686773
18
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
20
20 / EN
Delayed Start Time (Automatic cooking)
1. When PT1 is pressed to define a delayed start
time the corresponding light starts to blink,
DSP1 shows the current time and DSP 2
shows “Auto”.
2. Turn PT1 to the right or left to change the
delayed start time.
3. Press PT2 to validate the delayed start time.
4. The oven enters in an idle state waiting for the
defined start time. DSP3 shows the selected
function and DSP1 and DSP2 show all the
defined parameters for the function
continuously alternating.
5. If you wish to start the function before the
selected time, just press PT2.
6. If you wish to cancel the programming, press
PT2 for 3 seconds.
3.8. When the oven is working…
Interrupting a cooking cycle
You can stop the cooking process at any time by
pressing the Start/Stop key once or by opening the
oven door. In both cases:
Microwave emission is stopped
immediately.
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
Turn or stir the food to ensure it will be
evenly cooked.
Modify the process parameters.
Cancel the process by pressing PT2 for 3
seconds.
To restart the process, close the door and press
PT2.
Modifying parameters
The operating parameters (time, weight, power,
etc.) can only be modified when the cooking
process has been interrupted. Proceed as follows:
Press PT1 approximately 5-6 seconds to
activate the parameter modification mode.
The symbol starts to blink. Turn PT1 to
the right or left to change the remaining
cooking duration.
Press PT1 for 3 seconds to validate and the
next parameter light starts to blink. Proceed
as described in the active function chapter to
modify the remaining parameters.
Press PT2 to continue the cooking process.
Cancelling a cooking cycle
1. If you wish to cancel the cooking process,
press PT2 for 3 seconds.
2. You will then hear a beep and the oven returns
to the OFF setting.
End of a cooking cycle
At the end of the process you will hear three beeps
and the display will show the word “End”.
The beeps are repeated every 30 seconds until
the door is opened or PT2 is pressed. The oven
returns to the OFF setting
Use
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smeg MP822 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smeg MP822 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info