785804
17
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
14
4. Charging the batteries
4. 1 Charging the drive unit battery
First read the safety instructions for the charger and the charging procedure in chapters
11.3 and 11.4 before charging the SMOOV O10 battery for the first time. With regard to
the charging process, proceed as follows:
Switch the control unit to standby mode (see chapter 3.6.1).
Switch the drive unit system off completely (see chapter 3.6.1).
Plug the power cable [19] of the charger into a socket. The LED [21] lights up blue;
the LED [20] lights up orange.
Insert the charging plug [18] into the charger socket [1]. The correct positioning and
locking of the connection occurs automatically via a magnetic closure.
The start of the charging process is now signalled by two brief acoustic signals.
During the charging process, the displays [2] (drive unit) and [12] (control unit (only if
switched on)) indicate the current charge status of the drive unit battery as follows:
LED [a] flashes: Battery capacity < 10%
LED [a] lights up: Charge status > 10%
LED [b] lights up: Charge status > 20%
LED [c] lights up: Charge status > 40%
LED [d] lights up: Charge status > 60%
LED [e] lights up: Charge status > 80%
If the control unit is switched on, LED [f] continuously indicates the remaining battery
capacity of the control unit.
The battery should always be fully charged. However, the charging process can be inter-
rupted or terminated at any time if necessary.
When the charging process is complete, you must first disconnect the charging plug [18]
from the charger socket [1], then disconnect the power cable [19] of the charger from
the socket.
Attention: The drive unit is switched on after the charging process.
Displays on the charger
The status of the charger is indicated by its LEDs as follows:
LED [21] blue, illuminated Charger is ready for use
LED [20] green, flashing Charging
LED [20] green, illuminated Charging is complete
LED [20] red, illuminated Error
The drive unit is switched on following completion of the charging
process.
Only the Alber charger supplied with the SMOOV O10 is to be used to
charge the drive unit. The use of a charger not supplied by Alber is not
permitted.
Ensure that the charger plug [18] and the charger socket [1] are clean
and that there are no metallic particles. If there are any metallic
particles, remove these with a clean, dry cloth.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Smoov-One-O10

Zoeken resetten

  • Heb sedert 1 maand een Alber Smoov One 010 maar kan aandrijvingsunit niet meer uitschakelen , wat ik ook probeer lichtjes accu blijven branden en hoe dit oplossen ? Hulpmotor werkt perfect , de app met Bluetooth werkt perfect anderzijds heel tevreden omtrent ontspannend rijden maar is nieuw en reeds defect , dat is balen want ondersteuning kwijt met spierziekte terug tussen 4 muren mijn kas opvreten zoals erger je niet ! Gesteld op 29-5-2023 om 08:51

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smoov One O10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smoov One O10 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Smoov One O10

Smoov One O10 Gebruiksaanwijzing - Nederlands - 36 pagina's

Smoov One O10 Gebruiksaanwijzing - Deutsch - 36 pagina's

Smoov One O10 Gebruiksaanwijzing - Français - 36 pagina's

Smoov One O10 Gebruiksaanwijzing - Italiano - 36 pagina's

Smoov One O10 Gebruiksaanwijzing - Espanõl - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info