SOLIS MASTER 5000 DIGITAL User’s manual
Cold weather/Frost: The appliance must be
protected against frost and should not be left
overnight in a car during winter.
3.1 The bean container is fixed with two
screws. Remove cover and fill container with
fresh coffee beans (approx. 300 g). At the
same time, make sure that the grinder
adjustment knob (8a) is set to position 8 (+/- 2).
Properly close the bean container with the cover.
3.2 Remove the water reservoir. Remove
the cover and fill reservoir with cold water
(max. 1,8 litres). Then replace reservoir on
machine. With slight pressure make sure that the
valve at the bottom of the reservoir is properly
placed. Replace cover.
Caution: Use only fresh, cold water. Never use
carbonated water, milk or any other liquid.
3.3 Pull the power cord from the back of
the machine to the desired length (the rest
of the power cord stays in the cord container).
Connect the plug to an earthed socket.
3.4 Press the main ON/OFF switch. After the
automatic self-test, the
WWAARRMMIINNGG UUPP......
indicator will appear in the display.
3.5 Priming the system
Place a suitable container underneath the steam
and hot water nozzle. Open the steam/hot water
knob until a steady stream of water is dispensed.
Close the steam/hot water knob. The machine
has now been primed.
60
3.0 Starting up/First usage
Prior to starting the appliance, please carefully review the safety instructions
mentioned under Pt. 1.0.
The appliance should never be used without water or without coffee beans.
Remove key for brewing unit and cleaning brush from the container for waste
coffee (7). Retain key and brush for future use.
