658839
10
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
Safety regulations - Starting the tool, When working with the saw
ENGLISH 10
E
N
G
2.8 Starting the tool
The power tool must only be started up if it is fully assembled.
When starting the tool, keep a minimum distance of 3 metres to where the tool was refuelled.
Never start the device in an enclosed room.
Make sure that you have a secure footing on firm ground when starting the tool. Always check that
the ground is level and keep a safe hold of the power tool.
Perform the start-up routine as described in chapter 5. "Starting the engine / stopping the
engine".
Once the unit has been started, check the idle setting. The cutting blade must be stationary
during idling.
Once it has warmed up, switch the engine off and recheck the chain tension and adjust as
required.
2.9 When working with the saw
The following safety rules must also be followed in addition to those already listed:
Check the operation of the chain brake every time before you start work (see Chapter 3.9, "Chain
brake").
Work on windfall must only be performed by trained persons.
As soon as the engine is running, it produces toxic exhaust gases which may be colourless and
odourless. Never start up the tool in enclosed spaces. Always make sure that there is sufficient air
exchange if you are working under restricted conditions, such as in a dip or a ditch.
Do not smoke at the place of work or in the close vicinity of the power tool, as this would be an
increased fire hazard.
Work carefully, deliberately and calmly and do not endanger the safety of others.
- Make sure that visibility and lighting conditions are good.
- Stay within calling distance of others who could help in the event of an emergency.
- Take breaks in good time.
- Be aware of potential sources of danger and take appropriate precautionary measures.
Remember that the use of ear defenders makes it more difficult to hear other sounds. This may
also mask sounds warning of imminent danger or shouts of warning etc.
- Remember that freshly debarked wood is very slippery (bark). Also take care in the wet, when
the ground is slippery, on slopes on uneven terrain.
- Look out for obstacles and hazards that could trip you up, e.g. tree roots, tree stumps and
edges. Take special care when working on slopes. Never work while standing on unstable
ground.
- Always hold the power tool firmly with both hands and make sure you have a secure footing on
stable ground at all times.
- Never use the saw above shoulder height and avoid leaning too far forward. Never use the saw
while standing on a ladder, and never climb the tree holding the saw. The only safe way to reach
greater heights is to use a hydraulic lifting cabin.
- Move the chainsaw in such a way that no part of your body would be in the way if the arc of
movement of the saw chain was extended.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solo 651SP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solo 651SP in de taal/talen: Engels als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info