680825
9
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
9
S10564-00001_Rev-A_EN
1.9 Improper use of the operator
Any other use or additional use that has not been
described in Chapter 1.8 constitutes improper use.
The user bears the sole responsibility for any risk
involved.
The manufacturer's warranty will be voided by:
damage caused by other use and improper use
use with defective parts
unauthorised modications to the operator
modications and non-approved programming of the
operator and its components
The door must not be part of a fire and smoke protection
system, an evacuation path or an emergency exit that
automatically closes the door in the event of fire.
Installation of the operator will prevent automatic closing.
Observe the local building regulations.
The operator may not be used in:
areas with explosion hazard
very salty air
aggressive atmosphere, including chlorine
1.10 Qualifications of personnel
People under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
After installation of the operator, the person responsible
for the installation of the operator must complete an
EC Declaration of Conformity for the door system in
accordance with Machinery Directive 2006/42/EC
and apply the CE mark and a type plate to the door
system. This also applies if the operator is retrofitted
to a manually operated door. All documents as well as
the inspection book for the door, the installation and
operating manual and the handover protocol must be
retained by the user.
The following is available for this purpose:
handover protocol for the operator
EC Declaration of Conformity
At:
http://som4.me/konform
Trained qualied specialist for installation,
commissioning and disassembly
This installation and operating manual must be read,
understood and complied with by a qualified specialist
who installs or performs maintenance on the operator.
Work on the electrical system and live parts may be
performed only by a trained electrician in accordance
with EN 50110-1.
The installation, commissioning and disassembly of the
operator may only be performed by a qualified specialist.
The qualified specialist must be familiar with the following
standards:
EN 13241-1
Doors and gates - Product standard
EN 12604
Doors and gates - Mechanical aspects -
Requirements
EN 12605
Doors and gates - Mechanical aspects - Test
methods
EN 12445 and EN 12453 -
Safety in use of power operated doors
A qualified specialist is a person ordered by the installer.
The qualified specialist must instruct the user:
on the operation of the operator and its dangers
on the handling of the emergency release
on regular maintenance and care which the user
can execute
The user must be informed that other users must be
instructed on the operation of the operator, its dangers as
well as the emergency release.
The user must be informed about which work must only
be performed by a qualified specialist:
installation
settings
regular maintenance
repairs
1. About this installation and operating manual
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9060 Tiga bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9060 Tiga in de taal/talen: Engels als bijlage per email.

De handleiding is 28,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9060 Tiga

Sommer S 9060 Tiga Gebruiksaanwijzing - Nederlands - 96 pagina's

Sommer S 9060 Tiga Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info