809888
60
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
60
v1.03
M215SC User Manual Appendix 1 - Base Station Settings
- The table always displays the maximum six accounts, even if there are fewer SIP accounts enabled.
- If you have not entered any unique handset names yet, then the default name of "HANDSET"
appears.
- On the Account Assignments table, you can select which accounts will be available for both
incoming and outgoing calls on each handset.
- The handset will rst attempt to use the account you select under Default when going o-hook.
Handset Name.
- On the Handset Name page, you can enter a name for each handset. The handset name will be used
throughout the web user interface and will appear on the handset's idle screen.
- The handset name is limited to a maximum of 11 characters.
- The default name is "HANDSET". Blank name elds are not allowed. If you click Save when any
elds are empty, an error message appears.
Network Settings
Basic Network Settings
Basic Network Settings Description
DHCP DHCP is selected (enabled) by default, which means the phone will get its IP address,
Subnet Mask, Gateway, and DNS Server(s) from the network. When DHCP is disabled,
you must enter a static IP address for the phone, as well as addresses for the Subnet
Mask, Gateway, and DNS Server(s).
Static IP When Static IP is selected, you must enter a static IP address for the phone, as well as
addresses for the Subnet Mask, Gateway, and DNS Server(s).
IP Address If DHCP is disabled, enter a static IP address for the phone.
Subnet Mask Enter the subnet mask.
Gateway Enter the address of the default gateway (in this case, your router).
Primary DNS If DHCP is disabled, enter addresses for the primary and secondary DNS servers.
Secondary DNS
Advanced Network Settings
VLAN Settings Description
Enable LAN Port VLAN Enable if the phone is part of a VLAN on your network. Select to enable.
VID Enter the VLAN ID (vlan 5, for example).
Priority Select the VLAN priority that matches the Quality of Service (QOS) settings that you
have set for that VLAN ID. Outbound SIP packets will be marked and sent according to
their priority. 7 is the highest priority.
LLPD-MED Settings Description
Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED). LLDP-MED is a standards-based discovery protocol supported on some
network switches. It is required for auto-conguration with VLAN settings.
Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds).
802.1x Settings Description
Enable 802.1x Enables or disables the 802.1x authentication protocol. This protocol allows the
phone to attach itself to network equipment that requires device authentication via
802.1x.
Identity Enter the 802.1x EAPOL identity.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snom M200SC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snom M200SC in de taal/talen: Engels als bijlage per email.

De handleiding is 7.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Snom M200SC

Snom M200SC Gebruiksaanwijzing - Deutsch - 75 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info