680556
41
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
41
46900V001_Rev-D_EN
10. Connections and special functions of the motor
carriage
10.3 Reducing illumination power of
LEDs
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare. This may temporarily reduce
vision. This may cause serious or fatal
accidents.
Never look directly into an LED.
The illumination power of the LEDs can be reduced
during adjustment work by pressing the reset button or
radio button once briefly.
1. Press the radio or reset button once briefly.
Illumination power of LEDs reduced.
10.4 Explanation of the radio channels
LED Radio
channel
Setting/function
1 CH 1 Pulse mode
2 CH 2 Partial opening or lighting
function
3 CH 3 Defined OPEN
4 CH 4 Defined CLOSE
10.5 Programming the transmitter
RADIO
RESET
CH1
CH2
CH3
CH4
STATUS
ON
1
2
3
4
Fig. 1
INFORMATION
If no transmission command is received
within 30 seconds after pressing the radio
button, the radio receiver switches to
normal mode.
1. Press the radio button repeatedly to select the
required radio channel.
LED
1 x 2 x 3 x 4 x
CH 1
CH 2
CH 3
CH 4
2. Press the desired button on the transmitter until the
previously selected LED (CH 1, CH 2, CH 3, CH 4)
is off.
LED goes out - programming is complete.
The transmitter has transferred the radio code to
the radio receiver.
3. Repeat the above steps to program additional
transmitters.
INFORMATION
Further transmitters cannot be
programmed if all memory positions of
the handheld transmitter are occupied.
If the memory capacity has been reached
A total of 40 handheld transmitter commands are
available for all channels. If an attempt is made to
program additional transmitters, the red LEDs of radio
channels CH 1 - CH 4 flash. If more memory positions
are needed, see Chapter "10.6 Information on Memo".
10.6 Information on Memo
The use of the Memo depends on the version of the
motor carriage circuit board.
The memory capacity can be extended to 450 handheld
transmitter commands using the optional Memo
accessory part. When plugging in the Memo, all available
transmitters are transferred from the internal memory
to the Memo and stored there. The Memo must remain
plugged in on the control unit.
No more transmitters are stored in the internal memory.
Stored transmitters cannot be transferred from the Memo
back to the internal memory.
All radio channels, including the memory of the Memo,
can be deleted, see Chapter "10.11 Deleting all radio
channels in the receiver".
INFORMATION
Delete the Memo on a new operator.
Otherwise, all stored transmitters of
an operator are deleted and must be
reprogrammed.
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9110 base plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9110 base plus in de taal/talen: Engels als bijlage per email.

De handleiding is 8,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9110 base plus

Sommer S 9110 base plus Installatiehandleiding - Nederlands - 80 pagina's

Sommer S 9110 base plus Installatiehandleiding - Deutsch - 80 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info