45
If you press the touch button
you will hear a
“DO”. This means that your appliance has started
moisturising. The atomization level is at the low-
est setting after the appliance is plugged in and
switched on.
If you press the touch button
for a second
or longer you will hear a musical sequence of
“DO RE MI FA SO LA SI DO” in 0.5Hz. This se-
quence means that the atomization level rises
even higher. The musical sequence means this:
from the first DO (lowest atomization level) to
the last DO (highest atomization level) the Va-
po-Flûte will run through a complete cycle. If
you continue holding the button
or press it once again for a second
or longer, the musical sequence changes to “DO SI LA SO FA MI RE DO”
which means that it will go from the highest atomization level downwards
to the lowest. Along with the musical sequence, the indicator light will
change through different shades of colour, from blue (lowest atomization
level) to white (highest atomization level) or vice versa. This allows you to
acoustically and visually identify the atomization level.
3. SWITCHING APPLIANCE TO STAND-BY MODE
While the Vapo-Flûte is in operation and you press the touch button
a short
time (up to a second long), you will hear the musical sequence “MI RE DO”
play quickly, then it will stop. The indicator light goes out and the appliance is
in standby mode.
4. MEMORY-FUNCTION
The appliance has a memory function. It will remember the last settings if you
switch off the appliance, but do not unplug it. If you switch the appliance on
again, it will start at the last atomization level set. If you unplug the appliance
it will begin at the lowest setting, the memory function is cleared.
