484736
29
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
29
USING THE KETTLE
If you are using the kettle for the first time, or after a long interval, please fill it with water up to the
«MAX» mark and bring it to the boil. Pour the water away, refill the kettle with water and bring it to the
boil again, so that any particles of dirt that may be present inside the kettle are removed. Do not drink
this water.
1. Opening the lid
When you press the button integrated into the handle, the lid will open automatically.
2. Filling with water.
Take the kettle off the base station to fill. When you fill it with water, make sure that the level does not
fall below the «MIN» mark or rise above the «MAX» mark. Close the lid and place the kettle back on the
base station.
3. Temperature display
Once the water jug is placed on the base station and the plug is connected to the mains electricity supply,
the letter «C» will blink in the display. This means that the temperature will be indicated in degrees Celsius.
After a short time, the water temperature will appear on the display in degrees Celsius. If the appliance is
plugged in when the water jug is not on the base station, the letter «E» will appear in the display.
4. Modes of operation
ON/OFF button: if you operate the ON/OFF-switch in the normal Standby mode, the water will heat up
until it reaches 100° C. The kettle will then switch off automatically. An acoustic signal indicates the end
of the boiling process.
If you press the ON/OFF button while the kettle is heating up, the appliance will return to the Standby mode.
PROGRAM button: Press the PROGRAM button to change the temperature setting in any operating
mode. You can choose between the following temperatures:
40° C indicated by the illuminated spot in the top left hand corner of the display
60° C indicated by the illuminated spot in the top centre of the display
80° C indicated by the illuminated spot in the top right hand corner of the display
90° C indicated by the illuminated spot in the bottom right hand corner of the display
100° C indicated by the illuminated spot in the bottom centre of the display
Keep warm indicated by the illuminated spot in the bottom left hand corner of the display
The corresponding temperature will also be indicated in the display, depending on the selected programme.
After 3 seconds, the display will show the current temperature. After selecting the programme, press
the ON/OFF to start heating the water. The illuminated LED spot indicates the relevant programme and
you will be able to read the current water temperature off the display. The appliance will then switch off
completely when the water has reached the set temperature (except in the case of the “Keep warm”
programme).
After the kettle has switched off, the LED light on the display will flash on the selected programme. When
you press the ON/OFF button again, the LED point lights on the selected programme until you change it.
Solis_DigitalKettle-Betriebsanleitung.indd 29 16.02.11 18:01
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solis TIPO 558 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solis TIPO 558 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 4,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info