488728
13
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
CLEANING AND CONSERVATION 13
en
SAFETY THERMOSTAT
The system has a safety thermostat. If for any reason the vacuum cleaner should overheat,
the thermostat will automatically shut off the appliance. If this should happen:
1 Press the on/off switch (5) and unplug the appliance from the mains.
2 Check that the air intakes and outlets are not blocked. If they are blocked, get rid of
the cause of the blockage.
3 Empty the dust container (outer and inner chamber). See the next section “Cleaning
and Conservation”.
) If the automatic shut-off was due to the motor overheating, wait for about one hour for
the appliance to cool before turning it on again. You can reduce the waiting time by
placing the appliance in a cool or well-ventilated place to allow the heat to dissipate.
CLEANING AND CONSERVATION
EMPTYING THE DUST CONTAINER (19)
) The dust container (19) has a maximum level mark. Check the dust does not exceed
that level.
1 Turn the carry handle (15) backwards to make the dust container (19) accessible.
2 Press the release button (24). This releases the dust container. (fig. 4).
3 Remove the dust container and hold it over the waste bin. Press the button (23) on the
container (fig. 5) to empty the contents into the bin.
4 Turn the dust container cover (21) anti-clockwise and remove the inner chamber (20)
(fig. 6). Empty the contents.
5 Clean the inner chamber (20) and dust container with a brush and wet cloth.
) Check that the washed elements are completely dry before putting them back
together.
) Never immerse the inner chamber in water or any other liquid, nor put it in the
dishwasher. Do not use abrasive products or solvents.
6 Put the inner chamber back into the container (check that the marks coincide).
7 Place the container cover (21) on the mark and turn it clockwise to the mark .
8 Put the dust container back inside the appliance. Push the container towards the
appliance body while pressing the release button (24). This blocks the container.
CLEANING THE MOTOR PROTECTION FILTER (26)
) It is advisable to inspect the motor protection filter from time to time, to ensure that it is
operating correctly.
) Once or twice a year, or if a reduction in suction power is detected, clean the protection
filter. To do so:
1 Remove the dust container. See the previous section “Emptying the dust container
(19)”.
2 Remove the filter cover (25) by pressing the upper tab. Remove the grille (27) (fig. 7).
3 Remove the protection filter (26) from the grille (27) (fig. 7).
4 Wash the filter with tap water and leave it to dry completely.
) The filter can be washed with warm water (max. 40 ºC). Leave it to dry for 24 hours
before replacing it.
5 Put the grille and motor protection filter back in their housing.
) Never use the vacuum cleaner without the motor protection filter.
AS3260.book Page 13 Thursday, January 14, 2010 1:29 PM
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solac AS3260 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solac AS3260 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info