610625
11
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
11
SELECTING THE TEMPERATURE
To change the temperature selection, press the temperature button (4.6);
you can increase the temperature position by pressing the selection increase
button (4.8). If a position higher than 1 is selected, you can reduce the
temperature position by pressing the selection reduction button (4.9).
To confirm your selection, press the temperature button again (4.6) or else
it confirms automatically after a few seconds. The temperature that corre-
sponds to the selected temperature position appears on the screen when
you confirm the selection (4.2).
There are 4 temperature positions that correspond to the following tem-
peratures:
Position 1: 30ºC
Position 2: 35ºC
Position 3: 40ºC
Position 4: 45ºC
The selected temperature will be reached after 10 minutes and it will remain
stable after this time regardless of how long the appliance is left running.
SELECTING THE OPERATING TIME
When the appliance is switched on, the time selected by default before the
product switches off is 120 minutes. It is possible to reduce this time by
pressing the timer button (4.7) and then pressing the selection reduction
button (4.9). If a time of less than 120 min. is selected, you can use the
selection increase button (4.8) to increase the time before the appliance
switches off automatically.
From 10 to 50 minutes, these buttons allow you to increase/reduce the time
by five minutes every time they are pressed. After 50 minutes these buttons
change the time by 10 minutes.
To confirm your selection, press the timer button again (4.7) or else it confirms
automatically once a few seconds have passed since your last selection.
When you confirm the selection, the selected time appears on the screen
(4.5) and the time starts to count down one minute at a time; this also ap-
pears on the screen (4.4).
Once the selected time has passed, the appliance stops heating up, the
screen shows the FF symbol and the light on the control flashes until any
button is pressed.
If any operating error is detected or the power cord is not properly con-
nected to the product, the screen shows the ER symbol and the light
flashes. Make sure the cord is properly connected, switch off the control and
switch it back on.
The light of the screen is blue; it comes on while the control is being used
and switches off automatically after 5 seconds. If you want it to light up
again, press the selection increase button 4.8 or the selection reduction
button 4.9.
CT8630-8635-8650 11 10/10/06, 10:18:17
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solac CT8630 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solac CT8630 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info