38
GB
Speaker Setup
You can set your personal preferences on the DVD func-
tion mode.
Adjust the following settings for the built-in 5.1 channel
surround decoder.
1
Press SETUP/MENU.
The Setup menu appears.
2
Select “5.1 Speaker Setup” using the V/v
buttons on the setup menu.
3
While “5.1 Speaker Setup” is selected,
press b button.
4
Press b buttons to select the desired speaker.
5
Adjust options by using V/v/B/b buttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
er (Left), Front speaker (Right), Center Speaker, Rear
speaker (Left), Rear speaker (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press B / b to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
Subwoofer’s size is fixed “Large” and the other
speaker’s size are fixed “small”.
Distance
If you connected speakers to your DVD/VCR Receiver,
setting the Distance lets the speakers (except sub-
woofer) know how far the sound has to travel to reach
your set listening point. This allows the sound from each
speaker to reach the listener at the same time
(0.3 - 6.0 m, 0.3m=1ft).
Note
You can not set the distance of subwoofer speaker.
Test
Press ENTER/OK to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Center → Front Right (R) →
Rear Right (R) → Rear Left (L)→ Subwoofer
You can stop the test using V/v.
Return
Press ENTER/OK to return to the previous menu.
