792769
14
Verklein
Vergroot
Pagina terug
1/138
Pagina verder
12
7. Daily use and operation
PM 2,5 sensor and LED ring
The current air quality is continuously determined
by Airfresh Clean 400 in the form of the PM 2.5
value.
The PM 2.5 value is the fine dust load
(50% of particles approx. 2.5μm) in μg/m
3
.
The illuminated LED ring on the upper side
indicates the current level of fine dust pollution
caused by different colours:
RED = high load (>50 µg/m³)
PINK = medium load (20 - 50 µg/m³)
LILA = low load (10 - 20 µg/m³)
BLUE = no load (0 - 10 µg/m³)
Please remove the protective ap in front of the PM2.5 sensor
(C) only in an emergency. Please do not allow any objects or
other foreign bodies to come into contact with the sensor.
Switching on and off
Press the ON/OFF button (L) to turn the
Airfresh Clean 400 on or off. The ON/OFF
control lamp lights up.
First press:
Device is switched on
Press twice:
Activates the automatic mode
Press the third time:
Deactivates the automatic mode.
Press four times:
Device is switched off
The control lamps light up accordingly.
Automatic mode
By pressing the (L) button as
described
above, the Airfresh Clean 400 is also set to
automatic mode. In this mode, the unit
automatically adjusts the fan speed in
relation to the air quality in the room. This
ensures you always get the best possible
air quality. The control lamp for AUTO
lights up.
Setting the operating time
Press button (I) to set the desired oper-
ating time. Choose between 2, 4 and 8
hours. The control lamp lights up ac-
cordingly. The device switches off auto-
matically after the time has elapsed. If
no operating time has been selected
(no indicator light is lit), the Airfresh
Clean 400 runs in continuous operation.
Changing the fan speed
Press button (K) to select the fan speed
and thus the desired intensity of air
discharge:
Low (I) - Medium (II) - High (III) -
Turbo (all indicator lights on)
UV-C lamp and night mode
Press button (J) once to switch on the
UV-C lamp inside the Airfresh Clean 400
(UV-C control lamp lights up). Press again
to activate the night mode without
switching off the UV-C lamp (UV-C con-
trol lamp lights up, NIGHT control lamp
flashes). By further pressing button (J)
you can switch off the UV-C lamp (UV-C
control lamp is off, NIGHT control lamp
flashes) or switch both off (UV-C control
lamp is off, NIGHT control lamp is off).
Night mode
In night mode, you can run the Airfresh
Clean 400 without being disturbed by
additional light sources. If you activate
the night mode, all indicator lights
on
the device are switched off after 10 sec-
onds without the device being switched
off. Previously made settings for operat-
ing time and fan speed are retained. The
activation of the night mode is initiated
by a flashing of the control lamp before
GB
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soehnle 68122 - Airfresh Clean 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soehnle 68122 - Airfresh Clean 400 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2.32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info