655641
25
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
3 Preparing the device for use
ENGLISH 7
Model 425 Pro, 475 Pro:
The telescopic spraying tube can be adjusted in
length from 50 cm to 90 cm. For this, release the
fastening nut (l) a little, pull out our push in the
inner tube accordingly and fasten at the desired
length by tightening the fastening nut (l).
Pro:
Standard nozzle: high-spray nozzle, adjustable,
brass, order no.: 4074501
Alternative nozzle: flat-spray nozzle 02-F80, brass,
order no.: 4900504
3.2 Spray nozzle, filter element and
filling strainer
A filter element is fitted in the nozzle attachment (f)
upstream of the spray nozzle (mesh aperture:
0.8 mm [0.031"], part no.: 407492225).
Alternatively, the ball valve filter offered in the
accessories with order no.: 4900539, mesh width
0.35 mm can be used.
The backpack sprayer is equipped with a filling
strainer located in the filler neck of the spraying
agent tank (mesh aperture: 2.0 mm [0.079"], part
no.: 420016625).
Use of a genuine filter named above and the
original filling screen, each with the indicated mesh
widths in impeccable conditions is prescribed when
working with the back spray.
In addition to the spraying nozzles listed in chap. 9,
spraying nozzles with a collar height of 2 mm and a
collar diameter of 15 mm with fixed application
quantity, spraying angle and spraying pattern can
be used as well.
Changing spray nozzles and filter element:
See section 6.4
3.3 Trial run
At the start of the spraying season and in frequent
use at least once a month, perform a trial run
according to section 6.2 to check the entire device.
3.4 Carrying straps
The carrying belts can be adjusted to the required
length with clamp sliders.
(schematic diagram / depending on the model)
Pull the loose ends of the carrying straps to tighten
the carrying straps.
(schematic diagram / depending on the model)
Lift up the two sliding clips again to release the
carrying straps.
3.5 Pressure adjustment
The pressure is
adjusted prior to
filling the tank by
turning the adjuster
cap (m) on top of the
pressure tank. Press
down the adjuster
cap and locate the
selected pressure
marker tooth over the tooth on the pressure tank.
Model 425 Comfort, 425 Pro, 435 Comfort:
Should spray pressure in excess of 4 bar [58 psi]
be required we recommend to replace the pressure
valve with the pressure plug (n) (part no.: 4200215)
which is supplied with the unit. Release any
pressure in the pressure tank first before replacing
the valve.
A spanner width of 24 mm is required.
Fig. 22 - Pro
Fig. 23
Fig. 24
425 Comfort,
425 Pro,
435 Comfort
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solo 475 Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solo 475 Pro in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info