672731
9
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Remote View Door Phone
Installation and Operating Instructions
Model: RVDP-GS
Version 1.0
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
The state of art Remote View Door Phone (RVDP) is capable of deliver High Denition (HD) video
to your smart-mobile device(s)
,
which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the Remote View Door Phone (RVDP).
* Make sure your RVDP is operating with sufcient internet bandwidth; 1Mbps (upload/download
speed) are suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed. Actual performance will depend on the location
internet environment.
* When the internet transmission is insufcient, your RVDP will automatically switch to Relay
Mode:
By adjusting to “Better Streaming” in the system setting section may improve
the WAPP APP performance.
* If your internet bandwidth is limited, for best performance try to avoid more than two
users connecting to the RVDP simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz
dual core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
Change router/camera relative position to receive better signal.
Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi router.
Switch your router to
11b/g/n mode in order to improve router service range.
Purchase extension cable or high gain antenna for your camera from the WAPP vendor.
* Please make sure the memory card used is CLASS10 rated.
1
CONTENTS
INTRODUCTION .............................................................................................. 2
IMPORTANT SAFETY PRECAUTIONS .....................................................................2
KIT CONTENT ................................................................................................. 4
KNOWING YOUR DEVICES ............................................................................ 5
HARDWARE OVERVIEW ........................................................................................5
REMOTE VIEW DOOR PHONE SETUP & INSTALLATION ...................................... 6
OPERATION DIAGRAM ........................................................................................... 7
APP DOWNLOAD AND INSTALL ..............................................................................8
MAIN PAGE OVERVIEW ................................................................................ 11
ADD RVDP .............................................................................................................12
SETTING................................................................................................................12
SETUP PIN LOCK ..................................................................................................13
NOTIFY (PUSH NOTIFICATION) ............................................................................13
VISITOR CALL-IN PAGE ........................................................................................15
ANSWERING A CALL .............................................................................................16
SETUP THE RVDP ......................................................................................... 17
ADDITIONAL WIRING DIAGRAMS .........................................................................18
MOUNTING THE DOOR UNIT ................................................................................19
PRODUCT SPECIFICATION .......................................................................... 20
2
INTRODUCTION
I
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
We will
not assume any liability for damages to items or persons caused by improper
handling or non-
compliance with the safety notices! Any warranty claim will be null and
void in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be
voided.
2. Avoid all contact with water, and dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing
so
may
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when there
is
a
storm or
lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out of
the reach
of infants.
10. Check power cables, do not get crushed or damaged by sharp edges whenever the
devices are
in operation.
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there is
perceived
policy. Enquire relevant local regulations applicable to the lawful installation
of video recording/
surveillance. Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possible
reception
between the camera(s) and the Wi-Fi router. If necessary, reduce the
distance between the
camera(s) and the Wi-Fi router to improve overall system
performance. Wireless Color Camera
Recordable CCTV Kit operating on a secure
digital 2.4GHz frequency which could greatly
reduce interference from product such
as wireless routers, cordless phones or microwave
ovens.
3
FCC / CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part
15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide reasonable protection against
harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does interference to radio or television equipment
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Move the equipment away from the receiver.
•
Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for additional
suggestions.
You are cautioned that any change or modifications to the equipment not expressly approved by the party
responsible for compliance could void your authority to operate such equipment.
DISPOSAL
If the camera system no longer functions or can no longer be repaired, it must be disposed of
according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators.
Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators
that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is
prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the respective
heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that
can no longer be charged to the designated collection points in your community, outlets or wherever batteries or
accumulators are sold. Following these instructions will allow you to fulll the legal requirements and contribute to
the protection of our environment!
FCC Compliance Statement: This
device complies with Part 15 of the
FCC rules. Operation is subjected to
the following two conditions: (1)
this
device may not cause harmful interference,
and (2) this
device must accept any interference
received, including
interference that may cause
undesired operation.
Products with CE Marking comply with
EMC Directive (2014/30/EU); Low
Voltage
Directive (2014/35/EU);
RED(2014/53/
EU); ROHS Directive
(2011/65/EU) issued
by the Commission of the
European Community.
Compliance with these
directives implies conformity
to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
CAUTION
This product is designed with built-in high sensitivity microphone. Please keep the door unit away from
the answering unit at least 3 to 5 meters, otherwise continuously howling will occur. Please volume
down if short distance use is needed.
Do not insert or remove SD Card when the system is in operation. This may cause system malfunction.
It is strongly recommended to format the SD card before rst use.
4
KIT CONTENT
Note:
For video recording, BE SURE TO use CLASS 10 memory card or above
.
Other
kinds of memory card may cause
unexpected results and should be avoided.
RVDP
x 1
Wall-Bracket
x 1
DC Power Cable
x 1x 1
Power Adapter
Black
Red
Lock/Gate Cable
x 2
Bell cable
x 1
White
Blue
Black
Black
Screw Pack
x 1
x 1
Quick Start Guide
5
HARDWARE OVERVIEW
1. RX+/RX-/TX+/TX-: Ethernet Cable I/O*
2. V-/V+: Power Input I/O
3. O2/O1: Wet Contact I/O
4. B2/B1: Bell Contact I/O
5. C2/C1: Dry Contact I/O
*Ethernet cable not included in the package.
Camera with
IR-Cut
Sunshade Mounting
Bracket
Memory Card Slot
Reset Button
Weather Resistant
Spearker
Motion Sensor
Push Button
Microphone
1 2 3 4 5
6
REMOTE VIEW DOOR PHONE SETUP & INSTALLATION
BEFORE YOU START
Do not mount the RVDP until completing the Wi-Fi connection setup.
First connect power to the RVDP using the supplied Power Input Cable to 9-36V power
source.
After connecting power to RVDP, the boot up process will begin (> 2 minutes), the red/green
LED will become steady on after the boot up process is complete (check connectors and
power source if red/green LED do not come on).
Memory Card Slot
I/O Pin
Power cable
Connector
7
OPERATION DIAGRAM
The Remote View Door Phone (RVDP) is designed to deliver live video directly to your smart
mobile devices after visitor have pressed the communication button on the door unit. The RVDP
app will allow you to see live video, speak to the visitor, manually capture snapshot/video and even
open the door (3rd party door lock device required) for the visitor.
Receiving Notication
Live-Video w/Incoming Audio
Two-Way PTT Audio
Video Event List
Remote Door Unlock Trigger
(3
rd
party device)
JSW Connectivity Server
Field Proven Secure Technology
• Push Notication Management
• Direct/Relay Connectivity Management
1
2 3
3
rd
Party Gate
Open
Trigger
3
rd
Party Door
Unlock
Trigger
Connection with
Wi-Fi Network
Wi-Fi Router
3
rd
Party Door
Chine
Cable Connection
Activate Doorbell Music & App
Notication Alert
Auto Visitor Video Record
Visitor Door Press
8
APP DOWNLOAD AND INSTALL
- Please download and install the "OMGuard HD” APP to your device.
For iOS For Android
APP Setup
1. In the Wi-Fi setting section of your smart phone/tablet, search for RVDP SSID
(example: HD-XXXXXX) and connect. The default password is 12345678.
2. Lanuch the app and tap to add RVDP
3. Tap Search to pull in DID information, or enter the DID manually.
4. Enter name for your RVDP (maximum 20 characters).
5. Enter default Security Code 123456.
6. Tap
Save
9
9. Scroll down to Wi-Fi Setting section, select the Wi-Fi router and enter its pas sword.
Important Note:
After the default password entered, the app will remind you to change it, which is strongly
recommended for security purpose.
Advanced Settings
WiFi Setting
Enable notification
WiFi setting will take effect after system reboot.
Management WiFi
Refresh WiFi
Save
(iOS) (Android)
7. Tap and then to enter the advanced setting
8. Tap advanced setting to enter default password:123456
10
In most cases, you can successfully add the camera according to the steps above. However, the
camera will not nd the network if Wi-Fi router turns off the SSID broadcasting function. Please
enable the SSID broadcasting to complete the settings.
Note:
If you do not see your Wi-Fi router in the WI-FI SETTING section, please enable your
router's SSID broadcasting function, which usually is the name of your HOME WI-FI
NETWORK. Most of the Wi-Fi routers broadcast the Service Set Identifier (SSID) by
default.
RVDP can only accept SSID composed with English alphabet characters and Arabic
numbers. Non-English characters (!@#$%^&*) cannot be accepted.
11
MAIN PAGE OVERVIEW
The MAIN PAGE section offers you an overview for RVDP and access to different management
functions.
MAIN PAGE
- List of all registered RVDP.
You can
quickly access preferred RVDP in
the list even when multiple RVDP are
registered by scrolling the list up or
down.
- Tap the camera to enter Live-View.
- The Connection Status (Connected
or Disconnected)is indicated for each
RVDP in the list.
Add RVDP : To add RVDP.
RVDPSetting : Access point for "RVDP Information (enter to nd "Advanced Setting
Section" and "Wi-Fi Reset), "RVDP Delete" and "Event List".
Refresh : Refresh connections of all the RVDP in the list.
Information : Access RVDP/App rmware version information and app PIN Lock setup.
(iOS) (Android)
12
ADD RVDP
Tap to add RVDP. Please refer to page 8 "APP Setup" section for more details.
SETTING
Tap and additional setup selection icons will appear. Tap to exit.
RVDP INFORMATION : Change RVDP name, reset Wi-Fi router setting and access
Advanced Setting section.
DELETE RVDP : Remove the RVDP.
EVENT LIST : View and playback the list of motion triggered event(s) for the particular
RVDP.
(iOS) (Android)
Additional setup
selection
13
SETUP PIN LOCK
MUST enter PIN code when you have enable PIN lock function with launching the APP.
1. Enable "Enable lock when starting" and enter your PIN code.
2. Conrm PIN code entered.
NOTIFY (PUSH NOTIFICATION)
The WAPP camera supports motion detection. When a motion is detected, you’ll receive push
notication on the mobile devices for the event recognized by the camera.
For iOS
If you want to enable/disable it, please follow the steps below:
1. Launch Settings from your Home screen.
2. Tap Notications.
3. Scroll down to nd "OMGuard SensorCam" APP and tap on it.
4. Adjust the notication settings, such as On/Off, Sounds, Alert Display, etc.
Note:
If you forgot the PIN code, please delete and reinstall the app.
Note:
It takes time for the changes to take effect in iOS.
(iOS) (Android)
14
For Android
If you want to enable/disable it, please follow the steps below.
ABOUT APP/API Version Info
Tap the ABOUT icon to check the APP Version when necessary.
Note:
The internet connection and wireless network interference may inuence the performance
of push notication service.
(iOS) (Android)
15
VISITOR CALL-IN PAGE
Call-In Screen
Snapshot
Back to Main Page
Mute
Recording
Live-View
Audio Only
Talk Botton
Door Unlock A
Gate Unlock B
Push-To-Talk
Tap and hold to speak with visitor. No sound will be transmitted if
you let go.
Snapshot
Tap once to capture a single still image of the video coming from
the door unit. The still image les are stored within your mobile
device.
Mute
Tap once to mute the audio coming from the door unit. Tap again
to resume.
Record
Tap once to record the video coming from the door unit. Tap
again to stop recording. The recorded video les are stored
within your mobile device. If you have activated the auto visitor
recording function of the door unit, recorded les are stored onto
the memory card inside the door unit.
Stop Video
When internet connection speed is low, causing delays with
communication with the visitor, you may tap the icon once to stop
the video transmission to free up more bandwidth for audio.
Gate Unlock
Trigger
Tap the icon once and enter "admin password" to remotely open
the gate (3rd party device required).
Door Unlock
Trigger
Tap the icon once and enter "admin password" to remotely open
the door for visitor (3rd party device required).
16
ANSWERING A CALL
21
Above screen would appear When visitor pressed the bell button.
1. Ignore the communication request.
2. Accept the communication request.
Note: For iOS user, due to the system fundamental structural design, you will have to
confirm/accept incoming communication request via pop-ups first before the answering
section would appear. For more details, please refer to the manual.
17
1. Remove the compartment cover with screws.
2. Insert the Micro SD card.
3. Connect power cable by pressing down the power input I/O pins. After supplied power,
the boot
up process will begin (> 2 minutes), the red/green LED will become steady on
after the boot up process is complete (check connectors and power source if red/green
LED do not come on).
I/O Pin
Power cable
Connector
Memory Card Slot
Compartment Cover
1
2
3
Note: For how to connect RVDP with existing doorbell wires, electronic lock/gate, please
refer to "Additional Wiring Diagram" section.
SETUP THE RVDP
18
ADDITIONAL WIRING DIAGRAMS
A. Ethernet (Wet suppiler)
B. Existing Bell Wiring
C. Electronic Lock
D. Electronic Gate (2/4-Wire Type Connection)
Enthernet Cable
DoorBell
Lock
Tx +
Tx -
Rx +
Rx-
Orange / White
Orange
Green / White
Green
Connection Cable Color
--
++
++
--
4-WIRE TYPE CONNECTION DIAGRAM
2-WIRE TYPE CONNECTION DIAGRAM
Powe
Input
Powe
C2
C1
C2
C1
19
Step 1
Conrm position and mount the bracket
via the screws supplied.
Step 2
Place the device on the mounting bracket
.
Step 3
Fastening the
door unit onto
sunshield with
the 1 anti-
theft screws.
MOUNTING THE DOOR UNIT
Do not mount the RVDP until you have complete the Wi-Fi connection setup and have all the wiring
process completed. It is best to test the door unit can function properly with app prior mounting the
door unit.
Please make sure the installation location is free from moisture and wires are not exposed in any
form.
20
Wireless Connectivity Wi-Fi 802.11b/g/n
Transmission Frequency 2.4GHz
Transmission Range Up to 150 Meters (LoS)
Two-Way Audio Yes
One-Way Video Yes
Push Notication Yes / iOS and Android
Event List Yes / Snapshot and Video
Playback App / iOS and Android
Night Vision Supported
Motion Detection Supported
View Angle H:90±3/V:50±3
Audio Input/output Speaker & Microphone
Video Resolution 720P/VGA
Video FPS Up To 25FPS
Data Storage Memory Card (Up to 32GB)
IP Rating IP55
Electronic Door Unlock Trigger Support 3rd Party Device via Wire Connection 12V/1A Power
Output
Electronic Gate Open Trigger Support 3rd Party Device via Dry Contact Trigger
Setup Method Support Quick Setup w/ID & PW Entry from APP (Wi-Fi Direct
Mode)
Power Option AC 7.5V-36V / DC 9V-36V/1A Direct Power Input*
Operating Temperature -22°F/-10°C ~ 122°F/50°C
*For remote door unlock function with 12V/1A current output trigger, the direct input power must be
higher or equal to AC or DC 15V/1.5A.
PRODUCT SPECIFICATION
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Smartwares-VD40W

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smartwares VD40W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smartwares VD40W in de taal/talen: Engels als bijlage per email.

De handleiding is 2,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Smartwares VD40W

Smartwares VD40W Gebruiksaanwijzing - Nederlands - 23 pagina's

Smartwares VD40W Gebruiksaanwijzing - Deutsch - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info