56
▲
BLENDING WITH THE BLENDER CUPS
1. Unscrew the blade base from the cup and turn the cup upside down, so that the
opening points upwards.
2. Fill the ingredients into the blender cup and, in any case, pay close attention to
the MAX marking (500 ml resp. 700 ml in the mega large cup). Under no cir-
cumstances exceed this marking.
3. Screw the blade base back onto the blender cup by giving it a quarter turn in a
clockwise direction. The blade base must be screwed on all the way to prevent
the contents from escaping.
Caution: The blender will only blend if the motor base has been correctly
screwed onto the cup. This will unlock the safety switch.
4. Place the blender cup in the motor base with the blade base facing downwards.
The arrow on the blade base should line up with the arrow on the motor base.
5. Plug the power plug into a suitable power socket.
6. Turn the blender cup with the blade base in a clockwise direction to the LIQUIFY
position and blend for a maximum of 60 seconds, until the desired consistency
has been reached. Then, turn the blender cup with the blade base in a counter-
clockwise direction until both arrows are lined up again (OFF position). The motor
stops.
Caution: Blend for a maximum of 60 seconds, then let the motor cool down for
2 minutes.
7. If you want to activate the PULSE function, turn the blender cup briefly to the
LIQUIFY position and then back to the OFF position (both arrows line up).
Repeat this multiple times and the motor will be switched on and off at short
intervals.
8. When the blending process has been completed, turn the blender cup to the OFF
position (both arrows line up). Wait a few seconds for the blades and the motor
to come to a full stop and pull the power plug. Remove the cup from the motor
base. Turn the cup upside down and wait for the contents to run off the blades
into the cup. Then, unscrew the blade base from the cup in a counter-clockwise
direction.
9. If you want to drink the beverage directly from the cup or take it with you, screw
the drinking lid onto the cup. You can comfortably drink from the sealable drink-
ing opening.
If the blender is not in use or before it is disassembled, cleaned or stored, it always
has to be unplugged.
SOLIS Power Blender TO GO-E_2016 27.06.16 17:39 Seite 56
