .
To copy all the still images recorded
on the same day at one time
1 In step 2, touch [COPY by date].
2 Touch / to select the recording
date of the desired still images, then
touch .
The still images recorded on the
selected date are displayed on the
screen.
Touch the still image on the screen to
confirm.
Touch to return to the previous
screen.
3 Touch t [YES].
4 When [Completed.] appears, touch .
Previous/Next date
58
Dividing movies
Select beforehand the media which contains
the movie you want to divide (p. 28).
1 Touch (HOME) t
(OTHERS) t [EDIT].
2 Touch [DIVIDE].
3 Touch the movie that you want to
divide.
The selected movie is played back.
4 Touch at the point where
you want to divide.
The movie pauses.
Play and pause toggles as you press
.
5 Touch t [YES].
6 When [Completed.] appears,
touch .
b Notes
You cannot restore movies once they are
divided.
Do not remove the battery pack or the AC
Adaptor from your camcorder while dividing
movies.
Do not remove the “Memory Stick PRO Duo”
while dividing movies in the “Memory Stick
PRO Duo.”
When you select [INT. MEMORY] (DCR-
DVD410E/DVD810E) or [MEMORY STICK]
on [MOVIE MEDIA SET] (p. 28), and the
divided original movie is included in a Playlist,
the movie in the Playlist will also be divided.
When you select [DISC] on [MOVIE MEDIA
SET] (p. 28), the movie in a Playlist is not
divided.
A slight difference may occur from the point
where you touch and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
z Tips
You can divide a movie when viewing it by
touching (OPTION).
The images recorded on your camcorder are
called “original.”
Returns to the beginning of the
selected movie.
Adjusts the dividing point with more
precision after the dividing point has
been selected with .
59
Editing
Creating the Playlist
A Playlist is a list showing thumbnails of
the movies that you have selected. The
original scenes are not changed even
though you edit or delete the movies in the
Playlist.
Select beforehand the media to use to
create, play, or edit a Playlist (p. 28).
z Tips
To a Playlist, you can add a maximum of 99
movies on the internal memory (DCR-
DVD410E/DVD810E) or a “Memory Stick
PRO Duo,” or 999 movies on a disc.
The images recorded on your camcorder are
called “original.”
1 Touch (HOME) t
(OTHERS) t [PLAYLIST
EDIT].
2 Touch [ ADD].
3 Touch the movie to be added to
the Playlist.
.
The selected movie is marked with .
Press and hold the movie on the screen
to confirm.
Touch to return to the previous
screen.
4 Touch t [YES].
5 When [Completed.] appears,
touch .
To add all the movies to the Playlist
1 In step 2, touch [ ADD ALL].
2 Touch [YES] t [YES].
3 When [Completed.] appears, touch .
To add all the movies recorded on the
same day at one time
1 In step 2, touch [ ADD by date].
2 Touch / to select the recording
date of the desired movies, then touch
.
The movies recorded on the selected
date are displayed on the screen.
Touch the movie on the screen to
confirm.
Touch to return to the previous
screen.
3 Touch t [YES].
4 When [Completed.] appears, touch .
Previous/Next date
Continued ,
60
Creating the Playlist (Continued)
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while adding the
movies.
Do not remove the “Memory Stick PRO Duo”
while adding movies in the “Memory Stick PRO
Duo.”
You cannot add still images to a Playlist.
z Tips
You can add a movie when viewing it by
touching (OPTION).
You can copy the Playlist to a disc as it is, by
using the supplied software.
Select beforehand the media to use to
create, play or edit a Playlist (p. 28).
1 Touch (HOME) t (VIEW
IMAGES) t [PLAYLIST].
The movies in the Playlist screen
appear.
2 Touch the movie from which you
want to play back.
The Playlist is played back from the
selected movie to the end, then the
screen returns to the Playlist screen.
To erase unnecessary movies from
the Playlist
1 Touch (HOME) t (OTHERS)
t [PLAYLIST EDIT].
2 Touch [ ERASE].
To erase all the movies from the
Playlist, touch [ ERASE ALL] t
[YES] t [YES]. Then, when
[
Completed.] appears, touch .
3 Touch the movie to be erased from the
Playlist.
The selected movie is marked with .
Press and hold the movie on the screen
to confirm.
Touch to return to the previous
screen.
4 Touch t [YES].
5 When [Completed.] appears, touch .
z Tips
The original movies are not erased even if you
erase movies from the Playlist.
Playing the Playlist
61
Editing
To change the order within the Playlist
1 Touch (HOME) t (OTHERS)
t [PLAYLIST EDIT].
2 Touch [ MOVE].
3 Select the movie that you want to move.
The selected movie is marked with .
Press and hold the movie on the screen
to confirm.
Touch to return to the previous
screen.
4 Touch .
5 Select the destination with / .
6 Touch t [YES].
7 When [Completed.] appears, touch .
z Tips
When you select multiple movies, the movies
are moved following the order appeared in the
Playlist.
To divide a movie in the Playlist
1 Touch (HOME) t (OTHERS)
t [PLAYLIST EDIT].
2 Touch [DIVIDE].
3 Touch the movie that you want to
divide.
The selected movie is played back.
4 Touch at the point where you
want to divide.
The movie pauses.
Play and pause toggles as you press
.
5 Touch t [YES].
6 When [Completed.] appears, touch .
b Notes
A slight difference may occur from the point
where you touch and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
z Tips
The original movies are not divided even if you
divide the movie in the Playlist.
Destination bar
Returns to the beginning of the
selected movie.
Adjusts the dividing point with more
precision after the dividing point has
been selected with .
62
Dubbing movies to VCR or DVD/HDD recorders
You can dub movies played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 20). Refer also to the instruction manuals supplied with the devices to be
connected.
b Notes
Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
Connect to the input jack of the other
device.
B A/V connecting cable with S
VIDEO (optional)
When connecting to the other device via
the S VIDEO jack, by using an A/V
connecting cable with S VIDEO
(optional), higher quality movies can be
produced than with an A/V connecting
cable. Connect the white and red plugs
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V
connecting cable with S VIDEO
(optional). The yellow plug connection
is not necessary. Connecting only the S
VIDEO plug will not output audio.
b Notes
To hide the screen indicators, such as a counter
on the screen of the monitor device connected,
Connecting a device with the A/V connecting cable
A/V Remote
Connector
S VIDEO
VIDEO
AUDIO
(Yellow)
(White)
(Red)
IN
VIDEO
AUDIO
(White)
(Red)
IN
Device without
S VIDEO jack
Device with
S VIDEO jack
VCRs or DVD/HDD recorders
: Video/Signal flow
63
Editing
touch (HOME) t (SETTINGS) t
[OUTPUT SETTINGS] t [DISP OUTPUT]
t [LCD PANEL] (the default setting) (p. 87).
To record the date/time and camera settings
data, display them on the screen (p. 84).
When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
1 Turn on your camcorder.
2 Select the media which contains
the movie you want to dub (p. 28).
3 Press (VIEW IMAGES).
Set [TV TYPE] according to the display
device (p. 48).
4 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
5 Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) 1 or
an A/V connecting cable with S
VIDEO (optional) 2.
Connect your camcorder to the input
jacks of the recording device.
6 Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals
supplied with your recording device for
details.
7 When dubbing is finished, stop
the recording device, and then
your camcorder.
By connecting a DVD writer, etc. that is
capable of movie dubbing via USB
connection to your camcorder, you can dub
movies without the declination of their
image quality.
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC
Adaptor for this operation (p. 21). Refer
also to the instruction manuals supplied
with the devices to be connected.
1 Turn on your camcorder.
Connecting a device with the
USB cable
Continued ,
64
2 Connect the (USB) jack of your
camcorder to a DVD writer, etc.
using the supplied USB cable
(p. 129).
The [USB SELECT] screen appears on
the screen.
3 Touch media which contains the
movie to be dubbed.
4 Start recording on the connected
device.
Refer to the instruction manuals
supplied with the connected device for
details.
5 When dubbing is finished, touch
[END] t [YES] and disconnect
the USB cable.
Printing still images
(PictBridge compliant
printer)
You can print out still images using a
PictBridge compliant printer, without
connecting the camcorder to a computer.
Connect your camcorder to the AC Adaptor
to obtain power from the wall outlet (wall
socket) (p. 20).
Select beforehand the media which contains
the still image you want to print (p. 28).
Also, turn on the printer.
To print still images on a “Memory Stick
PRO Duo,” insert the “Memory Stick PRO
Duo” containing them into your camcorder.
1 Turn on your camcorder.
2 Connect the (USB) jack of your
camcorder to the printer using
the supplied USB cable (p. 129).
The [USB SELECT] screen appears on
the screen.
3 Touch [PRINT].
When connection is complete,
(PictBridge connecting) appears on the
screen.
Dubbing movies to VCR or DVD/
HDD recorders (Continued)
65
Editing
4 Touch the still image to be
printed.
The selected still image is marked with
.
Press and hold the still image on the
screen to confirm.
Touch to return to the previous
screen.
5 Touch (OPTION), set the
following options, then touch
.
[COPIES]: Set number of copies of a
still image to be printed. You can set up
to 20 copies.
[DATE/TIME]: Select [DATE],
[DAY&TIME], or [OFF] (no date/time
printed).
[SIZE]: Select the paper size.
If you do not change the setting, go to
step 6.
6 Touch [EXEC] t [YES].
7 When [Completed.] appears,
touch .
The still image selection screen appears
again.
To finish printing
On the INDEX screen of still images, touch
.
b Notes
We can guarantee the operation of only models
that are PictBridge compatible.
Refer also to the instruction manual of the
printer to be used.
Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
To operate the POWER switch
To press (VIEW IMAGES)
To disconnect the USB cable from your
camcorder or the printer
To remove the “Memory Stick PRO Duo”
from your camcorder
If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
You can select only the paper sizes that the
printer can print.
On some printer models, the top, bottom, right,
and left edges of still images may be trimmed. If
you print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
Some printer models may not support the date
printing function. Refer to your printer’s
instruction manual for details.
You may not be able to print the following:
still images edited by a computer
still images recorded by other devices
still images of 4MB or more
still images with a pixel size larger than
3,680 × 2,760
z Tips
PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
You can print a still image when viewing it by
touching (OPTION).
66
Utilizing Media
(MANAGE MEDIA) category
This category enables you to use the media
for various purposes.
MOVIE MEDIA SET
You can select the media for movies
(p. 28).
PHOTO MEDIA SET (DCR-DVD410E/
DVD810E)
You can select the media for still images
(p. 28).
FINALIZE
You can enable discs to be played on other
devices by finalizing them (p. 67).
MEDIA INFO
You can display the media information,
such as recordable time (p. 71).
MEDIA FORMAT
You can format the media and recover the
recordable free space (p. 72).
UNFINALIZE
You can unfinalize a disc and record more
images on the disc (p. 74).
DISC SELECT GUIDE
Your camcorder advises you of the right
disc for your purpose (p. 75).
REPAIR IMG.DB F.
You can repair the image database file of
the internal memory (DCR-DVD410E/
DVD810E) or “Memory Stick PRO Duo”
(p. 76).
Item list
(MANAGE MEDIA) category
67
Utilizing Media
Making the disc compatible with playback on
other devices (Finalizing)
Finalizing makes the recorded disc compatible for playback with other devices and DVD
drives of computers.
Before finalizing, you can select the style of the DVD menu which displays the movie list
(p. 69).
Finalizing is required depending on the type of disc.
DVD-RW/DVD-R/DVD+R DL: Finalizing is required.
DVD+RW: Finalizing is not required, except in the following cases:
1 To create a DVD menu
2 To play back on a computer DVD drive
3 If the disc has a short total recording time (less than 5 min. in HQ mode, 8 min. in SP mode,
or 15 min. in LP mode)
b Notes
Playback compatibility with all devices is not guaranteed.
No DVD menu is created for DVD-RW (VR mode).
To play back a disc in other devices for the first time (p.69)
Operation flow
Make desired settings
for the DVD menu.
In case 1, 2
or 3
Playback on
other devices
Finalize
Continued ,
68
Making the disc compatible with playback on other devices (Finalizing)
(Continued)
To add movies to a finalized disc (p.74)
b Notes
During Easy Handycam operation (p. 34), even when you are using a DVD-RW or DVD+RW, you cannot
record additional movies onto the disc after finalizing the disc. Cancel Easy Handycam operation.
To play back a disc in other devices after adding movies (p.69)
Make a new
recording
Movies cannot be
added.
Unfinalize the disc.
When the DVD menu has been created, a
confirmation screen prompts you to confirm
that you wish to add movies.
Movies can be added as usual.
Only in case 1
Make desired settings
for the DVD menu.
Playback on
other devices
Finalize
69
Utilizing Media
b Notes
It takes from a minute to a maximum of several
hours to finalize a disc. The shorter the amount
of material recorded on the disc, the longer it
takes for finalizing.
1 Place your camcorder in a stable
place, and connect the AC
Adaptor to the DC IN jack on your
camcorder.
2 Turn on your camcorder.
3 Insert the disc to be finalized.
4 Touch (HOME) t
(MANAGE MEDIA) t
[FINALIZE].
To select a DVD menu style, touch
(OPTION) t [DVD MENU]
(p. 69).
Go to step 5 if you want to finalize the
disc using [STYLE1] (the default
setting).
5 Touch [YES] t [YES].
Finalizing starts.
6 When finalizing is completed,
touch .
b Notes
When you finalize a double-sided disc, you
must finalize each side of the disc individually.
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during finalizing.
When you need to disconnect the AC Adaptor,
make sure that the power of your camcorder is
set to off and disconnect the AC Adaptor after
the (Movie) or (Still) lamp goes off.
Finalizing restarts when you connect the AC
Adaptor and turn on your camcorder again.
z Tips
When you set to create a DVD menu and
finalize the disc, the DVD menu appears for a
few seconds while finalizing the disc.
After the disc is finalized, “ ” is attached
at the bottom of the disc indicator, such as
” in the case of DVD-RW (VIDEO
mode).
To select a DVD menu style
1 In step 4, touch (OPTION) t
[DVD MENU].
2 Select the desired style from 4 types of
pattern with / .
Select [NO MENU] if you do not create
a DVD menu.
3 Touch .
Finalizing a disc
Continued ,
70
b Notes
During Easy Handycam operation (p. 34), the
DVD menu style is fixed to [STYLE1].
You cannot create a DVD menu for a DVD-RW
(VR mode).
Playing a disc on
other devices
Finalizing a disc (p. 67) allows you to view
movies recorded by your camcorder on
other DVD devices. However, we do not
guarantee proper playback on all devices.
You can play back DVD+RW on other
devices without finalizing the disc.
b Notes
Do not use an 8 cm CD adaptor with an 8 cm
DVD as it may cause a malfunction.
Make sure that a vertically installed device is
placed in a position such as that the disc can be
placed horizontally.
On some devices, some discs may not be played
back, movies may freeze for an instant between
scenes, or some functions may be disabled.
z Tips
Devices that support subtitles can display the
recording date and time where the subtitles
normally appear (p. 82). Refer to the instruction
manual of your device.
If you have created a DVD menu (p. 69), you
can select the desired scene in the menu.
If you finalize the disc (p. 67) that was
recorded on your camcorder, you can play
back the disc on a computer that DVD
playback application is installed.
b Notes
Even when you use a DVD+RW, you must
finalize the disc (p. 67). Otherwise, a
malfunction may occur.
Make sure that the DVD drive of the computer
can play an 8 cm DVD.
Do not use an 8 cm CD adaptor with an 8 cm
DVD as it may cause a malfunction.
The disc may not be played back, or the movies
may not be played smoothly on some
computers.
Movies stored on a disc cannot be copied
directly onto a computer to be played back or
edited.
Playing a disc on other devices
Playing a disc on a computer
Making the disc compatible with playback
on other devices (Finalizing) (Continued)
71
Utilizing Media
z Tips
For details on operations and procedures, see the
“PMB Guide” on the supplied CD-ROM (p. 97).
The volume label of the disc
The date when the disc was first used is
recorded.
<e.g.>
When the disc was first used at 0:00 am on
January 1st 2008:
2008_01_01_00H00M_AM
z Tips
Movies on discs are stored in the following
folders:
DVD-RW (VR mode)
DVD_RTAV folder
Other discs and modes
VIDEO_TS folder
Volu me
label
Checking media
information
You can check the remaining recordable
time or space of the media selected on
[MOVIE MEDIA SET] (p. 28).
Touch (HOME) t (MANAGE
MEDIA) t [MEDIA INFO].
You can check other information by
touching .
To turn off the display, touch .
b Notes
The calculation for the space of the internal
memory (DCR-DVD410E/DVD810E) and
“Memory Stick PRO Duo” is 1MB = 1,048,576
bytes. The fractions less than 1 MB are
discarded when the media space is displayed.
Therefore, the total amount of available and
unavailable space appears slightly smaller.
Since there is an image database file area, the
used space is not displayed as 0 MB even if you
perform [MEDIA FORMAT] (p. 72).
z Tips
Only the information for the media selected on
[MOVIE MEDIA SET] is displayed. Change
the media setting as necessary (p. 28).
72
Formatting media
Formatting deletes all images and returns
the recording media to its original empty
state.
To avoid the loss of important images, dub
or copy them on other media (p. 55, 62)
before performing [MEDIA FORMAT].
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn on your camcorder.
3 When formatting a “Memory Stick
PRO Duo,” insert the “Memory
Stick PRO Duo” to be formatted
into your camcorder.
4 Touch (HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [INT. MEMORY]
(DCR-DVD410E/DVD810E) or
[MEMORY STICK].
5 Touch [YES] t [YES].
6 When [Completed.] appears,
touch .
b Notes
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during formatting.
Even the images protected with another device
against accidental deletion are also deleted.
Do not attempt the following operations when
[Executing...] is on the screen:
To operate the POWER switch or buttons
To remove the “Memory Stick PRO Duo”
when formatting the “Memory Stick PRO
Duo”
A DVD-R/DVD+R DL cannot be
formatted. Replace it with a new
disc.
If you format a finalized disc
A DVD-RW (VIDEO mode) returns to
the unfinalized state. The disc must be
finalized again to view its contents on
other devices.
In the case of a DVD-RW (VR mode)/
DVD+RW, formatting deletes all movies
on a finalized disc. Even after formatting,
or will appear on the screen.
You do not need to finalize the disc again
before playing the disc on other devices.*
* To create the DVD menu on a DVD+RW,
finalize the disc again (p. 69).
Formatting the internal memory
(DCR-DVD410E/DVD810E) or
“Memory Stick PRO Duo”
Formatting the disc
73
Utilizing Media
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn on your camcorder.
3 Insert the disc to be formatted
into your camcorder.
4 Touch (HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [DISC].
x DVD-RW
Select the recording format, [VIDEO]
or [VR] (p. 12), then touch
.
x DVD+RW
Select the aspect ratio of the movie,
[16:9 WIDE] or [4:3], then touch .
5 Touch [YES].
6 When [Completed.] appears,
touch .
b Notes
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during formatting.
When you use a double-sided disc, formatting is
required on each side. You can format each side
in the different recording format.
In the case of DVD+RW, you cannot change the
movie aspect ratio midway. Format the disc
again to change the aspect ratio.
You cannot format a disc that has been
protected on other devices. Cancel the
protection with the original device, and then
format it.
z Tips
When you format a DVD-RW during Easy
Handycam operation (p. 34), the recording
format is fixed to VIDEO mode.
74
Recording additional movies after finalizing
You can record additional movies on the
finalized DVD-RW (VIDEO mode)/
DVD+RW discs after the following steps, if
the disc has free space.
When using the finalized DVD-RW (VR
mode), you can record additional movies on
the disc without any additional steps.
b Notes
You cannot record additional movies on
the DVD-R/DVD+R DL after finalizing.
Use a new disc.
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn on your camcorder.
3 Insert the finalized disc into your
camcorder.
4 Touch (HOME) t
(MANAGE MEDIA) t
[UNFINALIZE].
5 Touch [YES] t [YES].
6 When [Completed.] appears,
touch .
If you have created a DVD menu (p. 69)
during finalizing, you must perform the
following steps prior to recording
additional movies.
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn the POWER switch to turn
on the (Movie) lamp.
3 Insert the finalized disc into your
camcorder.
A confirmation screen appears to
prompt you to confirm that you wish to
record additional movies.
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch .
When using a DVD-RW (VIDEO
mode) (Unfinalizing)
When using a DVD+RW
75
Utilizing Media
b Notes
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during the operation.
A DVD menu created during finalizing is
deleted.
For a double-sided disc, perform these steps for
each side of the disc.
Finding the right disc
(DISC SELECT GUIDE)
Select the option that is right for you on the
screen, then you will be informed of the
appropriate disc for your purposes.
1 Touch (HOME) t
(MANAGE MEDIA) t [DISC
SELECT GUIDE].
2 Touch the option that is right for
you on the screen.
If you insert the same type of disc as
indicated in [DISC SELECT GUIDE],
you can format it with your selected
settings (p. 72).
76
Repairing the image database file
This function checks the image database
file and the consistency of movies and still
images on the internal memory (DCR-
DVD410E/DVD810E), or movies in the
“Memory Stick PRO Duo,” and repairs any
inconsistencies found.
1 Touch (HOME) t
(MANAGE MEDIA) t
[REPAIR IMG.DB F.] t [INT.
MEMORY] (DCR-DVD410E/
DVD810E) or [MEMORY STICK].
2 Touch [YES].
Your camcorder will check the image
database file.
When mismatching is not found, touch
to finish the operation.
3 Touch [YES].
4 When [Completed.] appears,
touch .
b Notes
Do not apply mechanical shock or vibration to
the camcorder during this operation.
Do not disconnect the AC Adaptor or remove
the battery pack.
While the image database file on the “Memory
Stick PRO Duo” are being repaired, do not
remove the “Memory Stick PRO Duo.”
Repairing for the internal memory (DCR-
DVD410E/DVD810E) and a “Memory Stick
PRO Duo” are performed separately.
77
Utilizing Media
Preventing data on the internal memory from
being recovered (DCR-DVD410E/DVD810E)
[ EMPTY] allows you to write
unintelligible data onto the internal
memory. In this way, it may become more
difficult to recover any original data. When
you dispose of or give the camcorder to
somebody, it is recommended that you
perform [ EMPTY].
b Notes
If you perform [ EMPTY], all the images are
deleted. To avoid the loss of important images,
dub or copy them on other media (p. 55, 62)
before performing [ EMPTY].
You cannot perform [ EMPTY] unless you
connect the AC Adaptor to the wall outlet (wall
socket).
Disconnect all cables except the AC Adaptor.
While performing [ EMPTY], do not apply
any vibrations or shocks to the camcorder.
1 Connect the AC Adaptor to the
DC IN jack on your camcorder,
then connect the power cord
(mains lead) to the wall outlet
(wall socket).
2 Turn on your camcorder.
3 Touch (HOME) t
(MANAGE MEDIA) t [MEDIA
FORMAT] t [INT. MEMORY].
The screen of formatting the internal
memory appears.
4 Press and hold the . (BACK
LIGHT) button down (p. 129).
The [ EMPTY] screen appears.
5 Touch [YES] t [YES].
6 When [Completed.] appears,
touch .
b Notes
If you stop performing [ EMPTY] while
[Executing...] is displayed, be sure to complete
the operation by performing [ EMPTY]
again before you use the camcorder the next
time.
78
Customizing Your Camcorder
What you can do with the (SETTINGS)
category of the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
1 Turn on your camcorder, then
press (HOME).
2 Touch (SETTINGS).
3 Touch the desired setup item.
If the item is not on the screen, touch
/ to change the page.
4 Touch the desired item.
If the item is not on the screen, touch
/ to change the page.
5 Change the setting, then touch
.
Using the HOME MENU
(HOME)
(HOME)
(SETTINGS) category
79
Customizing Your Camcorder
MOVIE SETTINGS (p. 80)
PHOTO SETTINGS (p. 82)
VIEW IMAGES SET (p. 84)
SOUND/DISP SET
*
4
(p. 86)
OUTPUT SETTINGS (p. 87)
CLOCK/ LANG (p. 88)
GENERAL SET (p. 88)
List of the (SETTINGS)
category items
Items Page
REC MODE
80
AUDIO MODE*
1
80
NIGHTSHOT LIGHT
80
WIDE SELECT
80
DIGITAL ZOOM
81
STEADYSHOT
81
AUTO SLW SHUTTR
81
GUIDEFRAME
81
REMAINING SET
81
SUB-T DATE
82
INDEX SET*
2
82
Items Page
IMAGE SIZE*
2
82
FILE NO.
83
NIGHTSHOT LIGHT
80
GUIDEFRAME
81
FLASH MODE*
2
*
3
83
FLASH LEVEL*
3
83
REDEYE REDUC*
3
84
Items Page
DATA CODE
84
DISPLAY
85
Items Page
VOLUME*
2
86
BEEP*
2
86
LCD BRIGHT
86
LCD BL LEVEL
86
LCD COLOR
86
VF B.LIGHT
86
Items Page
TV TYPE
87
DISP OUTPUT
87
Items Page
CLOCK SET*
2
24
AREA SET
88
SUMMERTIME
88
LANGUAGE SET*
2
88
Items Page
DEMO MODE
88
CALIBRATION
122
A.SHUT OFF
89
QUICK ON STBY
89
REMOTE CTRL*
3
89
*
1
DCR-DVD115E/DVD310E/DVD410E/
DVD710E/DVD810E
*
2
You can set these items also during Easy
Handycam operation (p. 34).
*
3
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
*
4
[SOUND SETTINGS] during Easy Handycam
operation (p. 34)
80
MOVIE SETTINGS
(Items for recording movies)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
You can select a recording mode to record a
movie with the image quality from 3 levels.
HQ ( )
Records in high quality mode.
(9M (HQ))
B SP ( )
Records in standard quality mode.
(6M (SP))
LP ( )
Increases the recording time (Long Play).
(3M (LP))
b Notes
If you record in LP mode, the quality of scenes
may be degraded, or scenes with quick
movements may appear with block noise when
you play back the movie.
z Tips
See page 13, 33 on the expected recording time
of each recording mode.
You can set the recording mode separately for
each media (p. 28).
REC MODE (Recording
mode)
You can select audio recording format.
B 5.1ch SURROUND ( )
Records 5.1ch surround sound.
2ch STEREO ( )
Records stereo sound.
When using either the NightShot plus
(p. 41) or the [S. NIGHTSHOT PLS]
(p. 95) function to record, you can record
clearer images by setting [NIGHTSHOT
LIGHT], which emits infrared light
(invisible). The default setting is [ON].
b Notes
Do not cover the infrared port with your fingers
or other objects (p. 131).
Remove the conversion lens (optional).
The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
When recording images, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
B 16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
4:3 ( )
Records images to the full screen on a 4:3
TV screen.
b Notes
Set [TV TYPE] correctly according to the TV
connected for playback (p. 48).
AUDIO MODE (DCR-
DVD115E/DVD310E/
DVD410E/DVD710E/
DVD810E)
NIGHTSHOT LIGHT
WIDE SELECT
81
Customizing Your Camcorder
You can select the maximum zoom level in
case you want to zoom greater than optical
zoom magnification. Note that the image
quality decreases when you use the digital
zoom.
DCR-DVD110E/DVD115E/DVD610E
B OFF
Up to 40 × zoom is performed optically.
80×
Up to 40 × zoom is performed optically, and
after that, up to 80 × zoom is performed
digitally.
2000×
Up to 40 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
B OFF
Up to 25 × zoom is performed optically.
50×
Up to 25 × zoom is performed optically, and
after that, up to 50 × zoom is performed
digitally.
2000×
Up to 25 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
You can compensate for camera shake. Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural. The default setting is
[ON].
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second. The default setting is [ON].
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
The default setting is [OFF].
z Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
B ON
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
When your camcorder recognizes the
remaining media capacity when the
POWER switch is set to (Movie).
When you press DISP/BATT INFO to
switch the indicator from off to on when
the POWER switch is set to (Movie).
When you select the movie recording
mode on the HOME MENU.
DIGITAL ZOOM
The right side of the bar shows the digital
zooming factor. The zooming zone appears
when you select the zooming level.
STEADYSHOT
AUTO SLW SHUTTR
(Auto slow shutter)
GUIDEFRAME
REMAINING SET
Continued ,
82
b Notes
When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
You can display the recording date and time
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instruction manual of the
playback device.
b Notes
You cannot set [SUB-T DATE] for the internal
memory (DCR-DVD410E/DVD810E) or a
“Memory Stick PRO Duo.”
S
The camcorder detects faces automatically
during movie recording. The default setting
is [ON].
Face icons and their meanings
: This icon appears when the setting is
[ON].
: This icon flashes when your camcorder
detects a face. The icon stops flashing when
the face is recorded in Face Index.
: This icon appears when faces cannot
be recorded in Face Index.
To play back scenes using Face Index, see
page 45.
b Notes
The number of faces detected in a movie is
limited.
SUB-T DATE
INDEX SET
PHOTO SETTINGS
(Items for recording still images)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
DCR-DVD110E/DVD115E/DVD610E
B VGA (0.3M) ( 640 × 480)
Records the still images of aspect ratio 4:3
clearly.
0.2M ( 640 × 360)
Records still images clearly in the 16:9
(wide) ratio.
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
B 1.0M ( 1152 × 864)
Records still images of aspect ratio 4:3
clearly.
0.7M ( 1152 × 648)
Records still images clearly in the 16:9
(wide) ratio.
VGA (0.3M) ( 640 × 480)
Records the maximum number of still
images of aspect ratio 4:3.
IMAGE SIZE
MOVIE SETTINGS (Continued)
83
Customizing Your Camcorder
Number of still images recordable on
the internal memory (DCR-DVD410E/
DVD810E)
You can record up to 9,999 still images on
the internal memory. The recordable
number of still images varies depending on
the recording condition.
Number of still images recordable on
a “Memory Stick PRO Duo” (approx.)
b Notes
Numbers in the table are of when using a
“Memory Stick PRO Duo” made by Sony
Corporation. The recordable number of still
images varies depending on the recording
conditions or the type of “Memory Stick.
z Tips
You can use a “Memory Stick PRO Duo” with a
capacity of 256MB or smaller for recording still
images.
The numbers in the table are of the recordable
number of still images of the maximum image
size that can be recorded with your camcorder.
Check the actual recordable number on the
screen when you are recording still images
(p. 133).
B SERIES
Assigns file numbers in sequence, even if
the “Memory Stick PRO Duo” is replaced
with another one.
RESET
Assigns individual file numbers for each
“Memory Stick PRO Duo.”
See page 80.
See page 81.
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
B ON ( )
Flashes every time.
AUTO
Flashes automatically.
b Notes
Remove any dust from the surface of the flash
before using it. Flash effect may be impaired if
heat discoloration or dust obscures the lamp.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
HIGH( )
Makes the flash level higher.
B NORMAL( )
LOW( )
Makes the flash level lower.
1.0M
1152 × 864
VGA (0.3M)
640 × 480
512MB
880 2800
1GB
1800 5800
2GB
3700 11500
4GB
7200 23000
8GB
14500 47000
FILE NO. (File number)
NIGHTSHOT LIGHT
GUIDEFRAME
FLASH MODE (DCR-
DVD310E/DVD410E/
DVD710E/DVD810E)
FLASH LEVEL (DCR-
DVD310E/DVD410E/
DVD710E/DVD810E)
Continued ,
84
You can set this function when you record
still images using an external flash
(optional) that is compatible with your
camcorder. If you set [FLASH MODE]
(p. 83) to [AUTO] or [ON] when
[REDEYE REDUC] is set to [ON],
appears on the screen. You can prevent
redeye by activating the pre-flash before
recording.
b Notes
The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
REDEYE REDUC
(Redeye reduction)
(DCR-DVD310E/
DVD410E/DVD710E/
DVD810E)
VIEW IMAGES SET
(Items to customize the display)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
During playback, your camcorder displays
the information (data code) recorded
automatically at the time of recording.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA
Displays camera setting data.
DATE/TIME
ADate
BTime
DATA CODE
PHOTO SETTINGS (Continued)
85
Customizing Your Camcorder
CAMERA DATA
CSteadyShot off
DBrightness
EWhite balance
FGain
GShutter speed
HAperture value
IExposure
z Tips
appears in the following cases.
Still images recorded on your camcorder
using an optional flash (DCR-DVD310E/
DVD410E/DVD710E/DVD810E)
Still images recorded on other cameras using
a flash
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: [DATE/TIME] t
[CAMERA DATA] t [OFF] (no indication)
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E).
Depending on the media condition, bars [--:--:--]
appear.
You can select the number of thumbnails that
appear on the VISUAL INDEX or Playlist
screen.
Thumbnail Glossary (p. 135)
B ZOOM LINK
Changes the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E).
Movie
Still image
DISPLAY
86
SOUND/DISP SET
(Items to adjust sound and the screen)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
(OPTION MENU) t page 90
The default settings are marked with B.
Touch / to adjust the volume
(p. 45).
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody and shutter sound.
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with / .
2 Touch .
z Tips
This adjustment does not affect the recorded
images in any way.
VOLUME
BEEP
LCD BRIGHT
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel to
the camcorder body, the setting becomes
[NORMAL] automatically.
z Tips
This adjustment does not affect the recorded
images in any way.
You can adjust the color of the LCD screen
with / .
z Tips
This adjustment does not affect the recorded
images in any way.
You can adjust the brightness of the
viewfinder.
B NORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
LCD BL LEVEL (LCD
backlight level)
LCD COLOR
VF B.LIGHT (Viewfinder
backlight)
Low intensity High intensity
87
Customizing Your Camcorder
b Notes
When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
z Tips
This adjustment does not affect the recorded
images in any way.
OUTPUT SETTINGS
(Items for when connecting other devices)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
The default settings are marked with B.
See page 48.
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
TV TYPE
DISP OUTPUT
88
CLOCK/ LANG
(Items to set clock and language)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
See page 24.
You can adjust a time difference without
stopping the clock.
Set your local area using / when
using your camcorder in other time zones.
Refer to the world time difference on page
115.
You can change this setting without
stopping the clock.
Set this to [ON] to move the time forward
1 hour.
You can select the language to be used on
the LCD screen.
z Tips
Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot find
your native tongue among the options.
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch /
to change the page.
How to set
(HOME MENU) t page 78
The default settings are marked with B.
You can view the demonstration in about
10 minutes, after you turn the POWER
switch to (Movie). The default setting
is [ON].
z Tips
The demonstration will be suspended in the
following situations.
When you press START/STOP.
When you press DUBBING (DCR-
DVD410E/DVD810E)
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
When you slide the disc cover OPEN switch.
When you move the POWER switch to still
image recording.
When you press (HOME)/ (VIEW
IMAGES).
See page 122.
CLOCK SET
AREA SET
SUMMERTIME
LANGUAGE SET
DEMO MODE
CALIBRATION
89
Customizing Your Camcorder
B 5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
You can set the time after which the
camcorder turns off automatically in sleep
mode. The default setting is [10min].
b Notes
[A.SHUT OFF] does not work in sleep mode (p.
41).
You can use the supplied Remote
Commander (p. 132). The default setting is
[ON].
z Tips
Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
A.SHUT OFF (Auto shut
off)
QUICK ON STBY
REMOTE CTRL (Remote
control) (DCR-DVD310E/
DVD410E/DVD710E/
DVD810E)
90
Activating functions using the OPTION MENU
The OPTION MENU appears just like the
pop-up window that appears when you
right-click the mouse on a computer.
Various functions are displayed.
1 While using your camcorder,
touch (OPTION) on the screen.
2 Touch the desired item.
If you cannot find the desired item,
touch another tab to change the page.
If you cannot find the item anywhere,
the function does not work under the
current situation.
3 Change the setting, then touch
.
b Notes
The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
Some items appear without a tab.
The OPTION MENU cannot be used during
Easy Handycam operation (p. 34).
Using the OPTION MENU
(OPTION)
Tab
91
Customizing Your Camcorder
Recording items on the OPTION
MENU
Items * Page
tab
FOCUS
-92
SPOT FOCUS
-92
TELE MACRO
-92
EXPOSURE
-93
SPOT METER
-93
SCENE SELECTION
-93
WHITE BAL.
-94
COLOR SLOW SHTR
-95
S. NIGHTSHOT PLS
-95
tab
FADER
-95
D.EFFECT
-96
PICT.EFFECT
-96
tab
REC MODE
a 80
BLT-IN ZOOM MIC
-96
MICREF LEVEL
-96
IMAGE SIZE
a
82
SELF-TIMER
-96
FLASH MODE**
a 83
* Items that are included also in the HOME
MENU
** DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Viewing items on the OPTION
MENU
Items * Page
tab
DELETE**
a 51
DELETE by date**
a 51
DELETE ALL**
a 51
tab
DIVIDE
a 58
ERASE**
a 60
ERASE ALL**
a 60
MOVE**
a 61
-- (A tab depends on the situation/No tab)
ADD**
a 59
ADD by date**
a 59
ADD ALL**
a 59
PRINT
a 64
SLIDE SHOW
-47
VOLUME
a 86
DATA CODE
a 84
SLIDE SHOW SET
-47
COPIES
-64
DATE/TIME
-64
SIZE
-64
DVD MENU
-69
* Items that are included also in the HOME
MENU
** These items are also available in the HOME
MENU, but with different item names.
92
Functions set in the OPTION MENU
Items you can set only on the OPTION
MENU will be described below.
The default settings are marked with B.
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1 Touch [MANUAL].
9 appears.
2 Touch (focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus. appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
3 Touch .
To adjust the focus automatically, touch
[AUTO] t in step 1.
b Notes
The minimum possible distance between the
camcorder and the subject while maintaining
sharp focus is about 1 cm (about 13/32 in.) for
wide angle and about 80 cm (about 2 5/8 feet)
for telephoto.
z Tips
It is easier to focus on the subject by moving the
power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle) to
adjust the zoom for recording. When you want
to record a subject at close range, move the
power zoom lever to W (wide angle), then
adjust the focus.
The focal distance information (the distance at
which the subject is focused on, for when it is
dark and hard to adjust focus) appears for a few
seconds in the following cases. (It will not be
displayed correctly if you are using a conversion
lens (optional).)
When the focus mode is switched from
automatic to manual.
When you set focus manually.
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
1 Touch the subject on the screen.
9 appears.
2 Touch [END].
To adjust the focus automatically, touch
[AUTO] t [
END] in step 1.
b Notes
If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
This is useful to record small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELE MACRO] to [ON]
( ), the zoom (p. 40) moves to the top of
the T (telephoto) side automatically and
allows recording subjects at a close
distance.
DCR-DVD110E/DVD115E/DVD610E
Down to about 43 cm (17 in.)
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Down to about 38 cm (15 in.)
To cancel, touch [OFF], or zoom to wide
angle (W side).
FOCUS
SPOT FOCUS
TELE MACRO
93
Customizing Your Camcorder
b Notes
When recording a distant subject, focusing may
be difficult and can take some time.
Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
You can fix the brightness of an image
manually. Adjust the brightness when the
subject is too bright or too dark relative to
the background.
1 Touch [MANUAL].
appears.
2 Adjust the exposure by touching /
.
3 Touch .
To return the setting to automatic exposure,
touch [AUTO] t in step 1.
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong
contrast between the subject and the
background, such as subjects in the
spotlight on stage.
1 Touch the point where you want to fix and
adjust the exposure on the screen.
appears.
2 Touch [END].
To return the setting to automatic exposure,
touch [AUTO] t [
END] in step 1.
b Notes
If you set [SPOT METER], [EXPOSURE] is
automatically set to [MANUAL].
You can record images effectively in
various situations with the [SCENE
SELECTION] function.
B AUTO
Select this to automatically record images
effectively without the [
SCENE
SELECTION
] function.
TWILIGHT* ()
Select this to take night view without
losing the mood.
CANDLE ( )
Select this to take scene without losing
candle mood.
SUNRISE&SUNSET* ()
Select this to reproduce the atmosphere of
scenes such as sunsets or sunrises.
FIREWORKS* ()
Select this to take spectacular shots of
fireworks.
EXPOSURE
SPOT METER (Flexible
spot meter)
SCENE SELECTION
Continued ,
94
Functions set in the OPTION MENU (Continued)
LANDSCAPE* ()
Select this to record distant subjects
clearly. This setting also prevents your
camcorder from focusing on glass or metal
mesh in windows that comes in between
the camcorder and the subject.
PORTRAIT ( )
Select this to bring out the subject such as
people or flowers while creating a soft
background.
SPOTLIGHT** ()
Select this to prevent people’s faces from
appearing excessively white when subjects
are lit by strong light.
SPORTS** (Sports lesson) ( )
Select this to minimize shake when
recording fast moving subjects.
BEACH** ()
Select this to take the vivid blue of the
ocean or a lake.
SNOW** ()
Select this to take bright pictures of a white
landscape.
* Your camcorder is set to focus only on distant
subjects.
** Your camcorder is set not to focus on nearby
subjects.
b Notes
The [WHITE BAL.] setting is cleared when you
set [SCENE SELECTION].
You can adjust the color balance to the
brightness of the recording environment.
B AUTO
The white balance is adjusted
automatically.
OUTDOOR ( )
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Outdoors
– Night views, neon signs and fireworks
– Sunrise or sunset
– Under daylight fluorescent lamps
INDOOR (n)
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Indoors
– At party scenes or studios where the lighting
conditions change quickly
– Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH ( )
The white balance will be adjusted
according to the ambient light.
1 Touch [ONE PUSH].
2 Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will record
the subject.
3 Touch [ ].
flashes quickly. When the white
balance is adjusted and stored in the
memory, the indicator stops flashing.
WHITE BAL. (White
balance)
95
Customizing Your Camcorder
b Notes
Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
When you select [ONE PUSH], keep framing
white object while is flashing quickly.
flashes slowly if [ONE PUSH] could not
be set.
When [ONE PUSH] was selected, if keeps
flashing after touching , set [WHITE
BAL.] to [AUTO].
If you set [WHITE BAL.], [SCENE
SELECTION] is automatically set to [AUTO].
z Tips
If you changed the battery pack, or moved your
camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
If you changed the [SCENE SELECTION]
setting or moved your camcorder to or from
outdoors during white balance setting with
[ONE PUSH], you need to repeat the [ONE
PUSH] operation.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
b Notes
Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot plus
recording if you set [S. NIGHTSHOT PLS]
to [ON] while the NIGHTSHOT PLUS
switch (p. 41) is also set to ON.
appears on the screen.
To return to the normal setting, set [S.
NIGHTSHOT PLS] to [OFF].
b Notes
Do not use [S. NIGHTSHOT PLS] in bright
places. This may cause a malfunction.
Do not cover the infrared port with your fingers
or other objects (p. 131).
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 92)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode, then touch .
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
cleared.
WHITE FADER
BLACK FADER
COLOR SLOW SHTR
(Color Slow Shutter)
S. NIGHTSHOT PLS
(Super NightShot plus)
FADER
STBY REC
Fading out Fading in
Continued ,
96
Functions set in the OPTION MENU (Continued)
When you set [OLD MOVIE], appears
and you can add an old movie effect to
images.
To cancel [D.EFFECT], touch [OFF].
You can add special effects to an image
during recording. appears.
B OFF
Does not use [PICT.EFFECT] setting.
SEPIA
Images appear in sepia.
B&W
Images appear in black and white.
PASTEL
Images appear as a pale pastel drawing.
When you set [BLT-IN ZOOM MIC] to
[ON] ( ), you can record sound with
directivity as you move the power zoom
lever. The default setting is [OFF].
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
B NORMAL
Records various surround sounds,
converting them into the certain level.
LOW ( )
Records surround sound faithfully. This
setting is not suitable for recording
conversations.
When you set [SELF-TIMER] to [ON],
appears on the screen.
When you press PHOTO, your camcorder
starts counting down, and records a still
image after about 10 seconds.
To cancel recording, touch [RESET].
To cancel the self-timer, select [OFF].
z Tips
You can also operate by pressing PHOTO on
the Remote Commander (DCR-DVD310E/
DVD410E/DVD710E/DVD810E) (p. 132).
D.EFFECT (Digital effect)
PICT.EFFECT (Picture
effect)
BLT-IN ZOOM MIC
MICREF LEVEL
SELF-TIMER
97
Performing with Your Computer
Performing with Your Computer
What you can do with Windows computer
When you install the “Picture Motion
Browser” on a Windows computer from the
supplied CD-ROM, you can enjoy the
following operations.
x Importing images taken with your
camcorder to a computer
x Viewing imported images on a
computer
x Creating a DVD
x Copying a disc
t Video Disc Copier
For details on the functions of “Picture
Motion Browser,” see “PMB Guide
(p. 99).
x Environment for using “Picture Motion
Browser”
OS: Microsoft Windows 2000 Professional
SP4/Windows XP SP2*/Windows Vista*
* 64-bit editions and Starter (Edition) are not
supported.
Standard installation is required.
Operation is not assured if the above OS has
been upgraded or in a multi-boot environment.
CPU: Intel Pentium III 1 GHz or faster
Application: DirectX 9.0c or later (This
product is based on DirectX technology. It
is necessary to have DirectX installed.)
Sound system: Direct Sound compatible
sound card
Memory: 256 MB or more
Hard disk: Disk volume required for
installation: Approximately 500 MB (5 GB
or more may be necessary when creating a
DVD.)
Display: Minimum 1,024 × 768 dots
Others: USB port (this must be
provided as standard), Hi-Speed USB (USB
2.0 compatible is recommended), DVD
burner (CD-ROM drive is necessary for
installation.)
b Notes
Your computer must meet hardware
requirements other than those described above
for each OS.
Even in a computer environment where the
operations are guaranteed, frames may be
dropped from movies, resulting in uneven
playback. However, imported images and
images on discs created subsequently will not be
affected.
Operations are not guaranteed on all the
recommended environments. For example, other
open or background applications running on
currently may limit product performance.
“Picture Motion Browser” does not support
5.1ch surround sound reproduction. The sound
is reproduced in 2ch sound.
x Using a Macintosh computer
The supplied software “Picture Motion
Browser” does not support a Macintosh
computer.
On the advanced use of images on your
camcorder connected to your Macintosh
computer, see the following URL:
http://guide.d-imaging.sony.co.jp/mac/
ms/us/
Installing the software
Continued ,
98
What you can do with Windows computer (Continued)
Depending on your computer, 8 cm media
(DVD+R DL, etc.) cannot be used.
If you use a Notebook PC, connect it to the AC
Adaptor as the power source. Otherwise, the
software will not work properly due to the
power saving function of the PC.
You can read images recorded on a “Memory
Stick PRO Duo” in a Memory Stick slot of a
computer. However, in the following cases, do
not use the Memory Stick slot of the computer,
but connect your camcorder to the computer
with the USB cable:
The computer is not compatible with a
“Memory Stick PRO Duo.”
A Memory Stick Duo adaptor is required.
A “Memory Stick PRO Duo” cannot be read
in the Memory Stick slot.
Reading data from the Memory Stick slot is
slow.
x Installation procedure
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first
time.
Contents to be installed and procedures
may differ depending on your OS.
1 Confirm that your camcorder is not
connected to the computer.
2 Turn on the computer.
b Notes
Log on as an Administrator for installation.
Close all applications running on the
computer before installing the software.
3 Place the supplied CD-ROM in the disc
drive of your computer.
The installation screen appears.
If the screen does not appear
4 Click [Install].
5 Select the language for the application to
be installed, then click [Next].
6 As the screen to confirm the connection
appears, connect your camcorder to the
computer following the steps below.
7 Click [Continue].
8 Read [License Agreement], select [I accept
the terms of the license agreement] if you
agree, then click [Next].
9 Confirm the installation settings, then click
[Install].
b Notes
Even if a screen prompting you to restart
your computer appears, you do not need to
restart it at this time. Restart your computer
after completing the installation.
It may take some time for the
authentication.
0 Follow the on-screen instructions to install
the software.
1 Click [Start], then click [My Computer].
(For Windows 2000, double-click [My
Computer].)
2 Double-click [SONYPICTUTIL (E:)]
(CD-ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
1 Connect the AC Adaptor to a wall outlet
(wall socket).
2 Turn on your camcorder.
3 Connect the (USB) jack (p. 129) of your
camcorder to the computer using the
supplied USB cable.
4 Touch [
USB CONNECT] on the
screen of your camcorder.
99
Performing with Your Computer
One of the following installation screens
appears, depending on the computer
environment. Check the screen and follow
the instructions displayed to install the
required software.
qa Restart the computer if required to
complete the installation.
qs Remove the CD-ROM from the disc drive
of your computer.
x Operating the Picture Motion Browser
To start “Picture Motion Browser,” click
[Start] - [All Programs] - [Sony Picture
Utility] - [PMB - Picture Motion
Browser].
The basic operation of “Picture Motion
Browser” is described on “PMB Guide.”
To view “PMB Guide,” click [Start] - [All
Programs] - [Sony Picture Utility] -
[Help] - [PMB Guide].
x Connecting your camcorder to a
computer
To connect your camcorder to a computer,
follow the steps below.
1 Connect the AC Adaptor to your camcorder
and a wall outlet (wall socket).
2 Turn on your camcorder.
3 Connect the (USB) jack (
p. 129) of your
camcorder to a computer using the supplied
USB cable.
The [USB SELECT] screen appears on
your camcorder. Touch the item you want
to operate on the screen.
z Tips
If the [USB SELECT] screen does not appear,
touch (HOME) t (OTHERS) t
[USB CONNECT].
Recommended USB cable connection
To assure the proper functioning of your
camcorder, connect your camcorder to a
computer as below.
Connect only the camcorder to the USB port of
your computer. Do not connect anything else to
other USB ports of a computer.
When connecting to a computer with a USB
keyboard and USB mouse connected as standard
equipment, connect the camcorder to another
USB port using the USB cable.
b Notes
Operations are not guaranteed when multiple
USB devices are connected to a computer.
Be sure to connect the USB cable to a USB port.
If the USB cable is connected to a computer via
a USB keyboard or USB hub, operations are not
guaranteed.
To disconnect the USB cable
1 Click the [Unplug or eject hardware] icon
on the task tray on the bottom right of the
desk top.
2 Click [Safely remove USB Mass Storage
Device].
3 Click [OK] (Windows 2000 only).
4 Touch [END] on the screen of your
camcorder.
5 Touch [YES] on the screen of your
camcorder.
– Sonic UDF Reader*
Software required to recognize a DVD-RW
(VR mode) disc
– Windows Media Format 9 Series Runtime
(Windows 2000 only)
Software required to create a DVD
– Microsoft DirectX 9.0c*
Software required to handle movies
* Windows 2000, Windows XP only
Continued ,
100
What you can do with Windows computer (Continued)
6 Disconnect the USB cable from the
camcorder and the computer.
b Notes
Do not disconnect the USB cable while the
ACCESS/access lamp is lit.
Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the media may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the
media.
101
Troubleshooting
Troubleshooting
Troubleshooting
If you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
Overall operations/Easy Handycam operation/
Remote Commander ................................... 101
Batteries/Power sources ............................. 102
LCD screen/Viewfinder.............................. 103
• Media ......................................................... 103
Recording ................................................... 104
Playing back images on your camcorder ... 106
Playing back a disc on other devices .......... 107
Playing back a “Memory Stick PRO Duo” on
other devices ............................................... 107
Editing images on your camcorder ............ 107
Connecting/Dubbing to other devices ....... 108
Connecting to a computer........................... 109
Functions that cannot be used simultaneously
.................................................................... 109
The power does not turn on.
Attach a charged battery pack to the
camcorder (p. 20).
Connect the plug of the AC Adaptor to the
wall outlet (wall socket) (p. 20).
The camcorder does not operate
even when the power is set to on.
It takes a few seconds for your camcorder to
be ready to record after the power is turned
on. This is not a malfunction.
Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
If the functions still do not work, press the
RESET button (p. 129) using a sharp-pointed
object. (If you press the RESET button, all
settings, including the clock setting, are
reset.)
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
Buttons do not work.
During Easy Handycam operation (p. 34),
the following buttons/functions are not
available.
Turning the LCD backlight on and off
(pressing and holding the DISP BATT/
INFO button for a few seconds) (p. 26)
. (BACK LIGHT) button (p. 41)
Playback zoom (p. 46)
DUBBING button (DCR-DVD410E/
DVD810E) (p. 55)
The (OPTION) button is not
displayed.
The OPTION MENU cannot be used during
Easy Handycam operation (p. 34).
The menu settings have been
changed automatically.
Most menu items automatically return to
their default settings during Easy Handycam
operation (p. 34).
The following menu items are fixed during
Easy Handycam operation:
Movie recording mode: [SP]
[DATA CODE]: [DATE/TIME]
Recording format for DVD-RW: [VIDEO]
The following menu items return to the
default settings if the POWER switch is set
to OFF (CHG) for more than 12 hours:
[DVD MENU]
[FOCUS]
[SPOT FOCUS]
[EXPOSURE]
[SPOT METER]
[SCENE SELECTION]
[WHITE BAL.]
[COLOR SLOW SHTR]
[S. NIGHTSHOT PLS],
[BLT-IN ZOOM MIC]
[MICREF LEVEL]
Overall operations/Easy
Handycam operation/Remote
Commander
Continued ,
102
Troubleshooting (Continued)
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
Following menu settings remain as they were
set even during Easy Handycam operation
(p. 34).
[MOVIE MEDIA SET]
[PHOTO MEDIA SET]*
1
[AUDIO MODE]*
2
[WIDE SELECT]
[SUB-T DATE]
[ INDEX SET]
[ IMAGE SIZE]
[FILE NO.]
[FLASH MODE]*
3
[ DISPLAY]
[VOLUME]
[BEEP]
[TV TYPE]
[CLOCK SET]
[AREA SET]
[SUMMERTIME]
[ LANGUAGE SET]
[DEMO MODE]
Your camcorder vibrates.
Vibration occurs depending on the condition
of the disc. This is not a malfunction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
This is not a malfunction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
Your camcorder is trying to recognize the
disc. This is not a malfunction.
Your camcorder gets warm.
This is because the power has been turned on
for a long time. This is not a malfunction.
Turn off your camcorder and leave it for a
while in a cool place.
The supplied Remote Commander
does not function (DCR-DVD310E/
DVD410E/DVD710E/DVD810E).
Set [REMOTE CTRL] to [ON] (p. 89).
Insert a battery into the battery case with the
+/– polarities correctly matching the +/–
marks (p. 132).
Remove any obstructions between the
Remote Commander and the remote sensor.
Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (DCR-DVD310E/
DVD410E/DVD710E/DVD810E).
Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
The power abruptly turns off.
When approximately 5 minutes have elapsed
while you do not operate your camcorder, the
camcorder is automatically turned off
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 89), or turn on the power
again, or use the AC Adaptor.
If the time set with [QUICK ON STBY]
(p. 89) has elapsed in sleep mode, your
camcorder turns off automatically. Turn on
your camcorder again.
Charge the battery pack (p. 20).
*
1
DCR-DVD410E/DVD810E
*
2
DCR-DVD115E/DVD310E/DVD410E/
DVD710E/DVD810E
*
3
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Batteries/Power sources
103
Troubleshooting
The CHG (charge) lamp does not
light while the battery pack is being
charged.
Turn the POWER switch to OFF (CHG)
(p. 20).
Attach the battery pack to the camcorder
correctly (p. 20).
Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
The battery charge is completed (p. 20).
The CHG (charge) lamp flashes while
the battery pack is being charged.
Attach the battery pack to the camcorder
correctly (p. 20). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
The ambient temperature is too high or too
low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 20).
The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
The ambient temperature is too high or low.
This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 20).
Menu items are grayed out.
You cannot select grayed items in the current
recording/playback situation.
There are some functions you cannot activate
simultaneously (p. 109).
The buttons do not appear on the
touch panel.
Touch the LCD screen lightly.
Press DISP/BATT INFO on your camcorder,
or DISPLAY on the Remote Commander
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E) (p. 26, 132).
The buttons on the touch panel do
not work correctly or do not work at
all.
Adjust the touch panel ([CALIBRATION],
p. 122).
The image in the viewfinder is not
clear.
Pull out the viewfinder, then move the
viewfinder lens adjustment lever until the
image appears clearly (p. 26).
The image in the viewfinder has
disappeared.
Close the LCD panel. No image is displayed
in the viewfinder when the LCD panel is
open (p. 26).
The disc cannot be removed.
Make sure the power source (battery pack or
AC Adaptor) is connected correctly (p. 20).
The disc is damaged or is dirty with
fingerprints, etc. In this case, it may take up
to 10 minutes to remove the disc.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
You turned off your camcorder during
finalizing the disc. Turn on your camcorder
and complete finalizing the disc (p. 67).
LCD screen/Viewfinder
Media
Continued ,
104
Troubleshooting (Continued)
Images recorded on a disc cannot be
deleted.
The maximum number of images that you
can delete on the INDEX screen at one time
is 100.
You cannot delete following movies (p. 51).
Movies recorded on DVD-R/DVD+R DL
Movies recorded on DVD-RW (VIDEO
mode) except the last recorded movie
Movies recorded on DVD+RW except the
last recorded movie
The indicators of the disc type and
the recording format on the LCD
screen are grayed out.
The disc may have been created on another
device. You can play back the disc with your
camcorder, but you cannot record additional
movies on the disc.
You inserted a disc that cannot be used with
your camcorder.
Your camcorder could not recognize the
disc.
You cannot operate functions using
the “Memory Stick PRO Duo.”
If you use a “Memory Stick PRO Duo
formatted on a computer, format it again on
your camcorder (p. 72).
You cannot delete images on the
“Memory Stick PRO Duo.”
The maximum number of images that you
can delete on the INDEX screen at one time
is 100.
You cannot delete images from the “Memory
Stick PRO Duo” if images are protected by
another device.
The data file name is not indicated
correctly or flashes.
The file is corrupted.
The file format is not supported by your
camcorder. Use the supported file format
(p. 118).
Refer also to “Media” (p. 103).
Pressing START/STOP or PHOTO
does not record images.
The playback screen is displayed. Set your
camcorder to recording standby (p. 39).
You cannot record images in sleep mode.
Cancel sleep mode by pressing QUICK ON
(p. 41).
Your camcorder is recording the image you
have just shot on the media.
The media has run out of space. Format the
media (internal memory (DCR-DVD410E/
DVD810E)/DVD-RW/DVD+RW/“Memory
Stick PRO Duo”) (p. 72). Delete unnecessary
images (p. 51), or use a new disc or
“Memory Stick PRO Duo.”
When you are using one of the following
discs after finalizing it, make the disc to be
able to record additional movies (p. 74). Or
use a new disc.
– DVD-RW (VIDEO mode)
–DVD+RW
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
Moisture condensation has occurred. Turn
off your camcorder and leave it for about 1
hour (p. 121).
The number of still images exceeds the
capacity of your camcorder (p. 83, 83).
Delete unnecessary images (p. 51).
You cannot record a still image.
You cannot record a still image on a disc on
your camcorder.
The ACCESS/access lamp lights up
even when you stop recording.
Your camcorder is recording the image you
have just record on the media.
Recording
105
Troubleshooting
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movie
is less than the expected recording
time of the media.
Depending on the conditions when recording
a fast moving object or so, the time available
for recording may shorten.
The recording stops.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
Moisture condensation has occurred. Turn
off your camcorder and leave it about 1 hour
(p. 121).
There is a time difference between
the point where you press START/
STOP and the point that movie
recording starts/stops.
On your camcorder, there may be a slight
time difference between the point where you
press START/STOP and the actual point that
movie recording starts/stops. This is not a
malfunction.
The movie aspect ratio (16:9/4:3)
cannot be changed.
You cannot change the movie aspect ratio in
the following cases.
When [DISC] is selected on [MOVIE
MEDIA SET], you inserted a DVD+RW,
or no disc is inserted.
When [MEMORY STICK] is selected on
[MOVIE MEDIA SET], no “Memory
Stick PRO Duo” is inserted.
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 92).
The recording conditions are not suitable for
auto focus. Adjust the focus manually
(p. 92).
[STEADYSHOT] does not function.
Set [STEADYSHOT] to [ON] (p. 81).
[STEADYSHOT] may not be able to
compensate for excessive vibrations.
Tiny spots in white, red, blue, or
green appear on the screen.
The spots appear when you are recording
with [S. NIGHTSHOT PLS] or [COLOR
SLOW SHTR]. This is not a malfunction.
The color of the image is not
correctly displayed.
Set the NIGHTSHOT PLUS switch to OFF
(p. 41).
The screen image is bright, and the
subject does not appear on the
screen.
Set the NIGHTSHOT PLUS switch to OFF
(p. 41).
The screen image is dark, and the
subject does not appear on the
screen (DCR-DVD310E/DVD410E/
DVD710E/DVD810E).
Press and hold DISP/BATT INFO for a few
seconds to turn on the backlight (p. 26).
Undesirable flicker occurs.
This occurs when recording images under a
fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction.
A vertical band appears when
recording candlelight or electric light
in the dark.
This occurs when the contrast between the
subject and the background is too high.
This is not a malfunction.
Continued ,
106
Troubleshooting (Continued)
A vertical white line appears on an
image taken in bright light.
This phenomenon is called the smear effect.
This is not a malfunction.
Black bands appear when you
record a TV screen or computer
screen.
Set [STEADYSHOT] to [OFF] (p. 81).
[S. NIGHTSHOT PLS] cannot be
operated.
Set the NIGHTSHOT PLUS switch to ON
(p. 41).
[COLOR SLOW SHTR] does not
operate correctly.
[COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
plus or [S. NIGHTSHOT PLS].
You cannot adjust [LCD BL LEVEL].
You cannot adjust [LCD BL LEVEL] when:
– The LCD panel is closed on your
camcorder with the LCD screen facing out.
– The power is supplied from the AC
Adaptor.
You cannot find the images to be
played back.
Select the media to be played back by
touching (HOME) t (MANAGE
MEDIA) t [MOVIE MEDIA SET] or
[PHOTO MEDIA SET] (p. 28).
You cannot play back a disc.
Check out the disc compatibility (p. 12).
Insert a disc with the recording side facing
your camcorder (p. 30).
The disc that was recorded, formatted, or
finalized on other devices may not be played
back on your camcorder.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The playback image is distorted.
Clean the disc using a soft cloth (p. 118).
Images stored on a “Memory Stick
PRO Duo” cannot be played back.
Images cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes
when viewing the still image.) This is not a
malfunction (p. 119).
Images recorded on other devices may
neither be played back, nor displayed in
actual size. This is not a malfunction
(p. 119).
” is indicated on an image in the
VISUAL INDEX screen.
Loading of the data may have failed. It may
be indicated correctly when you turn off the
power and then turn it on again, or repeat
removing and inserting the “Memory Stick
PRO Duo” a couple of times.
You removed the battery pack or the AC
Adaptor while the access lamp is flashing.
This operation may damage the image data,
which will be marked with .
This may appear on still images recorded on
other devices, edited on a computer, etc.
” is indicated on an image in the
VISUAL INDEX screen.
Perform [REPAIR IMG.DB F.] (p. 76). If it
still appears, delete the image marked with
(p. 51).
No sound or only a quiet sound is
heard during playback.
Turn up the volume (p. 45).
Playing back images on your
camcorder
107
Troubleshooting
Sound is not output when the LCD screen is
closed. Open the LCD screen.
When you record sound with [MICREF
LEVEL] set to [LOW] (p. 96), the recorded
sound may be difficult to hear.
You cannot play back the disc, or the
disc is not recognized.
Clean the disc using a soft cloth (p. 118).
Finalize the disc (p. 67).
A disc recorded in VR mode cannot be
played back on a device that does not support
VR mode. Check the compatibility in the
instruction manual of the playback device.
The playback image is distorted.
Clean the disc using a soft cloth (p. 118).
” is indicated on an image in the
DVD menu.
Loading of the data may have failed while
finalizing the disc. For the following discs,
make the disc capable of additional
recording (p. 74), then remake the DVD
menu by finalizing the disc again (p. 67).
The DVD menu may be displayed correctly.
DVD-RW (VIDEO mode)
DVD+RW
Playback freezes for an instant
between the scenes.
The image may freeze for an instant between
scenes depending on the device being used.
This is not a malfunction.
In the case of a DVD+R DL, the image may
freeze for an instant when the recording layer
changes. This is not a malfunction.
Playback does not move to the
previous scene when you press
..
If playback crosses 2 titles made
automatically by your camcorder when .
is pressed, playback may not move to the
previous scene. Select the desired scene from
the menu screen. Refer to the instruction
manual of the playback device for further
information.
When you play the disc on a
computer or another playback
device, the left and right sounds are
heard out of balance (DCR-DVD115E/
DVD310E/DVD410E/DVD710E/
DVD810E).
This may happen when sound recorded with
5.1ch surround is converted to 2ch (normal
stereo sound) on a computer or another
playback device (p. 40). This is not a
malfunction.
If the playback device is a 2ch stereo system,
change the audio conversion system
(downmix system). For details, refer to the
instruction manuals of the playback device.
When you create a disc using the supplied
“Picture Motion Browser” software, select
2ch for the audio setting.
Record movies with [AUDIO MODE] set to
[2ch STEREO] on your camcorder (p. 80).
You cannot play back the “Memory
Stick PRO Duo,” or the “Memory
Stick PRO Duo” is not recognized.
The device may not support a “Memory
Stick PRO Duo.”
Unable to edit.
Select a media to be edited by touching
(HOME) t (MANAGE MEDIA)
t [MOVIE MEDIA SET] or [PHOTO
MEDIA SET] (p. 28).
You cannot edit movies recorded on DVD-
R/DVD+R DL (p. 12).
There are no images recorded.
Playing back a disc on other
devices
Playing back a “Memory Stick
PRO Duo” on other devices
Editing images on your
camcorder
Continued ,
108
Troubleshooting (Continued)
Unable to edit because of the condition of the
image.
You cannot edit an image protected on
another device.
You cannot dub movies from a disc to the
internal memory (DCR-DVD410E/
DVD810E) or a “Memory Stick PRO Duo.”
Movies cannot be added in the
Playlist.
The media is full.
To a Playlist, you can add 99 movies on the
internal memory (DCR-DVD410E/
DVD810E) or a “Memory Stick PRO Duo,”
or 999 movies on a disc (p. 59). Delete
unnecessary images (p. 51).
You cannot add still images in the Playlist.
Movies cannot be divided.
A movie that is too short cannot be divided.
A movie protected on another device cannot
be divided.
Images cannot be deleted.
You cannot delete following movies (p. 51).
Movies recorded on DVD-R/DVD+R DL
Movies recorded on DVD-RW (VIDEO
mode) except the last recorded movie
Movies recorded on DVD+RW except the
last recorded movie
In the case of disc, you cannot delete movies
during Easy Handycam operation (p. 34).
Images protected on another device cannot
be deleted.
Unable to capture a still image from
a movie.
There is not enough free space on the media
for saving still images (p. 53).
Unable to finalize.
Use the AC Adaptor for finalizing operation.
Do not use the battery pack.
The disc has already been finalized. In the
case of following discs, follow the required
procedure to record additional movies
(p. 74):
– DVD-RW (VIDEO mode)
–DVD+RW
Unable to [UNFINALIZE].
[UNFINALIZE] is not available for the
following discs:
– DVD-RW (VR mode)
–DVD+RW
–DVD-R
–DVD+R DL
You cannot edit or record additional
images on a disc using other
devices.
You may not be able to edit or record
additional images on a disc recorded on your
camcorder using other devices.
You cannot hear the sound on the TV
connected to your camcorder.
This is because only the S VIDEO plug is
connected. Make sure that you connect also
the red and white plugs of the A/V
connecting cable with S VIDEO (optional)
(p. 62).
The aspect ratio of the image is not
correct on the 4:3 TV connected to
your camcorder.
Set [TV TYPE] depending on your TV
(p. 48).
You cannot dub.
The A/V connecting cable is not connected
properly. Make sure that the A/V connecting
cable is connected to the proper jack, i.e. to
the input jack of another device for dubbing
a movie from your camcorder (p. 55).
Connecting/Dubbing to other
devices
109
Troubleshooting
You cannot install “Picture Motion
Browser.”
Check the computer environment required to
install “Picture Motion Browser.”
Install “Picture Motion Browser” in an
orderly manner (p. 98).
“Picture Motion Browser” does not
work correctly.
Finish “Picture Motion Browser” and restart
your computer.
Your camcorder is not recognized by
the computer.
Install “Picture Motion Browser” (p. 98).
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the
computer and your camcorder, and restart the
computer, then connect the computer and
your camcorder again in an orderly manner
(p. 99).
Make sure the media check tool of the
computer activates. For details on the media
check tool, see “PMB Guide.”
The following list shows examples of
unworkable combinations of functions and
menu items.
Connecting to a computer
Functions that cannot be used
simultaneously
Cannot use
Because of following
settings
BACK LIGHT [SPOT METER],
[FIREWORKS],
[MANUAL] in
[EXPOSURE]
[WIDE
SELECT]
[OLD MOVIE]
[AUTO SLW
SHUTTR]
[S. NIGHTSHOT PLS],
[SCENE SELECTION],
[COLOR SLOW
SHTR], [D.EFFECT],
[FADER]
[SPOT FOCUS] [SCENE SELECTION]
[TELE MACRO] [SCENE SELECTION]
[EXPOSURE] NightShot plus,
[S. NIGHTSHOT PLS]
[SPOT METER] NightShot plus,
[S. NIGHTSHOT PLS]
[SCENE
SELECTION]
NightShot plus,
[S. NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [OLD MOVIE],
[TELE MACRO],
[FADER]
[WHITE BAL.] NightShot plus,
[S. NIGHTSHOT PLS]
[COLOR SLOW
SHTR]
NightShot plus,
[D.EFFECT], [SCENE
SELECTION],
[FADER]
[S. NIGHTSHOT
PLS]
[D.EFFECT], [FADER]
[FADER] [D.EFFECT], [S.
NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [CANDLE]/
[FIREWORKS] in
[SCENE SELECTION]
[D.EFFECT] [S. NIGHTSHOT PLS],
[COLOR SLOW
SHTR], [FADER],
[SCENE SELECTION],
[PICT.EFFECT]
[PICT.EFFECT] [OLD MOVIE]
[MICREF
LEVEL]
[BLT-IN ZOOM MIC]
Cannot use
Because of following
settings
110
Warning indicators and messages
If indicators appear on the LCD screen or in
the viewfinder, check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have tried
a couple of times, contact your Sony dealer
or local authorized Sony service facility.
C: (or E:) ss:ss (Self-diagnosis
display)
C:04:ss
The battery pack is not an
“InfoLITHIUM” H series battery pack.
Use an “InfoLITHIUM” H series
battery pack (p. 119).
Connect the DC plug of the AC
Adaptor to the DC IN jack of your
camcorder securely (p. 20).
C:13:ss
The disc is faulty. Use a compatible
disc with your camcorder (p. 12).
The disc is dirty or has scratches on it.
Clean the disc with a cleaning cloth
(p. 118).
C:32:ss
Symptoms that are not described above
have occurred. Remove the disc and
insert it again, then operate your
camcorder again.
Remove the power source. Reconnect it
again and operate your camcorder
again.
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E.”
101-0001 (Warning indicator
pertaining to files)
Slow flashing
The file is damaged.
The file is unreadable.
(Warning indicator pertaining to
discs)
Slow flashing
A disc is not inserted.*
Less than 5 minutes remains for
recording movies.
A disc that cannot be read or written is
inserted, such as the single-sided disc
inserted inside out.
Fast flashing
Your camcorder cannot recognize the
disc.*
A finalized disc is inserted into your
camcorder during recording standby.
The disc is fully recorded.*
The disc recorded in the different TV
color system from your camcorder is
inserted when (Movie) is selected.*
Z (You need to remove the disc)*
Fast flashing
Your camcorder cannot recognize the
disc.
The disc is fully recorded.
An error might have occurred with the
disc drive in your camcorder.
A finalized disc is inserted during
recording standby (p. 74).
Self-diagnosis display/Warning
indicators
C:04:00
111
Troubleshooting
E (Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing*
The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Warning indicator pertaining to
“Memory Stick PRO Duo”)
Slow flashing
There is not enough free space for
recording. See page 5 for the type of
“Memory Stick PRO Duo” you can use
in your camcorder.
No “Memory Stick PRO Duo” is
inserted (p. 32).
Fast flashing*
There is no free space for recording.
Delete unnecessary images (p. 51), or
format the “Memory Stick PRO Duo”
(p. 72) after dubbing/copying images
(p. 55, 62, 97).
The image database file is broken (p.
76).
(Warning indicators pertaining to
“Memory Stick PRO Duo”
formatting)*
The “Memory Stick PRO Duo” is
damaged.
The “Memory Stick PRO Duo” is not
formatted correctly (p. 72, 118).
(Warning indicator pertaining to
incompatible “Memory Stick PRO
Duo”)*
An incompatible “Memory Stick PRO
Duo” is inserted (
p. 118).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick PRO Duo”)*
Access to the “Memory Stick PRO
Duo” was restricted on another device.
(Warning indicator pertaining to
camera-shake warning)
The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
(Warning indicator pertaining to
still image recording)
The camcorder cannot record a still
image at the moment, because the
camcorder is processing the still image
just recorded. Wait until the camcorder
is ready for recording.
* You hear a melody when the warning indicators
appear on the screen (p. 86).
Continued ,
112
Warning indicators and messages (Continued)
If messages appear on the screen, follow the
instructions.
x Media
Internal memory format error.
The format of the internal memory of
your camcorder has been changed from
the default format. You may be able to
use the internal memory again after
formatting it (p. 72). All the data in the
internal memory will be deleted.
ZRecording on disc disabled.
A malfunction has occurred with the
disc and the disc cannot be used.
Playback prohibited.
You are trying to play back an
incompatible disc with your camcorder.
You are trying to play back an image
recorded with a copyright protection
signal.
Z Need to unfinalize disc.
To record on the finalized DVD-RW
(VIDEO mode), unfinalize it (p. 74).
Disc error. Remove disc.
Your camcorder cannot recognize the
disc, because the disc is incompatible
or has scratches.
Z Disc error. Unsupported
format.
The disc is recorded in the different
format code from your camcorder.
Formatting the disc may enable you to
use the disc on your camcorder (DVD-
RW/DVD+RW only) (p. 72).
Reinsert the Memory Stick.
Reinsert the “Memory Stick PRO Duo
a few times. If even then the indicator
flashes, the “Memory Stick PRO Duo”
could be damaged. Try with another
“Memory Stick PRO Duo.”
This Memory Stick is not
formatted correctly.
Check the format, then format the
“Memory Stick PRO Duo” with your
camcorder if necessary (p. 72).
Memory Stick folders are full.
You cannot create folders exceeding
999MSDCF. You cannot create or
delete created folders using your
camcorder.
Format the “Memory Stick PRO Duo”
(p. 72), or delete unnecessary folders
using your computer.
This Memory Stick may not be able
to record or play movies.
Use the recommended “Memory Stick”
(p. 5).
This Memory Stick may not be able
to record or play images correctly.
There may be something wrong with
the “Memory Stick PRO Duo.” Insert
the “Memory Stick PRO Duo” again.
Do not eject the Memory Stick during
writing. Data may be damaged.
Insert the “Memory Stick PRO Duo”
again, and follow the instructions on
the screen.
The Image Database File is
damaged. Do you want to create a
new file?
The image database file is damaged.
When you touch [YES], a new image
Description of warning
messages
113
Troubleshooting
database file is created. The old
recorded images on the “Memory Stick
PRO Duo” cannot be played back
(Image files are not damaged). If you
perform [REPAIR IMG.DB F.] (p. 76)
after creating new image database file,
playing back the old recorded images
may become possible. If it does not
work, copy the image to a computer
using the supplied software.
Inconsistencies found in Image
Database File. Movies cannot be
recorded or played. Do you want to
repair the Image Database File?
The image database file is damaged.
Touch [YES] to repair.
x PictBridge compliant printer
Not connected to PictBridge
compatible printer.
Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
Cannot print. Check the printer.
Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
x Others
No further selection is possible.
To a Playlist, you can add 99 movies on
the internal memory (DCR-DVD410E/
DVD810E) or a “Memory Stick PRO
Duo,” or 999 movies on a disc (p. 59).
The maximum number of images that
you can select on the INDEX screen at
one time is 100 when:
deleting images
dubbing movies
copying still images
editing a Playlist
printing still images
Data protected.
The image has been protected with
another device. Cancel the protection
on the device.
Cannot divide.
You cannot divide a movie that is
extremely short.
Cannot recover data.
Writing data to the media has failed.
Attempts were made to recover the
data, but they were unsuccessful.
Please wait.
This is displayed if the disc removal
process takes time. Turn on the
camcorder and leave it for about 10
minutes, preventing vibration.
114
Additional Information
Using your camcorder abroad
Power supply
You can use your camcorder in any
countries/regions using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50/60 Hz range.
On TV color systems
Your camcorder is a PAL-system-based
camcorder. If you want to view the
playback image on a TV, it must be a PAL-
system-based TV with an AUDIO/VIDEO
input jack.
System Used in
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia, New
Zealand, Norway, Poland,
Portugal, Singapore, Slovak
Republic, Spain, Sweden,
Switzerland, Thailand, United
Kingdom, etc.
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay
NTSC
Bahama Islands, Bolivia,
Canada, Central America,
Chile, Colombia, Ecuador,
Guyana, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
SECAM
Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
115
Additional Information
Setting to the local time
You can easily set the clock to the local time by setting a time difference when using your
camcorder abroad. Touch (HOME) t (SETTINGS) t [CLOCK/ LANG] t
[AREA SET] and [SUMMERTIME] (p. 88).
World time difference
Time-zone
differences
Area setting
GMT Lisbon, London
+01:00 Berlin, Paris
+02:00 Helsinki, Cairo, Istanbul
+03:00 Moscow, Nairobi
+03:30 Tehran
+04:00 Abu Dhabi, Baku
+04:30 Kabul
+05:00 Karachi, Islamabad
+05:30 Calcutta, New Delhi
+06:00 Almaty, Dhaka
+06:30 Rangoon
+07:00 Bangkok, Jakarta
+08:00 Hong Kong, Singapore, Beijing
+09:00 Seoul, Tokyo
+09:30 Adelaide, Darwin
+10:00 Melbourne, Sydney
+11:00 Solomon Is.
+12:00 Fiji, Wellington
–12:00 Eniwetok, Kwajalein
–11:00 Midway Is., Samoa
–10:00 Hawaii
–09:00 Alaska
–08:00 Los Angeles, Tijuana
–07:00 Denver, Arizona
–06:00 Chicago, Mexico City
–05:00 New York, Bogota
–04:00 Santiago
–03:30 St. John’s
–03:00 Brasilia, Montevideo
–02:00 Fernando de Noronha
–01:00 Azores, Cape Verde Is.
Time-zone
differences
Area setting
116
File/folder structure on the internal memory
(DCR-DVD410E/DVD810E) and a “Memory Stick
PRO Duo
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back images on the camcorder. To enjoy still images
or movies by connecting to a computer, see “PMB Guide” on the supplied CD-ROM, then use
the supplied application.
A Image database files
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files
and not usually displayed.
B Movie files (MPEG2 files)
The extension of the files is “.MPG”.
The maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the capacity of a file number
exceeds 9,999, another folder is created
to record new movie files.
The folder name goes up: [101PNV01]
t [102PNV01]
C Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
the capacity of a file number exceeds
9,999, another folder is created to store
new image files.
The folder name goes up: [101MSDCF]
t [102MSDCF]
You can access the media in the camcorder from
a computer connected by the USB cable (p. 99).
Do not modify the files or folders in the
camcorder from a computer. The image files
may be destroyed or may not be played back.
We (Sony) will not be responsible for the results
of operating the data on the media in the
camcorder from a computer.
When you delete image files, follow the steps on
page 51. Do not delete the image files on the
media in the camcorder directly from a
computer.
Do not format the media in the camcorder using
a computer. The camcorder may not operate
correctly.
Do not copy the files on a “Memory Stick PRO
Duo” in the camcorder from a computer. We
(Sony) will not be responsible for the results of
this kind of operation.
* Internal memory only (DCR-DVD410E/DVD810E)
117
Additional Information
Maintenance and precautions
See page 12 for the details of discs
which you can use with your
camcorder.
Notes on use
Hold the disc by its edge while supporting the
center hole lightly. Do not touch the recording
side (the opposite of the printed side when using
a single-sided disc).
Before shooting, be sure to remove dust and
fingerprints from the disc with a soft cloth.
Otherwise you may not be able to record or play
normally in some situations using that disc.
When you set the disc in your camcorder, press
firmly until it clicks. When the message
[C:13:ss] appears on the LCD screen, open
the disc cover and set the disc again.
Do not attach any adhesive material such as a
sticker on the surface of a disc. If you do so, the
disc may become unbalanced, and this may
cause a malfunction of the disc or your
camcorder.
Use of double-sided discs
Double-sided discs allow you to record both sides
of a disc.
x Recording on the A side
Place the disc in your camcorder with the
side with the symbol at the center facing
outwards until it clicks.
When using a double-sided disc, take care not to
smudge the surface with fingerprints.
When a double-sided disc is used in your
camcorder, recording/playback are performed
on that side only. You cannot switch to record
on or play back the other side with the disc set to
the camcorder. When recording/playback of one
side is complete, remove the disc and turn it
over to access the other side.
Perform the following operations on each side
of a double-sided disc:
Finalizing (p. 67)
Formatting (p. 72)
Unfinalizing (p. 74)
About the disc
symbol
Place the symbol facing outwards.
Recording is made on the rear side.
Continued ,
118
Maintenance and precautions (Continued)
Care and storage of the discs
Keep the disc clean, or the image quality of the
audio and video output may deteriorate.
Clean the disc with a soft cloth.
Wipe the disc from the center out. For dirt, clean
the disc with a soft cloth slightly moistened in
water, then remove the moisture with a soft, dry
cloth. Do not use solvents such as benzine,
cleaners intended for vinyl LPs or antistatic
spray, as they may cause a malfunction to the
disc.
Do not expose the disc to direct sunlight or
leave it in a humid place.
When you carry or store the disc, put it in its
case.
When you want to write letters or marks, etc. on
a single-sided disc, write only on the printed
side using an oil-based marker with a felt-tip,
and do not touch the ink until it dries. Do not
heat the disc or use a sharp-pointed tool, such as
ball point pen. Do not dry the surface by
heating. You cannot write, or mark, on double-
sided discs.
A “Memory Stick” is a compact, portable
IC recording medium with a large data
capacity.
You can use only a “Memory Stick Duo,”
which is about the half size of a standard
“Memory Stick,” with your camcorder.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” on your camcorder.
This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
This product is compatible with “Memory Stick
Micro” (“M2”). “M2” is the abbreviation for the
“Memory Stick Micro.”
A “Memory Stick PRO Duo” formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
Data read/write speed may vary depending on
the combination of the “Memory Stick PRO
Duo” and the “Memory Stick PRO Duo”
compliant product you use.
Damaged or lost data may occur in the
following cases (the data will not be
compensated for):
If you eject the “Memory Stick PRO Duo,” or
turn off your camcorder while your camcorder
is reading or writing image files on the
“Memory Stick PRO Duo” (while the access
lamp is lit or flashing).
If you use the “Memory Stick PRO Duo” near
magnets or magnetic fields.
It is recommended you make a back-up of
important data on the hard disk of a computer.
Be careful not to apply excessive force when
writing on a memo area on a “Memory Stick
PRO Duo.”
Do not attach a label or the like on a “Memory
Stick PRO Duo” or a Memory Stick Duo
adaptor.
When you carry or store a “Memory Stick PRO
Duo,” put it in its case.
Do not touch, or allow metallic objects to come
into contact with the terminals.
Do not bend, drop or apply strong force to the
“Memory Stick PRO Duo.”
Do not disassemble or modify the “Memory
Stick PRO Duo.”
Do not let the “Memory Stick PRO Duo” get
wet.
Keep the “Memory Stick PRO Duo” out of the
reach of small children. They might accidentally
swallow it.
About the “Memory Stick”
Types of “Memory Stick”
Recording/
Playback
“Memory Stick Duo”
(with MagicGate)
-
“Memory Stick PRO Duo a
“Memory Stick PRO-HG Duo” a*
* Your camcorder is not compatible with 8-bit
parallel data transfer, but performs 4-bit parallel
data transfer, which is used by a “Memory Stick
PRO Duo.”
119
Additional Information
Do not insert anything other than a “Memory
Stick PRO Duo” into the Memory Stick Duo
slot. Doing so may cause a malfunction.
Do not use or keep the “Memory Stick PRO
Duo” in the following locations:
Places subject to extremely high temperature,
such as a car parked outside in the summer
Places under direct sunlight
Places with extremely high humidity or
subject to corrosive gases
x On the Memory Stick Duo adaptor
When using a “Memory Stick PRO Duo” with a
“Memory Stick” compliant device, be sure to
insert the “Memory Stick PRO Duo” into a
Memory Stick Duo adaptor.
When inserting a “Memory Stick PRO Duo”
into a Memory Stick Duo adaptor, make sure the
“Memory Stick PRO Duo” is inserted facing in
the correct direction, then insert it all the way in.
Note that improper use may cause a
malfunction. Also, if you force the “Memory
Stick PRO Duo” into the Memory Stick Duo
adaptor in the wrong direction, the “Memory
Stick PRO Duo” may be damaged.
Do not insert a Memory Stick Duo adaptor
without a “Memory Stick PRO Duo” attached
into a “Memory Stick” compliant device. Doing
so may result in malfunctions of the device.
x On a “Memory Stick PRO Duo”
Up to 8 GB of “Memory Stick PRO Duo” and
“Memory Stick PRO-HG Duo” are confirmed to
be able to be used with your camcorder.
Notes on using “Memory Stick Micro”
To use a “Memory Stick Micro” with your
camcorder, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” into the Duo-
sized M2 Adaptor, and then insert the adaptor
into the Memory Stick Duo slot. If you insert a
“Memory Stick Micro” into your camcorder
without using a Duo-sized M2 Adaptor, you
might not be able to remove it from your
camcorder.
Keep the “Memory Stick Micro” out of the
reach of small children. They might accidentally
swallow it.
On image data compatibility
Image data files recorded on a “Memory Stick
PRO Duo” by your camcorder conform to the
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
If you cannot use a “Memory Stick PRO Duo”
that has been used with another device, format it
with your camcorder (p. 72). Note that
formatting erases all information on the
“Memory Stick PRO Duo.”
You may not be able to play back images with
your camcorder:
if image data are modified on a computer.
if image data are recorded with other devices.
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
“InfoLITHIUM” H series battery packs
have the mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/charger, the remaining
battery time and charging time appear.
About the “InfoLITHIUM
battery pack
Continued ,
120
Maintenance and precautions (Continued)
To charge the battery pack
Be sure to charge the battery pack before you
start using your camcorder.
We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
After charging is complete, disconnect the AC
Adaptor from the DC IN jack on your
camcorder or remove the battery pack.
To use the battery pack effectively
Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
followings to use the battery pack for a longer
time.
Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
Use a large capacity battery pack: NP-FH70/
NP-FH100 (optional).
Frequent use of the LCD screen or a frequent
playback, fast forward or reverse operation
wears out the battery pack faster.
We recommend using a large capacity battery
pack: NP-FH70/NP-FH100 (optional).
Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consumed when your camcorder is in recording
standby or playback pause.
Have spare battery packs ready for 2 or 3 times
the expected recording time, and make trial
recordings.
Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
The E mark that indicates low battery flashes
even if there are still 20 minutes of battery time
remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
To discharge the battery pack on your
camcorder completely, touch (HOME) t
(SETTINGS) t [GENERAL SET] t
[A.SHUT OFF] t [NEVER] and leave your
camcorder in recording standby until the power
goes off (p. 89).
About battery life
Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
Each battery’s life is governed by storage,
operating and environmental conditions.
121
Additional Information
On use and care
Do not use or store the camcorder and
accessories in the following locations:
Anywhere extremely hot, cold, or humid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in the
sun. They may malfunction or become
deformed.
Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
Near strong radio waves or radiation.
The camcorder may not be able to record
properly.
Near AM receivers and video equipment.
Noise may occur.
On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories
recommended in these operating instructions.
Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
When disconnecting the power cord (mains
lead), pull it by the plug and not the cord.
Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
Keep metal contacts clean.
Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately (DCR-DVD310E/DVD410E/
DVD710E/DVD810E).
If the battery electrolytic liquid has leaked:
consult your local authorized Sony service
facility.
wash off any liquid that may have contacted
your skin.
if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x When not using your camcorder for a
long time
Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
Remove a disc from your camcorder.
Use up the battery pack completely before
storing it.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder, on the
surface of the disc, or on the pickup lens.
This may cause a malfunction to your
camcorder.
x If moisture condensation has occurred
Leave your camcorder for about 1 hour
without turning it on.
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as
follows:
You bring your camcorder from a ski slope into
a place warmed up by a heating device.
You bring your camcorder from an air
conditioned car or room into a hot place outside.
You use your camcorder after a squall or a
shower.
About handling of your
camcorder
Continued ,
122
Maintenance and precautions (Continued)
You use your camcorder in a hot and humid
place.
x How to prevent moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the ambient temperature after about
1 hour.
LCD screen
Do not exert excessive pressure on the LCD
screen, as it may cause damage.
If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
x To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
x On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor during the operation.
1 Turn on your camcorder.
2 Touch (HOME) t (SETTINGS)
t [GENERAL SET] t
[CALIBRATION].
3 Touch “×” displayed on the screen 3 times
with the corner of a “Memory Stick PRO
Duo” or the like. The position of “×”
changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the
calibration again.
b Notes
Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
You cannot calibrate the LCD screen if it is
rotated, or closed with the screen facing out.
On handling the casing
If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the
finish:
Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen
Handling the camcorder with above
substances on your hands
Leaving the casing in contact with rubber or
vinyl objects for a long period of time
123
Additional Information
On the pickup lens
Do not touch the lens inside the disc cover.
Keep the disc cover closed except when
inserting and removing the disc, to keep dust
out.
When your camcorder does not work because
the pickup lens is dirty, clean it with a camera
blower (optional). Do not touch the pickup lens
directly during cleaning, because this may cause
the camcorder to malfunction.
About care and storage of the lens
Wipe the surface of the lens clean with a soft
cloth in the following instances:
When there are fingerprints on the lens
surface.
In hot or humid locations
When the lens is exposed to salty air such as
at the seaside.
Store in a well-ventilated location subject to
little dirt or dust.
To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
Cleaning inside the viewfinder
Remove any dust from inside the
viewfinder by following the steps below.
1 Pull out the viewfinder.
2 While pushing in the tab on the bottom of
the viewfinder with a fine-tipped object
such as a ball point pen, pull the eyecup
block in the direction of the arrow to
remove.
3 Remove dust from the eyecup block with a
camera blower, etc.
4 Press the viewfinder onto the body of the
camcorder.
5 Remove dust from the inside area where
the eyecup block was attached with a
camera blower, etc.
6 Attach the eyecup block to the viewfinder,
pushing it straight on until it clicks.
b Notes
The eyecup block is a precision part. Do not
disassemble it further.
Do not touch the lens of the eyecup block.
Pickup lens
Continued ,
124
Maintenance and precautions (Continued)
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF (CHG). The pre-
installed rechargeable battery is always
charged while your camcorder is connected
to the wall outlet (wall socket) via the AC
Adaptor or while the battery pack is
attached. The pre-installed rechargeable
battery will be fully discharged in about 3
months if you do not use your camcorder
at all. Use your camcorder after charging
the pre-installed rechargeable battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor, and leave it with the POWER
switch set to OFF (CHG) for more than 24
hours.
125
Additional Information
Specifications
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format
DCR-DVD110E/DVD610E
Dolby Digital 2ch
Dolby Digital Stereo Creator
DCR-DVD115E/DVD310E/DVD410E/
DVD710E/DVD810E
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Video signal
PAL color, CCIR standards
Internal memory (DCR-DVD410E/
DVD810E)
8GB
When measuring media capacity, 1 GB equals
1 billion bytes, a portion of which is used for
data management.
Usable discs
8 cm DVD-RW/DVD+RW/DVD-R/
DVD+R DL
Movie recording format
Internal memory (DCR-DVD410E/
DVD810E)
MPEG2-PS
Disc
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording (VR mode)
DVD+RW: DVD+RW Video
DVD-R/DVD+R DL: DVD-VIDEO
Memory Stick PRO Duo
MPEG2-PS
Still image recording format
Exif Ver.2.2*
Viewfinder
Electric viewfinder (color)
Image device
DCR-DVD110E/DVD115E/DVD610E
2.25 mm (1/8 type) CCD (Charge Coupled
Device)
Gross:
Approx. 800 000 pixels
Effective (Movie, 16:9)
Approx. 490 000 pixels
Effective (Still, 16:9)
Approx. 310 000 pixels
Effective (Still, 4:3)
Approx. 410 000 pixels
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
3 mm (1/6 type) CCD (Charge Coupled
Device)
Gross:
Approx. 1 070 000 pixels
Effective (Movie, 16:9)
Approx. 670 000 pixels
Effective (Still, 16:9)
Approx. 750 000 pixels
Effective (Still, 4:3)
Approx. 1 000 000 pixels
Lens
Carl Zeiss Vario-Tessar
DCR-DVD110E/DVD115E/DVD610E
Optical: 40×, Digital: 80×, 2 000×
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Optical: 25×, Digital: 50×, 2 000×
Filter diameter: 30 mm (1 3/16 in.)
Focal length
DCR-DVD110E/DVD115E/DVD610E
F1.8 - 4.1
f = 1.9 - 76 mm (3/32 - 3 in.)
When converted to a 35 mm still camera
For movies:
41 - 1 640 mm (1 5/8 - 64 5/8 in.) (16:9)
For still images:
48 - 1 920 mm (1 15/16 - 75 5/8 in.) (4:3)
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
F1.8 - 3.2
f = 2.5 - 62.5 mm (1/8 - 2 1/2 in.)
When converted to a 35 mm still camera
For movies:
41 - 1 189 mm (1 5/8 - 46 7/8 in.) (16:9)
**
For still images:
36 - 900 mm (1 7/16 - 35 1/2 in.) (4:3)
Color temperature
[AUTO], [ONE PUSH], [INDOOR]
(3 200 K), [OUTDOOR] (5 800 K)
Continued ,
126
Specifications (Continued)
Minimum illumination
DCR-DVD110E/DVD115E/DVD610E
6 lx (lux) (AUTO SLW SHUTTR ON, Shutter
speed 1/25 second)
0 lx (lux) (during NightShot plus function)
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
8 lx (lux) (AUTO SLW SHUTTR ON, Shutter
speed 1/25 second)
0 lx (lux) (during NightShot plus function)
* “Exif” is a file format for still images,
established by the JEITA (Japan Electronics and
Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
**The focal length figures are actual figures
resulting from wide angle pixel readout.
Manufactured under license from Dolby
Laboratories.
Input/Output connectors
A/V Remote Connector
Video/audio output jack
USB jack
mini-B
(DCR-DVD110E/DVD115E/DVD310E/
DVD410E: output only)
LCD screen
Picture
6.7 cm (2.7 type, aspect ratio 16:9)
Total number of pixels
123 200 (560 × 220)
General
Power requirements
DC 6.8 V/7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
Using the LCD screen or the viewfinder with
normal brightness
DCR-DVD110E/DVD115E/DVD610E
LCD: 2.9 W
Viewfinder: 2.7 W
DCR-DVD310E/DVD710E
LCD: 3.2 W
Viewfinder: 2.8 W
DCR-DVD410E/DVD810E
LCD: 2.8 W
Viewfinder: 2.4 W
Operating temperature
C to +4C (3F to 10F)
Storage temperature
-2C to +6C (-F to +14F)
Dimensions (Approx.)
55 × 89 × 130 mm (2 1/4 × 35/8 × 5 1/8 in.)
(w×h×d) including the projecting parts
55 × 89 × 130 mm (2 1/4 × 35/8 × 5 1/8 in.)
(w×h×d) including the projecting parts with
the rechargeable battery pack NP-FH40
attached
Mass (Approx.)
DCR-DVD110E/DVD115E/DVD610E
390 g (13 oz) main unit only
440 g (15 oz) including the rechargeable
battery pack NP-FH40 and a disc
DCR-DVD310E/DVD710E
400 g (14 oz) main unit only
450 g (15 oz) including the rechargeable
battery pack NP-FH40 and a disc
DCR-DVD410E/DVD810E
400 g (14 oz)main unit only
445 g (15 oz) including the rechargeable
battery pack NP-FH40
Supplied accessories
See page 19.
127
Additional Information
AC Adaptor AC-L200/L200B
Power requirements
AC 100 V - 240 V, 50/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
18 W
Output voltage
DC 8.4 V*
Operating temperature
C to +4C (3F to 10F)
Storage temperature
-2C to +6C (-F to +14F)
Dimensions (Approx.)
48 × 29 × 81 mm (1 15/16 × 1 3/16 × 3 1/4 in.)
(w×h×d) excluding the projecting parts
Mass (Approx.)
170 g (6 oz) excluding the power cord (mains
lead)
* See at the label of the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FH40
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
4.9 Wh (680 mAh)
Type
Li-ion
Design and specifications are subject to change
without notice.
On trademarks
“Handycam” and
are registered trademarks of Sony Corporation.
“Memory Stick,” , “Memory Stick
Duo,” “ ,” “Memory Stick
PRO Duo,” “ ,”
“Memory Stick PRO-HG Duo,”
,” “Memory Stick
Micro,” “MagicGate,” “ ,”
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks or
registered trademarks of Sony Corporation.
“InfoLITHIUM” is a trademark of Sony
Corporation.
DVD-RW, DVD+RW, DVD-R, and DVD+R
DL logo are trademarks.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
Dolby Digital Stereo Creator and Dolby Digital
5.1 Creator are trademarks of Dolby
Laboratories.
Microsoft, Windows, Windows Media,
Windows Vista and DirectX are either
registered trademarks or trademarks of
Microsoft Corporation in the United States and/
or other countries.
Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and ® are
not mentioned in each case in this manual.
Continued ,
128
Specifications (Continued)
Notes on the License
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
“C Library,” “Expat,” “zlib,” and “libjpeg”
software are provided in your camcorder. We
provide this software based on license agreements
with their owners of copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“C Library,” “Expat,” “zlib,” and “libjpeg”
software.
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. To
download, go to the following website and select
DCR-DVD810.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“GPL,” and “LGPL” software.
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
http://www.adobe.com/
129
Quick Reference
Quick Reference
Identifying parts and controls
The numbers in ( ) are reference pages.
A NIGHTSHOT PLUS switch (41)
B Memory Stick Duo slot/cover and
access lamp (32)
The access lamp lights for both the
internal memory* and a “Memory Stick
PRO Duo.
C LCD screen/touch panel (16, 26)
D (HOME) button (17, 78)
E Zoom buttons (40, 46)
F START/STOP button (34, 39)
G RESET button
Initializes all the settings, including the
setting of the date and time.
H QUICK ON button and lamp (41)
I EASY button (34)
J Viewfinder lens adjustment lever (26)
K . (BACK LIGHT) button (41)
L Speaker
Playback sounds come out from the
speaker. For how to adjust the volume,
see page 45.
M (USB) jack (64)
DCR-DVD110E/DVD115E/DVD310E/
DVD410E:
Output only
N (VIEW IMAGES) button (35, 43)
O DUBBING button* (55)
P DISP/BATT INFO button (21)
* DCR-DVD410E/DVD810E
Continued ,
130
Identifying parts and controls (Continued)
A POWER switch (24)
B Viewfinder (26)
C CHG (charge) lamp (20)
D (Movie)/ (Still) mode lamps (24)
E Battery pack (20)
F Built-in microphone (40)
An Active Interface Shoe* compatible
microphone (optional) will take
precedence when connected.
G Power zoom lever (40, 46)
H PHOTO button (34, 39)
I DC IN jack (20)
J START/STOP button (34, 39)
K Tripod receptacle
Attach the tripod (optional: the length of
the screw must be less than 5.5 mm
(7/32 in.)) to the tripod receptacle using
a tripod screw.
L BATT (battery) release lever (21)
* DCR-DVD310E/DVD410E/DVD710E/
DVD810E
131
Quick Reference
A Active Interface Shoe *
The Active Interface Shoe supplies
power to optional accessories such as a
video light, a flash, or a microphone.
The accessory can be turned on or off as
you operate the POWER switch on your
camcorder. Refer to the operating
instructions supplied with your
accessory for details.
The Active Interface Shoe has a safety
device for fixing the installed accessory
securely. To connect an accessory, press
down and push it to the end, and then
tighten the screw. To remove an
accessory, loosen the screw, and then
press down and pull out the accessory.
When you are recording movies with an
external flash (optional) connected to the
accessory shoe, turn off the power of the
external flash to prevent charging noise
being recorded.
When an external microphone (optional) is
connected, it takes precedence over the
built-in microphone (p. 40).
B Disc cover (30)
C Hook for a shoulder belt
Attach a shoulder belt (optional).
D Grip belt (27)
E Disc cover OPEN switch and ACCESS
lamp (30)
F Lens (Carl Zeiss Lens) (6)
G Infrared port/Remote sensor
*
Point the Remote Commander* (p. 132)
towards the remote sensor to operate
your camcorder.
H LENS COVER switch (26)
I A/V Remote Connector (48, 62)
Connect other optional accessories.
* DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Continued ,
132
Identifying parts and controls (Continued)
Remote Commander (DCR-DVD310E/
DVD410E/DVD710E/DVD810E)
A DATA CODE button (84)
Displays the date and time or camera setting
data of the recorded images when you press this
during playback.
B PHOTO button (34, 39)
The on-screen image when you press this
button will be recorded as a still image.
C SCAN/SLOW buttons (35, 44)
D . > (Previous/Next) buttons (35,
44)
E PLAY button (35, 44)
F STOP button (35, 44)
G DISPLAY button (21)
H Transmitter
I START/STOP button (34, 39)
J Power zoom buttons (40, 46)
K PAUSE button (35, 44)
L VISUAL INDEX button (35, 43)
Displays a VISUAL INDEX screen when you
press this during playback.
M b / B / v / V / ENTER buttons
When you press any button on the VISUAL
INDEX/Face Index/Film Roll Index/Playlist
screen, the orange frame appears on the LCD
screen. Select a desired button or an item with
b / B / v / V, then press ENTER to enter.
b Notes
Remove the insulation sheet before using the
Remote Commander.
Point the Remote Commander towards the remote
sensor to operate your camcorder (p. 131).
When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
You cannot select some buttons on the LCD
screen using b / B / v / V.
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the Remote
Commander until it clicks.
When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
Insulation sheet
Tab
133
Quick Reference
Indicators displayed during recording/playback
Recording movies
Recording still images
Viewing movies
Viewing still images
A HOME button (17, 78)
B Remaining battery (approx.) (21)
C Recording status ([STBY] (standby) or
[REC] (recording))
D Recording mode (HQ/SP/LP) (80)
E Media type (12)
F Counter (hour/minute/second)
G OPTION button (18, 90)
H Remaining recordable time of movies
I Audio mode (80) (DCR-DVD115E/
DVD310E/DVD410E/DVD710E/
DVD810E)
J Face Index set (82)
K VIEW IMAGES button (35, 43)
L Image size (82)
M Remaining recordable number of still
images (83, 83)
N Recording folder
When [PHOTO MEDIA SET] is
[MEMORY STICK]
O Return button
P Playback mode
Q Current movie number/Total number of
recorded movies
When [MOVIE MEDIA SET] is [INT.
MEMORY] (DCR-DVD410E/
DVD810E) or [MEMORY STICK]
R Previous/Next button (35, 44)
S Video operation buttons (35, 44)
T Data file name/Scene number
U Current still image number/Total
number of recorded still images
V Playback folder
When [PHOTO MEDIA SET] is
[MEMORY STICK]
W Slide show button (47)
X VISUAL INDEX button (35, 43)
Continued ,
134
Indicators displayed during recording/playback (Continued)
Following indicators appear during
recording/playback to indicate the settings
of your camcorder.
Upper left
Upper right
Center
Bottom
z Tips
The contents and positions of the indicators
illustrated here may differ from the actual
indicators on the screen of your camcorder.
Some indicators do not appear depending on the
model.
The recording date, time, and camera
setting data are recorded automatically on
the media. They are not displayed while
recording. However, you can check them as
[DATA CODE] during playback (p. 84).
You can view the recording date and time
on another device, etc. ([SUB-T DATE],
p. 82).
Indicators when you made
changes
Indicator Meaning
Audio mode (80)
MICREF LEVEL low
(96)
WIDE SELECT (80)
Flash (83, 84)
Self-timer recording (96)
BLT-IN ZOOM MIC
(96)
Indicator Meaning
LCD backlight off (26)
Fader (95)
Indicator Meaning
NightShot plus (41)
Color Slow Shutter (95)
Super NightShot plus
(95)
Upper left Upper right
Bottom Center
E Warning (110)
PictBridge connecting
(64)
Indicator Meaning
Face Index set (82)
9 Manual focus (92)
SCENE SELECTION
(93)
.
Backlight (41)
n White balance (94)
SteadyShot off (81)
Digital effect (96)
Picture effect (96)
Tele macro (92)
EXPOSURE (93)/
SPOT METER (93)
Data code during recording
Indicator Meaning
135
Quick Reference
Glossary
x 5.1ch surround sound
A system that plays back sound on 6 speakers, 3 at
the front (left, right and center) and 2 at the rear
(right and left) with an additional low-pass
subwoofer counted as a 0.1 channel for
frequencies of 120 Hz or lower.
x Dolby Digital
An audio encoding (compression) system
developed by Dolby Laboratories Inc.
x Dolby Digital 5.1 Creator
Sound compression technology developed by
Dolby Laboratories Inc. which compresses audio
efficiently while preserving high sound quality. It
enables recording of 5.1ch surround sound while
using disc space more efficiently. Discs created
by Dolby Digital 5.1 Creator can be played back
on a device compatible with the disc created on
your camcorder.
x JPEG
JPEG stands for Joint Photographic Experts
Group, a still image data compression (data
capacity reduction) standard. Your camcorder
records still images in JPEG format.
x MPEG
MPEG stands for Moving Picture Experts Group,
the group of standards for the coding (image
compression) of video (movie) and audio. There
are MPEG1 and MPEG2 formats. Your
camcorder records movies in MPEG2 format.
x Thumbnail
Reduced-size images which enable you to view
many images at the same time. [VISUAL
INDEX], [ INDEX], [ INDEX], etc. are
thumbnail display system.
x VBR
VBR stands for Variable Bit Rate, the recording
format for automatically controlling the bit rate
(the volume of recording data in a given time
segment) according to the scene being recorded.
For fast-moving video, a lot of media space is
used to produce a clear image, so the recording
time to the media shortens.
x VIDEO mode
One of the recording formats you can select when
using a DVD-RW. VIDEO mode provides
excellent compatibility with other DVD devices.
x VR mode
One of the recording formats you can select when
using a DVD-RW. VR mode enables editing
(deleting or sequence rearrangement) with your
camcorder. Finalizing the disc lets you play it
back on a VR mode compatible DVD device.
136
Index
Numeric
12IMAGES...........................85
16:9.......................................48
16:9 WIDE ...........................31
21-pin adaptor.......................49
4:3...................................31, 48
5.1ch surround recording......40
5.1ch surround sound ...........40
6IMAGES.............................85
8cm DVD .............................12
A
AC Adaptor ..........................20
Additional recording.............74
AREA SET...........................88
Aspect ratio...........................48
AUDIO MODE ....................80
AUTO SLW SHUTTR (Auto
slow shutter) .................81, 109
A.SHUT OFF (Auto shut off)
..............................................89
A/V connecting cable .....48, 62
B
BACK LIGHT..............41, 109
Battery ..........................20, 132
Battery Info...........................21
BEACH ................................94
BEEP ....................................86
BLACK FADER ..................95
BLT-IN ZOOM MIC............96
Button-type lithium battery
............................................132
B&W ....................................96
C
CALIBRATION.................122
CAMERA DATA.................84
CANDLE..............................93
CD-ROM..............................97
Charging time .......................21
CLOCK SET........................ 24
CLOCK/LANG.................... 88
COLOR SLOW SHTR (Color
Slow Shutter) ............... 95, 109
Computer ............................. 97
Connecting
Printer ........................... 64
TV................................. 48
VCR or DVD/HDD
recorders ....................... 62
Copying still images ............ 56
D
DATA CODE ...................... 84
Date Index............................ 46
DATE/TIME.......... 25, 84, 134
DC IN jack........................... 20
DC plug................................ 20
DELETE
Movies .......................... 51
Still images ................... 52
DEMO MODE..................... 88
DIGITAL ZOOM ................ 81
Disc ...................................... 30
DISC SELECT GUIDE ....... 75
DISP OUTPUT.................... 87
DISPLAY............................. 85
DIVIDE
Original......................... 58
Playlist .......................... 61
Dolby Digital 5.1 Creator .. 135
Double-sided disc .............. 117
Dubbing movies............. 55, 62
DVD drive............................ 70
DVD menu........................... 69
DVD-R................................. 12
DVD-RW ............................. 12
DVD+R DL.......................... 12
DVD+RW ............................ 12
D.EFFECT (Digital effect)
..................................... 96, 109
E
Easy Handycam operation.... 34
Editing ..................................50
EXPOSURE .................93, 109
F
Face Index ......................45, 82
FADER.........................95, 109
FILE NO. (File number).......83
Film Roll Index ....................45
Finalize.........................67, 108
FIREWORKS.......................93
FLASH LEVEL....................83
FLASH MODE ....................83
FOCUS.........................92, 105
FORMAT
Disc ...............................72
Internal memory............72
“Memory Stick PRO Duo”
.......................................72
G
GENERAL SET ...................88
Grip belt................................27
GUIDEFRAME....................81
H
HOME MENU ...............16, 78
CLOCK/LANG.............88
GENERAL SET............88
MOVIE SETTINGS...... 80
OUTPUT SETTINGS...87
PHOTO SETTINGS .....82
SOUND/DISP SET.......86
VIEW IMAGES SET....84
HQ ........................................80
I
IMAGE SIZE .......................82
INDEX SET (Face Index set)
..............................................82
137
Quick Reference
Indicators ............................134
INDOOR...............................94
InfoLITHIUM.....................119
Install (software)...................97
Insulation sheet ...................132
J
JPEG ...................................135
L
LANDSCAPE.......................94
LANGUAGE SET................88
LAST SCENE DEL (delete)
..............................................52
LCD backlight ......................26
LCD BL LEVEL (LCD back
light level).....................86, 106
LCD BRIGHT ......................86
LCD COLOR........................86
LCD panel.............................26
Lens cover.............................26
LP..........................................80
M
Maintenance........................117
MANAGE MEDIA category
..............................................66
“Memory Stick”..............5, 118
“Memory Stick PRO Duo”
..................................5, 32, 118
MICREF LEVEL..........96, 109
Mirror mode..........................41
Moisture condensation........121
MOVIE DUB........................55
MOVIE SETTINGS .............80
Movies ............................34, 39
MPEG .................................135
N
NIGHTSHOT LIGHT ..........80
NightShot plus ......................41
NTSC ..................................114
Number of still images
recordable.............................83
O
OLD MOVIE .......................96
ONE PUSH .......................... 94
OPTION MENU ..................90
Original
DELETE ....................... 51
DIVIDE......................... 58
OTHERS category ...............50
OUTDOOR .......................... 94
OUTPUT SETTINGS ..........87
P
PAL ....................................114
PASTEL ............................... 96
PHOTO COPY..................... 56
PHOTO SETTINGS ............82
PictBridge.............................64
PICT.EFFECT (Picture effect)
...................................... 96, 109
Playback .........................35, 43
Playback zoom ..................... 46
Playing time ......................... 22
Playlist
Creating......................... 59
Divide............................ 61
Erase.............................. 60
Move ............................. 61
Playback........................60
PORTRAIT .......................... 94
Power cord (mains lead) ......20
Precautions ......................... 117
Preparation ........................... 20
Print...................................... 64
Protect ................................113
Q
QUICK ON ..........................41
QUICK ON STBY ...............89
R
REC MODE (Recording mode)
..............................................80
Recording .......................34, 38
Recording format..................12
Recording time .........13, 21, 33
REDEYE REDUC................84
Remaining battery ................21
REMAINING SET (Remaining
media display setting)...........81
Remote Commander ...102, 132
REMOTE CTRL ..................89
REPAIR IMG.DB F. ............76
S
S video cable...................48, 62
SCENE SELECTION
......................................93, 109
Self-diagnosis display.........110
SELF-TIMER.......................96
SEPIA...................................96
SETTINGS category ............78
Slide show ............................47
SNOW ..................................94
SOUND SETTINGS ............79
SOUND/DISP SET ..............86
SP..........................................80
Specifications .....................125
SPORTS (Sports lesson).......94
SPOT FOCUS ..............92, 109
SPOT METER (Flexible spot
meter)............................93, 109
SPOTLIGHT ........................94
STEADYSHOT....................81
Still Images.....................34, 39
SUB-T DATE.......................82
SUMMERTIME ...................88
SUNRISE&SUNSET ...........93
S.NIGHTSHOT PLS (Super
NightShot plus).............95, 109
Continued ,
138
Index (Continued)
T
TELE MACRO.............92, 109
Tripod.................................130
TV color system .................114
TV TYPE........................48, 87
TWILIGHT ..........................93
U
UNFINALIZE ..............74, 108
USB 2.0 ................................97
USB cable.......................64, 98
Using abroad.......................114
V
VBR......................................13
VF B.LIGHT (Viewfinder
backlight)..............................86
VIDEO mode........................12
VIEW IMAGES SET ...........84
VISUAL INDEX............35, 43
VOLUME.......................45, 86
VR mode...............................12
W
Warning indicators .............110
Warning messages..............112
WHITE BAL. (White balance)
......................................94, 109
WHITE FADER...................95
WIDE SELECT............80, 109
Windows...............................97
World time difference ........115
Z
Zoom ....................................40
ZOOM LINK........................85
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony DCR-DVD110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony DCR-DVD110 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Sony DCR-DVD110

Sony DCR-DVD110 Gebruiksaanwijzing - Nederlands, Deutsch - 283 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info