792757
15
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
14
GB
A. Operating elements
1. Minus ( )
2. Confirm ( )
3. Plus ( )
B. Preparation
1. Insert batteries (3 x 1.5 V AAA).
Note:
Immediately (as long as "0.0" is still being dis-
played) place the body analysis scale on a lev-
el surface and wait until the scale powers
down automatically.
Then begin with data entry. Otherwise, it might
be possible that the weight of the scale would
erroneously be added to the initial weighting
process.
The same might occur during regular opera-
tion if the scale is held in the hand prior to the
weighting process.
2. For all measurements, place scale level on a
hard surface (not on carpet).
3. Cleaning and care: Clean only using a slightly
damp cloth. Do not use solvents or abrasives.
Never submerge scale in water.
4. A country-specific option to switch from kg/cm
to st/in or lb/in is possible by pushing the key
on the bottom of the scale to switch units
Attention! Slipping hazard in
case of wet surface.
C. Data input
1. Press button.
2. Use / buttons to select memory slot and
confirm with . P
3. Use the / buttons to set your height and
confirm with . H
4. In the next step, set your age and confirm
with . A
5. Set gender and confirm with . (Hold down
key for 3 sec.). S
6. Now immediately place the body analysis
scale
on the floor, wait until the screen displays "0.0"
and then step on the scale with bare feet.
The initial measurement is indispensable and
serves to store the data for later automatic
recognition of persons. If no person steps on
the scale, data input must be repeated. The
first body analysis is performed after a person
steps on the scale.
This scale is equipped with a Time-Out mode.
It will automatically switch off after approx. 40
seconds if no keys are pressed.
Alternative:
You can also perform this step conveniently via
the
Soehnle Connect app, in which case the data is
transferred to the scale. The first measurement is
necessary, however. Once you have entered the
data on the scale for the recognition of persons as
described under C, the Soehnle Connect app will
automatically adopt this.
D. Body analysis
1. Place scale on a solid, level floor and wait until
scale switches off automatically.
Step on the scale with bare feet. Stand still.
2. Body weight and the other calculated data are
displayed.
3. If the calculated values cannot be clearly allo-
cated to one user, the possible memory slots
will be displayed.
If the calculated weight can be allocated to more
than 2 users, other possible memory slots will
be displayed after 3 seconds.
Use the / keys ( = left, = right) to confirm
the memory slot displayed there.
The scale measures the individual body values
by means of bioimpedance analysis (body fat
percentage, body water, muscle mass), calcu-
lates the basic metabolic rate per day (kcal)
and the BMI (Body Mass Index).
The scale switches off automatically.
Note: If needed, the user can step off the
scale
as soon as the first value appears on the dis-
play.
Interpretation of measured values
In order to be better able to assess your measu
red
values, at the front of this operating manual you
will find an overview table, from which you can
take the commonly accepted optimal values.
The optimal range is marked in the table with a
J. Values outside this range are either too low (–)
or too high (+/++).
15

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Soehnle-63879---Shape-Sense-Connect-50

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soehnle 63879 - Shape Sense Connect 50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soehnle 63879 - Shape Sense Connect 50 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info