▲
AFTER USE
• If you want to fully deactivate the appliance, always touch the "power" button
(16) before disconnecting the power cord from the power socket resp. the appli-
ance.
• If you do not want to use the appliance for more than 2 days, we recommend
pouring out the water in the water basin and drying the water basin with a dry
cloth as well as letting the humidification plates air-dry with the appliance
opened.
• In general, we recommend always pouring the water remaining in the
water basin away before refilling fresh water.
• Important: Before pouring away the water, always remove the humidifi-
cation plates as well as the Solis Ionic Silver Stick from the basin.
8382
▲
OPERATION
If the water basin is filled to the MAX marking (see point 26 on page 71 of this
manual) with fresh tap water and the appliance is correctly assembled and con-
nected to the power, you can start using it.
1. SWITCHING THE APPLIANCE ON
Touch the "power" button to switch the appliance on. The current humidity will
illuminate in the control panel, also "CURRENT HUMIDITY" and "LOW" for low
humidity, "LOW + MID" for intermediate humidity or "LOW, MID + HIGH" for
high humidity.
2. CHOOSING FUNCTIONS
Choose the desired functions. Set humidification power with the "speed" but-
ton. If you wish, activate the ion, night and light functions. If needed, set the
operation time with the "timer" button. The child safety mode can also be acti-
vated.
• In general: The higher the room temperature is, the faster the humidification will
be.
• NOTE: Should you lift the appliance top and separate it from the water basin,
the appliance will automatically stop. Only after the appliance top has been prop-
erly replaced on the water-filled water basin the appliance will reactivate.
• The appliance will also switch off if the water basin is no longer filled with enough
water. In this case, the display (5) illuminates and the appliance switches off.
• Before refilling the appliance with water, please always switch the appliance off
with the "power" button (16) and pull the power plug from the power socket
resp. the connection adapter from the appliance jack first. Then, use both
hands to lift off the appliance top. Fresh tap water can now be refilled. Please
make sure that the water level does not exceed the MAX marking (see point 26
on page 71 of this manual).
