Capacities
Components Model Capacity Fuels, coolants, lubricants,
etc.
Engine with oil
filter
All models 3.6 US qt (3.4 l) Approved engine oils
Cooling system All models approx. 4.5 US qt (4.3 l) Anticorrosion/Antifreeze
meeting specification
MB 325.0
Fuel tank All models 8.72 US gal (33.0 l) Premium unleaded gasoline
(Minimum Posted Octane 91
[Avg. of 96 RON/86 MON])
Fuel tank
reserve
All models approx. 1.32 US gal (5.0 l)
Air condition-
ing system*
All models — R134a refrigerant and spe-
cial PAG lubricant oil
(never R 12)
Windshield
washer system
All models 4.0 US qt (3.8 l) Windshield washer concen-
trate
27
(Y page 222)
Washer fluid mixing ratio
(Y page 222)
Engine oils
Engine oils are specifically tested for
their suitability in our engines and dura-
bility for our service intervals. There-
fore, only use engine oils and oil filters
required for vehicles with the Mainte-
nance System. For a listing of approved
engine oils and oil filters contact an
authorized smart center.
!
Using engine oils and oil filters of
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by
the Maintenance System will result in
engine or emission control system dam-
age not covered by the smart Limited
Warranty.
Please follow Maintenance System rec-
ommendations for scheduled oil changes.
Failure to do so will result in engine or
emission control system damage not cov-
ered by the smart Limited Warranty.
Viscosity grades for engine oils
Using the chart below, select oil viscosity
according to the lowest air temperature
expected before the next oil change.
27
Use a windshield washer concentrate labeled for summer and water for temperatures above freezing
point or a windshield washer concentrate labeled for winter and water for temperatures below freezing
point.
220
Service fluids and capacities
>> Technical data.
* optional
