Handleiding Sony CDP-CA9ES (pagina 3 van 20) (Engels)

50406

Verklein

Vergroot

Pagina terug

1/20

Pagina verder

3-798-765-31 (1)

 1995 by Sony Corporation

Operating Instructions

CDP-CA9ES

CDP-CA8ES

WARNING

To prevent fire or shock

hazard, do not expose

the unit to rain or

moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

INFORMATION

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or

television reception, which can be

determined by turning the equipment off

and on, the user is encouraged to try to

correct the interference by one or more of

the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

CAUTION

You are cautioned that any changes or

modification not expressly approved in

this manual could void your authority to

operate this equipment.

Owner’s Record

The model and serial numbers are

located at the rear of the unit.

Record the serial number in the space

provided below. Refer to them whenever

you call upon your Sony dealer

regarding this product.

Model No. _________________________

Serial No. _________________________

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

models CDP-CA9ES and CDP-CA8ES.

The CDP-CA9ES is the model used for

illustration purposes, unless otherwise

mentioned. Any difference in operation

is clearly indicated in the text, for

example, “CDP-CA9ES only.”

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or similar

names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

Getting Started

Playing a CD ........................................................................................................................ 4

Getting Started

Unpacking............................................................................................................................. 5

Hooking Up the System ...................................................................................................... 5

Playing CDs

Using the Display ................................................................................................................ 7

Replacing Discs While Playing a Disc .............................................................................. 8

Locating a Specific Disc ...................................................................................................... 8

Locating a Specific Track or a Point in a Track ............................................................... 9

Playing Tracks Repeatedly ............................................................................................... 10

Playing in Random Order (Shuffle Play) ....................................................................... 10

Creating Your Own Program (Program Play)............................................................... 11

Playing Using a Timer (CDP-CA9ES only) .................................................................... 12

Recording From CDs

Recording Your Own Program ........................................................................................ 13

Fading In or Out................................................................................................................. 13

Storing Information About CDs (Custom Files) (CDP-CA9ES only)

What You Can Do With the Custom Files ..................................................................... 14

Grouping Tracks (Music Clip) ......................................................................................... 14

Labeling a Disc (Disc Memo) ........................................................................................... 15

Storing Specific Tracks (Delete Bank) ............................................................................. 16

Storing the Optimum Playback Level of a Disc (Level File)........................................ 17

Additional Information

Precautions ......................................................................................................................... 18

Notes on CDs ...................................................................................................................... 18

Troubleshooting ................................................................................................................. 19

Specifications ...................................................................................................................... 19

Index

Index ..................................................................................................................... Back cover

TABLE OF CONTENTS

Playing a CD

Before you start…

Turn on the amplifier and select the CD player position.

Press POWER to

turn on the

player.

Press §OPEN/

CLOSE, and place

a disc on the disc

tray.

To place other discs,

press DISC SKIP and

place the discs in

the order you want

to play.

Each time you press the button,

the disc tray turns and you can

place the discs in the empty disc

compartments. The player plays

the disc in front of you first.

Disc numberWith the label

side up

Adjust the

headphone

volume.

Connect the

headphones.

Press CONTINUE.

Each time you press the button, “ALL DISCS” and

“1␣ DISC” appear alternately in the display.

When you select

ALL DISCS

1␣ DISC

The player plays

All discs in the player consecutively

in the order of disc number

Only the disc you’ve selected

Press (.

The disc tray closes and the player plays all the tracks once.

Adjust the volume on the amplifier.

To stop playback

Press p.

When you want to

Pause

Resume play after pause

Go to the next track

Go back to the preceding track

Go to the next disc

Select a disc directly

Stop play and remove the CD

Press

P or (

≠

DISC SKIP

DISC 1 – 5

§OPEN/CLOSE

You can select a disc directly and start playing it

in Step 5

Press one of the DISC 1 – 5 buttons, and the player

plays the disc you’ve selected.

POWER

12345

DISC

CONTINUE SHUFFLE PROGRAM

DISC SKIP

OPEN/CLOSE

LINE OUT PHONE LEVEL

PHONES

Getting Started

Unpacking

Check that you received the following items:

• Audio connecting cord (1)

• Remote commander (remote) (1)

RM-D645 for CDP-CA9ES

RM-D515 for CDP-CA8ES

• Sony SUM-3 (NS) batteries (2)

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert two size AA (R6) batteries by matching the +

and – on the batteries. When using the remote, point it

at the remote sensor g on the player.

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

Getting Started

CD player

Amplifier

: Signal flow To an AC outlet

Line output

(R)

Line output

(L)

To an AC

outlet

Audio input

(R)

Audio input

(L)

White

(L)

Red

(R)

White

(L)

Red

(R)

What cords will I need?

Audio cord (supplied) (1)

Hookups

When connecting an audio cord, be sure to match the

color-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

INPUT

LINE OUT

FIXED

CD player Amplifier

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

Getting Started

• If you have an analog power amplifier

Connect the amplifier via the VARIABLE LINE OUT jacks

using the supplied audio cord. You can adjust the output

level with the LINE OUT/PHONE LEVEL control on the

player or the LINE OUT LEVEL buttons on the remote.

AmplifierCD player

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Where do I go next?

Now you’re ready to use your player.

If you aren’t familiar with how to play CDs, go to the section

“Playing a CD” on page 4.

Then, go to the following sections for other operations.

Transporting the player

Before transporting the player, follow the procedure

below to return the internal mechanisms back to their

original position.

1 Remove all the discs from the disc tray.

2 Press §␣ OPEN/CLOSE to close the disc tray.

“–NO␣ DISC–” appears in the display.

3 Wait for 10 seconds, then press POWER to turn off

the player.

INPUT

LINE OUT

VARIABLE

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using the optical cable (not supplied). Take off

the cap and plug in the optical cable.

Note that you cannot use fading in or out (page 13) and

Level File (CDP-CA9ES only, page 17) functions when

making this connection.

POC-15

Optical cable (not supplied)

CD player

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software other

than music, such as a CD-ROM.

• If you have a Sony CD player, receiver or amplifier with

the CONTROL S OUT connector

Connect the component via the CONTROL S IN connector

using the CONTROL S cable (not supplied). You can

remotely control this player through the other component.

Digital component

DIGITAL OUT

OPTICAL

DIGITAL INPUT

OPTICAL

CD player

Other component

CONTROL S

OUT

Playing CDs

Display information while playing a disc

While playing a disc, the display shows the current

disc number, track number, playing time of the track

and the music calendar.

Music calendar

The track numbers in the music calendar disappear

after they are played.

Checking the remaining time

Each time you press TIME/MEMO or TIME while

playing a disc, the display changes as shown in the

chart below.

Playing time and

number of the

current track

Remaining time

on the current

track

Using the Display

You can check information about the disc using the

display.

Playing CDs

CDP-CA9ES

TIME/MEMO

CDP-CA8ES

TIME

Checking the total number and playing

time of the tracks

Press TIME/MEMO (CDP-CA9ES) or TIME (CDP-

CA8ES or on the remote) before you start playing.

The display shows the current disc number, the total

number of tracks, total playing time and music

calendar.

1 2 3 4 5

ALL DISCS

DISC

TRACK

MIN SEC

12345

678910

Current disc number Total playing time

Music calendarTotal number of tracks

If the disc has more than 20 tracks, the z indication

appears next to 20 on the music calendar. The

information also appears when you press §␣ OPEN/

CLOSE to close the disc tray.

Notes on the disc number indications

• The red circle around a disc number indicates the disc is

ready to be played.

• When all the tracks on a disc have been played, the semi-

circle around the disc number disappears.

• When a disc compartment is recognized as empty, the semi-

circled disc number disappears.

1 2 3 4 5

ALL DISCS

DISC

TRACK

MIN SEC

12345

678910

Current disc number Playing time

Current track number

Press

This information is available only in

Continuous Play mode.

Press

Remaining time

on the disc

Disc number or

Disc Memo

Press

If you’ve stored a Disc Memo

(CDP-CA9ES only, see page 15), the

Disc Memo appears.

1 2 3 4 5

ALL DISCS

DISC

TRACK

MIN SEC

12345

678910

1 2 3 4 5

ALL DISCS

DISC

TRACK

MIN SEC

12345

678910

1 2 3 4 5

ALL DISCS

DISC

TRACK

MIN SEC

12345

678910

1 2 3 4 5

ALL DISCS

12345

678910

If the track number exceeds 20,

“–␣ –␣ .␣ –␣ –” appears instead of the

remaining time.

Playing CDs

Replacing Discs While Playing

a Disc

You can open the disc tray while playing a disc so that

you can check what discs are to be played next and

replace discs without interrupting playback of the

current disc.

EX-CHANGE DISC SKIP

1 Press EX-CHANGE.

“EX-CHANGE” appears in the display. The disc

tray opens and two disc compartments appear.

Even if the player is playing a disc, it doesn’t stop

playing.

2 Replace discs in the compartments with new ones.

The player plays the disc on the left side

compartment after the current disc, and then the

one on the right side compartment.

3 Press DISC SKIP.

The disc tray turns and other two disc

compartments appear.

4 Replace discs in the compartments with new ones.

5 Press EX-CHANGE.

The disc tray closes.

Notes

• If the playback of the current disc ends while the disc tray is

open, the player stops playing. If the disc is played in

1␣ DISC Repeat mode (see page 10), the current disc starts

playing again.

• In ALL DISCS Shuffle Play mode (see page 10), tracks are

reshuffled on the current disc, while the disc tray is open.

• In Program Play mode (see page 11), only the tracks on the

current disc are played.

• Do not push the disc tray to close it in Step 5, as you may

damage the player.

Locating a Specific Disc

You can locate any disc before or while playing a disc.

(

DISC 1 – 5

DISC SKIP

DISC 1 – 5

MUSIC SCAN

(

RM-D645 for CDP-CA9ES

(

RM-D515 for CDP-CA8ES

DISC SKIP

DISC 1 – 5

MUSIC SCAN

To locate

The next disc

A specific disc directly

A disc by scanning the first

track of each disc for 10

seconds (Music Scan)

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time

you want (10, 20 or 30) appears in the display. Each time

you press the button, the playing time changes cyclically.

Press

DISC SKIP while playing a disc

DISC 1 – 5

MUSIC SCAN before you start

playing in ALL DISCS

Continuous Play mode. When

you find the disc you want,

press ( to start playing.

Playing CDs

Locating a Specific Track or a

Point in a Track

You can quickly locate any track while playing a disc

using the ≠/± (AMS: Automatic Music Sensor)

buttons or number buttons. You can also locate a

specific point in a track while playing a disc.

≠/±

>10Number buttons

RM-D645 for CDP-CA9ES

MUSIC SCAN

>20

Number

buttons

(

0/)

RM-D515 for CDP-CA8ES

(

0/)

=/+

MUSIC SCAN

Number

buttons

>20

To locate

The next or

succeeding tracks

The current or

preceding tracks

A specific track

directly

A track by scanning

each track for 10

seconds (Music

Scan)

A point while

monitoring the sound

A point quickly by

observing the display

during pause

When you directly locate a track numbered over 10

(or 20 when using the remote)

Press >10 (or >20 on the remote) first, then the

corresponding number buttons. To enter “0,” use button

10.

Example: To play track number 30

Press >10 (or >20 on the remote) first, then 3

and 10.

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time

you want (10, 20 or 30) appears in the display. Each time

you press the button, the playing time changes cyclically.

Note

If “–OVER–” appears in the display, the disc has reached the

end while you were pressing ). Press 0 or ≠ to go

back.

Press

± repeatedly until you find the

track

≠ repeatedly until you find the

track

Number button of the track

MUSIC SCAN before you start playing

in 1␣ DISC Continuous Play mode.

When you find the track you want,

press ( to start playing.

) (forward) or 0 (backward) and

hold down until you find the point

0/) and hold down until you

find the point. You will not hear the

sound during the operation.

Playing CDs

Playing Tracks Repeatedly

You can play discs/tracks repeatedly in any play

mode.

REPEAT

The player repeats

All the tracks on all discs

All the tracks on the current

disc

All the tracks on all discs in

random orders

All the tracks on the current

disc in random orders

The same program

Press REPEAT while playing a disc.

“REPEAT” appears in the display. The player repeats

the discs/tracks as follows:

When the disc is played in

Continuous Play

(ALL DISCS) (page 4)

Continuous Play

(1␣ DISC) (page 4)

Shuffle Play

(ALL DISCS) (page 10)

Shuffle Play

(1␣ DISC) (page 10)

Program Play (page 11)

To cancel Repeat Play

Press REPEAT repeatedly until “REPEAT␣ OFF” appears in the

display.

Repeating the current track

You can repeat only the current track while the disc is

played in Continuous Play.

While the track you want is being played, press

REPEAT repeatedly until “REPEAT 1” appears in the

display.

(

SHUFFLE

DISC 1 – 5

Playing in Random Order

(Shuffle Play)

You can have the player “shuffle” tracks and play in a

random order. The player shuffles all the tracks on all

discs or on the disc you’ve specified.

Shuffle Play on all discs

You can play all tracks on all discs in a random order.

1 Press SHUFFLE repeatedly until “ALL DISCS”

appears in the display.

2 Press ( to start ALL DISCS Shuffle Play.

The

indication appears while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

You can specify discs during Shuffle Play (Select

Shuffle Play)

You can specify discs before or during ALL DISCS

Shuffle Play, and the tracks on the specified discs are

played in a random order.

Press DISC 1 – 5 to specify the discs after Step 1.

Semi-circles appear around the specified disc numbers in

the display. To cancel the selected discs, press DISC 1 – 5

again. The semi-circles disappear.

To return to ALL DISCS Shuffle Play, press SHUFFLE

twice.

Shuffle Play on one disc

You can play all tracks on the specific disc in a random

order.

1 Press SHUFFLE repeatedly until “1␣ DISC” appears

in the display.

2 Press DISC 1 – 5 to start 1␣ DISC Shuffle Play on the

selected disc.

The

indication appears while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

Playing CDs

Creating Your Own Program

(Program Play)

You can arrange the order of the tracks on the discs

and create your own program. The program can

contain up to 32 tracks.

( PROGRAMDISC 1 – 5

Number buttons >10

2 Press DISC 1 – 5 to select the disc.

PROGRAM

>20

DISC 1 – 5

Number

buttons

CLEAR

(

RM-D645 for CDP-CA9ES

CHECK

CLEAR

Number

buttons

DISC 1 – 5

PROGRAM

>20

CHECK

(

1 Press PROGRAM.

“PROGRAM” appears in the display.

If a program is already stored, the last step of the

program appears in the display. When you want to

erase the whole program, hold down CLEAR on

the remote until “ALL␣ CLEAR” appears in the

display (see page 12).

12345

DISC

PROGRAM

TRACK

MIN SEC

12345

678910

“AL” in the display stands for “all” tracks.

When you want to program the whole disc as one

step, skip Step 3 and go to Step 4.

3 Press the number buttons of the tracks you want to

program in the order you want.

To program the track numbered over 10 (or 20

when using the remote), use the >10 button (or >20

on the remote) (see page 9).

RM-D515 for CDP-CA8ES

After one second

Total playing time

12345

DISC

PROGRAM

TRACK STEP

12345

DISC

PROGRAM

TRACK

MIN SEC

Playing order

Last programmed track

Programmed

tracks

If you’ve made a mistake

Press CLEAR on the remote, then press the correct

number button.

4 To program other discs or tracks, do the following:

To program

Other discs

Other tracks on the same disc

Other tracks on other discs

5 Press ( to start Program Play.

To cancel Program Play

Press CONTINUE.

Repeat Step(s)

2 and 3

Playing CDs

You can create your program while checking the disc

labels

While the disc tray is open, follow Steps 1 to 5 with

pressing DISC SKIP to check the disc labels. If you close

the disc tray before Step 5, the total playing time appears

in the display after a while.

Note that, if the programmed track number isn’t found

on the disc, that step is automatically erased.

The program remains even after the Program Play

ends

When you press (, you can play the same program

again.

The program remains until you erase it

If you replace discs, the programmed disc and track

numbers remain. So, the player plays only the existing

disc and track numbers. However, the disc and track

numbers that aren’t found in the player or on the disc are

deleted from the program, and the rest of the program is

played in the programmed order.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20.

—The total playing time of the program exceeds 200 minutes.

Checking the track order

You can check your program before or after you start

playing.

Press CHECK on the remote.

Each time you press this button, the display shows the

disc and track number of each step in the programmed

order. (When a whole disc is programmed as one step,

“AL” appears instead of the track number.) After the

last step in the program, the display shows “–END–”

and returns to the original display. If you check the

order after you start playing, the display shows only

the remaining steps.

Changing the track order

You can change your program before you start playing.

Erase a step

Erase the last step in

the program

Add steps to the end

of the program

Change the whole

program completely

You need to

Press CHECK until the track or disc

you don’t want appears in the

display, then press CLEAR

Press CLEAR. Each time you press

the button, the last track or disc will

be cleared.

Follow Steps 2 to 4 in “Creating Your

Own Program” on page 11

Hold down CLEAR until “ALL

CLEAR” appears in the display to

erase the whole program, then create

a new program following Steps 2 to 4

in “Creating Your Own Program” on

page 11

Playing Using a Timer

(CDP-CA9ES only)

You can start playing a disc at any time you want by

connecting a timer (not supplied). Please also refer to

the instructions for the timer if you need help.

TIMER

1 Press one of the play mode buttons to select the

play mode you want.

2 Set TIMER on the player to PLAY.

3 Set the timer to the time you want.

The player turns off. When the set time comes, the

player turns on and starts playing.

4 After you have used the timer, set TIMER on the

player to OFF.

Play mode buttons

Storing Information About CDs (Custom Files) (CDP-CA9ES only)

Playing tracks in a clip (Clip Play)

Press one of the MUSIC CLIP buttons before you start

playing.

“CLIP ·” appears in the display and the selected

MUSIC CLIP button indicator lights. The player starts

playing tracks in the selected clip.

To play tracks in another clip

Press p to stop playing, then press one of the MUSIC CLIP

buttons you want to play.

Notes

• Clip Play is available only in Continuous and Shuffle Play

mode. If you press MUSIC CLIP in Program Play mode, the

player automatically enters Continuous Play mode and

start Clip Play.

• In ALL DISCS Play mode, the player plays the tracks in the

selected clip on all discs consecutively.

Removing tracks from a clip

1 Before you start playing, press one of the MUSIC

CLIP buttons to start Clip Play.

2 Press ≠ or ± to select the track you want to

remove from the clip.

3 Press ERASE to remove the track.

“CLIP ERASE” appears in the display for a while.

The player starts playing the next track in the clip.

4 Repeat Steps 2 and 3 to remove other tracks.

When you’ve removed all tracks from the clip,

“CLIP A (B, C or D)” indication in the Custom File

indicator disappears.

You can assign a name to a clip

1 Press TIME repeatedly until the clip name such as

“CLIP-A” appears in the display.

2 Follow Steps 2 to 4 in “Labeling a Disc” on this page.

Labeling a Disc (Disc Memo)

You can label a disc using up to 10 characters and have

the player display the Disc Memo every time you select

the disc. The Disc Memo can be anything you like, such

as a title, musician’s name, category or date of purchase.

Orange-

colored letter

buttons

MEMO

INPUT

ERASE

FILE

0/)

1 Insert or select the disc.

2 Press MEMO INPUT on the remote repeatedly

until you find the letter type you want.

Each time you press the button, the display shows

upper case letters (ABC), lower case letters (abc)

and numbers (123) cyclically.

3 Input letters in the order you want by pressing the

orange-colored letter buttons on the remote.

The letter you input appears in the display and the

flashing cursor moves to the next position. You can

change the letter type.

To insert a space, press CLEAR.

If you’ve made a mistake

Press = or + until the letter you want to change

flashes, then press the correct letter button.

4 Press FILE to store the Disc Memo.

“MEMO FILE” appears for a while, then the

display shows the Disc Memo. “MEMO” in the

Custom File indication lights up in the display.

You can assign the Disc Memo while checking the

disc labels

While the disc tray is open, follow Steps 2 and 3 to assign

the Disc Memo to the disc in front of you. Press DISC

SKIP to turn the disc tray and assign the Disc Memos to

other discs. Then, press FILE to store the Disc Memo.

Additional Information

Index

A, B

AMS 4, 9

Automatic Music Sensor. See

AMS

Clip Play 15

Connecting 5

Continuous Play 4

Custom Files

Delete Bank 16

Disc Memo 15

Level File 17

Music Clip 14

what you can do with 14

Delete Bank 16

Disc Memo 15

Editing. See Recording

Erasing

Custom Files 14

Delete Bank 17

Disc Memo 16

Level File 17

Fading 13

Grouping tracks 14

H, I, J, K

Handling CDs 18

Hookups 5

overview 5

Labeling discs 15

Level File 17

Locating

by monitoring 9

by observing the display 9

by scanning 8, 9

directly 8, 9

using AMS 9

M, N, O

Music Clip 14

Music Scan 8, 9

Names of controls

Buttons

CHECK 12

CLEAR 12

CONTINUE 4

DISC 1 – 5 4

DISC SKIP 4

ERASE 14

EX-CHANGE 8

FADER 13

FILE 15, 16

LEVEL FILE 17

LINE OUT LEVEL 17

MEMO INPUT 15

MUSIC CLIP 14

MUSIC SCAN 8, 9

Number 9

§ OPEN/CLOSE 4

Orange-colored letter 15

PROGRAM 11

REPEAT 10

SHUFFLE 10

TIME 7

TIME/MEMO 7

( 4

P 4

p 4

0/) 9

≠/± 4, 9

>10 9

>20 9

Switches

POWER 4

TIMER 12

Control

LINE OUT/PHONE

LEVEL 4, 17

Jack

PHONES 4

Others

Disc tray 4

Display 7

g 5

Index

Sony Corporation Printed in Malaysia

P, Q

Playback

Clip Play 15

Continuous Play 4

Program Play 11

Repeat Play 10

Shuffle Play 10

using a timer 12

Program 11

changing 12

checking 12

for recording 13

Program Edit 13

Recording

a program 13

Remaining time 7

Remote control 5

Repeating 10

Replacing discs while playing

a disc 8

Scanning. See Music Scan

Searching. See Locating

Select Shuffle Play 10

Shuffle Play 10

Storing

information about CDs 14

tracks into Music Clips 14

playback level 17

specific tracks 16

Timer play 12

Total playing time 7

Troubleshooting 19

U, V, W, X, Y, Z

Unpacking 5

Sony CDP-CA9ES Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Sony CDP-CA9ES

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info