680825
45
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
45
S10564-00001_Rev-A_EN
The carriage automatically moves briey in the
door OPEN direction to program the soft running.
The door automatically returns to the door
CLOSE end position.
The carriage automatically moves to the door
OPEN end position.
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
If a photo eye is connected, PHOTO 1 for door
CLOSE, the door automatically closes after the
open holding and clearing time run out.
INFORMATION
The carriage stops if the door is difcult
to move. The door mechanism must be
checked, see Chapter "9.3 Detecting
obstacles during force programming run".
It may be necessary to adjust the end positions.
See Chapter "9.4 Mechanical adjustment of the end
positions".
9.3 Detecting obstacles during force
programming run
If the door detects an obstacle during the door OPEN
and door CLOSE door movements and the force
programming run cannot be completed, the door stops.
NOTE
Check the movement path, mechanism,
spring tension and the weight compensation
to prevent damage to the door system.
1. Press the START IN button on the control unit and
keep it pressed.
The carriage jerks briey and moves in the door
CLOSE direction until the desired end position
has been reached.
2. Release the Start IN button.
3. Fine adjustment:
Press the START IN button on the control unit and
keep it pressed until the carriage jerks briefly.
Release the Start IN button.
9. Commissioning
3.1 The process can be repeated until the desired end
position is reached.
Press the START IN button on the control unit
briefly (< 1 second) to save the door CLOSE end
position.
The carriage starts the automatic force
programming run to the door OPEN end position.
The carriage starts the automatic door CLOSE
force programming run.
If an obstacle is detected again, the carriage stops and
reverses a short distance.
1. Press the START IN button on the control unit and
keep it pressed.
The carriage starts without jerking, because the
end position of door is already saved.
The carriage moves to the end position.
2. Release the START IN button on the control unit.
3. Briefly press the START IN button on the control
unit.
Restart automatic force programming runs.
On completion of the force programming runs the
carriage automatically moves to the door OPEN
end position.
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9060 Tiga bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9060 Tiga in de taal/talen: Engels als bijlage per email.

De handleiding is 28,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9060 Tiga

Sommer S 9060 Tiga Gebruiksaanwijzing - Nederlands - 96 pagina's

Sommer S 9060 Tiga Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info