680825
16
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
16
S10564-00001_Rev-A_EN
3. Description of function and product
3.3 Definitions
Programming
The operator programs the path and force required to
open and close the door.
The operator saves these values. The values are saved
even if the power supply fails.
Door OPEN
The door opens or is open.
Door CLOSE
The door closes or is closed.
Interior (IN)
This side is inside the garage.
Exterior (OUT)
This side is outside of the garage.
Light signal of the trafc light
Access authorisation for the interior and exterior is
displayed by the traffic lights.
Request side, interior or exterior
A command is given from this side.
Opposite side
This side is opposite the request side.
Command from the interior
Button or radio signal give a command to open the door
from the interior. After the lead time and, if applicable, the
clearing time, the red traffic light for the interior switches
off. This gives the authorisation for drive-through from the
interior. The opposite side gets the red phase.
Command from the exterior
Button or radio signal give a command to open the door
from the exterior. If the door is closed or is in the door
OPEN end position, the red traffic light for the exterior
switches off. This gives the authorisation for drive-
through from the exterior. The opposite side gets the red
phase.
Pre-warning time
This phase affects the time before opening or closing.
The traffic light flashes red on both sides. The warning
light and the operator lighting of the carriage also flash.
The operator movement is thereby announced. The door
area must be cleared.
Open holding time
The door remains open in this phase. The traffic light of
the request side is off. The traffic light lights up red on
the opposite side. The door can only be opened but not
closed by a command from a button or hand-held remote
control. While the door is being opened, it cannot be
stopped by a command.
Example: If a command is sent while the operator is
closing automatically, it opens completely and the open
holding time is reset.
Clearing time
This phase affects the time after the open holding time
has run out. The traffic light lights up red on both sides.
The operator lighting of the carriage also flashes. This
announces movement of the operator or traffic light
switch-over for changing the drive-through direction.
The door area must be cleared.
SOMlink
SOMlink makes it possible for qualified specialists to
change the functions and settings on the door operator.
These include force and speed values as well as
operating parameters and other convenient functions.
If you would like to make changes, contact your specialist
dealer.
Multi-function relay (MUFU)
The multi-function relay is a potential-neutral changeover
contact. The multi-function relay can be configured for
other settings using the SOMlink, a WLAN-enabled
device or a Memo tiga attached to the wall control unit at
the factory.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9060 Tiga bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9060 Tiga in de taal/talen: Engels als bijlage per email.

De handleiding is 28,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9060 Tiga

Sommer S 9060 Tiga Gebruiksaanwijzing - Nederlands - 96 pagina's

Sommer S 9060 Tiga Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info