771648
1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
English
.
Sonic Boom Alarm Clock
Model SB1000-v3
INSTRUCTION
MANUAL
LISTED
Congratulations on the purchase of your Sonic Boom Alarm Clock! This
unique clock allows you to:
Wake up to any combination of loud pulsating audio alarm, flashing
lights, and shaking bed (bed vibrator sold separately).
Adjust the alarm volume and tone to achieve the most effective audio
alert.
Easily view the large, bright green LED display with adjustable display
angle.
Save your time and alarm settings in the event of a power interruption
through the use of battery backup (9V battery not included).
Use the clock with Sonic Alert's complete line of signaling products,
such as telephone, doorbell, and baby cry signalers.
Special Features of your
Sonic Boom Alarm Clock
Setting the Time of Day
Note: Since your clock has a 24-hour memory, you must make sure that
the time set is AM or PM. A round light in the upper left of the clock
display will indicate PM time. For AM time, the light does not appear.
1) Press and hold the TIME button. Then press the HOUR button until
the correct hour is shown.
2) Press and hold the TIME button again. Then press the MIN button
until the correct minutes are shown.
Setting an Alarm Time
Note: Since your clock has a 24-hour memory, you must make sure that
the time set is AM or PM. A round light in the upper left of the clock
display will indicate PM time. For AM time, the light does not appear.
1) Press and hold the ALARM button. Then press the HOUR button
until the desired alarm hour is shown.
Testing an Alarm
You can use the TEST MODE to check your settings of the audio alarm,
lamp, and vibrator.
1) Press and hold the Snooze and Time buttons for 3 seconds to enter
the Test Mode. The display will show "7ES7" to indicate it is in TEST
mode.
2) If within 1 minute no button on the front is pressed, then it willblack
exit the Test Mode and return back to the Time Mode.
3) While in Test Mode, sliding the Outlet Switch will demonstrate the
different functions of the clock.
4) After you are finished with the Test Mode, press any button (except
the Snooz tons, which has no effect) it will exite, Time and Lamp but
the Test mode immediately.
Selecting 12 or 24 hours format
Press and hold the Hour button for 6 seconds to enter the hour selection
mode, when the display shows "12 H" or "24 H" release the Hour button.
Press and release the hour button to toggle between 12 or 24 hours. If
no selection is made within 4 seconds, then the last displayed hour
format will be chosen and the display will return to the normal Time mode.
Turning the Alarm On and Choosing Waking Options
The Sonic Boom clock can wake you with any combination of flashing
lamp, pulsating audio alarm, and shaking bed. To turn on the alarm, you
must set the OUTLETS switch to the LAMP, VIB (vibrator), or BOTH
positions. This sets the alarm to go off at the alarm time which you have
preset, you will know that the alarm is set, when the clock's Alarm Set
light is on.
Using the Volume and Tone Controls
Use the VOLUME control knob to turn the audio alarm on or off and to
adjust the volume. To increase volume, rotate the knob toward you.
To turn the audio alarm off, rotate the knob away from you until you feel
it click.
Use the TONE control knob to adjust the pitch of the audio alarm.
For a lower pitch alarm, rotate the knob toward you. For a higher pitch,
rotate it away from you.
* Press and hold the ALARM button for six seconds. The clock display
will show the default alarm duration as '30', release the ALARM button.
* Press the MINbutton to adjust the alarm duration to the desired
setting, from 1 minute to 59 minutes.
* When the display is showing the desired alarm duration time, it will
return to the normal clock mode after 3 seconds. The new alarm
duration time setting becomes the new default and remains in the
memory until you change it again.
Snoozing and Turning the Alarm Off
Pressing the blue SNOOZE button will turn the alarm signals off for
nine minutes. After nine minutes, the alarm will go on again.
Pressing the ALARM OFF button will turn the alarm off and
automatically reset the alarm to go on at the same time the next day.
Setting the OUTLETS switch to OFF turns off the alarm. The alarm will
not go off again until you set the OUTLETS switch back to LAMP, VIB,
or BOTH.
Adjusting The Snooze Time
The default snooze time setting is 9 minutes but you may adjust the
snooze time between 1 minute and 30 minutes as desired.
To adjust the snooze duration:
* Press and hold the SNOOZE button for four seconds. The clock display
will show the default snooze time '9'.
* Press the MINbutton to adjust the snooze time to the desired setting,
from 1 minute to 30 minutes.
* When the display is showing the desired snooze duration, it will return
to the normal clock mode after 3 seconds. The new snooze duration
setting becomes the new default and remains in the memory until you
change it again.
Adjusting the LED Time Display Angle
You can adjust the clock's display by simply moving it forward and
backward.
Using a Lamp With the Alarm Clock
To use a lamp that is connected to the Sonic Boom alarm clock, follow
these steps:
1) Plug the lamp into the AC outlet on the back of the clock.
2) Make sure the ON/OFF switch on the lamp is in the ON position.
3) Press the large yellow LAMP button on the front of the clock to turn
the lamp on.
4) Press the lamp button again to turn the lamp off
5) The light will flash to alert you to the alarm if the light is either on or off.
Dimmer Operation
Auto dimmer built in
Battery Backup
In the event of a power interruption, the Sonic Boom alarm clock can
use battery backup to save your time and alarm settings until power is
restored.
To use battery backup, you can install a 9V battery (not provided) in the
clock.
During a power interruption, the clock's display will turn off, butNote:
time and alarm settings will be saved.
Vibrator and Lamp Connected
OUTLETS switch set to BOTH
Volume ON or OFF, depending upon your
preference
Vibrator
(with Audio On
or Off)
Vibrator Connected
Vibrator switch set to either STEADY or PULSE
OUTLETS switch set to VIB (vibrator)
Volume ON or OFF, depending upon your
preference
Flashing Light
and Vibrator
(with Audio
On or Off)
Audio Alarm only Volume ON
Tone Adjusted
OUTLETS switch set to OFF
Use the chart below to set the alarms you want to wake up to:
Connect Lamp and turn ON
OUTLETS switch set to LAMP
Volume ON or OFF, depending upon your
preference
Flashing Light
(with Audio On
or Off)
Using Optional Transmitters with the Alarm Clock
Using the Super Shaker 12V Bed Vibrator Option
To connect the vibrator to the clock, locate the DC outlet on the back of
the clock.
Plug the vibrator into this outlet. Then simply put the vibrator under your
pillow or mattress.
You can adjust the operation of the VIBRATOR switch to the method
which is most effective to wake you up:
* Setting the VIBRATOR switch to STEADY means the vibrator will have
a constant vibration when the alarm goes off.
* Setting the VIBRATOR switch to PULSE means the vibrator will vibrate
on and off when the alarm goes off.
To turn the clock's remote receiver on for use with a remote
transmitter:
Press and hold the ALARM OFF button for 3 seconds to toggle
RECEIVER between ON and OFF status. There is a round indicator light
at the top right corner to indicate status. The software default setting is
ON.
If you are not using any Sonic Alert remote transmitters, or if you do not want
the clock to respond to a transmitter, set the switch to OFF.
NOTE: If you set the OUTLETS switch to OFF, the audio alarm will not
sound.
Note: Please use only an Alkaline battery with the Sonic Alert Boom Clock.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SONIC ALERT'S LIMITED WARRANTY
The Sonic Boom Alarm Clock Model SB1000 is warranted
against manufacturing defects in materials and workmanship
for FIVE (5) years from the date of purchase. Within this
period Sonic Alert will repair or replace the SB1000 without
charge for parts and labor. Simply send the Sonic Boom
Alarm Clock SB1000 (post-paid) and your sales slip as proof
of purchase to : Sonic Alert, Inc.,1050 East Maple Road, Troy,
MI 48083
R
Time Set
Button
PM Indicator
Alarm Set
Button
Minute
Button
Hour
Button
Alarm Set
Indicator
Outlets
Switch
Outlets
Switch
Volume
Control
Display
Tone
Control
Alarm Off
Button
Snooze
Button
2) Press and hold the ALARM button again. Then press the MIN (minute)
button until the desired alarm minutes are shown. To install a battery, use a small screwdriver or key to remove the battery
compartment access door from the bottom of the clock. Once you've
installed the battery, the cover clips back into place.
AC Outlet
for Lamp
Back View of Clock
DC Outlet
for Vibrator
VIBRATOR
120 VAC
12 VDC
200 WATTS MAX 0.5A MAX
LAMP
Vibrator
Switch
Bottom View of Clock
Battery
Compartment
Cover
DS700 Doorbell Signaler
TR 75 Telephone Signaler
BC 400 Baby Cry Signaler
Sonic Alerts offers a number of transmitters that work with the clock's
remotereceiver, including:
1050 East Maple Rd. Troy, MI 48083
1-888-864-2446 fax 248-577-5433
e-mail: sonic-info@sonicalert.com
Web Site: www.SonicAlert.com
The Sonic Boom alarm clock includes a remote receiver which allows
the clock to set off flashing lights, the vibrator, and an audio alarm when
it receives a signal from a remote transmitter.
Adjusting The Alarm Duration Time
The default alarm duration time setting is 30 minutes, you may adjust the
alarm duration between 1 minute and 59 minutes as desired. To adjust
the alarm duration:
TO REDUCE THE RISK OF
ELECTRICAL SHOCK,
DO NOT REMOVE THE
COVER (OR BACK) FROM
THE PRODUCT. NO USER
SERVICEABLE PARTS
INSIDE. REFER
SERVICING TO YOUR
SONIC ALERT DEALER.
The Lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
CAUTION:
Receiver On/Off
Switch
Receiver On
Indicator
Auto Dimmer
Sensor
Lamp
Button
99.00 mm
210.00 mm
MODEL:RHK923 093 HK923-007 (Rev01)-!"# $%& '()* +,-80 FRONT

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sonic Alert SB1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sonic Alert SB1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info