X
Screw the end of filler hose ? onto tire
valve G.
X
Insert electrical plug B into the aux-
iliary power outlet (Y page 110).
X
Insert the key in the starter switch and
turn it to position 1.
i
The vehicle’s 12‑volt battery is drained
by use of the electric air pump. You
should therefore keep the drive system
running while inflating the tire.
X
Press I on electric air pump switch C.
The electric air pump is switched on and
inflates the tire.
i
First, the sealant is pumped into the
tire. The pressure may briefly increase
to a high value. This is normal and not an
indication of a malfunction. Do not
switch off the electric air pump.
X
Let the electric air pump inflate the tire
for a maximum of ten minutes.
Pressure gauge ; must display at least
180 kPa (1.8 bar, 26 psi).
!
Do not operate the electric air pump
longer than ten minutes without inter-
ruption. Otherwise it may overheat.
You may operate the electrical air pump
again after it has cooled off.
X
If a tire inflation pressure of at least
180 kPa (1.8 bar, 26 psi) is not attained,
turn off the electric air pump by press-
ing 0 on electric air pump switch C.
X
Unscrew the end of filler hose ? from
tire valve G.
X
After clearing the area around the vehi-
cle of people and obstacles, drive vehi-
cle back or forth very slowly approx-
imately 30 ft (10 m).
This serves to better distribute the tire
sealant material inside the tire.
X
Screw the end of filler hose ? onto tire
valve G.
X
Inflate the tire again.
G
WARNING
If a tire inflation pressure of
180 kPa (1.8 bar, 26 psi) is not attained, the
tire is too severely damaged for the tire
sealant to provide a reliable tire repair.
In this case, the tire sealant cannot prop-
erly seal the tire.
Do not drive the vehicle.
Contact the nearest authorized electric
drive smart center for assistance or call
Roadside Assistance.
X
After attaining a tire inflation pressure
of at least 180 kPa (1.8 bar, 26 psi), press
0 on electric air pump switch C.
The electric air pump is switched off.
X
Turn the key in the starter switch to
position 0.
X
Unscrew the end of filler hose ? from
tire valve G.
X
Plug filler hose with the stopper.
X
Tire sealant container E remains
screwed onto flange F.
190
Flat tire
>> Practical hints.
