Bluetooth pairing
1. Turn Bluetooth on in your device settings.
2. Press and hold the Bluetooth button on the back on the speaker until you hear a tone,
then release. The status light blinks blue when the speaker is ready to pair.
3. Choose Sonos Era 100 from the list of available devices in your Bluetooth settings. Your
mobile device will automatically connect next time.
Line-in
Connect an audio device, like a projector, CD player, or turntable (with a built-in phono
preamp), to any Sonos product that has a line-in port (Era 300, Era 100, Amp, Port, or Five).
Then go to > Line-In to select the source and start playback.
Note: Era 300 and Era 100 require a Sonos Line-In or Combo Adapter (sold separately).
Other products may require a different type of line-in adapter depending on your audio source.
Learn more
Microphone on/off
There are two ways to control the microphones on Era 100:
A universal microphone switch on the back of Era 100 turns all microphones on and off.
A voice services button on top of Era 100 turns voice services on and off without affecting the
microphones needed for Trueplay and other microphone-dependent features.
When both are on, voice control and all microphone-enabled features are available.
When both are off, voice control and all microphone-enabled features are unavailable.
When the universal microphone switch is on and the voice services light is off, Trueplay
and other microphone-enabled features are available but voice control is off.
