680783
63
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
63
S10931-00001_Rev-D_EN
12. twin operation
12.1 twin operation
Two operators can be controlled with one control unit,
for example in a double garage with two garage doors.
Both operators are connected to one control unit for this
purpose.
2
1
Fig. Installation example for twin operation, slave (1) and
master (2)
Mode of operation
If one of the operators receives a command and
starts to move, the other operator is locked for this
time. The other operator can only be started after the
movement has stopped.
INFORMATION
Both operators cannot be operated at the
same time.
12.2 Installing the operators
The installation of the operators is described here using
an example.
1. Install the operators on the two doors as described in
the Chapter "6. Installation."
12.3 Selecting and configuring master
and slave
Requirements
Both operators are configured as a master in the factory
settings. The main communication with the control unit
is effected via the master.
INFORMATION
No automatic closing function and no
energy-saving mode are possible in twin
operation.
1. Set DIP switches 1 and 3 on the wall control unit to
"ON." This sets membrane keypad T1 for the master
and membrane keypad T2 for the slave.
T1
T2
Fig. Membrane keypad T1 and T2 of wall control unit
T1 for master
T2 for slave
GND
+24V
gn
rt
+
-
Fig. Connection of chain and track for both operators to the
control unit
Terminal block Function
gn + Track
rd - Chain
2. Connect the operator (1) to the terminal blocks for
chain (rd) and track (gn) of the wall control unit.
The connection cable must be firmly secured to
prevent displacement.
3. Connect the wall control unit to the mains voltage.
Check that the power supply is connected.
4. Configure the operator (1) as the slave. To do this,
establish a connection to the motor carriage via
SOMlink and a WiFi-enabled device.
5. In the menu, under the "twin operation" settings,
configure "Operator is slave" for the selected
operator and save the entry. Check the entry.
6. Disconnect the wall control unit from the mains
voltage.
7. Connect operator (2), the master, to the wall control
unit in parallel to the terminal block for chain and
track. The connection cable must be firmly secured
to prevent displacement.
8. Reconnect the control unit to the mains voltage.
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9110 pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9110 pro in de taal/talen: Engels als bijlage per email.

De handleiding is 10,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9110 pro

Sommer S 9110 pro Gebruiksaanwijzing - Nederlands - 88 pagina's

Sommer S 9110 pro Gebruiksaanwijzing - Deutsch - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info